Siemens Saturn Epabx Oc1e Dyad Digital Telephone User Instructions

							SATURN EPABX 
Attendant Console General Description and Operating Instructions A30808-X5051-CllO-l-B919 
Issue 1, December 1984 
18B ACCESSING CUSTOMER-PROVIDED DICTATION 
EQUIPMENT 
(SOURCE PARTY PRESENT): 
(1) 
CONPl%ATION (3) 
DIAL DICTATION ACCESS CODE 
DURING DESTINATION SELECTION ) m I,,,[ ) TONE IS HEARD ) A+!i%EY ) m 
I 
X!X/XIXlXiX/ /D/IiC/T/AIT/ I/OiNl /nininlni / ! 1 1 / 1’ 
I I 
SOURCE DESTINATION 
0 
0 - (access code) 
NOTES: (1) Number displayed when dialed. 
(2) 
If Busy Tone is heard and the Call Information Display prompts “DICTATION 
-. BUSY” instead, retry later since dictation facility is presently busy. Also, the dial 
dictation access code is cleared from the Call Information Display. 
(3) 
Depressing a flashing INC, OPR, RC-L or ANS key performs the same function 
in addition to connecting the next call for processing. 
Attendant is not permitted to unsplit a connection to the dictation equipment when 
a split party exists. 
4-66  
						

							SATURN EPABX 
Attendant Console General Description and Operating Instructions 
19A ENABLING ‘LCR’ FEATURE 
PARTICULAR SPECIALIZED 
A30808-X5051-CliO-l-B919 
Issue 1, December 1984 
ACCESS TO A 
COMMON CARRIER 
(SCC): 
DIAL ‘SCC’ ENABLE ACCESS DIAL THE ONE-DIGIT ‘SCC’ NUMBER (2) CODE WHEN CONSOLE (I.E.; 0, 1 OR 2) BEING ASSIGNED CONFIRMATION 
IS IDLE WITH ‘LCR’ FEATURE TONE IS HEARD 
I (3) 
SOURCE DESTINATION 
0 
0 
NOTES: (1) Number displayed when dialed. 
(2) If intercept tone is heard and “INVALID SCC NUMBER” is displayed instead, it indicates an invalid 
or unassigned SCC number was dialed; check for accuracy and reattempt procedure. 
(3) Question mark is overwritten when the SCC number is dialed. 
Attendant can exit from this procedure at any time by depressing either the RLS or ATT RLS key, 
or a flashing INC, OPR, RCL or ANS key which causes the SRC key to be extinguished and the 
Call Information Display to restore idle state display. 
19B DISABLING ‘LCR’ FEATURE ACCESS TO A 
SPECIALIZED COMMON CARRIER (see): 
(1) 
(1) DIAL ‘SCC’ DISABLE ACCESS DIAL THE ONE-DIGIT ‘SCC’ NUMBER (2) CODE WHEN CONSOLE (I.E.; 0, 1 OR 2) BEING DISABLED 
b CONFIRMATION 
IS IDLE FROM ‘LCR’ FEATURE TONE IS HEARD 
I I 
I 
SOURCE 
0 DESTINATION 
0 
NOTES: (1) Number displayed when dialed. 
(2) If intercept tone is heard and “INVALID SCC NUMBER” is displayed instead, it indicates an invalid 
or unassigned SCC number was dialed; check for accuracy and reattempt procedure. 
(3) Question mark is overwritten when the SCC number is dialed. 
Attendant can exit from this procedure at any time by depressing either the RLS or ATT RLS key, 
or a flashing INC, OPR, RCL or ANS key which causes the SRC key to be extinguished and the 
Call Information Display to restore idle state display. 
4-67  
						

							SATURN EPABX A30808-X5051-CliO-l-B919 
Attendant Console General Description and Operating Instructions issue 1, December 1984 
2OAl ACTIVATING MESSAGE WAITING LAMP FEATURE 
WITHOUT BEING CONNECTED TO STATION: 
DIAL MESSAGE WAITING 
(1) 
ACTIVATION ACCESS CODE or DEPRESSS MSG SET KEY 
WHEN CONSOLE IS IDLE WHEN CONSOLE IS IDLE ) m I[ ) ST%%:fi;R 
SOURCE DESTINATION 
0 @ 
NOTES: (1) Optional key. 
(2) If intercept tone is heard instead, and the display shows ‘NOT EQUIPPED’, the 
dialed station is not equipped with the Message Waiting Lamp feature. If reorder 
tone is heard instead, and the display shows ‘NO SPACE’, it indicates there is 
no space in the message waiting buffer; retry later. 
(3) Depressing at any time either the RLS or ATT RLS key, or a flashing INC, OPR, 
RCL or ANS key allows the attendant to exit from this function. 
(4) The question mark is overwritten when the station number is dialed. 
‘: 
i 
4-68  
						

							SATURN EPABX A30808-X5051-CllO-l-6919 
Attendant Console General Description and Operating Instructions Issue 1, December 1984 
20A2 CANCELLING MESSAGE WAITING LAMP FEATURE 
WITHOUT BEING CONNECTED TO STATION: 
DIAL MESSAGE WAITING 
(1) 
DEACTIVATION ACCESS CODE or DEPRESSS MSG CANCEL KEY 
WHEN CONSOLE IS IDLE WHEN CONSOLE IS IDLE 
SOURCE 
(g DESTINATION 
0 
NOTES: (1) Optional key. 
(2) If intercept tone is heard instead, and display shows ‘NOT EQUIPPED’, the di- 
aled station is not equipped with the Message Waiting Lamp feature. 
(3) Depressing at any time either the RLS or ATT RLS key, or a flashing INC, OPR, 
RCL or ANS key allows the attendant to exit from this function. 
(4) The question mark is overwritten when the station number is dialed. 
4-69  
						

							SATURN EPABX A30808-X5051-CllO-l-B919 
Attendant Console General Description and Operating Instructions 
issue 1, December 1984 
20Bl ACTIVATING MESSAGE WAITING LAMP FEATURE 
WHILE RINGING A STATION: 
(1) DIAL MESSAGE WAITING 
DEPRESS (2) 
ACTIVATION ACCESS CODE Or (3) 
MSG SET 
KEY 
(USING THE PROCEDURE 
. 
M/S!4 lb4 I In/M j I I ! j 1 I j I I I I / I I ! / i / I / I j ! I I j ’ 
SOURCE 
@ DESTINATION 
Q 
NOTES: (1) Optional key. 
(2) MSG SET key is steadily lit for only 1% seconds. 
(3) If a timed NAK tone is heard, it indicates the dialed station is not equipped with 
the Message Waiting Lamp feature. If reorder tone is heard instead, it indicates 
there is no space in the message waiting buffer; retry later. After any tone is heard, 
the attendant is automatically reconnected to source party and Call Information 
Display prompts source party information. 
Activation of this feature can be performed while connected to station in either 
a busy, ringing or talking state. 
4-70  
						

							SATURN EPABX A30808-X5051-CllO-l-B919 
Attendant Console General Description and Operating Instructions Issue 1, December 1984 
20B2 CANCELLING MESSAGE WAITING LAMP FEATURE 
WHILE CONNECTED TO STATION: 
(USING PROCEDURE 
DIAGRAMS, PERFORM THE 
APPLICABLE PROCEDURE) 
DESTINATION 
@ 
NOTES: (1) Optional key. 
(2) MSG CANCEL key is steadily lit for only lV2 seconds. 
(3) If a timed NAK tone is heard, it indicates the dialed station is not equipped with 
the Message Waiting Lamp feature. After either tone is heard, the attendant is 
automatically reconnected to source party and Call Information Display prompts 
source party information. 
Cancellation of this feature can be performed while connected to station in either 
a busy, ringing or talking state. 
4-71  
						

							SATURN EPABX 
A30808-X5051-CllO-l-6919 
Attendant Console General Description and Operating Instructions 
Issue 1, December 1984 
21A PLACING CONSOLE IN THE “UNSTAFFED” MODE 
1 
OF OPERATION: 
(1) UNPLUG HANDSET OR 
REMAINING CONSOLE DISPLAY INDICATORS 
HEADSET ASSEMBLY ) I=-1 ARE EXTINGUISHED AFTER 10 SECONDS 
NOTES: (1) The stated “10 seconds” is a typical time parameter; such time parameter is 
customer-set via CMU procedures. 
When the console is in the “unstaffed” mode of operation, no incoming calls are 
routed to console and no calls or special functions can be performed (e.g.; con- 
sole is completely inoperative). 
21B RESTORING CONSOLE TO NORMAL OPERATION 
FROM “UNSTAFFED” MODE: 
CONSOLE DISPLAY INDICATORS ARE EITHER FLASHING, 
PLUG IN HANDSET OR 
STEADILY LIT OR EXTINGUISHED, CALL INFORMATION 
HEADSET ASSEMBLY ) INIG”rl DISPLAY PROMPTS THE IDLE STATE DISPLAY. 
4-72  
						

							SATURN EPABX 
1 Attendant Console General Description and Operating Instructions 
22A ACTIVATING ‘SMDR’ FEATURE FOR A 
PARTICULAR TRUNK GROUP: 
A30808-X5051-CllO-l-B919 
Issue 1, December 1984 
(1) (2) DIAL THE TWO-DIGIT TRUNK GROUP 
NUMBER (I.E.; 00 to 31) BEING 
ASSIGNED WITH ‘SMDR‘ FEATURE 
(4) 
DEPRESS 
RLS KEY Or A:;;:& b II 
SOURCE 
0 DESTINATION 
0 
NOTES: (1) Number displayed when dialed. 
(2) If the dialed trunk group number is valid, the ‘SMDR’ feature is immediately acti- 
vated for incoming, outgoing or all calls according to the trunk group’s static data 
base assignment after confirmation tone is heard. 
(3) If intercept tone is heard instead, it indicates the dialed trunk group number is 
invalid; check for accuracy and retry procedure. 
(4) Depressing a flashing INC, OPR, RCL or ANS key performs the same function 
in addition to connecting the next call for processing. 
4-73  
						

							SATURN EPABX 
A30808-X5051-CllO-l-B919 
Attendant Console General Description and Operating Instructions 
Issue 1, December 1984 
226 CANCELLING ‘SMDR’ FEATURE FOR A 
PARTICULAR TRUNK GROUP: 
(6 
(1) DIAL THE TWO-DIGIT TRUNK GROUP 
DIAL ‘SMDR’ CANCEL CODE 
NUMBER (I.E.; 00 to 31) BEING 
WHEN CONSOLE IS IDLE ) l=l) 
CANCELLED FROM ‘SMDR‘ FEATURE 
(2) (3) 
’ b CONFIRMATION DEPRESS 
TONE IS HEARD ) RLS KEY Or AF;;;;;y ) I- 
I 
lD!E!-/AiCiTI liVIA/T(EI lSlM/DiRI !FlOiR/ /TiRiU/N!K/ iGlRiO/U/P!=! / Iad j j 1’ 
SOURCE 
(TJ 
NOTES: (1) Number displayed when dialed. 
(2) If intercept tone is heard instead, it indicates the dialed trunk group number is 
invalid; check for accuracy and retry procedure. 
(3) Depressing a flashing INC, OPR, RCL or ANS key performs the same function 
in addition to connecting the next call for processing. 
4-74  
						

							SATURN EPABX A30808-X5051-CllO-1-6919 
Attendant Console General Description and Operating Instructions issue 1, December 1984 
23A DISPLAYING CURRENT STANDARD (OR DEFAULT) 
‘SMDR’ ACCOUNT CODE ASSOCIATED WITH A 
PARTICULAR INCOMING OR .OUTGOlNG TRUNK 
CALL: 
DEPRESS APPROPRIATE CONSOLE KEY 
TO CONTINUE NORMAL PROCESSING OF 
) CALL AND APPLY THE DISPLAYED ‘SMDR’ ) II 
ACCOUNT CODE NUMBER TO CALL 
(2) I 
I I 
I 
AiC/C/Ti iNi / lnlninln/nlnlnjn/n~n/nl 1 / / / / 1 I / i I / / 1 1 / 1 I j j 
SOURCE 
0 
DESTINATION 
@ 
I- (Initial display of incoming/outgoing trunk information) 
NOTES: (1) Optional key; also, if Intercept Tone is heard after depressing ACCT key, it indicates 
connected call has no associated ‘SMDR’ Account. 
‘SMDR’ Account Codes are customer-defined via CMU Procedures. 
(2) ‘SMDR’ Account Code may not yet be associated with call, in which case the 
numerical digits are not prompted. 
The ‘SMDR’ Account Code overlays the source field. 
4-75