Siemens Saturn Epabx Oc1e Dyad Digital Telephone User Instructions

							SATURN EPABX A30808-X5051-CllO-l-B919 
Attendant Console General Description and Operating Instructions Issue 1, December 1984 
13D2 CALLING A PUBLIC NETWORK NUMBER 
WITH ‘LCR’ 
(OUTGOING TRUNK GROUP WITH ‘LCR’ BUSY - 
CALLBACK QUEUING DESIRED): 
(1) DIAL LEAST COST IF ‘SMDR’ ACCOUNT CODE IS REQUIRED 
;g;T:~$gyg;g~:; b pq b (1) 
(1) 
DIAL PUBLIC 
b RECALL DIAL ) DIAL REQUIRED DIGITS 
IS IDLE NETWORK NUMBER 
TONE HEARD OF ‘SMDR’ SPECIAL 
ACCOUNTCODE 
(2) CONFIRMATION TONE 
IS HEARD ) TON!%ARD ) TONE’%ARD ) T%F% ) I[ 
‘1 I 1 1 / lR~olU/T/4=jnln IQ~UIEIU/4D/ 1 I / 1 / I I I I I / I I I I ! / 1 I 1 I 
SOURCE 
0 
DESTINATION 
8 
NOTES: (1) Number displayed when dialed. 
(2) If busy tone continues and “Q-FULL” is displayed instead, retry later since all 
facilities are presently busy. 
4-56  
						

							SATURN EPABX A30808-X5051-CliO-l-6919 
Attendant Console General Description and Operating Instructions issue 1, December 1984 
13D3 CALLING A PUBLIC NETWORK NUMBER 
WITH ‘LCR’ 
(OUTGOING TRUNK GROUP WITH ‘LCR’ BUSY - STANDBY 
QUEUING DESIRED): 
DIAL LEAST COST 
ROUTING (LCR) ACCESS 
CODE WHEN CONSOLE ) 
IS IDLE IF ‘SMDR’ ACCOUNT CODE IS REQUIRED : 
(1) 
(1) 
DIAL PUBLIC 
NETWORK NUMBER ) RECALL DIAL ) DIAL REQUIRED DIGITS 
TONE HEARD OF ‘SMDR’ SPECIAL 1 
: ; 
I ACCOUNT CODE ~ ~ 
(2) SILENCE OR REMAIN OFF-HOOK 
..- ) CONFIRMATION TONE BUSY 
LOW 
IS HEARD ) TONE HEARD ) TONE HEARD ) MUSIC IS UNTIL RINGBACK 
HEARD b 
TONE IS HEARD 
I 
! 1 / / /R!O~U/T/E~=Inln IQ~u!E/uIE~D~ j j / / / j / / ! / j / / / / i / i j ’ 
NOTES: (1) Number displayed when dialed. 
(2) If busy tone continues and “Q-FULL” is displayed instead, retry later since all 
facilities are presently busy. 
4-57  
						

							SATURN EPABX 
Attendant Console General Description and Operating Instructions A30808-X5051-CllO-l-8919 
Issue 1, December 1984 
9 
14A ACTIVATING ATTENDANT CONTROL OF FACILITY ,’ 
(ACOF) FEATURE: 
REFERENCE 
ONLY 
I 
ACOF 
KEY NO. 
ACOF( ) 
ACOF( ) 
ACOF( ) 
ACOF( ) 
ACOF( ) 
ACOF( ) 
- 
ACOF( ) 
ACOF( ) 
(1) 
b DEPRESS DESIRED ACOF KEY 
WHEN CONSOLE IS IDLE b 
CONTROLLED-FACILITY ACOF 
KEY NO. 
ACOF( ) 
ACOF( ) 
ACOF( ) 
ACOF( ) 
ACOF( ) 
ACOF( ) 
ACOF( ) 
ACOF( ) 
ACOF( ) CONTROLLED FACILITY 
NOTES: (1) Optional key. 
When activating and deactivating the ACOF feature, the Call Information Display 
remains in the idle state display. 
14B DE-ACTIVATING ATTENDANT CONTROL OF 
FACILITY (ACOF) FEATURE: 
REFERENCE 
ONLY -- 
(1) 
b DEPRESS DESIRED ACOF KEY 
WHEN CONSOLE IS IDLE 
. 
4-58  
						

							SATURN EPABX 
A30808-X5051-CllO-l-8919 
Attendant Console General Description and Operating Instructions 
Issue 1, December 1984 
14c ACTIVATING ATTENDANT CONTROL OF FACILITY 
FOR TRUNK GROUPS (ACOF-TG) FEATURE: 
REFERENCE 
ONLY 
(1) 
ACOF-TG 
KEY NO. 
ACOF-TG( ) 
ACOF-TG( ) 
ACOF-TG( ) 
ACOF-TG( ) 
ACOF-TG( ) 
ACOF-TG( ) 
ACOF-TG( ) 
ACOF-TG( ) 
ACOF-TG( ) CONTROLLED-TRUNK 
GROUP ACOF-TG 
KEY NO. CONTROLLEDTRUNK 
GROUP 
ACOF-TG( ) 
ACOF-TG( ) 
ACOF-TG( ) 
ACOF-TG( ) 
.~ 
ACOF-TG( ) 
ACOF-TG( ) 
ACOF-TG( ) 
ACOF-TG( ) 
ACOF-TGI ) 
NOTES: (1) Optional key. 
When activating and deactivating the ACOF-TG feature, the Call Information Dis- 
play remains in the idle state display. 
14D IE-ACTIVATING ATTENDANT CONTROL OF FACILITY 
‘OR TRUNK GROUPS (ACOF-TG) FEATURE: 
REFERENCE 
ONLY 
4-59  
						

							SATURN EPABX 
Attendant Console General Description and Operating Instructions A30808-X5051-CllO-l-B919 
Issue 1, December 1984 
15A ACTIVATING CALL FORWARDING FEATURE FOR A 
PARTICULAR STATION: 
(1) (iI (3) 
DIAL CALL FORWARDING DIAL STATION NUMBER DIAL STATION NUMBER CONFIRMATION 
ACTIVATION ACCESS CODE ) TO BE FORWARDED FROM ) TO BE FORWARDED TO ) TONE HEARD 
DESTINATION 
Q 
NOTES: (1) Attendant cannot call forward to public network. 
(2) Dial ‘0’ required to forward calls to console. 
(3) Not required for Secretarial Call Forwarding. 
(4) Station numbers overwrite question marks. 
Activation of call forwarding feature depends on the station’s call forwarding 
class-mark. 
If attendant makes an error in dialing the access code or selects an unassigned 
or invalid station number, reorder tone will be heard and attendant must depress 
the RLS key and attempt the procedure again. 
If the attendant successfully completes the call forwarding procedure for a sta- 
tion already in call forwarding mode, the original call forwarding is cancelled and 
the new call forwarding takes effect. 
4-60  
						

							SATURN EPABX A30808-X5051-CllO-l-B919 
Attendant Console General Description and Operating Instructions Issue 1, December 1984 
156 CANCELLING CALL FORWARDING FEATURE 
FOR A PARTICULAR STATION: 
DEPRESS DIAL CALL FORWARDlNG DIAL STATION NUMBER CALL 
SRC KEY ) E[) DEACTIVATION ACCESS CODE ) FORWARDING IS TO BE CANCELLED j 
I I 
I 
CONFIRMATION 
) TONE HEARD ) KY% ) I[ 
(1) 
t 1 
Ic(AIN~CIE/LI 
!CiFiW(D/ 
!FIRiCiM/ 
(?ld@d 
1 1 1 1 
( 
1 1 1 1 
1 / 
1 / ( 
( 1 1 1 
SOURCE 
0 
DESTINATION 
0 
NOTES: (1) Station number overwrites question mark. 
Deactivation of call forwarding feature depends on the station’s call forwarding 
class-mark. 
If attendant makes an error in dialing the access code or selects an unassigned 
or invalid number, reorder tone is heard and attendant must depress RLS key 
and attempt the procedure again. 
If attendant successfully completes the call forwarding deactivation procedure 
for a station already in call forwarding mode, the original call forwarding is can- 
celled. 
4-61  
						

							. 
SATURN EPABX 
Attendant Console General Description and Operating Instructions 
16 ACCESSING CUSTOMER-PROVIDED 
PAGING EQUIPMENT: 
A30808-X5051-CllO-l-B919 
issue 1, December 1984 
.;., 
,i 
DIAL DESIRED PAGING ACTIVATION 
ACCESS CODE WHEN CONSOLE IS IDLE 
Or 
PAGE 
KEY ID. 
PAGE( ) 
PAGE( ) 
PAGE( ) 
PAGE( ) ZONE(S) 
MAKE PAGING 
CONFIRMATION ANNOUNCEMENT 
b 
TONE IS HEARD ) THROUGH TRANSMITTER 
IMOUTHPIECE) OF THE 
’ HEADSET/HANDSET 
. 
P/AiGiE! /Z~O~N/E~S/ /11213141 /n/nln(n / / I / ( 1 I 
1 / 1 1 1 1 / / j / 1 I 
I I I 
SOURCE DESTINATION 
0 - 
ACCESS CODE @ 
L (As applicable) 
NOTES: (1) Optional key, 
(2) If Busy Tone is heard and Call Information Display prompts “PAGE BUSY” in- 
stead; retry later since paging facilities are presently busy. 
(3) Depressing a flashing INC, OPR, RCL or ANS key performs the same function 
in addition to connecting the next call for processing. 
If a source party is present and paging is desired, attendant must first place the 
source party on hold (via LOOP key) and proceed with procedure. 
4-62  
						

							SATURN EPABX 
A30808-X5051-CllO-l-6919 
Attendant Console General Description and Operating Instructions 
issue 1, December 1984 
17A ACCE§SING CUSTOMER-PROVIDED CODE CALLING 
EQUIPMENT 
(SOURCE PARTY PRESENT): 
(2) (3) 
(1) RINGBACK TONE DIAL THE APPROPRIATE 
DIAL CODE CALLING ACCESS CODE 
DURING DESTINATION SELECTION ) m m ) ls::~A%:EBy ) “?%;“G”C”o”dE”lT / 
I I 
I 
(4) 
DEPRESS ATT RLS KEY WHEN 
b CODE CALLED PARTY DIALS 
THE ANSWERBACK CODE 
SOURCE DESTINATION 
0 
0 
NOTES: (1) Access code is displayed when dialed. 
(2) The access code is cleared from the Call Information Display at this time. If Busy 
Tone is heard and the Call Information Display prompts “CODE CALL BUSY” 
instead, retry later since the code calling facility is presently being used. 
(3) The one-to-four digit calling code is customer-defined via CMU procedures. Also, 
the ATT RLS key may be depressed at this time to allow the source party to dial 
the calling code. If the Call Information Display prompts “NO RCVR: RETRY” 
when the ATT RLS key is depressed, this indicates there is no DTMF receiver 
available and attendant must dial the calling code before extending the code call- 
ing facility to the source party.’ 
(4) The destination information changes to display the identity of the answering party 
when the code called party dials the Answerback Code. Also, depressing a flash- 
ing INC, OPR, RCL, or ANS key performs the same function in addition to con- 
necting the next call for processing. 
4-63  
						

							SATURN EPABX A30808-X5051-CllO-l-B919 
Attendant Console General Description and Operating Instructions Issue 1, December 1984 
17B ACCESSING CUSTOMER-PROVIDED CODE CALLING 
EQUIPMENT 
(SOURCE PARTY NOT PRESENT): 
(2) (3) 111 RINGBACK TONE DIAL THE APPROPRIATE 
(4) 
TALK TO CODE CALLED 
b PARTY WHEN SUCH DIALS 
b DEPRESS 
THE ANSWERBACK CODE RLS KEY 
DESTINATION 
(ZJ 
NOTES: (1) Access code is displayed when dialed. 
(2) The access code is cleared from the Call Information Display at this time. If Busy 
Tone is heard and the Call Information Display prompts “CODE CALL BUSY” 
instead, retry later since the code calling facility is presently being used. 
(3) The one-to-four digit calling code is customer-defined via CMU procedures. 
(4) Attendant indentifies when the code called party dials the Answerback Code when 
the Call Information Display changes the displayed source information with the 
information on the answering party. 
4-64  
						

							SATURN EPABX 
Attendant Console General Description and Operating Instructions A30808-X5051-CllO-l-6919 
Issue 1, December 1984 
18A ACCESSING CUSTOMER-PROVIDED DICTATION 
EQUIPMENT 
(SOURCE PARTY NOT PRESENT): 
I 
(~id~l+/~/I/O14 !nlnlnln/ I I I I I I i i I I i i I ! ! / I / I / I / I 1 I 1’ 
I 
I 
SOURCE 
DESTINATION 
0 
0 
I 
- (access code) 
NOTES: (1) Number displayed when dialed. 
(2) If Busy Tone is heard and the Call Information Display prompts “DICTATION 
BUSY” instead; retry later since dictation facility is presently busy. Also the dial 
dictation access code is cleared from the Call Information Display. 
(3) The last control digit dialed is displayed in the Call Information Display. 
4-65