Siemens Saturn Epabx Oc1e Dyad Digital Telephone User Instructions

							I- 
- 
SATURN EPABX A30808X5051-E1204-6919 
CMU Procedures Issue 6, November 1985 
CUSTOMER MEMORY UPDATE PROCEDURE: SPCLEQPT 
TITLE: Special Equipment Assignments 
STEP NO. PROMPT/EXPLANATION Page 2 of 6 
7. INTERFACE TYPE (SLMA,SLAlG) = aaaaa 
Requests type of line interface. Procedure is complete. aaaa = SLMA = Subscriber line module 
analog; 
aaaaa = SW16 = Subscriber line module 
: 
analog - 16 line. 
(. j 
8. RECORDED ANNOUNCER SERVICE MODE = aaaaaaa 
L I Requests recorded announcement to be assigned to ACD service. aaaaaaa = INTCPT ACDl, ACD2, or 
ACDNITE. 
9. RECORDED ANNOUNCEMENT PEN fWX’fZI = nnnn 
Requests PEN to be assigned to the recorded announcement trunk nnnn = valid PEN. 
for the intercept or ACD recorded announcement feature. 
. . .. 
0. PLAY MODE (CONTSTARTDEMAND) = aaaaaa 
Requests play mode to be assigned to the recorded announcement aaaaaa = play mode: CONT, START, or 
equipment. If DEMAND, go to step 10; if CONT or START, go to step 11. DEMAND. 
1. INTERFACE TYPE (EM,SLMA,StAl6) = aaaaa 
Requests type of line/trunk interface assigned to the recorded an- aa = EM = E&M trunk; 
nouncement equipment when used on a demand basis. aaaa = SLMA = subscriber line module 
analog; 
aaaaa = SLA16 = Subscriber line module 
analog - 16 line. 
i2. MESSAGE LENGTH IN SECONDS = nn I 
Requests message length to be assigned to recorded announcement. 
Procedure is completed. nn = message length (l-60) seconds. 
NOTE: Enter one second longer than the message length associated with selected recorder announcement serv- 
ice mode (INTCPT, ACDl, ACDP, or ACDNITE). 
13. PAGING ZONE NUMBER (14) = 
n 
Requests zone number to be assigned to paging equipment. n = paging zone number (14). 
14. PAGING ZONE PEN (WXYZ) = nnnn 
Requests PEN to be assigned to the paging equipment trunk for pag- nnnn = valid PEN. 
ing zone “r-r:’ 
15. 
GIVE BACKGROUND MUSIC ON IDLE? = a .+ 
Requests music to be provided when paging equipment is idle. Proce a=Y = Yes; a = N = No. 
dure is completed. 
16. DICTATION PEN (WXYZ) = nnnn 
Requests PEN to be assigned to the dictation equipment trunk. nnnn = valid PEN. 
NOTE: The system will allow a maximum of four dictation machines.  
						

							SATURN EPABX A30808-X5051-El2048919 
CMU Procedures Issue 6, November 1985 
CUSTOMER MEMORY UPDATE PROCEDURE: SPCLEQPT 
TITLE: Special Equipment Assignments 
Page 3 of 6 
STEP NO. PROMPT/EXPLANATION 
7. INTERFACE TYPE (SLMASLA16) = aaaaa 
Requests type of line interface. Procedure is completed. aaaa = SLMA = Subscriber line module 
analog; 
aaaaa = SLA16 = Subscriber line module 
analog - 16 line. 
a CODE CALL PEN (WXYZ) = nnnn 
I 
Requests PEN to be assigned to the code calling equipmenTb$r,nk. nnnn c valid PEN. 
9. ADDRESSS SIGNALING (DRDTMF) = aaaa 
Requests address signaling type that applies for access to the code aaaa = DP = Dial Pulse; 
calling equipment. aaaa = MMF = Dual-Tone Multifrequency. 
NOTE: If Code Calling equipment is to be accessed from remote SATURN PABXs in a Main-Satellite network, the 
signaling type must be MMF. 
20. CODE CALL DIGIT COUNT (14) = n 
Requests number of digits that can be sent to the codecalling equip n P number of digits (14). 
ment. Procedure is completed. 
21. TRANSCEIVER DC1 PEN (WXYZ) = nnnn 
Requests PEN of DCI to be used for the Data Test Transceiver. nnnn = valid PEN. 
NOTE: The DCI must first be assigned in the DATAASSN procedure. 
22. IO CHANNEL (lTY, TWO, lW1) = aaan 
Requests the IO output port to be used for the Data Test Transceiver. aaan = lTf, llY0, or TTyl. 
Procedure is completed. 
NOTEz The IO port selected cannot be used for any other function unless or until the data test transceiver iS 
deleted via the DEL SPCLEQPT action/command. 
23 VOICE MAIL PEN (WXYZ) = nnnn 
Requests PEN to be assigned to voice mail interface. nnnn P valid PEN. 
24. VOICE MAIL EXTENSION NUMBER = nnnn 
I 
Requests voice mail extension number. nnnn = extension number. 
25. CLASS OF SERVICE NUMBER (O-31) = nn 
Requests class of service number for voice mail. nn = class of service number (O-31). 
26 INTERFACE TYPE (SLMA,SLAlG) = aaaaa 
1 
Requests type of line interface. Procedure is completed. 
aaaa = SLMA = Subscriber line module 
analog; 
aaaaa = WA16 = Subscriber line module 
analog - 16 line.  
						

							SATURN EPABX A30808-X5051-E120-4-8919 
CMU Procedures Issue 6. November 1985 
CUSTOMER MEMORY UPDATE PROCEDURE: SPCLEQPT 
TITLE: Special Equipment Assignments 
STEP NO. PROMPT/EXPLANATION 
Page 4 of 6 
I. ) DEL SPCLEQPT 
!. 
EQUIPMENT TYPE = aaaaaaaaa 
Requests type of special equipment that is to be unassigned. If aaaaaaaaa =.. equipment type; MUSIC, ZUNA, go to step 3; if RECANN, go to step 4; if PAGE, go to step ZUNA,’ RECANN, PAGE, DICT, CODE, 
5; if DICT, go to step 6; if VOICEMAIL, go to step 7; for others, proce- XCVRTEST, or VOICEMAIL. 
dure is completed. 
3. UNA ZONE NUMBER (l-4) = 
n 
Requests UNA zone number to be deleted. Procedure is completed. n = UNA zone numbers (l-4). 
4. RECORDER ANNOUNCER SERVICE MODE 
= aaaaaaa 
Requests recorded announcement to be deleted. Procedure is com- aaaaaaa = INTCPT, ACDl, ACD2, or 
pleted. ACDNITE. 
5. PAGING ZONE NUMBER (14) = 
n 
Requests paging zone number to be deleted. Procedure is com- n = paging zoning numbers (l-4). 
pleted. 
6. DICTATION PEN 
(WXYZ) = nnnn 
Requests PEN of Dictation Equipment to be deleted. Procedure is nnnn = valid PEN. 
completed. 
7. 
VOICE MAIL PEN (WXYZ) = nnnn 
Requests voice mail PEN to be deleted. Procedure is completed. nnnn = valid PEN. 
1. 
> CHA SPCLEQPT 
2. EQUIPMENT TYPE = aaaaaaaaa 
Requests type of recorded announcement equipment for which data aaaaaaaaa = equipment type; RECANN, 
are to be changed. If RECANN, go to step 3; if DICT, go to step DICT, CODE, PAGE, or VOICEMAIL. 
6; if CODE, go to step 7; if PAGE, go to step 9; and if VOICEMAIL, 
go to step 11. 
NOTE: Refer to Table 509.1 for required interface. 
3. ANNOUNCER SERVICE TO BE CHANGED = aaaaaaa 
Requests announcer service to be changed. aaaaaaa = INTCPT, ACDl, ACD2, or 
ACDNITE. 
4. NEW PLAY MODE (CONT,START,DEMAND) = aaaaaa 
Requests new play mode to be assigned to the recorded announce- aaaaaa = play mode; CONT, START, or ment equipment. Enter (CR) for no change. DEMAND. 
r 
I 
5. NEW MESSAGE LENGTH IN SECONDS = nn 
Requests new message length. Procedure is completed. nn = message length (l-60) seconds.  
						

							SATURN EPABX 
CMU Procedures A3O808-X5051-E1204B919 
issue 6, November 1985 
CUSTOMER MEMORY UPDATE PROCEDURE: SPCLEQPT 
TITLE: Special Equipment Assignments 
Page 5 of 6 
STEP NO. PROMPT/EXPLANATION 
i DICTATION DISCONNECT DIGIT (O-9) = n 
Requests digit to be recognized as disconnect signal for the dictation n = disconnect digit (O-9). 
equipment. Enter (CR) for no change. Procedure is completed. 
NOTE: The disconnect digit is only administered on “CHANGE” because it is a system-wide function. 
T ADDRESS SIGNALING (DRDTMF) = aaaa 
1 
Requests address signaling type that applies ffor access to the code- aaaa = DP = Dial Pulse; 
calling equipment. Enter (CR> for no change. aaaa = DTMF = Dual-Tone Multifrequency. 
3. CODE CALL DIGIT COUNT (l-4) = n 
Requests number of digits that can be sent to the code-calling equip- n = number of digits (14). 
ment. Enter (CR> for no change. Procedure is completed. 
. 
3. PAGING ZONE TO BE CHANGED (l-4) = n 
Requests new paging zone. n = paging zones (14). 
IO. GIVE BACKGROUND MUSIC ON IDLE? (‘f/N)= a 
Requests Music to be provided when paging equipment is idle. Proce a = Y = Yes; a = N = No. 
dure is completed. 
Il. VOICE MAIL PEN (VVXYZ) = nnnn 
Requests PEN to be assigned to voice mail interface. nnnn = valid PEN. 
12. NEW VOICE MAIL EXTENSION NUMBER = nnnn 
Requests new voice mail extension number. nnnn = extension number. 
13. 
NEW CLASS OF SERVICE (O-31) = nn 
Requests new class of service number for voice mail. Procedure is 
completed. nn = class of service number (O-31). 
Table 509.1 Interface Types Required for Special Equipment 
SPECIAL EQUIPMENT 
TYPE 
CODE 
DICT 
MUSIC 
RECANN 
VOICEMAIL 
XCVRTEST 
ZUNA REQUIRED INTERFACE 
CO Trunk 
SLMA or SlA16 Lines 
E&M Trunk, SLMA Line, or .%A16 Line 
E&M Trunk, SLMA Line, or SlA16 Line 
SLMA or SlA16 Lines 
Data Test Transceiver 
SLMA or %A16 Lines  
						

							SATURN EPABX ’ A30808-X5051-E120-4-8919 
CMU Procedures issue 6, November 1985 
CUSTOMER MEMORY UPDATE PROCEDURE: SPCLEQPT 
TITLE: Special Equipment Assignments 
MNEMONICS USED IN THIS CMU PROCEDURE: 
Mnemonic 
ACD 
ACDREC 
CONT 
(CR> 
DEMAND 
DCI 
DP 
DTMF 
IOP 
INCPTREC 
MUSIC 
PAGEn 
PEN 
RECANN 
START 
UNA 
XCVRTESI- 
ZUNA Definition 
Automatic Call Distribution 
ACD Recorded Announcement 
Continuous Play Mode 
Carriage Return (RETURN key) 
Demand Play Mode 
Data Communications interface (Siemens) 
Dial Pulse 
Dual-Tone Multifrequency 
input/Output Port 
intercept Recorded Announcement 
Music-On-Hold Feature 
Paging Zone - Zone ‘n’ (14) 
Port Eauioment Number 
Recorded Announcement 
Start Mode (Party Connected at Start of Cycle) 
Universal Night Answer 
Transceiver Test 
Zoned Universal Night Answer 
, . . . . . . . -, . 
I - 
- 
Page 6 of 6  
						

							SATURN EPABX A30808-X5051-El20-l-B919 - 
CMU Procedures Issue 1, December 1984 
CUSTOMER MEMORY UPDATE PROCEDURE: SPEEDGRP 
TITLE: Speed Calling Group Assignments piLiz-/ 
Access Level: 2, 3, 4 Page 1 of 1 
STEP NO. PROMPT/EXPLANATION 
1. ) DIS SPEEDGRP 
2. SPEED CALLING GROUP NUMBER (l-4) = n 
Requests number of speed calling group for which data is to be n = group number (l-4). 
displayed. Enter (CR) for all speed calling groups (l-4). 
1. ) CHA SPEEDGRP 
2. SPEED CALLING GROUP NUMBER (l-4) = n 
Requests number of speed calling group for which data is to be n = group number(l-4). 
changed. 
3. GROUP MEMBER INDEX NUMBER (O-63) = nn 
Requests index number of speed call group to change. nn = index (O-63). 
4. DIGIT SEQUENCE (I-18 DIGITS) = aa . . . aa 
Requests new digits to be entered in speed call list for this group. aa . aa = digit sequence (18 digits 
maximum). 
NOTE: The digits O-9 may be used. The * may be used in the digit sequence to indicate a 3-second pause. 
The * may also be used as the last digit, to indicate that supplementary dialing is permitted. 
If the digit sequence is longer than 16 digits, insert a space in the middle of the extended digit sequence. 
This space does not affect the outdialing of the digit sequence.  
						

							SATURN EPABX A30808X5051-El2048919 
CMU Procedures Issue 7, January 1986 
CUSTOMER MEMORY UPDATE PROCEDURE: STNASSN 
TITLE: Station Assignments 
Access Level: 2, 3, 4 
I STNASSN 
I 
Page 1 of 6 
STEP NO. PROMPT/EXPLANATION 
1. 
2. ) DIS STNASSN 
STATION EXTENSION NUMBER=nnnn . . . nnnn 
Requests station number(s) for which data is to be displayed. If range 
desired, enter two numbersseparated by space. Enter (CR> to dis- 
play all. nnnn = station number(s) (O-9999). 
) ADD STNASSN 
STATION EXTENSION NUMBER=nnnn 
Requests number of station to be added. 
TYPE=aaaaaaaaa 
Requests type of station to be added. If DPI or DPl2, go to step 8. 
If NONE, go to step 13. If DP16, DTMF16, ELEC16, or HOTLINEIG, 
go to step 12. For others, go to step 4. nnnn = station number (O-9999). 
aaaaaaaaa = station type; see Table 201.1. 
NOTE: Button map 0 is the default assignment for DPls. This map consists of two assigned buttons: Button Num- 
ber 1 is assigned as STNDEF (for assignment of the Prime Line); Button Number 2 is assigned as XFER. 
Button map 0 may not be changed via the CMU procedures. 
I. OFF-PREMISES STATION? (Y, N)=a 
Requests whether this is an Off-Premises Station (OPS). If Y (Yes), 
a = Y = Yes; 
go to step 5. If N (No), go to step 12. a = N = No. 
5. IS OFF-PREMISES STN FOR Tl? (Y, N)=a 
Requests whether the OPS is used for Tl. If Y (Yes), go to step 6. a = Y = Yes; 
If N (No), go to step 12. a = N = No. 
5. ENTER TMD NUMBER FOR STN (l-15)=nn 
Requests Trunk Module Digital (TMD) number associated with the 
nn = TMD number (1-15). 
OPS. 
NOTE: You can have a total of 2 Tl spans with SATURN II and 15 with SATURN III. 
7. SPECIAL ACCESS SERVICE? (Y, N)=a 
Requests whether or not a special access service is used. Verify with a = Y = Yes; 
operating company the type of signaling used: either Foreign Ex- a = N = No. 
change (FX) or Special Access Service (SP). 
If a = N (No), no special access service is required. 
If a = Y (Yes), a special access service is used. 
Go to step 12. 
NOTE: Entering (CR) is the same as entering N for No. 
8. TERM PREF (NO,RING,INC)=aaaa 
I 
Requests terminating line preference type for DPI. aa = NO = NO preference; 
aaaa = RING = RlNGing line; 
aaa = INC = INComing Call. 
NOTE: Entering (CR) is the same as entering NO for NO preference.  
						

							SATURN EPABX 
CMU Procedures A30808-X5051-Et20-4-B919 
Issue 7, January 1986 
CUSTOMER MEMORY UPDATE PROCEDURE: STNASSN 
TITLE: Station Assignments Page 2 of. 6 
STEP NO. PROMPT/EXPl-ANATION 
3. ORIG PREF (NO,PRIME,LAST,IDLE)=aaaaa 
Requests originating line preference type for DPI. 
aa = NO = no preference; 
aaaaa = PRIME = prime line; 
aaaa = LAST = last line used; 
aaaa = IDLE = idle line. 
NOTE: Entering (CR) is the same as entering PRIME for prime line. 
IO. PRIVACY AUTOMATIC (ENA,DIS)=aaa 
Requests whether the automatic privacy feature for the DPI is to be aaa = ENA = ENAble; 
enabled or disabled. aaa = DIS = Disable. 
NOTE: Entering (CR) is the same as entering DIS for disable. 
Il. AUTO INCOMING CALL COMP (ENA, DIS) = aaa 
Requests whether to enable or disable the AICC processing for calls aaa = ENA = ENAble; 
completed to the station (DPls and DYADs). aaa = DIS = DlSable. 
12. PORT EQUIPMENT NUMBER (WXYZ)=nnnn 
Requests PEN of station to be added. nnnn = valid PEN; see Table 201.2 for 
channel number PEN 
assignments. 
NOTE: “WX” fields of PEN are the ADLTU shelf and Trunk Group numbers respectively. 
13. CLASS OF SERVICE NUMBER (O-3!)=nn 
Requests COS of station to be added. nn = station COS (O-31). 
14. TENANT GROUP NUMBER (OQ54))=nnn 
Requests Tenant Group Number nnn = tenant group (O-254). 
15. VFAC REQUIRED ? (Y,N)= a 
Requests the user to specify if VFAC verification should be applied a = Y = Yes; 
to outgoing calls on this station. a = N = No. 
If YES - VFAC verification is applied. 
If NO - No verification required. 
16. CALL FWD TYPE (FIXED,SECR,NONE) =aaaaa 
Requests Call Forwarding type. If Fixed, go to 17. If Secreterial, go aaaaa = FIXED = Fixed; 
to 18. If None, go to 19. 
aaaa = SECR = Secreterial; 
aaaa = NONE = None. 
17. CALL FWD ON (BUSY, NOANS, BOTH) = aaaaa 
Requests condition(s) when CFW will be implemented. aaaa = BUSY = Busy; 
aaaaa = NOANS = No Answer; 
aaaa = BOTH = Busy and No 
Answer. 
18. CALL FWD DESTINATION EXT NUM = nnnn 
1 
Requests destination extension number for CFW. nnnn = extension 
number (O-9999).  
						

							i- 
SATURN EPABX 
CMU Procedures A30808-X5051-E120-4-B919 
Issue 7, January 1986 
CUSTOMER MEMORY UPDATE PROCEDURE: STNASSN 
TITLE: Station Assignments 
Page 3 of 6 
STEP NO. PROMPT/EXPLANATION 
19. OFFHOOK ALARM EXT NUM =nnnn 
I 
Requests extension number for Off-Hook alarm. nnnn = extension number (O-9999). 
I 
20. SMDR ACCOUNT NUMBER IDX (O-254)=nnn 
Requests SMDR account index number. Enter (CR) for none. nnn = SMDR index (O-254). 
21. HOT LINE DEST TABLE INDEX (O-31)=nn 
Requests Hotline destination index number. Enter (CR) for none. nn = hotline destination index (O-31). 
1. ) DEL STNASSN 
2. STATION EXTENSION NUMBER=nnnn 
Requests station number to be deleted from data base. nnnn = station number (O-9999). 
NOTE: When deleting a station that is a Call Forwarding - ( Secretarial or Off-Hook Alarm (OFFHOOK)) desiina- 
tion, the user needs to take one of two courses of action. Either: 
1. Change the FWDTOSECR / OFFHOOK destination of the stations affected, or 
. 2. Change the Class of Service (COS) of the affected stations to a COS which does not include the 
FWDTOSECR I OFFHOOK classmark. 
1. 1 CHA STNASSN I 
2. OLD STATION EXTENSION NUMBER=nnnn 
I 
Requests station number for which data is to be changed. nnnn = siation number (O-9999). 
3. STATION EXTENSION NUMBER=nnnn I 
I 
Requests new station number for station being changed. Enter (CR) nnnn = station number (O-9999). 
for no change. 
I I 
4. TYPE=aaaaaaaaa 
Requests new type of station being changed. Enter (CR) for no 
change. aaaaaaaaa = station type; see Table 201 .l. 
NOTE: Type changes are possible only so long as the PCB type assigned to the PEN is not required to change. 
For example, DTMF to DP is allowed, but DPI (two channel DPI) to DP12 (DPI II or DYAD) is not allowed 
(PCB change required). 
5. 
CLASS OF SERVICE NUMBER (O-31)=nn 
1 
1 I Requests new COS of station being changed. Enter (CR> for no nn = station COS (O-31). 
change. 
6. NEW TENANT GROUP NUMBER (O-254)=nnn 
I I Requests Tenant Group Number. nnn = tenant group (O-254).  
						

							I - 
SATURN EPABX 
CMU Procedures A30808X5051-E120-4-B919 
Issue 7, January 1986 
CUSTOMER MEMORY UPDATE PROCEDURE: STNASSN 
TITLE: Station Assignments Page 4 of 6 
I ~~ STEP NO. PROMPT/EXPLANATION 
I 
7. I NEW STATE OF VFAC (ACT,DIS) =aaa 
I 
Allows the user to modify the VFAC treatment for this station. 
If ACT - VFAC verification is applied. 
If DIS - No verification required. 
8. NEW DEST (FlXED,SECR,OFFHOOK,NONE) = aaaaaaa 
Requests new destination for forwarded calls. 
If Fixed go to 9. 
If Secretarial/OffHook go to 10. 
If None go to 11. aaa = ACT = ACTive; 
aaa = DIS = D&able. 
aaaaa = FIXED = Fixed; 
aaaa = SECR = Secretarial; 
aaaaaaa = OFFHOOK = Off-Hook Alarm; 
aaaa = NONE = None. 
9. CALL FWD ON (BUSY,NOANS,BOTH) = aaaaa 
Requests new condition(s) when CFW will be implemented. aaaa = BUSY = Busy; 
aaaaa = NOANS = No Answer; 
aaaa = BOTH = Busy and No 
Answer. 
10. CALL FWDlOFFHK ALM EXT NUM =nnnn 
Requests extension number for CFW or Off-Hook alarm. nnnn = extension number (O-9999). 
11. CHANGE SMDR ACCT NUM IDX? C/,N)=a 
I 
Requests whether SMDR account number index is to be changed. a = Y = Yes; 
If Yes, go to step 12. a = N = No. 
If No, go to step 13. 
12. SMDR ACCOUNT NUMBER IDX (O-254)=nnn 
Requests new SMDR account index number; if none, depress nnn = SMDR index (O-254). 
RETURN key and continue. 
NOTE: Entering (CR) is the same as entering N for No. 
13. CHGE HOT LINE DEST TBL IDX?(Y,N)=a 
I 
Requests whether Hotline destination table index is to be changed. a = Y = Yes; 
If Yes, go to step 14. a = N = No. 
If No, go to step 15. 
NOTE: Entering (CR) is the same as entering N for No. 
14. HOT LINE DEST TABLE INDEX (O-31)=nn 
Requests new Hotline destination index number; if none, enter (CR> nn = Hotline destination index (O-31). 
and continue. 
15. TERM PREF (NO,RING,INC)=aaaa 
Requests new terminating line preference type for DPI. 
Enter (CR) for no change. aa = NO = no preference; 
aaaa = RING = ringing line; 
aaa= INC = incoming call.