Kyocera FS 1028MFP User Manual

							Default Setting (System Menu) 
OPERATION GUIDE8-133
8
4Press the OK key. The Network Setting menu 
appears.
5Press the  U or  V key to select [WSD-SCAN].
6Press the  OK key. The WSD-SCAN menu appears.
7Press the  U or  V key to select [On] or [Off].
8Press the  OK key.  Completed.  is displayed and the 
screen returns to the  Network Settings menu.
WSD Print Setup
Select whether or not to use WS D Print. The default setting is On.
Use the procedure below to setup the WSD-PRINT setting.  The machine must be restarted after the setting is 
changed.
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [System], and press the  OK key.
When you are performing user management and 
have not logged in, a login screen will appear. 
Then, enter the user ID and password to log in, and 
press [Login] (the  Right Select key).
2The System menu appears.
Network Setting:a  b 
*********************
2  NetWare
3  AppleTalk
[ Exit ]
1  TCP/IP Settings
WSD-SCAN:
a  b 
*********************
2  On
1 *Off
Sys. Menu/Count.:
a  b 
1  Report
2  Counter
*********************
[ Exit ]
3  System
Login User Name:
L  b 
*******************
Login Password:
[ Menu ] [ Login ]
System:a  b 
*********************
2  I/F Block Set.
3  Security Level [ Exit ]
1  Network Setting
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-134OPERATION GUIDE
3Press the U or  V key to select [Network Setting].
4Press the  OK key. The Network Setting menu 
appears.
5Press the  U or  V key to select [WSD-PRINT].
6Press the  OK key. The WSD-PRINT menu 
appears.
7Press the  U or  V key to select [On] or [Off].
8Press the  OK key.  Completed.  is displayed and the 
screen returns to the  Network Settings menu. 
Network Setting:a  b 
*********************
2  NetWare
3  AppleTalk
[ Exit ]
1  TCP/IP Settings
WSD-PRINT:
a  b 
*********************
2  On
1 *Off
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
OPERATION GUIDE8-135
8
Protocol Detail
Make other network related settings. 
Item Description Default Setting Restarting the 
System*
NetBEUI Selects whether or not to  receive documents using 
NetBEUI. On
×
LPD Select whether or not to 
receive documents using 
LPD as the network 
protocol. On
z
FTP (Server) Select whether or not to  receive documents using 
FTP. On
z
FTP (Client) Select whether or not to  send documents using FTP, 
and the number of the port 
to be used. On
Port number: 21
×
Raw Port Select whether or not to  receive documents using 
Raw Port. On
z
LDAP Select whether or not to use 
LDAP. Off
×
SNMP Select whether or not to 
communicate using SNMP. On
z
SNMPv3 Set SNMPv3. Offz
SMB Select whether or not to 
send documents using 
SMB, and the number of the 
port to be used. On
Port number: 
139
×
SMTP 
(E-mail TX) Select whether or not to 
send 
e-mail  using SMTP. Off
×
POP3 
(E-mail RX) Select whether or not to 
receive e-mail
 using POP3. Off
×
HTTP Select whether or not to 
communicate using HTTP. On
z
HTTPS Select whether or not to 
communicate using HTTPS.
SSL must be set to  [On] in 
SSL Setting on page 8-138 .On
z
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-136OPERATION GUIDE
Use the procedure below.
1In the Sys. Menu/Count. menu, press the 
U or  V 
key to select [System], and press the  OK key.
When you are performing user management and 
have not logged in, a login screen will appear. 
Then, enter the user ID and password to log in, and 
press [Login] (the  Right Select key).
2The System menu appears.
3Press the U or  V key to select [Network Setting].
4Press the  OK key. The Network Setting menu 
appears.
5Press the  U or  V key to select [TCP/IP Settings].
IPP
Select whether or not to use 
IPP, and the number of the 
port to be used. Off
Port number: 
631
z
IPP over  SSL Select whether or not to use  IPP over SSL.
SSL must be set to [On] in 
SSL Setting on page 8-138 .On
z
*z: The machine must be restarted after the setting is changed.
×: The machine does not need to be restarted after the setting is changed.
Item Description Default Setting Restarting the 
System*
Sys. Menu/Count.:a  b 
1  Report
2  Counter
*********************
[ Exit ]
3  System
Login User Name:
L  b 
*******************
Login Password:
[ Menu ] [ Login ]
System:a  b 
*********************
2  I/F Block Set.
3  Security Level [ Exit ]
1  Network Setting
Network Setting:
a  b 
*********************
2  NetWare
3  AppleTalk [ Exit ]
1  TCP/IP Settings
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
OPERATION GUIDE8-137
8
6Press the OK key. The TCP/IP Settings menu 
appears.
7Press the  U or  V key to select  [Protocol Detail].
8Press the OK key. The Protocol Detail menu 
appears.
9Press the  U or  V key to select the item for which 
you want to make settings.
10Press the  OK key. This displays the setting screen 
for the item selected in step 9.
The screen shown is the o ne when [FTP(Client)] is 
selected.
11Press the  U or  V key to select [On] or [Off].
If you select [On] for each of [FTP(Client)] and [IPP] 
and press the  OK key, a port number entry screen 
appears.
Press the  U or  V key or the numeric keys to set the 
port number.
12Press the  OK key.  Completed.  is displayed and the 
screen returns to the Protocol Detail menu.
TCP/IP Settings:a  b 
2  IPv4 Setting
3  IPv6 Setting
*********************
[ Exit ]
4  Protocol Detail
Protocol Detail:
a  b 
*********************
2  SNMPv3
3  FTP(Server) [ Exit ]
1  NetBEUI
FTP(Client):a  b 
*********************
2  On
1 *Off
Port Number:D  b 
(1 - 65535)
      *******21*
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-138OPERATION GUIDE
Network Security
The network security functions can be set up to protect printer operation and the print data.
The following network security settings are available.
• SSL Setting …8-138
• SNMPv3 Setting …8-143
• IPSec Setting …8-144
SSL Setting
This allows you to use SSL network security for communication. You can use SSL Setup to select whether or 
not SSL is used and to specify the IPP port and HTTP port security settings.
SSL
Make this setting Make this setting when you use SSL. The default setting is  Off.
Use the procedure below to make the setting.
 
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [System], and press the  OK key.
When you are performing user management and 
have not logged in, a login screen will appear. 
Then, enter the user ID and password to log in, and 
press [Login] (the  Right Select key).
2The System menu appears.
3Press the U or  V key to select [Network Setting].
Sys. Menu/Count.:a  b 
1  Report
2  Counter
*********************
[ Exit ]
3  System
Login User Name:
L  b 
*******************
Login Password:
[ Menu ] [ Login ]
System:a  b 
*********************
2  I/F Block Set.
3  Security Level [ Exit ]
1  Network Setting
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
OPERATION GUIDE8-139
8
4Press the OK key. The Network Setting menu 
appears.
5Press the  U or  V key to select [Secure Protocol].
6Press the  OK key. Secure Protocol appears.
7Press the  U or  V key to select [SSL].
8Press the  OK key. SSL appears.
9Press the  U or  V key to select [On] or [Off].
10Press the  OK key.  Completed.  is displayed and the 
screen returns to the Secure Protocol menu.
IPP Security
Specify the protocol to be used for IPP. The default setting is  IPP/IPP over SSL.
Use the procedure below to make the setting.
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [System], and press the  OK key.
When you are performing user management and 
have not logged in, a login screen will appear. 
Then, enter the user ID and password to log in, and 
press [Login] (the  Right Select key).
Network Setting:a  b 
*********************
8  Host Name
9  LAN Interface
[ Exit ]
7  Secure Protocol
Secure Protocol:
a  b 
*********************
2  IPP Security
3  HTTP Security [ Exit ]
1  SSL
SSL:
a  b 
*********************
2  On [ Exit ]
1 *Off
Sys. Menu/Count.:
a  b 
1  Report
2  Counter
*********************
[ Exit ]
3  System
Login User Name:
L  b 
*******************
Login Password:
[ Menu ] [ Login ]
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-140OPERATION GUIDE
2The System menu appears.
3Press the U or  V key to select [Network Setting].
4Press the  OK key. The Network Setting menu 
appears.
5Press the  U or  V key to select [Secure Protocol].
6Press the  OK key. Secure Protocol appears.
7Press the  U or  V key to select [IPP Security].
8Press the  OK key. IPP Security appears.
9Press the  U or V  key to select [IPP/IPP over SSL] 
or [IPPoverSSL only].
10Press the  OK key.  Completed.  is displayed and the 
screen returns to the Secure Protocol menu.
HTTP Security
Specify the protocol to be used for HTTP. The default setting is  HTTPS only.
Use the procedure below to make the setting.
System:a  b 
*********************
2  I/F Block Set.
3  Security Level [ Exit ]
1  Network Setting
Network Setting:
a  b 
*********************
8  Host Name
9  LAN Interface [ Exit ]
7  Secure Protocol
Secure Protocol:
a  b 
1  SSL
*********************
3  HTTP Security [ Exit ]
2  IPP Security
IPP Security:
a  b 
1  IPP/IPP over SSL
*********************2 *IPPoverSSL only
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
OPERATION GUIDE8-141
8
1In the Sys. Menu/Count. menu, press the U or  V 
key to select [System], and press the  OK key.
When you are performing user management and 
have not logged in, a login screen will appear. 
Then, enter the user ID and password to log in, and 
press [Login] (the  Right Select key).
2The System menu appears.
3Press the U or  V key to select [Network Setting].
4Press the  OK key. The Network Setting menu 
appears.
5Press the  U or  V key to select [Secure Protocol].
6Press the  OK key. Secure Protocol appears.
7Press the  U or  V key to select [HTTP Security]. 
8Press the  OK key. HTTP Security appears.
Sys. Menu/Count.:a  b 
1  Report
2  Counter
*********************
[ Exit ]
3  System
Login User Name:
L  b 
*******************
Login Password:
[ Menu ] [ Login ]
System:a  b 
*********************
2  I/F Block Set.
3  Security Level [ Exit ]
1  Network Setting
Network Setting:
a  b 
*********************
8  Host Name
9  LAN Interface [ Exit ]
7  Secure Protocol
Secure Protocol:
a  b 
1  SSL
2  IPP Security
*********************
[ Exit ]
3  HTTP Security
HTTP Security:
a  b 
1  HTTP/HTTPS
*********************2 *HTTPS only
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-142OPERATION GUIDE
9Press the U or  V key to select [HTTP/HTTPS] or 
[HTTPS only].
10Press the  OK key.  Completed.  is displayed and the 
screen returns to the Secure Protocol menu.
LDAP Security
Specify the protocol to be used  for LDAP. The default setting is  Off.
Use the procedure below to make the setting. 
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [System], and press the  OK key.
When you are performing user management and 
have not logged in, a login screen will appear. 
Then, enter the user ID and password to log in, and 
press [Login] (the  Right Select key).
2The System menu appears.
3Press the U or  V key to select [Network Setting].
4Press the  OK key. The Network Setting menu 
appears.
5Press the  U or  V key to select [Secure Protocol].
Sys. Menu/Count.:a  b 
1  Report
2  Counter
*********************
[ Exit ]
3  System
Login User Name:
L  b 
*******************
Login Password:
[ Menu ] [ Login ]
System:a  b 
*********************
2  I/F Block Set.
3  Security Level [ Exit ]
1  Network Setting
Network Setting:
a  b 
*********************
8  Host Name
9  LAN Interface [ Exit ]
7  Secure Protocol
Downloaded From ManualsPrinter.com Manuals