NEC Neax 2400 Ipx Feature Programming Manual
Have a look at the manual NEC Neax 2400 Ipx Feature Programming Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 446
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 403
Inter-Office Off-Hook Queuing I-11
I-11 Inter-Office Off-Hook Queuing
General Description
This feature can be employed in a Main-Satellite configuration to allow a Satellite user to queue for LEAST COST
ROUTING - 3/6-DIGIT [L-5] at the Main location. This feature can also be used when all outgoing facilities are
concentrated at the Main location.
Operating Procedure
Operation at the Main location
1. The Main location receives dialed...](http://img.usermanuals.tech/thumb/54/84273/w64_nec-neax2400-ipx-feature-programming-manual_d-445.png "Page 446
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 403
Inter-Office Off-Hook Queuing I-11
I-11 Inter-Office Off-Hook Queuing
General Description
This feature can be employed in a Main-Satellite configuration to allow a Satellite user to queue for LEAST COST
ROUTING - 3/6-DIGIT [L-5] at the Main location. This feature can also be used when all outgoing facilities are
concentrated at the Main location.
Operating Procedure
Operation at the Main location
1. The Main location receives dialed...")
![Page 450
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 407
Internal Zone Paging I-21
I-21 Internal Zone Paging
General Description
This feature allows an individual to make a voice call through the Dtermspeakers of the designated group by dialing
the INTERNAL ZONE PAGING access code or pressing the INTERNAL ZONE PAGING key on the Dterm.
Operating Procedure
To originate
1. Lift the handset; receive dial tone.
2. Dial the access code or press the feature key for INTERNAL ZONE PAGING [I-21];...](http://img.usermanuals.tech/thumb/54/84273/w64_nec-neax2400-ipx-feature-programming-manual_d-449.png "Page 450
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 407
Internal Zone Paging I-21
I-21 Internal Zone Paging
General Description
This feature allows an individual to make a voice call through the Dtermspeakers of the designated group by dialing
the INTERNAL ZONE PAGING access code or pressing the INTERNAL ZONE PAGING key on the Dterm.
Operating Procedure
To originate
1. Lift the handset; receive dial tone.
2. Dial the access code or press the feature key for INTERNAL ZONE PAGING [I-21];...")
![Page 452
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 409
Internal Zone Paging I-21
Operating Procedure (cont’d)
c.) To answer by using CALL PICKUP-DIRECT [C-30]:
Note 1:The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s).
Note 2:The number of digit of IZP group number is determined by SYS1, Index 804, bit 3.
bit 0=0: 2-digit (group 01~99) Ex. When IZPG=1, dial 01.
bit 0=1: 3-digit (group 001~255) Ex. When IZPG=1, dial 001.
OPERATIONTONE CONTROLDTERM DISPLAY
CALLING...](http://img.usermanuals.tech/thumb/54/84273/w64_nec-neax2400-ipx-feature-programming-manual_d-451.png "Page 452
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 409
Internal Zone Paging I-21
Operating Procedure (cont’d)
c.) To answer by using CALL PICKUP-DIRECT [C-30]:
Note 1:The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s).
Note 2:The number of digit of IZP group number is determined by SYS1, Index 804, bit 3.
bit 0=0: 2-digit (group 01~99) Ex. When IZPG=1, dial 01.
bit 0=1: 3-digit (group 001~255) Ex. When IZPG=1, dial 001.
OPERATIONTONE CONTROLDTERM DISPLAY
CALLING...")
![Page 453
NEAX2400 IPX Feature Programming ManualPage 410NDA-24297, Issue 1
I-21 Internal Zone Paging
Operating Procedure (cont’d)
d.) To answer by using CALL PICKUP-GROUP [C-7]:
Note 1:The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s).
Note 2:The number of digit of IZP group number is determined by SYS1, Index 804, bit 3.
bit 0=0: 2-digit (group 01~99) Ex. When IZPG=1, dial 01.
bit 0=1: 3-digit (group 001~255) Ex. When IZPG=1, dial 001.
OPERATIONTONE CONTROLDTERM DISPLAY
CALLING...](http://img.usermanuals.tech/thumb/54/84273/w64_nec-neax2400-ipx-feature-programming-manual_d-452.png "Page 453
NEAX2400 IPX Feature Programming ManualPage 410NDA-24297, Issue 1
I-21 Internal Zone Paging
Operating Procedure (cont’d)
d.) To answer by using CALL PICKUP-GROUP [C-7]:
Note 1:The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s).
Note 2:The number of digit of IZP group number is determined by SYS1, Index 804, bit 3.
bit 0=0: 2-digit (group 01~99) Ex. When IZPG=1, dial 01.
bit 0=1: 3-digit (group 001~255) Ex. When IZPG=1, dial 001.
OPERATIONTONE CONTROLDTERM DISPLAY
CALLING...")
![Page 454
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 411
Internal Zone Paging I-21
Operating Procedure (cont’d)
2. Voice Call by Internal Zone Paging [I-20] (Station Hold)
a.) To answer: Using Prime Line:
Note 2
Note 1:
The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s).
Note 2:Using Prime Line or Off-Hook to answer is selected by the ASYD SYS1, Index 388, bit 4 0/1: Press Prime
Line key after Off-Hook/Press Off-Hook.
Note 3:The number of digit of IZP group number...](http://img.usermanuals.tech/thumb/54/84273/w64_nec-neax2400-ipx-feature-programming-manual_d-453.png "Page 454
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 411
Internal Zone Paging I-21
Operating Procedure (cont’d)
2. Voice Call by Internal Zone Paging [I-20] (Station Hold)
a.) To answer: Using Prime Line:
Note 2
Note 1:
The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s).
Note 2:Using Prime Line or Off-Hook to answer is selected by the ASYD SYS1, Index 388, bit 4 0/1: Press Prime
Line key after Off-Hook/Press Off-Hook.
Note 3:The number of digit of IZP group number...")
![Page 456
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 413
Internal Zone Paging I-21
Operating Procedure (cont’d)
c.) To answer by using Call Pickup-Direct [C-30]:
Note 1:The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s).
Note 2:The number of digit of IZP group number is determined by SYS1, Index 804, bit 3.
bit 0=0: 2-digit (group 01~99) Ex. When IZPG=1, dial 01.
bit 0=1: 3-digit (group 001~255) Ex. When IZPG=1, dial 001.
OPERATIONTONE CONTROLDTERM DISPLAY...](http://img.usermanuals.tech/thumb/54/84273/w64_nec-neax2400-ipx-feature-programming-manual_d-455.png "Page 456
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1Page 413
Internal Zone Paging I-21
Operating Procedure (cont’d)
c.) To answer by using Call Pickup-Direct [C-30]:
Note 1:The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s).
Note 2:The number of digit of IZP group number is determined by SYS1, Index 804, bit 3.
bit 0=0: 2-digit (group 01~99) Ex. When IZPG=1, dial 01.
bit 0=1: 3-digit (group 001~255) Ex. When IZPG=1, dial 001.
OPERATIONTONE CONTROLDTERM DISPLAY...")
NEAX2400 IPX Feature Programming ManualPage 408NDA-24297, Issue 1 I-21 Internal Zone Paging Operating Procedure (cont’d) b.) To Answer by using Off-Hook key:Note 2 Note 1: The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s). Note 2:Using Prime Line or Off-Hook to answer is selected by the ASYD SYS1, Index 388, bit 4 0/1: Press Prime Line key after Off-Hook/Press Off-Hook. Note 3:The number of digit of IZP group number is determined by SYS1, Index 804, bit 3. bit 0=0: 2-digit (group 01~99) Ex. When IZPG=1, dial 01. bit 0=1: 3-digit (group 001~255) Ex. When IZPG=1, dial 001. OPERATIONTONE CONTROLDTERM DISPLAY CALLING PARTYCALLED PARTYCALLING PARTYCALLED PARTYCALLING PARTYCALLED PARTY (1) Lift the Handset (Speaker key)(1) Dial Tone can be heard (2) Dial the access code for IZP [I-21] (IZP key)(2) 2 ndDial Tone can be heard (3) Dial the IZP group number Note 3(1 )Chime(s) can be heardNote 1 *P=Prime Line (1) Lift the Handset PG PG GPNOPG XXXXX P: flash Voice Call is made from Dterm speakers in the IZP group. XXXXXXXXXX P: light Two way conversation is made.
NEAX2400 IPX Feature Programming Manual NDA-24297, Issue 1Page 409 Internal Zone Paging I-21 Operating Procedure (cont’d) c.) To answer by using CALL PICKUP-DIRECT [C-30]: Note 1:The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s). Note 2:The number of digit of IZP group number is determined by SYS1, Index 804, bit 3. bit 0=0: 2-digit (group 01~99) Ex. When IZPG=1, dial 01. bit 0=1: 3-digit (group 001~255) Ex. When IZPG=1, dial 001. OPERATIONTONE CONTROLDTERM DISPLAY CALLING PARTYCALLED PARTYCALLING PARTYCALLED PARTYCALLING PARTY CALLED PARTY (1) Lift the Handset (Speaker key)(1) Dial Tone can be heard (2) Dial the access code for IZP [I- 21] (IZP key)(2) 2ndDial Tone can be heard (3) Dial the IZP group number Note 2(1) Chime(s) can be heardNote 1 *P=Prime Line (1) Lift the Handset (2) Dial the access code for Call Pickup-Direct [C- 30] (3) Dial the desired station number in the IZP [I-21] group(2) Dial Tone can be heard (3) 2 ndDial Tone can be heard PG PG GPNOPG XXXXX P: flash Voice Call is made from Dterm speakers in the IZP group. XXXXXXXXX P: light Two way conversation is made.
NEAX2400 IPX Feature Programming ManualPage 410NDA-24297, Issue 1 I-21 Internal Zone Paging Operating Procedure (cont’d) d.) To answer by using CALL PICKUP-GROUP [C-7]: Note 1:The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s). Note 2:The number of digit of IZP group number is determined by SYS1, Index 804, bit 3. bit 0=0: 2-digit (group 01~99) Ex. When IZPG=1, dial 01. bit 0=1: 3-digit (group 001~255) Ex. When IZPG=1, dial 001. OPERATIONTONE CONTROLDTERM DISPLAY CALLING PARTYCALLED PARTYCALLING PARTYCALLED PARTYCALLING PARTY CALLED PARTY (1) Lift the Handset (Speaker key)(1) Dial Tone can be heard (2) Dial the access code for IZP [I- 21] (IZP key)(2) 2 ndDial Tone can be heard (3) Dial the IZP group number Note 2(1) Chime(s) can be heardNote 1 *P=Prime Line (1) Lift the Handset (2) Dial the access code for Call Pickup-Group [C- 7] (Call Pickup key)(2) Dial Tone can be heard PG PG GPNOPG XXXXX P: flash Voice Call is made from Dterm speakers in the IZP group. XXXXXXXXXX P: light Two way conversation is made.
NEAX2400 IPX Feature Programming Manual NDA-24297, Issue 1Page 411 Internal Zone Paging I-21 Operating Procedure (cont’d) 2. Voice Call by Internal Zone Paging [I-20] (Station Hold) a.) To answer: Using Prime Line: Note 2 Note 1: The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s). Note 2:Using Prime Line or Off-Hook to answer is selected by the ASYD SYS1, Index 388, bit 4 0/1: Press Prime Line key after Off-Hook/Press Off-Hook. Note 3:The number of digit of IZP group number is determined by SYS1, Index 804, bit 3. bit 0=0: 2-digit (group 01~99) Ex. When IZPG=1, dial 01. bit 0=1: 3-digit (group 001~255) Ex. When IZPG=1, dial 001. OPERATIONTONE CONTROLDTERM DISPLAY OPERATING PARTYCALLED PARTYOPERATING PARTYCALLED PARTYCALLING PARTYOPERATING PARTYCALLED PARTYCALLING PARTY (1) Receive a call (2) Perform the SHF(1) Special Dial Tone can be heard(1) MSC can be heard (3) Dial the access code for IZP [I-21] (IZP key)(2) 2 ndDial Tone can be heard (4) Dial the IZP group number Note 3(1)Chime(s) can be heard Note 1 •Lift the Handset (after/ before) •Press Prime Line key for the IZP call (5) Replace the handset(2) MSC is stopped Two way conversation between the calling and called party is made. IZP: Internal Zone Paging XXXXXXXXXX XFRHOLD PGHOLD PG GPNOPG XXXXX P: flash HOLD Voice Call is made from Dterm speakers in the IZP group. XXXXXXXXXX P: light HOLD Two way conversation is made. (time)XXXXXXXXXX
NEAX2400 IPX Feature Programming ManualPage 412NDA-24297, Issue 1 I-21 Internal Zone Paging Operating Procedure (cont’d) b.) To answer by using Off-Hook key:Note 2 Note 1: The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s). Note 2:Using Prime Line or Off-Hook to answer is selected by the ASYD SYS1, Index 388, bit 4 0/1: Press Prime Line key after Off-Hook/Press Off-Hook. Note 3:The number of digit of IZP group number is determined by SYS1, Index 804, bit 3. bit 0=0: 2-digit (group 01~99) Ex. When IZPG=1, dial 01. bit 0=1: 3-digit (group 001~255) Ex. When IZPG=1, dial 001. OPERATIONTONE CONTROLDTERM DISPLAY OPERATING PARTYCALLED PARTYOPERATING PARTYCALLED PARTYCALLING PARTYOPERATING PARTYCALLED PARTYCALLING PARTY (1) Receive a call (2) Perform the SHF(1) Special Dial Tone can be heard(1) MSC can be heard (3) Dial the access code for IZP [I-21] (IZP key)(2) 2 ndDial Tone can be heard (4) Dial the IZP group number Note 2(1)Chime(s) can be heard Note 1 *P=Prime Line (1) Lift the Handset (5) Replace the handset(2) MSC is stopped Two way conversation between the calling and called party is made. XXXXXXXXXX XFRHOLD PGHOLD PG GPNOPG XXXXX P: flash HOLD Voice Call is made from Dterm speakers in the IZP group. Two way conversation is made. XXXXXXXXXX P: light HOLD (time)XXXXXXXXXX
NEAX2400 IPX Feature Programming Manual NDA-24297, Issue 1Page 413 Internal Zone Paging I-21 Operating Procedure (cont’d) c.) To answer by using Call Pickup-Direct [C-30]: Note 1:The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s). Note 2:The number of digit of IZP group number is determined by SYS1, Index 804, bit 3. bit 0=0: 2-digit (group 01~99) Ex. When IZPG=1, dial 01. bit 0=1: 3-digit (group 001~255) Ex. When IZPG=1, dial 001. OPERATIONTONE CONTROLDTERM DISPLAY OPERATING PARTYCALLED PARTYOPERATING PARTYCALLED PARTYCALLING PARTYOPERATING PARTYCALLED PARTYCALLING PARTY (1) Receive a call (2) Perform the SHF(1) Special Dial Tone can be heard(1) MSC can be heard (3) Dial the access code for IZP number [I- 21] (IZP key)(2) 2 ndDial Tone can be heard (4) Dial the IZP group number Note 2(1)Chime(s) can be heard Note 1 *P=Prime Line (1) Lift the Handset (Speaker key) (2) Dial the access code for Call Pickup- Direct [C-30] (3) Dial the desired station number in the IZP [I- 21] group(2) Dial Tone can be heard (3) 2 ndDial Tone can be heard (5) Replace the handset Two way conversation between the calling and called party is made.(2) MSC is stopped XXXXXXXXXX XFRHOLD PGHOLD PG GPNOPG XXXXX P: flash HOLD Voice Call is made from Dterm speakers in the IZP group. XXXXXXXXXX P: light HOLD Two way conversation is made. (time)XXXXXXXXXX
NEAX2400 IPX Feature Programming ManualPage 414NDA-24297, Issue 1 I-21 Internal Zone Paging Operating Procedure (cont’d) d.) To answer by using Call Pickup-Group [C-7]: Note 1:The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s). Note 2:The number of digit of IZP group number is determined by SYS1, Index 804, bit 3. bit 0=0: 2-digit (group 01~99) Ex. When IZPG=1, dial 01. bit 0=1: 3-digit (group 001~255) Ex. When IZPG=1, dial 001. OPERATIONTONE CONTROLDTERM DISPLAY OPERATING PARTYCALLED PARTYOPERATING PARTYCALLED PARTYCALLING PARTYOPERATING PARTYCALLED PARTYCALLING PARTY (1) Receive a call (2) Perform the SHF(1) Special Dial Tone can be heard(1) MSC can be heard (3) Dial the access code for IZP number [I- 21] (IZP key)(2) 2 ndDial Tone can be heard (4) Dial the IZP group number Note 2(1)Chime(s) can be heard Note 1 *P=Prime Line (1) Lift the Handset (2) Dial the access code for Call Pickup Group [C-7] (Call Pickup- Group key)(2) Dial Tone can be heard (5) Replace the handset(2) MSC is stopped Two way conversation between the calling and called party is made. XXXXXXXXXX XFRHOLD PGHOLD PG GPNOPG XXXXX P: flash HOLD Voice Call is made from Dterm speakers in the IZP group. XXXXXXXXXX P: light HOLD Two way conversation is made. (time)XXXXXXXXXX
NEAX2400 IPX Feature Programming Manual NDA-24297, Issue 1Page 415 Internal Zone Paging I-21 Operating Procedure (cont’d) 3. Voice Call by Internal Zone Paging (Trunk Hold) a.) ToanswerbyusingPrimeLine: Note 2 Note 1: The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s). Note 2:Using Prime Line or Off-Hook to answer is selected by the ASYD SYS1, Index 388, bit 4 0/1: Press Prime Line key after Off-Hook/Press Off-Hook. Note 3:The number of digit of IZP group number is determined by SYS1, Index 804, bit 3. bit 0=0: 2-digit (group 01~99) Ex. When IZPG=1, dial 01. bit 0=1: 3-digit (group 001~255) Ex. When IZPG=1, dial 001. OPERATIONTONE CONTROLDTERM DISPLAY OPERATING PARTYCALLED PARTYOPERATING PARTYCALLED PARTYCALLING PARTYOPERATING PARTYCALLED PARTYCALLING PARTY (1) Receive a call (2) Perform the SHF(1) Special Dial Tone can be heard(1) MSC can be heard (3) Dial the access code for IZP [I-21] (IZP key)(2) 2 ndDial Tone can be heard (4) Dial the IZP group number Note 3(1)Chime(s) can be heard Note 1 *P=Prime Line •Lift the Handset (after/before) •Press Prime Line key for the IZP call (5) Replace the handset(2) MSC is stopped Two way conversation between the calling and called party is made. XX:XX DDD2 XFR PG PG GPNOPG XXXXX P: flash Voice Call is made from Dterm speakers in the IZP group. XXXXXXXXXX P: light Two way conversation is made. (time)XX:XX DDD2
NEAX2400 IPX Feature Programming ManualPage 416NDA-24297, Issue 1 I-21 Internal Zone Paging Operating Procedure (cont’d) b.) To answer by using Off-Hook key:Note 2 Note 1: The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s). Note 2:Using Prime Line or Off-Hook to answer is selected by the ASYD SYS1, Index 388, bit 4 0/1: Press Prime Line key after Off-Hook/Press Off-Hook. Note 3:The number of digit of IZP group number is determined by SYS1, Index 804, bit 3. bit 0=0: 2-digit (group 01~99) Ex. When IZPG=1, dial 01. bit 0=1: 3-digit (group 001~255) Ex. When IZPG=1, dial 001. OPERATIONTONE CONTROLDTERM DISPLAY OPERATING PARTYCALLED PARTYOPERATING PARTYCALLED PARTYCALLING PARTYOPERATING PARTYCALLED PARTYCALLING PARTY (1) Receive a call (2) Perform the SHF(1) Special Dial Tone can be heard(1) MSC can be heard (3) Dial the access code for IZP [I-21] (IZP key)(2) 2 ndDial Tone can be heard (4) Dial the IZP group number Note 3(1)Chime(s) can be heard Note 1 *P=Prime Line (1) Lift the Handset (5) Replace the handset(2) MSC is stopped Two way conversation between the calling and called party is made. XX:XX DDD2 XFR PG PG GPNOPG XXXXX P: flash Voice Call is made from Dterm speakers in the IZP group. XXXXXXXXXX P: light Two way conversation is made. (time)XX:XX DDD2
NEAX2400 IPX Feature Programming Manual NDA-24297, Issue 1Page 417 Internal Zone Paging I-21 Operating Procedure (cont’d) c.) To answer by using Call Pickup-Direct [C-30]: Note 1:The number of the chime can be set by ASYD SYS1, Index 321, b7 0/1: 4/1 time (s). OPERATIONTONE CONTROLDTERM DISPLAY OPERATING PARTYCALLED PARTYOPERATING PARTYCALLED PARTYCALLING PARTYOPERATING PARTYCALLED PARTYCALLING PARTY (1) Receive a call (2) Perform the SHF(1) Special Dial Tone can be heard(1) MSC can be heard (3) Dial the access code for IZP [I-21] (IZP key)(2) 2 ndDial Tone can be heard (4) Dial the IZP group number Note 2(1)Chime(s) can be heard Note 1 *P=Prime Line (1) Lift the Handset (Speaker key) (2) Dial the access code for Call Pickup- Direct [C-30](2) Dial Tone can be heard (3) 2 ndDial Tone can be heard (3) Dial the desired station number in the IZP [I- 21] group (5) Replace the handset Two way conversation between the calling and called party is made.(2) MSC is stopped XX:XX DDD2 XFR PG PG GPNOPG XXXXX P: flash Voice Call is made from Dterm speakers in the IZP group. XXXXXXXXXX P: light Two way conversation is made. (time)XX:XX DDD2