Lucent Technologies Definity Audix System Release 4.0 Screens Reference Manual

							DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-219 display System-Parameters imapi-Options 
3
LA N  Su b n e t  M as k Set s  A U D I X I P Su b n e t  M as k.  
This is obtained  from the LAN 
administrator.nnn.nnn.nnn.nnn where nnn 
is a number between 0 to 
255. (You must enter  “ .” )
Default LAN 
Gateway IP Ad d ressSets Default LAN Gateway IP 
Ad d ress. This is ob tained  from 
the LAN ad ministrator.
nnn.nnn.nnn.nnn where nnn 
is a numb er from 1 to 126 or 
from 128 to 254. (You must 
enter  “.”)
Link Integ rity Must b e ad ministered  to 
ind icate if the LAN Network 
Interfac e Card  has link integ rity 
turned on or off.y (link integrity is on)
n (link integ rity is off)y 
						

							DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-220 display System-Parameters Limits 
3
display System-Parameters Limits
The System-Parameters Limits sc reen is used  to ad minister limits on sp ac e 
alloc ation for messag es, sub sc rib ers, and  ad ministration lists and  log s. 
display system-parameters limits 
change system-parameters limits  
						

							DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-221 display System-Parameters Limits 
3
Field Descriptions
Name Description Valid Entries Default
Messag e Leng ths, 
MaximumLeng th, in second s, of the long est 
messag e that c an b e c reated  b y any 
sub sc rib er. Maximum messag e 
lengths for individual subscribers 
c an b e further restricted  on the c lass 
of servic e and sub scrib er sc reens.16 to 1200 1200 
Messag e Leng ths, 
MinimumLeng th, in tenths of a second, of the 
shortest messag e that the DEFINITY 
AUDIX System rec ognizes as a 
messag e0 to 99 10 tenths
Messag es, Total in 
All Mailb oxesMaximum numb er of messag es 
exp ec ted  in all sub sc rib ers’ 
mailb oxes at any one time0 to 999999 50000 
Messag es, Awaiting  
DeliveryMaximum numb er of messag es 
exp ec ted  in the system d elivery 
q ueue. The rec ommended  value is 
10% of the value in the Messag es, 
Total in All Mailb oxes field .0 to 999999.  5000 
Sub sc ribers, Loc al Maximum numb er of local 
sub sc rib ers that can be 
administered  on this DEFINITY 
A U D I X Sy st e m1 to 100000 1000
Sub sc r i b e r s,  
Administered  
Rem ot eMaximum numb er of remote 
administered  sub sc rib ers that this 
DEFINITY AUDIX System c an 
acc ommod ate0 to 50000000 1000
Lists, Total Entries Total number of entries allowed in all 
sub sc rib ers’ lists0 to 999999 50000 
Lists/Sub sc rib ers Maximum numb er of lists allowed  
per subscribers0 to 999 100 
Rec ipients/List Maximum numb er of entries 
(rec ipients) allowed p er sub scrib er 
list0 to 250 250 
Administration Log  
Ent r i esMaximum numb er of ad ministration 
log  entries. When the maximum is 
reac hed , the oldest entries are 
removed to make room for the 
newest.1 to 2000 1000  
						

							DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-222 display System-Parameters Link-Log (CL Mode) 
3
display System-Parameters Link-Log 
(CL Mode)
The System-Parameters Link Log sc reen is used  to ad minister the link log , 
inc lud ing  enabling  or d isab ling  the link-log  d ata c ollec tion, enab ling  or d isab ling 
the log g ing  of MWI up d ates, setting  the maximum numb er of link-log  entries, and  
c learing  the link log. 
display system-parameters link-log 
change system-parameters link-log 
NOTE:
The activation commands for this sc reen can be executed by users with 
craft or hig her-level log in p ermissions. 
						

							DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-223 display System-Parameters Link-Log (CL Mode) 
3
Field Descriptions
Name Description Valid Entries Default
Link Log  Enab led ? Enab les link log d ata c ollec tion. If 
enab led , record s are written to the 
log. If disabled, records are not 
written to the log .y (link log  d ata 
collec tion is enab led ) 
n (link log d ata 
collec tion is halted)n 
Maximum Numb er of 
Link Log  EntriesSpec ifies the maximum number of 
rec ords in the link-log  file1 to 5000 5000 
!WA R N I N G :
Red ucing the maximum numb er of entries will c ause the link log  to b e c leared . 
Clear All Entries in 
Link Log ? Spec ifies whether the entries in the 
link log  will b e resety (p ressing   (Enter) 
clears the link log ) 
n (has no effect)nF3 
						

							DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-224 display System Parameters Maintenance 
3
display System Parameters 
Maintenance
The System Parameters Maintenanc e sc reen is used to d efine system 
p arameters related to installation and  maintenanc e, inc lud ing  system serial 
numb er, name, loc ation, alarm rep orting  telep hone numb er, and  other 
maintenanc e features. 
display system-parameters maintenance 
change system-parameters maintenance 
You c annot make c hang es using  this sc reen while an alarm c all is in p rog ress. 
NOTE:
Th e  change system-parameters maintenance
 c ommand  c an b e 
exec uted  by users with 
craft or hig her-level log in p ermissions. This sc reen 
c an b e ac tivated  while the DEFINITY AUDIX System is in the OA&M state. 
The System Parameters Maintenanc e
 sc reen has two p ag es. 
						

							DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-225 display System Parameters Maintenance 
3
Field Descriptions
Name Description Valid Entries Default
PA G E  1
Prod uct 
Identification 
Numb erNumb er b y which this DEFINITY AUDIX 
System is known to the Op erational 
Su p p o r t Sys t em  ( OSS) .  Thi s f i el d  i s 
required  if an entry is made in the 
Automatic Alarm Rep orting Telephone 
Numb er field  on this screen.blank 10 digit integer 
b eginning with the d ig it 2blank 
Mac hine 
Network 
NameDesc rip tive name for the DEFINITY 
AUDIX System, d efined  on the Mac hine 
screenname of up  to 8 
alp hanumeric  charac tersaud ix
display 
only
System 
Loc ationDesc rip tive loc ation name for the 
DEFINITY AUDIX Systemname of up  to 30 
alp hanumeric  charac tersblank
Manual 
Trouble 
Reporting 
Numb erTelephone number to manually rep ort 
DEFINITY AUDIX troub les (normally the 
AUDIX help line). Defaults to 
1-800-56AUDIX, if c alling  from within 
the USAnumb er of up  to 30 d igits 
(and /or letters)  
						

							DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-226 display System Parameters Maintenance 
3
Automatic  
Alarm 
Reporting 
Telep hone 
Numb erMod em command  string  for automatic  
alarm referral c alls g enerated  b y this 
DEFINITY AUDIX System
Multip le c ommas (,) may b e used  for a 
g reater d elay time. If d ialing  from the 
internal tip/ring modem port, ATDT 
must b e the first c harac ters in the dial 
string. If using an MPDM, B must b e the 
first charac ter in the d ial string . For 
examp le, to d ial 9, p ause, and  dial a 
numb er on the tip /ring  p ort, enter 
ATDT9,1234567. 1 to 65 
alp hanumeric -c harac ter 
c omp lete mod em 
c ommand string 
(inc lud ing  a c ommand 
p refix suc h as ATDT, if 
req uired ),
 (Pause, tip /ring  default 
p ause =  2 sec ond s)
B (send a 
break to an 
MPDM)
AT (command  the 
internal tip /ring  mod em 
port
DT (dial on the internal 
tip/ring modem port)blank 
Rem ot e  
Mod em 
Initialization 
Str i n gInitialization string req uired  to set 
p rotoc ols that will allow DEFINITY 
AUDIX System to c ommunic ate with the 
external mod em.For the US Rob otic s 
Sp ortster 33.6:
at&f0e1x4&a3&b1&k0&n
6&u2s0= 1s13= 1y0&w0
For the Parad yne 
Comsphere mod els 3810 
and  3820:
at&f0e1b 0x6y0&d 2&t5\k1
\q 0%c 0” h0s41= 3s49= 0s
55= 1&w0
For the Parad yne 
Comsphere mod el 3910:
at&f0e1x6y0&d 2&t5\k1\q
0%c 0”h0s41= 3s49= 0s55
=1&w0
In the initialization string , 
the letters must b e all 
c ap italized or all lower 
case.
If you have a mod em 
other than the ones listed  
ab ove, see
 Installation 
and  Switc h 
Ad ministration for the 
DEFINITY AUDIX System 
Release 4.0,
 
585-300-122.at&f0e1x4
&a3&b 1&k
0&n6&u2s
0= 1s13= 1y
0&w0
Alarm 
Origination 
Rem ot e  
Acc ess Port 
Baud  RateBaud  rate used  when orig inating  an 
outg oing  alarm call1200, 2400, 4800, 9600. 
System 
NOTEsUsed  to enter NOTEs ab out this 
system, suc h as installation dates, 
up grad e spec ifications and  d ates, 
hard ware rep lacement rec ord sup  to four 80 charac ter 
lines of alphanumeric  
c haracterblank  Name Description Valid Entries Default 
						

							DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-227 display System Parameters Maintenance 
3
PAGE 2 
Alarm 
Origination 
Active?Sp ec ifies whether or not Alarm 
Orig ination is active on this DEFINITY 
AUDIX System. Alarm Orig ination 
allows AUDIX to call an Operation 
Supp ort System (OSS) when a major or 
minor alarm oc curs.
When this field is set to n, no Alarms 
Resolved notific ation is sent b y the 
DEFINITY AUDIX System, and  no alarm 
c alls are not sent for alarms occ urring .y (ac tivate alarm 
orig ination) 
n (deactivate alarm 
orig ination) n 
All Alarms 
Res ol v ed  
Notific ation?Sp ec ifies whether All Alarms Resolved  
Notification is enab led  on this DEFINITY 
AUDIX System. If enab led , after all 
acknowled g ed major and minor alarms 
are resolved, the DEFINITY AUDIX 
System send s an all-c lear messag e to 
the Op erations Supp ort System (OSS). 
This field  is not effec tive if Alarm 
Orig ination is not active.y (enab le all alarms 
resolved notific ation) 
n (disab le all alarms 
resolved notific ation)n 
Alarm Ac tion Alarm ac tion for major & minor alarms 
for each alarm category. call or none 
for each alarm type (major or minor) for 
eac h alarm categ ory. Relay and  b oth 
for major alarms only for each alarm 
category.
If Alarm Orig ination is not active then 
the both and  call are affected  as 
follows. If both was spec ified , the 
DEFINITY AUDIX System op erates only 
the relay c ontact closure. If call was 
spec ified  and  if the failure mod e in the 
Close Contac ts on Alarm Orig ination 
Failure field  ind icates that the c ontact 
c losure should  b e op erated, this occ urs 
within 5 minutes. Otherwise nothing is 
done. mand atory inp ut field s 
relay (op erate only the 
c ontact closure relay)
c all (p lace only an 
alarm-origination call)
b oth (p erform b oth 
actions)
none (perform neither 
action)call
NOTE:
Alarm origination c annot b e activated  unless the Prod uct ID Number and  
Automatic  Alarm Rep orting  Telep hone Numb er field s are filled  in. 
Close 
Contacts on 
Alarm 
Origination 
Failure?Sp ec ifies whether to op erate relay 
c ontact c losures when alarm orig ination 
fails for major alarms with call sp ec ified.y (op erate relay-contac t 
c losures) 
n (do not op erate 
relay-c ontact c losures)y 
Maximum 
Numb er of 
Event Log  
Ent r i esMaximum numb er of entries in the 
event log .1 to 30000 10000  Name Description Valid Entries Default 
						

							DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Screen Descriptions 
3-228 change/display System-Parameters Outcalling 
3
change/display System-Parameters 
Outcalling
The System-Parameters Outc alling sc reen is used  to ad minister the 
system-related  outc alling  p arameters. Outc alling  alerts sub sc rib ers when new 
messages are received, by placing a call to a number specified by the 
sub sc rib er. The outc alling  p arameters also affec t the AMIS Analog  Networking 
and  Messag e Delivery features. This feature uses voic e p ort resourc es. 
display system-parameters outcalling 
change system-parameters outcalling