Kyocera FS 1028MFP User Manual

							Default Setting (System Menu) 
OPERATION GUIDE8-73
8
4Press the OK key. EcoPrint appears.
5Press the  U or  V key to select [Off] or [On].
6Press the  OK key.  Completed.  is displayed and the 
screen returns to  the Printer menu.
Override A4/LTR
Select whether to treat A4 size and Letter, which are similar in size, as the same size when printing. The table 
below shows the available settings.
Use the procedure below to specify the overri de A4/Letter setting. The default setting is On.
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [Printer].
2Press the  OK key. The Printer menu appears.
3Press the  U or  V key to select [Override A4/LTR].
EcoPrint:a  b 
*********************
2  On
1 *Off
Item Description
On A4 and Letter are regarded as the same in 
size. The machine will  use whichever size 
is in the paper source.
Off A4 and Letter are not regarded as the 
same in size.
Sys. Menu/Count.:a  b 
7  Copy
*********************
9  Send
[ Exit ]
8  Printer
Printer:
a  b 
*********************
2  EcoPrint
3  Override A4/LTR [ Exit ]
1  Emulation Set.
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-74OPERATION GUIDE
4Press the OK key. Override A4/LTR appears.
5Press the  U or  V key to select [Off] or [On].
6Press the  OK key.  Completed.  is displayed and the 
screen returns to  the Printer menu.
Duplex
Select binding orientation for duplex mode.  The table below shows the available settings.
Use the procedure below to select a duplex setting.
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [Printer].
2Press the  OK key. The Printer menu appears.
3Press the  U or  V key to select [Duplex].
Override A4/LTR:a  b 
1  Off
*********************2 *On
Item Description Finish 
Off No duplex mode
Bind Long 
Edge Longer edge 
bound
Bind Short 
Edge Shorter edge 
bound 
Sys. Menu/Count.:a  b 
7  Copy
*********************
9  Send
[ Exit ]
8  Printer
Printer:
a  b 
*********************
2  EcoPrint
3  Override A4/LTR [ Exit ]
1  Emulation Set.
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
OPERATION GUIDE8-75
8
4Press the OK key. Duplex appears.
5Press the  U or  V key to select [Off], [Bind Long 
Edge] or [Bind Short Edge].
6Press the  OK key.  Completed.  is displayed and the 
screen returns to  the Printer menu.
Copies
Set the default number of copies, from 1 to 999.
Use the procedure below to specif y the default number of copies.
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [Printer].
2Press the  OK key. The Printer menu appears.
3Press the  U or  V key to select [Copies].
4Press the  OK key. Copies appears.
5Press the  U or  V key or the numeric keys to set the 
default number of copies.
6Press the  OK key.  Completed.  is displayed and the 
screen returns to  the Printer menu.
Duplex:a  b 
*********************
2  Bind Long Edge
3  Bind Short Edge
1 *Off
Sys. Menu/Count.:
a  b 
7  Copy
*********************
9  Send [ Exit ]
8  Printer
Printer:
a  b 
*********************
2  EcoPrint
3  Override A4/LTR [ Exit ]
1  Emulation Set.
Copies:
D  b 
 (1 - 999)
 *****999*copies
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-76OPERATION GUIDE
Orientation
Set the default orientation, Portrait or Landscape .
Use the procedure below to set the default orientation for printing.
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [Printer].
2Press the  OK key. The Printer menu appears.
3Press the  U or  V key to select [Orientation].
4Press the  OK key. Orientation appears.
5Press the  U or  V key to select [Portrait] or 
[Landscape].
6Press the  OK key.  Completed.  is displayed and the 
screen returns to  the Printer menu.
PrinterPrinter
Portrait Landscape 
Sys. Menu/Count.:a  b 
7  Copy
*********************
9  Send
[ Exit ]
8  Printer
Printer:
a  b 
*********************
2  EcoPrint
3  Override A4/LTR [ Exit ]
1  Emulation Set.
Orientation:
a  b 
*********************
2  Landscape
1 *Portrait
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
OPERATION GUIDE8-77
8
FormFeed Timeout
Receiving print data from the computer, the machine ma y sometimes wait if there is no information signalling 
that the last page does not have any more data to be  printed. When the preset timeout passes, the machine 
automatically prints paper. The op tions are between 5 and 495 seconds.
Use the procedure below to set the form feed timeout.
1In the Sys. Menu/Count. menu, press the  U or  V 
key to select [Printer].
2Press the  OK key. The Printer menu appears.
3Press the  U or  V key to select [FormFeed 
Timeout].
4Press the  OK key. FormFeed Timeout appears.
5Press the  U or  V key to set the Form Feed 
Timeout. You can set the timeout delay in seconds. 
You cannot use the numeric keys to enter this 
value.
6Press the  OK key.  Completed.  is displayed and the 
screen returns to  the Printer menu.
LF Action
Set the line feed action when the machine receives the  line feed code (character code 0AH). The table below 
shows the available settings. The default setting is  LF Only.
Sys. Menu/Count.:a  b 
7  Copy
*********************
9  Send
[ Exit ]
8  Printer
Printer:
a  b 
*********************
2  EcoPrint
3  Override A4/LTR [ Exit ]
1  Emulation Set.
FormFeed TimeOut: *  
b 
 (5 - 495)
 ******30*Sec.
Item Description 
LF Only Only line feed performed. 
LF and CR Line feed and character return performed.
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-78OPERATION GUIDE
Use the procedure below to specify a LF action.
1In the Sys. Menu/Count. menu, press the 
U or  V 
key to select [Printer].
2Press the  OK key. The Printer menu appears.
3Press the  U or  V key to select [LF Action].
4Press the  OK key. LF Action appears.
5Press the  U or  V key to select [LF Only], [LF and 
CR] or [Ignore LF].
6Press the  OK key.  Completed.  is displayed and the 
screen returns to  the Printer menu.
CR Action
Set the character return action when the machine receives  the character return code (character code 0DH). The 
table below shows the available settings. The default setting is  CR Only.
Ignore LF
No line feed performed. 
Item
Description 
Sys. Menu/Count.:a  b 
7  Copy
*********************
9  Send
[ Exit ]
8  Printer
Printer:
a  b 
*********************
2  EcoPrint
3  Override A4/LTR [ Exit ]
1  Emulation Set.
LF Action:
M  b 
*********************
2  LF and CR
3  Ignore LF
1 *LF Only
Item Description 
CR Only Only character return performed. 
LF and CR Character return and line feed performed.
Ignore CR No character return performed.
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
OPERATION GUIDE8-79
8
Use the procedure below to specify a CR action.
1In the Sys. Menu/Count. menu, press the U or  V 
key to select [Printer].
2Press the  OK key. The Printer menu appears.
3Press the  U or  V key to select [CR Action].
4Press the  OK key.
5Press the U  or V key to select [CR Only], [LF and 
CR] or [Ignore CR].
6Press the  OK key.  Completed.  is displayed and the 
screen returns to  the Printer menu.
Paper Feed Mode
Set the default value of the paper feed direction us ed for the printer functions. The default setting is Auto.
Sys. Menu/Count.:a  b 
7  Copy
*********************
9  Send
[ Exit ]
8  Printer
Printer:
a  b 
*********************
2  EcoPrint
3  Override A4/LTR [ Exit ]
1  Emulation Set.
CR Action:
a  b 
*********************
2  LF and CR
3  Ignore CR
1 *CR Only
Item Description
Auto Sets the paper feed direction automatically.
Fixed Sets the paper feed direction the same as 
in the previous printing operation.
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-80OPERATION GUIDE
Use the procedure below to set Paper Feed Mode.
1In the Sys. Menu/Count. menu, press the 
U or  V 
key to select [Printer].
2Press the  OK key. The Printer menu appears.
3Press the  U or  V key to select [Paper Feed Mode].
4Press the  OK key. Paper Feed Mode appears.
5Press the  U or  V key to select [Auto] or [Fixed].
6Press the  OK key.  Completed.  is displayed and the 
screen returns to  the Printer menu.
Sys. Menu/Count.:a  b 
7  Copy
*********************
9  Send
[ Exit ]
8  Printer
Printer:
a  b 
*********************
2  EcoPrint
3  Override A4/LTR [ Exit ]
1  Emulation Set.
Paper Feed Mode:
a  b 
*********************
2  Fixed
1 *Auto
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
OPERATION GUIDE8-81
8
Printing Reports/Sending Notice
Print reports to check the machine settings and status. Default settings for printing the result reports can also 
be configured. 
NOTE: If user login administration is enabled, you can only print by logging in with administrator privileges.
Printing Reports
Printable reports are as follows.
Menu map
Outputs a menu map of this machine.
Status Page
Check the information including current settings, availa ble memory space, and optional equipment installed.
Status Page
Firmware Version
Menu Map
Status Page
Firmware Version
Downloaded From ManualsPrinter.com Manuals 
						

							Default Setting (System Menu) 
8-82OPERATION GUIDE
Font List
Check the font samples installed in the machine.
Use the procedure below to print a Menu Map / Status Page / Font List.
1In the Sys. Menu/Count. menu, press the 
U or  V 
key to select [Report].
2Press the  OK key. The Report menu appears.
3Press the  U or  V key to select [Report Print].
4Press the  OK key. The Report Print menu appears.
5Press the  U or  V key to select [Menu Map], [Status 
Page] or [Font List].
Sys. Menu/Count.:a  b 
*********************
2  Counter
3  System
[ Exit ]
1  Report
Report:
a  b 
*********************
2  Admin Rpt Set.
3  Result Rpt Set. [ Exit ]
1  Report Print
Report Print:
a  b 
*********************
2  Status Page
3  Font List [ Exit ]
1  Menu Map
Downloaded From ManualsPrinter.com Manuals