Lucent Technologies Definity Audix System Release 4.0 Screens Reference Manual

							585-300-213
Comcode 108356098
Issue 1
May 1999
DEFINITY® AUDIX® System
Release 4.0
Screens Reference 
						

							Copyright Ó 1999, Lucent Technologies
All Rights Reserved, Printed in U.S.A.
Notice
Every effort was made to ensure that the information in this book was 
complete and accurate at the time of printing.  However, information is 
subject to change.
Your Responsibility for Your System’s Security
Toll fraud is the unauthorized use of your telecommunications system 
by an unauthorized party, for example, persons other than your com-
pany’s employees, agents, subcontractors, or persons working on your 
company’s behalf. Note that there may be a risk of toll fraud associated 
with your telecommunications system and, if toll fraud occurs, it can 
result in substantial additional charges for your telecommunications 
services.
You and your system manager are responsible for the security of your 
system, such as programming and configuring your equipment to pre-
vent unauthorized use. The system manager is also responsible for 
reading all installation, instruction, and system administration docu-
ments provided with this product in order to fully understand the fea-
tures that can introduce risk of toll fraud and the steps that can be taken 
to reduce that risk. Lucent Technologies does not warrant that this 
product is immune from or will prevent unauthorized use of com-
mon-carrier telecommunication services or facilities accessed through 
or connected to it. Lucent Technologies will not be responsible for any 
charges that result from such unauthorized use.
Lucent Technologies Fraud Intervention
If you suspect you are being victimized by toll fraud and you need 
technical support or assistance, call the appropriate BCS National Cus-
tomer Care Center telephone number. Users of the MERLIN®, PART-
NER®, and System 25 products should call 1 800 628 2888. Users of 
the System 75, System 85, DEFINITY® Generic 1, 2 and 3, and 
DEFINITY® ECS products should call 1 800 643 2353. Customers 
outside the continental United States should contact their local Lucent 
representative, or call one of the above numbers in the following man-
ner:
• Dial the International Access Code; for example, 011.
• Dial the country code for the U.S., that is, 01.
• Lastly, dial either of the telephone numbers provided above.
 
Lucent Technologies Web Page
The world wide web home page for Lucent Technologies is:
 http://www.lucent.com
Federal Communications Commission Statement
Part 15: Class A Statement. This equipment has been tested and 
found to comply with the limits for a Class A digital device, pursuant 
to Part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference when the equipment is 
operated in a commercial environment. This equipment generates, 
uses, and can radiate radio-frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a resi-
dential area is likely to cause harmful interference, in which case the 
user will be required to correct the interference at his own expense.Industry Canada (IC) Interference Information
This digital apparatus does not exceed the Class A limits for radio 
noise emissions set out in the radio interference regulations of Industry 
Canada.
Le Présent Appareil Nomérique n’émet pas de bruits radioélectriques 
dépassant les limites applicables aux appareils numériques de la class 
A préscrites dans le reglement sur le brouillage radioélectrique édicté 
par le Industrie Canada.
Trademarks
See the preface of this document.
Ordering Information
Call: Lucent Technologies BCS Publications Center
Voice 1 800 457-1235   International Voice 317 322-6791
Fax 1 800 457-1764      International Fax 317 322-6699
Write: Lucent Technologies BCS Publications Center
2855 N. Franklin Road
Indianapolis, IN 46219
Order: Document No. 585-300-213
Comcode 108356098
Issue 1, May 1999
For additional documents, refer to the section in “About This Docu-
ment” entitled “Related Resources.” 
You can be placed on a standing order list for this and other documents 
you may need. For more information on standing orders, or to be put on 
a list to receive future issues of this document, contact the Lucent Tech-
nologies Publications Center.
Obtaining Products
To learn more about Lucent Technologies products and to order prod-
ucts, contact Lucent Direct, the direct-market organization of Lucent 
Technologies Business Communications Systems. Access their web 
site at www.lucentdirect.com. Or call the following numbers: custom-
ers 1 800 451 2100, account executives 1 888 778 1880 (voice) or 1 
888 778 1881 (fax).
War ra nty
Lucent Technologies provides a limited warranty on this product. Refer 
to the “Limited Use Software License Agreement” card provided with 
your package.
European Union Declaration of Conformity
The “CE” mark affixed to the equipment means that it conforms to the 
following directives. Lucent Technologies Business Communications 
Systems declares that DEFINITY AUDIX System equipment specified 
in this document conforms to the referenced European Union (EU) 
Directives and Harmonized Standards listed below:
EMC Directive 89/336/EEC   
Low-Voltage Directive73/23/EEC
Acknowledgment
This document was prepared by OMD Technical Publications, Lucent 
Technologies, Denver, CO. and Columbus, OH. 
						

							DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Contents 
iii  
Contents
Contents iii
About This Document xiii
nIntended Audiencexiii
nOrganizationxiv
nHow to Use This Documentxv
nConventions Used in This Documentxv
nRelated Resourcesxvi
nTrademarks and Service Marksxvi
nHow to Make Comments About This Documentxvi
1 Using the DEFINITY AUDIX Screens 1-1
nUsing the DEFINITY AUDIX Screens1-1
System Administration1-1
System Maintenance1-2
nScreen Layout1-3
Screen-Labeled Function Keys1-4
Function Key Equivalents1-5
nThe Command Line1-5
Verb-Object Orientation1-5
Command Line Verbs1-6
Command Line Objects1-6
Command Line Qualifiers1-6
Command Line Help1-7
Command Line Abbreviation1-7
Command History and Command Line Editing1-8
nWorking in the DEFINITY AUDIX Screen1-9
Screen Help1-9
Data Entry1-10
Windowing on the 715 Terminal1-11
2 Screen Organization 2-1
nScreens Organized by Verb2-1
Screen Navigation2-13
nScreen Commands2-14
Add2-15 
						

							DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Contents 
iv  
Audit2-15
Busyout2-16
Change2-16
Copy2-17
Disable2-17
Display2-18
Enable2-18
Help2-19
List2-20
Release2-20
Remove2-21
Reset2-21
Save2-22
Set2-22
Status2-23
Test2-23
3 Screen Descriptions 3-1
ndisplay Activity-Log3-2
Field Descriptions3-3
nlist Address-Ranges3-5
Field Descriptions3-5
ndisplay Administration-Log3-6
Field Descriptions3-8
Additional Specifications3-8
ndisable/enable Alarm-Origination3-9
Field Descriptions3-9
status Alarm-Origination3-10
Field Descriptions3-10
test Alarm-Origination3-11
Field Descriptions3-12
Additional Specifications3-13
ndisplay Alarms3-14
Field Descriptions3-15
nadd Announcement-Set3-18
Field Descriptions3-18 
						

							DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Contents 
v  
copy Announcement Set3-19
Field Descriptions3-19
list Announcement-Sets3-20
ndisplay Announcement Id3-21
Field Descriptions3-22
copy Announcement Id3-22
Field Descriptions3-23
save Announcements3-24
Field Descriptions3-24
Additional Specifications3-25
nlist Attendants3-26
Field Descriptions3-26
nAuto-Attendant3-27
Field Description3-28
change Auto-Attend-routing Business-Schedule3-28
Field Description3-29
change Auto-Attend Routing Holiday-Schedule3-30
Field Description3-31
display Auto-Attend-Routing Routing-
Table Schedule3-32
Field Description3-33
display Auto-Attend-Routing Menu-Tree3-34
Field Description3-34
nlist Auto-Attend-Schedules3-35
nAudit3-36
Field Descriptions3-36
Sample Tasks3-36
Additional Specifications3-36
ndisplay/restore Backups3-37
Field Descriptions3-38
Sample Tasks3-40
ntest Board3-41
Field Descriptions3-43
Additional Specifications3-43
nlist Configuration3-44
Field Descriptions3-44 
						

							DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Contents 
vi  
ndisplay Class of Service (COS)3-45
Field Descriptions3-46
list COS3-53
Field Descriptions3-53
nstatus Disk3-54
Field Descriptions3-55
ndisplay Errors3-56
Field Descriptions3-57
ndisplay Events3-60
Field Descriptions3-61
nchange Extensions3-65
Field Descriptions3-66
Additional Specifications3-66
nlist Extensions3-67
Field Descriptions3-67
ndisplay Fragment3-68
Field Descriptions3-68
copy Fragment3-69
Field Descriptions3-69
nHelp3-70
ntest LAN3-71
Additional Specifications3-72
ndisplay Machine3-73
Field Descriptions3-74
Additional Specifications3-77
nlist Machines3-78
Field Descriptions3-78
nRemote Machine3-79
ntest Machine3-83
Function Keys3-84
naudit Mailboxes3-85
Field Descriptions3-85
Sample Tasks3-86
Additional Specifications3-86
naudit Mailing-Lists3-87 
						

							DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Contents 
vii  
Field Descriptions3-87
Sample Tasks/Additional Specifications3-87
naudit Maintenance-Logs3-88
Field Descriptions3-88
Sample Tasks/Additional Specifications3-88
nlist Measurements Community Day3-89
Field Descriptions3-90
nlist Measurements Community Hour3-91
Field Descriptions3-92
nlist Measurements Feature Day3-93
Field Descriptions3-94
nlist Measurements Feature Hour3-97
Field Descriptions3-98
nlist Measurements Network-Load Day3-101
Field Descriptions3-101
nlist Measurements Network-Load Hour3-103
Field Descriptions3-104
nlist Measurements Load Day3-105
Field Descriptions3-106
nlist Measurements Load Hour3-108
Field Descriptions3-109
nlist Measurements Remote-Messages Day3-111
Field Descriptions3-112
nlist Measurements Remote-Messages Month3-115
Field Descriptions3-116
nlist Measurements Special-Features Day3-119
Field Descriptions3-120
nlist measurements Special-Features Hour3-121
Field Descriptions3-122
nlist Measurements Subscriber Day3-123
Field Descriptions3-125
nlist Measurements Subscriber Month3-128
Field Descriptions3-130
nadd/remove MO-Disk3-133
Field Descriptions 3-134 
						

							DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Contents 
viii  
Sample Tasks3-135
nstatus MO-Disk3-136
Field Descriptions 3-137
ntest MO-Disk3-138
Field Descriptions 3-139
Sample Tasks3-139
status Test3-140
Field Descriptions3-140
Sample Tasks3-140
Additional Specifications3-140
naudit Names3-141
Field Descriptions3-141
Sample Tasks/Additional Specifications3-141
naudit Network Data3-142
Field Descriptions3-142
nchange/display Network-Group3-143
Field Descriptions3-144
nbusyout Network-Port3-145
Field Descriptions3-146
Sample Tasks3-146
ntest Network-Port3-147
Field Description (display only)3-148
nsave Nightly3-149
Field Descriptions3-150
Sample Tasks3-150
Additional Specifications3-150
nchange Password3-151
Field Descriptions3-151
naudit Personal-Directories3-152
Field Descriptions3-152
Sample Tasks/Additional Specifications3-152
nbusyout Port3-153
Field Descriptions3-154
Sample Tasks3-154
test Port3-155 
						

							DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Contents 
ix  
Field Descriptions3-156
Sample Tasks3-156
Additional Specifications3-157
nlist Remote-Extensions3-158
Field Descriptions3-159
nadd Remote-Subscriber3-160
Field Descriptions3-161
nget Remote-Updates3-163
Field Description3-163
ndisplay Subscriber3-164
Field Descriptions3-166
naudit Subscriber-Data3-174
Field Descriptions3-174
Sample Tasks/Additional Specifications3-174
list Subscribers3-175
Field Descriptions3-175
ndisplay Switch-Link (CL Mode)3-176
Field Descriptions 3-177
ndisplay Switch-Link (DS Mode)3-179
Field Descriptions 3-180
busyout Switch-Link3-181
Field Descriptions 3-181
status Switch-Link3-182
Field Descriptions 3-182
test Switch-Link Long (CL Mode)3-184
Field Descriptions 3-184
Sample Tasks3-185
naudit Switch-Names (DS Mode)3-186
Field Descriptions3-186
ndisplay Switch-Time-Zone3-187
Field Descriptions3-188
naudit Switch-Translations3-189
Field Descriptions3-189
Sample Tasks/Additional Specifications3-189
nreset System OA&M3-190 
						

							DEFINITY AUDIX System Release 4.0 Screens Reference  585-300-213  Issue 1
May 1999
Contents 
x  
Field Descriptions3-192
Sample Tasks3-192
Additional Specifications3-192
nreset System Reboot3-193
Field Descriptions3-195
Sample Tasks3-195
Additional Specifications3-195
nreset System Restart3-196
Field Descriptions3-197
Sample Tasks3-198
Additional Specifications3-198
nreset System Shutdown3-199
Field Descriptions3-201
Sample Tasks3-201
Additional Specifications3-201
ndisplay System-Parameters Activity Log3-202
Field Descriptions3-203
ndisplay System Parameters Analog Network3-204
Field Descriptions3-204
ndisplay System-Parameters Customer Options3-206
Field Descriptions3-207
ndisplay System-Parameters Features3-209
Field Descriptions3-211
ndisplay System-Parameters imapi-Options3-217
Field Description3-218
ndisplay System-Parameters Limits3-220
Field Descriptions3-221
ndisplay System-Parameters Link-Log 
(CL Mode)3-222
Field Descriptions3-223
ndisplay System Parameters Maintenance3-224
Field Descriptions3-225
nchange/display System-Parameters Outcalling3-228
Field Descriptions3-230
nchange System-Parameters Password3-231
Field Descriptions3-231