Home > Siemens > Telephone > Siemens Saturn Epabx Oc1e Dyad Digital Telephone User Instructions

Siemens Saturn Epabx Oc1e Dyad Digital Telephone User Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Siemens Saturn Epabx Oc1e Dyad Digital Telephone User Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 428 Siemens manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							at+i unl
     crtikm CMU Procedures 
    CUSTOMER MEMORY UPDATE PROCEDURE: TRAFCTR 
    TITLE: Traffic Metering Counter Assignments 
    Table 802.13 System Peg Counters: SYSP (Continued) Page 8 of 12 
    ALPHAMERIC COUNTER 
    INPUT DESCRIPTION 
    3ALLHOLD 
    PARK6 
    PARK 
    PICKUPDIRE 
    PUDIR 
    PICKUPGRPB 
    PUGRP 
    PRIVB 
    CALLTIMERB 
    XFER 
    STNCW 
    CWREJ 
    STNCMPLT 
    CBQCAN 
    NOANS 
    STNBSY 
    CODECALL 
    CNSTBY 
    CNHLDB 
    CONSHOLD 
    DIDAB 
    DIDCMPLT 
    DIDBSY 
    DISAAB 
    DlSABSY 
    ‘;ACMPLT 
    cr 
    JTMFATMPT 
    XMFBSY 
    [ITDELAY 
    DICTB 
    DICT 
    DSSB 
    DIRTKB 
    DNDB 
    ‘-lOLDEXCLB 
    COMDIALB 
    3VERRIDEB 
    VDFORCEB 
    ZNF4PBSY 
    AANDSFREEB 
    IUSEB 
    RLTINCQ 
    FAIL 
    ATTEMPT 
    LCRA 
    LCRD 
    LCRS 
    LCRT 
    LASTNOB 
    LINEXTB 
    LOCKOUT 
    HOLDB 
    ICOMMANB 
    BUZZB 
    ‘EETMEB 
    l- 
    Call Hold. 
    Call Park Button. 
    Call Park. 
    Call Pickup - Directed Button. 
    Call Pickup - Directed. 
    Call Pickup - Group Button. 
    Call Pickup - Group. 
    Call Privacy Button. 
    Call Timer Button. 
    Call Transfer. 
    Call Waiting - Station. 
    Call Waiting Reject Button. 
    Call to Station Complete. 
    Callback Queuing Cancel. 
    Calls Abandoned - No Answer. 
    Calls to Station Busy. 
    Code Call Accessed. 
    Conference Station Busy. 
    Consultation Hold Button. 
    Consultation Hold. 
    DID Calls Abandon. 
    DID Calls Complete. 
    DID Calls to Busy Destination. 
    D!SA Calls Abandon. 
    DISA Calls Busy Condition. 
    DISA Calls Completed. 
    DPI-Entered SMDR Account Code. 
    DTMF Receiver Allocation Attempts. 
    DTMF Receivers All Busy. 
    Dial Tone Delay. 
    Dictation Button. 
    Dictation. 
    Direct Station Selection Button. 
    Direct Trunk Pickup Button. 
    Do Not Disturb Button. 
    Exclusive Hold Button. 
    Executive Intercom Pickup Button. 
    Executive Override Button. 
    Forced Call Forwarding Button. 
    Four-Port Conference Busy. 
    Hands-Free Operation Button. 
    I-Use Button. 
    Incoming Trunk Calls Routed to the CAS Attendant 
    via RLT 
    Internal Call Failures. 
    Internal Origination Attempt. 
    LCR Attendants. 
    LCR DISA Trunks. 
    LCR Stations. 
    LCR Tie Trunks. 
    Last Number Redial Button. 
    Line Extension Pickup Button. 
    Line Lockout. 
    Manual Hold Button. 
    Manual Intercom Pickup Button. 
    Manual Signaling Button. 
    Meet-Me Conference Button. ATT 
    X IUNTI 
    DPI 
    X 
    X 
    X 
    X 
    X 
    X 
    X 
    X 
    X 
    X 
    X 
    X 
    X 
    X 
    X 
    X 
    :: 
    X 
    X 
    X 
    X 
    X 
    X TYPE 
    STA 
    x - 
    X 
    X 
    X 
    X 
    X 
    :: 
    X 
    X 
    X 
    X 
    X 
    X 
    X 
    X 
    X 
    X 
    X 
    X 
    X 
    X rRMS  
    						
    							&+I “l-l,
     trt%cu CMU Procedures 
    I ..,vII- XI”.,“. LiLl U-r,., 
    issue 3, January 1986 
    CUSTOMER MEMORY UPDATE PROCEDURE: TRAFCTR 
    TITLE: Traffic Metering Counter Assignments 
    Table 802.13 System Peg Counters: SYSP (Continued) Page 9 of 12 
    ALPHAMERIC COUNTER COUNTER TYPE 
    INPUT DESCRlPTlON 
    ATT DPi 
    STA TRKS 
    /lMCONF Meet-Me Conference. X 
    /lSGSETB Message Waiting Activate But?on. x 
    /lSGSET Message Waiting Activate. 
    /lSGCB Message Waiting Automatic Callback. :: 
    /ISGCALLBKB Message Waiting Callback Button. X 
    /lSGCANCELB Message Waiting Cancel Button. X 
    ASGCAN Message Waiting Cancellation. X 
    IFFHKALM Off-Hook Alarm Calls. X 
    IHKDL On-Hook Dialing Button. 
    iLTOPRQ Operator Calls Routed to CAS Attendant via RLT. X 
    I’ X 
    ‘AGE1 Paging - Zone 1. X 
    ‘AG E2 Paging - Zone 2. X 
    ‘AG E3 Paging - Zone 3. X 
    ‘AG E4 Paging - Zone 4. X 
    ‘AGEB Paging Button. X 
    ‘AGE Paging. X 
    ‘ILOT Pilot Number Access. X 
    rALKB Push-to-Talk Button. X 
    3LTRCLQ Recalls Routed to CAS Attendant via RLT X 
    ?LSB Release Button. ~ .j. 
    X 
    %NGEROFFB Ringer Cutoff Button. X 
    SAVENOB Saved Number Redial Button. X 
    SLUMBER Slumber Time Calls Diverted. X 
    \JOCDRB SMDR Emergency Call Buffer Attempts Ending in Failure. X 
    SPEEDGRPlB Speed Calling - Group 1 Button. X 
    3CGl Speed Calling - Group 1. X 
    SPEEDGRP2B Speed Calling - Group 2 Button. X 
    3CG2 Speed Calling - Group 2. X 
    SPEEDGRPSB Speed Calling - Group 3 Button. X 
    3CG3 Speed Calling - Group 3. X 
    SPEEDGRP4B Speed Calling - Group 4 Button. X 
    SCG4 Speed Calling - Group 4. X 
    SPEEDINDB Speed Calling - Individual Button., X 
    SCIND Speed Calling - Individual. X 
    STNCBQ Station Camp-On with Callback. X 
    STNCONFRMV Station Conference Member Removal. X 
    STNCONF Station-Controlled Conference. X 
    DIALB Station-Defined Direct Dial Button. X 
    TIEAB Tie Trunk Calls Abandoned. X 
    TIECMPLT Tie Trunk Calls Complete. X 
    TIEBSY Tie Trunk Calls to Busy Destination. X 
    TIMEB Time Display Button. X 
    SETALARMB Timed Reminder Button. 
    XFEROB Transfer to Attendant Button. :: 
    TRKCBQ Trunk Callback Queuing. X 
    TRKORIGB Trunk Group (Originating) Pickup Button. X 
    TRKTERMB Trunk Group (Terminating) Pickup Button. X 
    TRKSBYQ Trunk Standby Queuing. X 
    UNAB 
    Universal Night Answer Button. 
    VCDIALB Voice Calling - Dial Pickup Button. :: 
    VCDSSB 0 
    Voice Call DSS Pickup Button. X 
    VOICEREJB Voice Call Rejected Button. X 
    ZUNA Zoned Universal Night Answer. X 
    MSGGRAMB RESERVED FOR FUTURE USE. X  
    						
    							bhii UtW EPAtJX ,-wuuvu-~~S~d 4-c 1~u-G-03 iJ 
    CMU Procedures issue 3, January 1986 
    CUSTOMER MEMORY UPDATE PROCEDURE: TRAFCTR 
    TITLE: Traffic Metering Counter Assignments 
    Page 10 of 12 
    Table 802.14 System Usage Counters: SYSU 
    ALPHAMERIC INPUT COUNTER DESCRIPTION 
    NOTE: Eleven counters per system. 
    ALL 
    ATTCONF 
    CONF4P 
    DICT 
    DTMF 
    MMCONF 
    PAGE1 
    PAGE2 
    PAGE3 
    PAGE4 
    STNBSY 
    STNCONF All System Usage Counters. 
    Attendant Conference. 
    Conference - 4-Port. 
    Dictation. 
    DTMF Receivers. 
    Meet-Me Conference. 
    Paging - Zone 1. 
    Paging - Zone 2. 
    Paging - Zone 3. 
    Paging - Zone 4. 
    Stations Busy. 
    Station-Controlled Conference. 
    Table 802.15 Trunk Group Data Peg Counters: TKDP 
    ALPHAMERIC INPUT COUNTER DESCRIPTION 
    ., _ 
    NOTE: Four counters per trunk group. 
    ALL 
    SBYQ 
    BSY 
    ‘NC 
    JUT All Trunk Group Data Peg Counters. 
    Data Call Standby Queuing Activations. 
    .Data Calls Encountering All Trunks Busy. 
    Incoming Data Calls. 
    Outgoing Data Calls. 
    Table 802.16 Trunk Group Data Usage Counters: TKDU 
    ALPHAMERIC INPUT COUNTER DESCRIPTION 
    NOTE: Three counters per trunk group. 
    ALL All Trunk Group Data Usage Counters. 
    SBYQ Data Call Standby Queuing Holding Time. 
    INC Incoming Data Call Usage. 
    OUT Outgoing Data Call Usage. 
    Table 802.17 Trunk Group Peg Counters: TRKP 
    ALPHAMERIC INPUT COUNTER DESCRIPTION 
    NOTE: Seven counters per trunk group. 
    ALL 
    All Trunk Group Peg Counters. 
    BSY 
    INC All Trunks in Group Busy. 
    OUT Incoming Trunk Call. 
    CBQ Outgoing Trunk Call. 
    PCKORG Trunk Callback Queuing. 
    PCKTRM Trunk Group Pickup Button Originating. 
    SBYQ Trunk Group Pickup Button Terminating. 
    Trunk Standby Queuing.  
    						
    							2+irunrv trHt2n ,,-..-b., ..“1”. _.-- _ -., _ CMU Procedures Issue 3, January 1986 
    CUSTOMER MEMORY UPDATE PROCEDURE: TRAFCTR 
    TITLE: Traffic Metering Counter Assignments 
    Table 802.18 Trunk Group Usage Counters: TRKU Page 11 of 12 
    ALPHAMERIC INPUT COUNTER DESCRIPTION 
    NOTE: Four counters per trunk group. 
    ALL 
    INC 
    OUT 
    CBQ 
    s RVr3 All Trunk Group Usage Counters. 
    Incoming Trunk. 
    Outgoing Trunk. 
    Trunk Callback Queuing. 
    Trunk Standbv Queuina. 
    I 
    Table 802.19 Health Care Pea Counters: HCP 
    All Health Care Peg Counters. 
    Attendant to Attendant. 
    Attendant to Nonpatient. 
    Attendant to Patient. 
    Attendant to Trunk. 
    Nonpatient to Attendant. 
    Nonpatient to Nonpatient. 
    Nonpatient to Patient. 
    ., . . 
    Nonpatient to Trunk. 
    Patient to Attendant. 
    Patient to Nonpatient. 
    Patient to Patient. 
    Patient to Trunk. 
    Total of all Health Care Peg Counters. 
    Trunk to Attendant. 
    Trunk to Nonpatient. 
    Trunk to Patient. 
    Trunk to Trunk.  ALPHAMERIC INPUT COUNTER DESCRIPTION 
    ALL 
    ATTTOATT 
    ATTTONPAT 
    Al-l-TO PAT 
    ATlTOTRK 
    N PATTOATT 
    NPAl-fONPAT 
    N PATTOPAT 
    NPAlTOTRK 
    PAl-TOAlT 
    PATTONPAT 
    PATTO PAT 
    PATTOTRK 
    TOTAL 
    TRKTOAlT 
    TRKTONPAT * 
    TRKTOPAT 
    TRKTOTRK 
    ALPHAMERIC INPUT Table 802.20 Health Care Usage Counters: HCU 
    COUNTER DESCRIPTION 
    ALL 
    ATTTOATT 
    Al-i-l-0 N PAT 
    Al-l-TO PAT 
    ATTTOTRK 
    NPATTOATT 
    NPAl-fONPAT 
    N PAT-TOPAT 
    NPATTOTRK 
    PATTOATT 
    PATTON PAT 
    PATTOPAT 
    PATTOTRK 
    TOTAL 
    TRKTOAn 
    TRKTONPAT 
    TRKTOPAT 
    TRKTOTRK All Health Care Usage Counters. 
    Attendant to Attendant. 
    Attendant to Nonpatient. 
    Attendant to Patient. 
    Attendant to Trunk. 
    Nonpatient to Attendant. 
    Nonpatient to Nonpatient. 
    Nonpatient to Patient. 
    Nonpatient to Trunk. 
    Patient to Attendant 
    Patient to Nonpatient. 
    Patient to Patient. 
    Patient to Trunk. 
    Total of all Health Care Usage Counters. 
    Trunk to Attendant. 
    Trunk to Nonpatient. 
    Trunk to Patient. 
    Trunk to Trunk. 
    I  
    						
    							.x-l, “I II” La ,7YI CMU Procedures 
    CUSTOMER MEMORY UPDATE PROCEDURE: TRAFCTR 
    TITLE: Traffic Metering Counter Assignments 
    Page 12 of 12 
    Table 802.21 Automatic Call Distribution Peg Counters: ACDP 
    ALPHAMERIC INPUT 
    NOTE: Two counters per system. COUNTER DESCRIPTION 
    ALL 
    QUEUE 
    ACCESS All ACD Peg Counters. 
    ACD Calls Queued. 
    ACD Grout Access. 
    MNEMONICS USED IN THIS CMU PROCEDURE: 
    Mnemonic 
    ACD 
    DCI 
    DiD 
    DISA 
    DTMF 
    LCR 
    LED 
    RLT 
    SMDR Definition 
    Automatic Call Distribution 
    Data Communications Interface 
    Direct Inward Dialing 
    Direct Inward System Access 
    Dual-Tone Multifrequency 
    Least Cost Routing 
    Light-Emitting Diode 
    Release Link Trunk 
    Station Message Detail Recording 
    ,_ ir  
    						
    							SATURN EPABX A30808-X5051-E120-3-8919 
    CMU Procedures Issue 5, May 1986 
    CUSTOMER MEMORY UPDATE PROCEDURE: TRKASSN 
    TITLE: Trunk Assignments 
    Access Level: 3, 4 pEz-/ 
    Page 1 of 6 
    I -/ 
    I STEP NO. PROMPT/EXPLANATION 
    I 
    ) DIS TRKASSN 
    PORT EQUIPMENT NUMBER (WXYZ) = nnnn 
    Requests PEN for which trunk assignment is to be displayed. 
    NOTE: See Table 101.1 for the PEN “YZ” fields for Tl trunks. nnnn ‘= valid PEN. 
    . ) ADD TRKASSN 
    I. PORT EQUIPMENT NUMBER (WXYZ) = nnnn 
    Requests PEN for which trunk assignment is to be added. nnnn = valid PEN. 
    NOTE: See Table 101.1 for the PEN “YZ” fields for Tl trunks. _. 
    I. TRUNK GROUP NUMBER (O-31) = nn 
    Requests trunk group number to which trunk is to be assigned. nn = trunk group number (O-31). 
    I. TENANT GROUP NUMBER (O-254) = nnn 
    Requests tenant group number to which trunk is being assigned. nnn = tenant group number (O-254). 
    Default is Tenant Group 0. 
    j. VFAC REQUIRED FOR INCOMING (Y/N) = a 
    Requests the user to specify if VFAC verification should be applied 
    to incoming calls on this trunk. a = Y = Yes; a = N = No. 
    If Y (Yes) - VFAC verification is applied. 
    If N (No) - No verification required. 
    5. VFAC REQUIRED FOR OUTGCING (Y/N) = a 
    Requests the user to specify if VFAC verification should be applied a = Y = Yes; a = N = No. 
    to outgoing calls on this trunk. 
    If Y (Yes) - VFAC verification is applied. 
    If N (No) - No verification required. 
    7. IS THIS A Tl TRUNK? (Y, N) = a 
    Requests whether trunk is used with Tl. a = Y = Yes; a = N = No. 
    If Y (Yes), go to step 8. 
    If N (No), go to step 10. 
    NOTE: Entering )CR> is the same as entering N for No. 
    8. 
    Tl SPAN NUMBER (1-15) = nn 
    Requests Tl span number,for trunk. nn = Tl span number (1-15). 
    NOTE: You can have a total of 2 Tl spans with SATURN II and 15 with SATURN III. 
    NOTE: Entering (CR) is the same as entering N for No.  
    						
    							SATURN EPABX 
    CMU Procedures ’ A30808-X5051-E120-3-B919 
    Issue 5, May 1986 
    I - 
    - 
    CUSTOMER MEMORY UPDATE PROCEDURE: TRKASSN 
    TITLE: Trunk Assignments Page 2 of 6 
    STEP NO. PROMPT/EXPLANATION 
    I. SPECIAL ACCESS SERVICE (Y, N) = 
    a 
    Requests whether or not a special access service is used. Verify a = Y = Yes; a = N = No. 
    with operating company the type of signaling used: either Foreign 
    Exchange (FX) or Special Access Office Channel Unit (SP). 
    If Y (Yes), a special access service is used. : 
    If N (No), no special access service is required. 
    NOTE: Entering (CR> is the same as entering N for No. 
    0. TRUNK TYPE = aaaaa 
    Requests trunk type of trunk be added. aaaaa = trunk type; see Table 101.2. 
    If DID, procedure is completed. If MSL, go to step 11. If RLT, go to 
    step 12. If GS, LS,NTT, or EM, go to step 13. 
    Il. ASSIGN MSL NUMBER (O-255) = nnn 
    Requests assignment of MSL number to this trunk. Go to step 16. nnn A* 
    MSL number (O-255). 
    12. OUTGOING OR INCOMING? (0,I) = a 
    Requests whether this RLT is an incoming or outgoing CAS trunk. a = 0 (Outgoing); or 
    If 0 (Outgoing), procedure is completed. If I (Incoming), go to step 16. a = I (Incoming). 
    NOTE: The RLT should be marked outgoing if used by this EPABX to reach the CAS attendant pool at the 
    CAS Main EPABX. The RLT should be marked incoming if this EPABX is the Main PABX serving 
    the centralized attendants. 
    13. ONE-WAY OUTGOING TRUNK? (Y,N) = a 
    Requests whether trunk is outgoing only, rather than two-way. a = Y = Yes; a = N = No. 
    If Y (Yes), procedure is completed. 
    If N (No), go to step 14. 
    NOTE: Entering (CR) is the same as entering N for NO. 
    14. IS THIS A DIT? (N/Y) = 
    a 
    Requests whether this is a Dedicated Incoming Trunk (DIT). a = Y = Yes; a = N = No. 
    If Y (Yes), go to step 15. If N (No), go to step 16. 
    NOTE: Enter “Y” only if the trunk group incoming usage is DIT. Entering (CR) is the same as entering N 
    for NO. 
    15. DIT EXTENSION NUMBER =- nnnn 
    Requests extension number of DIT. nnnn = extension number (O-9999). 
    16. NIGHT ANSWER TYPE 
    = aaaaa 
    Requests night answer type assigned to this trunk. If NONE, SNAP, aaaaa = night answer type; 
    or ZUNAl through ZUNM, procedure is completed. If ANA, go to see Table 101.3. 
    step 17. 
    17. ANA EXTENSION NUMBER 
    = nnnn 
    I 
    Requests extension number of ANA station. nnnn = extension number (O-9999). 
    NOTE: If the trunk group incoming usage is DIT, DPIGRP, or DPITRK, the night answer destination is used 
    only in a no answer recall situation, when all consoles are in the night mode.  
    						
    							SATURN EPABX 
    CMU Procedures A30808-X5051-E120-3-6919 
    Issue 5, May 1986 
    CUSTOMER MEMORY UPDATE PROCEDURE: TRKASSN 
    TITLE: Trunk Assignments Page 3 of 6 
    STEP NO. PROMPTlEXPLANATlON 
    1. )DELTRKASSN 
    2. PORT EQUIPMENT NUMBER (WXYZ) = nnnn 
    Requests PEN for which trunk assignment is 
    to be deleted. nnnn ,= valid PEN. 
    NOTES: 1. Trunk must be out of service before deleting. 
    2. See Table 101.1 for the PEN “YZ” fields for Tl trunks. 
    1 CHATRKASSN 
    !. PORT EQUIPMENT NUMBER lWXYi9 = nnnn 
    Requests PEN for which trunk assignment is to be changed. 
    NOTE: See Table 101.1 for the PEN ‘YZ” fields for Ti trunks. nnnn = valid PEN. 
    3. CHANGE VFAC REQUIREMENTS? (N/Y) = a 
    Requests whether VFAC requirements are to be changed. a = Y = Yes; a = N = No. 
    If YES, go to step 4. 
    If NO, go to step- 6. 
    I 
    1 
    1. VFAC REQUIRED INCOMING (NIY) = a 
    Allows the user to modify the VFAC requirement on incoming calls a = Y = Yes, a = N = No. 
    for this trunk. 
    5. If YES - VFAC verification is applied. 
    If NO - No verification required. 
    VFAC REQUIRED OUTGOING (N/Y) = a 
    I , 
    Allows the user to modify the VFAC requirement on outgoing Calls a = Y = Yes, a = N = No. 
    for this trunk. Procedure is completed.‘ - - 
    If YES - VFAC verification is applied. 
    If NO - No verification required. 
    6. CHANGE Ti SIGNALING MODE? (Y, N) = a 
    Requests whether Tl signaling mode assigned is to be changed. a = Y = Yes, a = N = No. 
    If Y (Yes), go to step 7. If N (No), go to step 9. 
    NOTE: Entering (CR) is the same as entering N for No. 
    I 
    I 
    7. SIGNALING MODE (NONE, A, AB, ABCD) = aaaa 
    Requests whether signaling mode is to be NONE, A, AB, or ABCD. aaaa = signaling mode 
    (NONE, A, AB, or ABCD). 
    8. DIAL PULSE BIT(S) (A, B, AB)? = aaaa 
    Requests whether dial pulse bits are to be A, B, AB, or NONE. 
    Procedure is completed. 
    Enter (CR) for none. 
    aaaa = dial pulse bits required 
    (A, B, AB, or NONE). 
    9. CHANGE MSL NUMBER? (N/Y) = a 
    Requests whether MSL number assignment is to be changed. a = Y = Yes, a = N = No. 
    If Y (Yes), go to step 10. If N (No), go to step 11. 
    Enter (CR> for no change.  
    						
    							. . . . . . ,.“... . . .._... __ _ . ._... ..~ ,.,. .,-, _W,.“.,“,^“. I - 
    SATURN EPABX 
    CMU Procedures A30808-X5051-E120-3-B919 
    Issue 5, May 1986 
    CUSTOMER MEMORY UPDATE PROCEDURE: TRKASSN 
    TITLE: Trunk Assignments 
    STEP NO. 
    PROMPT/EXPLANATION Page 4 
    of 6 
    IO. MSL NUMBER (O-255) = nnn 
    Requests assignment of MSL number to this trunk. Procedure is nnn = MSL number (O-255). 
    completed. 
    Il. CHANGE DIT EXTENSION NUM? (NN) = 
    a : 
    I 
    Requests whether DIT assignment is to be changed. a = Y = Yes; a = N = No. 
    If Y (Yes), go to step 12. If N (No), go to step 13. 
    Enter (CR) for no change. 
    12. DIT 
    EXTENSION NUMBER = nnnn 
    Requests DIT extension number to which trunk is to be assigned. nnnn = extension number (O-9999). 
    Procedure is completed. 
    ” *- 
    13. 
    CHANGE NIGHT ANSWER TYPE? (N/Y) = a 
    Requests whether night answer type for trunk is to be changed. a = Y = Yes; a = N = No. 
    If Y (Yes), go to step 11. If N (No), procedure is completed. 
    Enter (CR) for no change. 
    14. NIGHT ANSWER TYPE = aaaaa 
    Requests night answer type to be assigned to this trunk. If ANA, aaaaa = night answer type; 
    go to step 15. If NONE, SNAP, or ZUNAl through ZUNA4, proce- see Table 101.3. 
    dure is completed. 
    15. ANA EXTENSION NUMBER 
    = nnnn 
    Requests ANA extension number which this trunk is assigned. nnnn = extension number (O-9999). 
    Procedure is completed.  
    						
    							I - 
    SATURN EPABX A30808-X5051-E120-3-8919 
    CMU Procedures Issue 5, May 1986 
    CUSTOMER MEMORY 
    UPDATE PROCEDURE: TRKASSN TITLE: Trunk Assignments Page 5 of 6 
    Table 101.1 “Y 2” Fields of PEN-for Tl Spans 
    ALPHAMERIC 
    INPUT 
    DID 
    s 
    LS 
    MSL 
    RLT 
    Tl 
    N-IT 
    TBLLC 
    TMBC 
    TMBE 
    Table 101.2 Trunk Vpes 
    DESCRIPTION 
    Direct Inward Dial 
    E&M 
    Ground Start 
    Loop Start 
    Main-Satellite Link (for MS applications) 
    Release Link Trunk (for CAS applications) 
    Tl Line 
    I NOT APPLICABLE TO DOMESTIC (U.S.) SYSTEMS  
    						
    All Siemens manuals Comments (0)

    Related Manuals for Siemens Saturn Epabx Oc1e Dyad Digital Telephone User Instructions