Hitachi F7000 Instruction Manual

							1.7    Input of Spectrophotometer Serial No. 
1 - 30 
1.7    Input of Spectrophotometer Serial No.   
 
The serial No. of the presently connected F-7000 fluorescence spectrophotometer can be displayed 
for its confirmation.   
Select the Instrument command from the Tools menu or click the 
 button.  The dialog box shown 
in Fig. 1-44 opens.    The serial No. of the connected F-7000 fluorescence spectrophotometer can be 
checked here.   
 
 
 
Fig. 1-44   
 
  
						

							1.8 
1 - 31 
1.8  Window Setting  
 
The information to be displayed upon starting the FL Solutions 2.1 program or opening the data 
processing window can be selected here by excluding unnecessary one from display.   
 
 
Fig. 1-45    Options Setting Window 
 
1 Select Options command from the 
Tools menu.   
2 The Options setting window is now 
displayed.    In this window, the 
following settings can be made.   
After your setting, click OK.  
• The set functions are validated 
when starting the monitor window 
again or opening the data 
processing window.   
 
The Options setting window has the 
following tabs.   
Display tab 
Fonts tab   
Processing tab   
Colors tab   
Startup tab 
Sensitivity Slits tab   
Analysis condition tab   
Report tab   
 
  
						

							1.8  Window Setting 
1 - 32 
1.8.1  Display Tab  
 
Items to be displayed when opening a saved data file or data immediately after measurement can be 
set here.    Those items can also be set by tool buttons or View menu after measurement.   
For the settable range of each parameter, refer to Appendix I.   
 
 
Fig. 1-46  Display Tab 
 
1 Show trace display   
Put a check mark in this box, and the trace 
cursor appears to permit spectrum tracing 
when the data processing window is open.   
2 Show gridlines with increment   
When a check mark is put in this box, the 
contents of monitor and data processing 
windows will be displayed with ruled lines.   
The width of ruled line is selectable.   
3 Wavelength scan   
Items to be displayed on the data 
processing window open in the wavelength 
scan mode can be set.   
4 Time scan   
Items to be displayed on the data 
processing window open in the time scan 
mode can be set.   
5 3-D Scan   
Items to be displayed on the data 
processing window open in the 3-D scan 
mode can be set.   
6 Intracellular cation scan   
Items to be displayed on the data 
processing window open in the intercellular 
cation scan mode can be set.   
7 Intracellular cation spectrum   
Items to be displayed on the data 
processing window open in the intercellular 
cation spectrum mode can be set.   
1 
3 
5 
7 
8 
2 
4 
6 
9  
						

							1.8.1 
1 - 33 
8 Polarization time scan   
Items to be displayed on the data 
processing window open in the polarization 
time scan mode can be set.   
9 Polarization spectrum   
Items to be displayed on the data 
processing window open in the polarization 
spectrum mode can be set.   
  
						

							1.8  Window Setting 
1 - 34 
1.8.2  Fonts Tab  
 
Display font, character size, etc. can be set.   
Printer font, character size, etc. are also settable.   
 
 
Fig. 1-47  Fonts Tab  
 
1 Display Font   
Font, character size, etc. in the 
spectrum area under display can be 
set.  
2 Printer Font   
Printer font is settable.   
3 Clicking Select presents a window as 
shown in Fig. 1-48.     
 
 
 
 
Fig. 1-48  Font Specification  
 
4 Set the desired font, style and size.     
 
1 
2 
4 
3 
						

							1.8.3 
1 - 35 
1.8.3  Processing Tab  
 
Initial parameters of data processing can be set.    For the settable range of each parameter, refer to 
Appendix I.   
 
 
Fig. 1-49  Processing Tab 
 
1 Area integration method   
An area integration method can be 
selected.  
2 Calibration  
A calibration curve formula to be used 
for the Photometry mode can be set.   
3 Peak table/Calculate peak area   
By means of a check mark, inclusion 
of the area calculation item in the 
peak table can be selected or avoided.   
4 Smooth  
The initial values of smoothing 
parameters can be set.    However, 
this setting will not be reflected on the 
parameters of Analysis Method 
window.  
5 Derivative  
With regard to derivative operation, 
the initial parameters of smoothing in 
an analysis method or to be carried 
out after measurement can be set.   
 
1 
2 
3
4 
5  
						

							1.8  Window Setting 
1 - 36 
1.8.4  Colors Tab  
 
The color of the spectrum to be overlaid is settable here.    Color 1 (bottom) is the color of the initial 
display.  
 
 
Fig. 1-50  Colors Tab  
 
1 Click Select….  
• A window as shown in Fig. 1-51 is 
presented.  
 
 
Fig. 1-51  Color Setting  
2 Select a basic color or custom color.   
3 If there is no basic color you want, click 
Define Custom Colors.  
• A window as shown in Fig. 1-52 is 
presented.  
 
1 
3 
2  
						

							1.8.4 
1 - 37 
 
 
 
Fig. 1-52    Addition of Color   
 
4 Select hue, saturation, luminance, etc. and 
click Add to Custom Colors.  
5 Your color is then added to the custom 
colors.    So select it and click OK.  
 
5 4 
						

							1.8  Window Setting 
1 - 38 
1.8.5  Startup Tab 
 
Analysis method to be taken upon start of the FL Solutions 2.1 program is settable here.   
 
 
Fig. 1-53  Startup Tab 
 
1 Restore last method used   
The method used last will be brought 
in.  
2 Auto Parameter File   
The specified method will be brought 
in.  
3 For specifying a method, click this 
button.  
• A window as shown in Fig. 1-54 is 
then presented.   
 
 
 
Fig. 1-54   
 
4 Specify a method file and click Open.  
The specified method file appears in 
Fig. 1-53.   
 
 
1 
2 
3 
4 
						

							1.8.6 
1 - 39 
1.8.6  Sensitivity Slits Tab  
 
 
Fig. 1-55    Sensitivity Slits Tab   
 Sensitivity Slits   
A slit width is settable for sensitivity 
check.  
For sensitivity check, select the 
Sensitivity Check command from the 
Utility menu.