Siemens Saturn Epabx Oc1e Dyad Digital Telephone User Instructions

							SATURN EPABX A30808-X5051-C150-1-B9i9 
JR-DYAD User Instructions Issue 1, June 1985 
SECTION 6.00 CONFERENCE FEATURES 
6.01 Bridge Call. This feature allows you to enter into an ex- 
isting conversation on a busy line or direct trunk. 
a. To enter an existing conversation: 
1. Select and depress the pickup button associated 
with the busy line or direct trunk. 
2. Pick up the handset. 
l Conference tone is heard by the other parties, 
after which you are connected in a three-way 
conversation. 
NOTE: If the Call Privacy feature is active on the busy line 
or direct trunk, or a three-way connection has al- 
ready been established, bridging is denied and busy 
tone is heard. 
6.02 Meet-Me Conference. This feature allows you to arrange 
a conference of up to seven extensions or four extensions and 
three outside lines. Outside parties are connected to the con- 
ference by the attendant. 
a. To establish a Meet-Me Conference: 
1. Select and depress the appropriate line pickup 
button. 
2. 
l Line pickup button lamp lights steadily. 
Pick up the handset. 
l Dial tone is heard-. 
3. Dial the party you want in the conference. 
l Ringback tone is heard. 
4. When the called party answers, inform the party 
to dial the Meet-Me Conference access code at a 
prearranged time. If the called party is from out- 
side the SATURN System, inform the party to dial 
the SATURN attendant console and have the at- 
tendant transfer the call to the conference by dial- 
ing the Meet-Me Conference access code. 
NOTE: More than one Meet-Me Conference bridge may be 
assigned in the SATURN EPABX. The last digit of 
the access code represents the selected conference 
bridge. 
5. 
6. 
NOTES: Hang up. 
Repeat the above steps for up to seven conferees. 
The attendant only may enter the conference as the 
eighth conferee. 
The maximum number of outside parties allowed 
in the conference at any one time is three (variable 
and assigned by data base management). 
b. To enter the conference: 
1. Select and depress the appropriate line pickup 
button. 2. 
3. 
NOTES: 
l Line pickup button lamp lights steadily. 
Pick up the handset. 
l Dial tone is heard. 
Dial the preannounced Meet-Me Conference fea- 
ture access code or depress the ml feature 
button followed by the conference bridge code. 
l Conference tone is heard; all conferees hear 
the conference tone as you enter the con- 
ference. 
l MEET-ME lamp lights steadily. 
Busy tone is heard if the conference is full. Inter- 
cept tone is heard if the conference bridge is not 
assigned. 
When more than one outside (trunk) call is added, 
transmission quality may be degraded. 
6.03 Station Controlled Conference. This feature allows you 
to establish a conference of up to seven parties. As the Con- 
ference Master, you can add members to the conference, re- 
move members from the conference, leave the conference 
to consult with a conferee privately, call the attendant, or 
release from the conference to allow another conference 
member to take over conference mastership. 
The maximum number of parties allowed in the conference 
is seven; however, the attendant can be added to the confer- 
ence as an eighth party. The maximum number of outside 
parties allowed in the conference at any one time is three (vari- 
able and assigned by data base management). When more 
than one outside (trunk) call is added, transmission quality 
may be degraded. 
a. To establish a conference: 
Select and depress the appropriate line pickup 
button. 
l Line pickup lamp lights steadily. 
Pick up the handset. 
l Dial tone is heard. 
Dial the Station Controlled Conference access 
code. 
l Recall dial tone is heard. 
NOTE: Busy tone is heard if a conference circuit is not avail- 
able. 
4. Dial the number of the party you want to add to 
the conference. 
l Ringback tone is heard. 
NOTE: If the called party does not answer, is busy, or does 
not wish to be included in the conference, you must 
hang up. Your phone then rings and, upon answer, 
you are connected back into the conference. You 
6-l  
						

							SATURN EPABX 
JR-DYAD User instructions A30808-X5051-C150-l-B919 
Issue 1, June 1985 
5. 
6. 
NOTES: 
7. may proceed adding parties to the conference by 
depressing the Xfer Conf button to leave the con- 
ference and following the above procedure begin- 
ning at step 4. 
When the called party answers, inform the party 
of the conference. 
l Ringback tone is removed. 
Depress the Xfer 
conference. I Cod button to add the party to the 
l Conference tone is heard; all conferees hear 
the tone as you and the other party enter the 
conference. 
If you attempt to add more than seven inside par- 
ties or add more than the allowed number of out- 
side parties into the conference, reorder tone is 
heard for approximately 1112 seconds, after which 
you are reconnected to the “would be” conferee. To 
return to the conference, depress the Xfer Conf 
button. 
Any party can leave the conference by hanging up. 
To add each additional party to the conference, 
depress the Xler 
I Cod button to leave the confer- 
ence and follow the above procedure beginning at 
step 4. 
b. To remove any conferee (extension only) from the con- 
ference and consult with the conferee privately: 
1. Depress the 
1 2 1 button to leave the confer- 
ence. 
l Recall dial tone is heard. 
2. Dial the conference member remove code. 
3. Dial the extension number of the conferee to be 
removed. 
l You and the conferee are connected in a pri- 
vate talk state. NOTE: As the conference master, you have the option of 
adding the party back to the conference or remov- 
ing the conferee from the conference totally. To add 
the conferee back into the conference, depress the 
Xfer Conf button; you and the conferee reenter the 
conference. To remove the conferee from the con- 
ference, hang up. Your phone then rings and, upon 
answer, you are connected back into the conference. 
c. To remove the last member added to the conference 
and consult with the conferee privately: 
NOTE: Depress the Xler 
ence. I Cool button to leave the confer- 
l Recall dial tone is heard. 
Dial the last member added access code. 
You and the conferee are connected in a private 
talk state. 
As the conference master, you have the option of 
adding the party back to the conference or remov- 
ing the conferee from the conference totally. To add 
the conferee back into the conference, depress the 
Xfer Conf button; you and the conferee reenter the 
conference. To remove the conferee from the con- 
ference, hang up. Your phone then rings and, upon 
answer, you are connected back into the conference. 
d. To transfer the position of conference mastership to 
another conferee (SATURN EPABX extension only): 
1. Inform the desired conferee that you are releasing 
from the conference, and that conference master- 
ship can be gained by hookswitch flashing 
(depressing the Xfer Conf button, if available) or 
momentarily depressing the hookswitch after you 
hang up. 
2. Hang up. 
NOTE: The first conferee to hookflash now becomes the 
conference master. 
When all parties in the conference hang up, the conference 
circuit is released. 
6-2 (2 pages)  
						

							SATURN EPABX A30808-X5051-C150-i-B919 
JR-DYAD User Instructions Issue 1, June 1985 
SECTION 7.00 CALL FORWARDING FEATURES 
7.01 Call Forwarding - All Calls. This feature allows you to 
have all calls terminating at your JR-DYAD forwarded to 
another extension or to the attendant. 
Activation/deactivation of Call Forwarding - All Calls over the 
prime line: 
a. To forward all incoming calls: 
1. Do not pick up the handset. 
2. Depress the y: 
I feature button. 
l Dial tone is heard over the JR-DYAD speaker. 
3. Dial the extension number to which you want all 
your calls forwarded. 
l Confirmation tone is heard over the speaker. 
l FWD ALL lamp lights steadily. 
NOTE: If intercept tone or reorder tone is heard, your call 
forwarding request was not granted. 
As a reminder that call forwarding is in effect, each time a 
call is forwarded, one short burst of alerting tone is heard from 
your JR-DYAD. 
The party at the forwarded-to extension is allowed to call your 
extension without being forwarded. Further, the party at the 
forwarded-to extension may transfer a call back to your ex- 
tension or leave a message waiting indication (if message 
waiting capability is provided). 
You may continue to originate calls while Call Forwarding - 
All Calls is in effect. Automatic callbacks from the activation 
of features such as Internal Call Queuing - Callback and Out- 
going Call Queuing - Callback, and station recalls are not 
forwarded. 
b. To cancel Call Forwarding - All Calls: Depress the 
FVVD 
I ALL feature button. 
l FWD ALL lamp extinguishes. 
Activation/deactivation of Call Forwarding -All Calls over any 
line appearing on the JR-DYAD (if allowed by class of service). 
a. To forward all incoming calls: 
Select and depress the appropriate line pickup 
button. 
l Line pickup button lamp lights steadily. 
Pick up the handset. 
l Dial tone is heard. 
Depress the FWD 
El ALL feature button or dial the 
Call Forwarding - All Calls activation code. 
Dial the extension number to which you want all 
your calls forwarded. 
l Confirmation tone is heard indicating that the 
Call Forwarding - All Calls feature is active. 
NOTE: If. intercept tone or reorder tone is heard, your call 
forwarding request was not granted. 
5. Hang up. 
As a reminder that call forwarding is in effect, each time a 
call is forwarded, one short burst of alerting tone is heard from 
your JR-DYAD (prime line only). 
The party at the forwarded-to extension is allowed to call your 
extension without being forwarded. Further, the party at the 
forwarded-to extension may transfer a call back to your ex- 
tension or leave a message waiting indication (if message 
waiting capability is provided). 
You may continue to originate calls while Call Forwarding - 
All Calls is in effect. Automatic callbacks from the activation 
of features such as Internal Call Queuing - Callback and Out- 
going Call Queuing - Callback, and station recalls are not 
forwarded. 
b. To cancel Call Forwarding - All Calls: 
1. Select and depress the line pickup button from 
which Call Forwarding 
l Line pickup button 
2. Pick up the handset. 
l Dial tone is heard. - All Calls was activated. 
lamp lights steadily. 
3. Dial the call forwarding cancellation code. 
l Confirmation tone is heard indicating that the 
Call Forwarding - All Calls feature has been 
cancelled. 
4. Hang up. 
7.02 Call Forwarding to Public Network. This feature allows 
you to have all calls terminating at your JR-DYAD forwarded 
to an outside destination number. 
a. To forward all calls: 
Select and depress the appropriate line pickup 
button. 
l Line pickup button lamp lights steadily. 
Pick up the handset. 
l Dial tone is heard. 
Dial the Call Forwarding to Public Network activa- 
tion code. 
Dial the trunk group access code (e.g. “9” for out- 
side) and the outside number (e.g. 9948800). 
l After a short pause (approximately five se- 
conds), confirmation tone is heard indicating 
that the Call Forwarding to Public Network fea- 
ture is active. 
7-l  
						

							SATURN EPABX 
JR-DYAD User Instructions 
NOTES: You may expedite receiving confirmation tone by 
depressing the # key immediately after dialing the 
last digit of the outside number. 
If intercept tone or reorder tone is heard, your call 
forwarding request was not granted. 
5. Hang up. 
As a reminder that call forwarding is in effect, each time a 
call is forwarded, one short burst of alerting tone is heard from 
your JR-DYAD. 
You may continue to originate calls while Call Forwarding to 
Public Network is in effect. Automatic callbacks from the ac- 
tivation of features such as Internal Call Queuing - Callback 
and Outgoing Call Queuing - Callback, and station recalls 
are not forwarded. 
b. To cancel Call Forwarding to Public Network: 
1. Select and depress the line pickup button from 
which Call Forwarding to Public Network was ac- 
tivated. 
l Line pickup button lamp lights steadily. 
2. Pick up the handset. 
l Dial tone is heard. 
3. Dial the call forwarding cancellation code. 
l Confirmation tone is heard indicating that the 
Call Forwarding to Public Network feature has 
been cancelled. 
4. Hang up. 
7.03 Call Forwarding - Busy Lines. This feature allows you 
to have all calls terminating at your JR-DYAD forwarded to 
another extension or to the attendant when your extension 
is busy. When your JR-DYAD is idle, incoming calls are com- 
pleted as usual. 
Activation/deactivation of Call Forwarding - Busy Lines over 
the prime line: 
a. To forward incoming calls: 
Do not pick up the handset. 
Depress the FWD 
I BUSY feature button. 
l Dial tone is heard over the speaker. 
Dial the extension number to which you want your 
calls forwarded. 
l Confirmation tone is heard over the speaker. l FWD BUSY lamp lights steadily. 
NOTE: If intercept tone or reorder tone is heard, your call 
forwarding request was not granted. 
When Call Forwarding - Busy Lines is in effect incoming calls 
will not wait (via Internal Call Queuing - Standby and Inter- 
nal Call Queuing Callback) on your prime line. If the 
forwarded-to telephone is busy, forwarded calls will wait at 
the forwarded-to telephone. A30808-X5051-C150-l-B919 
Issue 1, June 1985 
b. To cancel Call Forwarding - Busy Lines: Depress 
the feature button 
l FWD BUSY lamp extinguishes. 
Activation/deactivation of Call Forwarding - Busy Lines over 
any line appearing on the JR-DYAD (if allowed by class of 
service): 
a. To forward incoming calls: 
Select and depress the appropriate line pickup 
button. 
l Line pickup button lamp lights steadily. 
Pick up the handset. 
l Dial tone is heard. 
Depress the feature button or dial the 
Call Forwarding - Busy Lines activation code. 
Dial the extension number to which you want your 
calls forwarded. 
l Confirmation tone is heard indicating that the 
Call Forwarding - Busy Lines feature is active. 
NOTE: If intercept tone or reorder tone is heard, your call 
forwarding request was not granted. 
5. Hang up. 
When Call Forwarding - Busy Lines is in effect, incoming calls 
will not wait (via Internal Call Queuing - Standby and Inter- 
nal Call Queuing Callback) on the associated line. If the 
forwarded-to telephone is busy, forwarded calls will wait at 
the forwarded-to telephone. 
b. To cancel Call Forwarding - Busy Lines: 
1. Select and depress the line pickup button from 
which Call Forwarding - Busy Lines was activated. 
l Line pickup button lamp lights steadily. 
2. Pick up the handset. 
l Dial tone is heard. 
3. Dial the call forwarding cancellation code. 
l Confirmation tone is heard indicating the Call 
Forwarding - Busy Lines feature has been can- 
celled. 
4. Hang up. 
7.04 Call Forwarding - No Answer. This feature allows you 
to have all calls terminating at your JR-DYAD that are not an- 
swered within a predetermined period of time (three rings, 
nominal), forwarded to another telephone or to the attendant. 
When your JR-DYAD is busy, call forwarding does not occur 
and the usual station hunting, call waiting, and automatic call- 
back arrangements (if assigned) are applied. 
Activation/deactivation of Call Forwarding - No Answer over 
the prime line. 
7-2  
						

							A30808-X5051-C150-l-B919 
Issue 1. June 1985  SATURN EPABX 
JR-DYAD User Instructions 
a. To forward incoming unanswered calls: 
1. 
2. 
3. Do not pick up the handset. 
Depress the N& feature button. 
cl 
l Dial tone is heard over the speaker. 
Dial the extension number to which you want your 
calls forwarded. 
l Confirmation tone is heard over the speaker. l FWD NO ANS lamp lights steadily. 
NOTE: If intercept tone or reorder tone is heard, your call 
forwarding request was not granted. 
You may continue to originate calls while the Call Forward- 
ing - No Answer feature is in effect. Automatic callbacks from 
the activation of features such as Internal Call Queuing - Call- 
back and Outgoing Call Queuing - Callback, and station 
recalls are not forwarded. 
b. To cancel Call Forwarding - No Answer: Depress 
‘the 
I NyA\s feature button. 
l FWD NO ANS lamp extinguishes. 
Activation/deactivation of Call Forwarding - No Answer over 
any line appearing on the JR-DYAD (if allowed by class of 
service). 
a. To forward incoming unanswered calls over any line 
appearing on your JR-DYAD: 
1. 
2. 
3. 
4. 
NOTE: 
5. Select and depress the appropriate line pickup 
button. 
l Line pickup button lamp lights steadily. 
Pick up the handset. 
l Dial tone is heard. 
Depress the &,PNs 
I feature button or dial the 
Call Forwarding - No Answer activation code. 
Dial the extension number to which you want your 
unanswered calls forwarded. 
l Confirmation tone is heard indicating that the 
Call Forwarding - No Answer feature is active. 
If intercept tone or reorder tone is heard, your call 
forwarding request was not granted. 
Hang up. 
You may continue to originate calls while Call Forwarding - 
No Answer is in effect. Automatic callbacks from the activa- 
tion of features such as Internal Call Queuing - Callback and 
Outgoing Call Queuing - Callback, and station recalls are not 
forwarded. 
b. To cancel Call Forwarding - No Answer: 
1. Select and depress the line pickup button from 
which Call Forwarding - No Answer was activated. 
l Line pickup button lamp lights steadily. 
2. Pick up the handset. 
l Dial tone is heard. 
3. Dial the call forwarding cancellation code. 
l Confirmation tone is heard indicating that the 
Call Forwarding - No Answer feature has been 
cancelied. 
4. Hang up. 
7.05 Call Forwarding - Secretarial. This feature allows you 
to have all calls terminating at your JR-DYAD forwarded to 
another predetermined SATURN extension (assigned by data 
base management). 
Activation/deactivation of Call Forwarding - Secretarial over 
the prime line: 
a. To forward all incoming calls: 
1. Do not pick up the handset. 
2. Depress the 
sl rwDTo feature button 
l FWD TO lamp lights steadily. 
As a reminder that call forwarding is in effect, each time a 
call is forwarded, one short burst of alerting tone is heard from 
your JR-DYAD. 
The party at the forwarded-to extension is allowed to call your 
extension without being forwarded. Further, the party at the 
forwarded-to extension may transfer a call back to your ex- 
tension or leave a message waiting indication (if message 
waiting capability is provided). 
You may continue to originate calls while Call Forwarding - 
Secretarial is in effect. Automatic callbacks from the activa- 
tion of features such as Internal Call Queuing - Callback and 
Outgoing Call Queuing - Callback, and station recalls are not 
forwarded. 
b. To cancel Call Forwarding - Secretarial: Depress the 
El FWD To feature button. 
l FWD TO lamp extinguishes indicating that the Call 
Forwarding - Secretarial feature has been cancelled. 
Activation/deactivation of Call Forwarding - Secretarial over 
any line appearing on the JR-DYAD (if allowed by class of 
service): 
a. To forward all incoming calls: 
Select and depress the appropriate line pickup 
button. 
l Line pickup button lamp lights steadily. 
Pick up the handset. 
l Dial tone is heard. 
Depress the 
El FWDTo feature button or dial the 
Call Forwarding - Secretarial activation code. 
7-3  
						

							SATURN EPABX 
JR-DYAD User Instructions 
l Confirmation tone is heard indicating that the 
Call Forwarding - Secretarial feature is active. 
NOTE: 
If intercept tone or reorder tone is heard, your call 
forwarding request was not granted. 
5. Hang up. 
As a reminder that call forwarding is in effect, each time a 
call is forwarded, one short burst of alerting tone is heard from 
your JR-DYAD. 
The party at the forwarded-to extension is allowed to call your 
extension without being forwarded. Further, the party at the 
forwarded-to extension may transfer a call back to your ex- 
tension or leave a message waiting indication (if message 
waiting capability is provided). 
You may continue to originate calls while Call Forwarding - 
Secretarial is in effect. Automatic callbacks from the activa- 
tion of features such as Internal Call Queuing - Callback and 
Outgoing Call Queuing - Callback, and station recalls are not. 
forwarded. 
b. To cancel Call Forwarding - Secretarial: 
1. Select and depress the line pickup button from 
which Call Forwarding - Secretarial was activated. 
l Line pickup button lamp lights steadily. 
2. Pick up the handset. 
l Dial tone is heard. 
3. Dial the call forwarding cancellation code. 
l Confirmation tone is heard indicating that the 
Call Forwarding - Secretarial feature has been 
cancelled. 
4. Hang up. 
7.06 Call Forwarding - Return. This feature allows you to 
transfer a forwarded-call to the extension that activated call 
forwarding. 
To return a forwarded-call: A30808-X5051-C150-l-0919 
Issue 1, June 1985 
a. First ask the connected party to wait. 
b. Depress the Xler 
L---l Conf feature button. 
l Recall dial tone is heard. 
c. Dial the Call Forwarding - Return access code. 
. 
NOTES: Ringback tone is heard. 
If busy tone is heard or the party does not answer, 
depress the Xfer Conf button to return to the held 
pa% 
When an outside party requests to be transferred 
to an extension and the extension is busy,.you may 
invoke the Internal Call Queuing - Standby feature. 
This feature allows you to camp-on to the busy ex- 
tension and wait for the party to answer. 
If you desire to transfer the call before the called 
party answers (ringback tone must heard), hang up 
the handset. The held party hears ringback tone and 
waits for the called party to answer. If the party be- 
ing transferred is an “outside” party and the called 
party does not answer within a preset time the call 
is automatically recalled to your JR-DYAD (three- 
burst alerting tone is heard), if idle, otherwise to the 
attendant. To answer/return to the held call, pick up 
the handset. 
d. When the party at the forwarding station answers, an- 
nounce the transfer. 
l Ringback tone is removed. 
e. Hang up. 
l The call is transferred to the called party. 
7.07 Forced Call Forwarding. This feature allows you to for- 
ward a waiting or ringing call on your prime line extension 
to another preassigned SATURN extension. Waiting or ring- 
ing calls on other lines appearing at your JR-DYAD cannot 
be forwarded. 
To forward a waiting or ringing call: Depress the 
feature button. 
7-4 (4 pages)  
						

							SATURN EPABX 
JR-DYAD User Instructions 
SECTION 8.00 CALL QUEUING FEATURES 
A30808-X5051-C150-l-B919 
Issue 1, June 1985 
8.01 Internal Call Queuing - Callback. This feature allows 
you, upon dialing a busy extension number, to enter into a 
queue, hang up, and be called back when the extension be- 
comes available. 
a. To establish an automatic callback condition: 
1. You have dialed a busy extension and busy tone 
is heard. 
2. Do not hang up. Listen to busy tone until busy tone 
changes to a steady low tone (approximately 5 se- 
conds). Steady low tone is confirmation that you 
have invoked callback queuing. 
3. Hang up. 
You may originate or receive other calls while waiting for the 
callback; however, the callback sequence does not take place 
until both your extension and the previously dialed extension 
are idle at the same time. 
Only one callback request (Internal or Outgoing Call Queu- 
ing - Callback) is allowed at any one time. If a second call- 
back is initiated, the original callback is automatically 
cancelled. 
4. When both the called extension and your exten- 
sion become idle: 
l Three-burst alerting tone is heard. 
NOTE: If you do not answer the callback attempt within ap- 
proximately 18 seconds, callback queuing is auto- 
matically cancelled. 
5. Pick up the handset. 
l Ringback tone is heard. 
l Called extension rings. 
6. When the called party answers, you may begin to 
talk. 
b. To cancel an automatic callback: 
1. Pick up the handset. 
l Dial tone is heard. 
2. Dial the automatic callback cancellation code. 
l Confirmation tone is heard, indicating the can- 
cellation of the callback. 
3. Hang up. 
8.02 Internal Call Queuing - Standby. This feature allows 
you, upon dialing a busy extension, to enter into a queue and 
wait for the called party to answer. While in the standby queue, 
you hear special ringback tone and the called party hears call 
waiting tone. 
a. To establish a standby queuing condition: 
1. You have dialed a busy extension and busy or spe- 
cial ringback tone is heard. NOTE: 
2. 
NOTE: 
3. 
4. 
NOTE: 
5. On some telephones, Internal Call Queuing - Stand- 
by is activated on an automatic originating or auto- 
matic terminating basis. If your JR-DYAD is assigned 
the automatic originating option or the called party’s 
telephone is assigned the automatic terminating op- 
tion, ignore.the remainder of this procedure. When 
special ringback tone is heard simply wait for the 
called party to answer. 
Do not hang up. Listen to busy tone until it changes 
to a steady low kone (approximately 5 seconds). 
Steady low tone is confirmation that callback queu- 
ing can be invoked, if desired, by hanging up. Refer 
to the feature, “Internal Call Queuing Callback.” 
Again, do not hang up. Wait until steady low tone 
changes to special ringback tone (approximately 
5 seconds more). This is confirmation that you have 
been placed in the standby queuing mode. 
l The called party hears ‘call waiting tone. 
Wait until the called party answers the waiting call. 
You may convert from standby queuing to callback 
queuing, any time, by hanging up. Refer to the fea- 
ture, “Internal Call Queuing - Callback.” 
When the called party answers, you may begin to 
talk. 
8.03 Outgoing Call Queuing - Callback. This feature allows 
you, upon dialing a busy outgoing trunk group, to enter into 
a queue, hang up, and be called back when a trunk becomes 
available. 
This feature applies to direct trunk group access only. For 
Least Cost Routing (LCR) access, refer to the feature, “Least 
Cost Routing.” 
a. To activate Outgoing Call Queuing - Callback: 
1. You have dialed a trunk group access code (e.g., 
“9’: “82’: “83’: etc.) and encountered busy tone. 
2. Do not hang up. Listen to busy tone until you hear 
steady low tone (approximately 5 seconds). Steady 
low tone is confirmation that you have invoked call- 
back queuing. 
3. Hang up. 
You can originate or receive calls while callback queuing is 
active. When a trunk becomes available and your JR-DYAD 
is idle, a callback is attempted. 
Only one callback request (Internal or Outgoing Call Queu- 
ing - Callback) is allowed at any one time. If a second auto- 
matic callback is initiated, the original callback is automatically 
cancelled. 
4. When a trunk becomes available: 
l Three-burst alerting tone is heard. 
8-l  
						

							SATURN EPABX A30808-X5051-C150-l-B919 
JR-DYAD User Instructions Issue 1, June 1985 
NOTE: If you do not answer the callback attempt within ap- 
proximately 18 seconds, callback queuing is auto- 
matically cancelled. 
5. Pick up the handset. 
l Dial tone is heard. 
6. Complete dialing the desired number (do not redi- 
al the trunk group access code). 
b. To cancel an automatic callback: 
1. Pick up the handset. 
l Dial tone is heard. 
2. Dial the automatic callback cancellation code. 
l Confirmation tone is heard, indicating the can- 
cellation of the callback. 
3. Hang up. 
8.04 Outgoing Call Queuing - Standby. This feature allows 
you, upon dialing a busy outgoing trunk group, to enter into 
a queue and wait for a trunk to become available. 
This feature applies to direct trunk group access only. For 
Least Cost Routing (LCR) access, refer to the feature, “Least 
Cost Routing.” a. To activate Outgoing Call Queuing - Standby: 
1. You have dialed a trunk group access code (e.g., 
“9’: “82’: “83”, etc.) and encountered busy tone. 
2. Do not hang up. Listen to busy tone until you hear 
NOTE: 
3. 
4. 
NOTE: 
5. steady low-tone (approximately 5 seconds). 
Steady low tone is confirmation that callback queu- 
ing can be invoked, if desired, by hanging up. Refer 
to the feature, “Outgoing Call Queuing Callback.” 
Again, do not hang up. Wait until steady low tone 
changes to silence, or music if provided (approxi- 
mately 5 seconds more). This is confirmation that 
Eid;ave been placed in the standby queuing 
Continue to listen to silence (or music) until a trunk 
becomes available. 
l Dial tone is heard when a trunk becomes 
available. 
You may convert from standby queuing to callback 
queuing, any time, by hanging up. Refer to the fea- 
ture, “Outgoing Call Queuing - Callback.” 
Upon hearing dial tone, complete dialing the 
desired number (do not redial the trunk group ac- 
cess code). 
8-2 (2 pages)  
						

							SATURN EPABX 
JR-DYAD User Instructions 
SECTION 9.00 CALL PICKUP -FEATURES 
A30808-X5051-C150-l-B919 
issue 1, June 1985 
9.01 Call Pickup - Directed. This feature allows you to an- 
swer an incoming call that is ringing at another telephone. 
a. To answer a call ringing at another telephone: 
1. Select and depress the appropriate line pickup 
button. 3. 
-4. 
l Line pickup button lights steadily. 
2. Pick up the handset. 
l Dial tone is heard. 5. Depress the 
C.all Pickup - Directed feature access code. 
Dial the extension number of the telephone that 
is ringing. 
l Ringing ceases at the other telephone and you 
are automatically connected to the incoming 
call. 
You may begin to-talk. 
9-1 (9-2 blank)  
						

							SATURN EPABX 
JR-DYAD User Instructions 
SECTION 10.00 DIRECT ACCESS FEATURES 
A30808-X5051-C150-l-B919 
Issue 1. June 1985 
10.01 Direct Station Selection. The Direct Station Selection 
(DSS) feature allows you to place a call to a party at a 
predesignated SATURN extension by depressing a dedicat- 
ed feature button instead of dialing the party’s extension 
number. 
a. To place a DSS call: 
1. Determine if the extension to be called is idle (a 
lighted DSS lamp indicates the extension is busy 
and a dark lamp indicates the extension is idle). 
2. Select and depress a line pickup button. 
l Line pickup lamp lights steadily. 
3. Pick up the handset. 
l Dial tone is heard. 
4. Depress the appropriate DSS feature button. 
l Ringback tone is heard. l The DSS lamp flashes. 
5. When the called party answers, you may begin to 
talk. 
10.02 Direct Trunk Group Selection.This feature allows you 
to access an idle trunk in a designated trunk group by 
depressing a Direct Trunk Group Selection pickup button. The 
busy/idle status of the trunk group is indicated by the lamp 
associated with the pickup button. No incoming calls can ter- 
minate on this pickup button. 
a. To establish an outside call: 
1. Determine if a trunk is available in the trunk group 
associated with the type of outside call to be di- 
aled (e.g., Central Office, Florida WATS, National 
WATS, etc.). The busy/idle status of the trunk group 
is as follows: 
(a) Direct Trunk Group Selection lamp dark - At 
least one trunk is idle in the trunk group. 
(b) Direct Trunk Group Selection lamp lighted - All 
trunks in the trunk group are busy. 
2. If a trunk is available, depress the associated Direct 
Trunk Group Selection pickup button. 
l The associated Direct Trunk Group Selection 
lamp momentarily lights steadily and remains 
lighted if all trunks in the trunk group are busy. 
NOTE: If other station instruments are provided with the 
same Direct Trunk Group Selection button, the as- 
sociated lamp on their telephone remains dark un- 
less that was the last idle trunk in the trunk group. 
3. Pick up the handset. 
l Dial tone is heard. 4. Dial the desired number. 
10.03 Direct Trunk Selection. This feature allows you to 
originate or receive calls over a specific trunk by depressing 
a pickup button on your JR-DYAD. The busy/idle status of the 
trunk is indicated by the lamp associated with the pickup 
button. 
a. To establish an outside call: 
1. Determine if the trunk is busy or idle. The busy/idle 
status of the desired trunk is as follows: 
(a) Direct Trunk Selection lamp dark -Trunk is idle. 
(b) Direct Trunk Selection lamp lighted - Trunk is 
busy. 
2. If the trunk is idle, depress the associated Direct 
Trunk Selection pickup button. 
l Direct Trunk Selection lamp lights steadily. 
NOTE: If other station instruments are provided with the 
same Direct Trunk Selection button, the associat- 
ed lamp on their telephone remains dark unless that 
was the last idle trunk in the trunk group. 
3. Pick up the handset. 
l Dial tone is heard. 
4. Dial the desired outside number. 
b. To answer an incoming call: 
1. The Direct Trunk Selection lamp flashes and your 
JR-DYAD provides call alerting tone. 
2. Depress the associated Direct Trunk Selection pick- 
up button. 
l The Direct Trunk Selection lamp lights steadily. 
3. Pick up the handset. 
4. You may begin to talk. 
10.04 Station-Defined Direct Dial. This feature allows you 
to depress a dedicated feature button and have the SATURN 
System automatically dial the telephone number (inside or 
outside number) assigned to that button. One or more of these 
feature buttons may be assigned to your JR-DYAD. Each but- 
ton is assigned to a telephone number in SATURN EPABX 
memory. 
On some JR-DYADs, the destination number may be changed 
by using the Speed Calling - Individual feature. At these sta- 
tions, the destination number is indexed to one of the speed 
calling codes (O-9). To change the destination number as- 
sociated with the speed calling code, refer to the operating 
instructions of the Speed Calling - Individual feature. 
a. To initiate a call to the stored number: 
1. Select and depress the appropriate line pickup 
button. 
10-l