Vodavi Starplus Dhs-l Technical Manual

							Hold4-11
Chap ter 4 - SLT Featu res an d Operation
Hol d
Flash
Des crip ti on
CO line calls and ICM calls may be placed on Hold.
Opera tion
While connected to a CO Line:
1. Pres s H ook Flas h.
2 . Af te r a 2 s ec ond del ay, di al t one is hea rd, and the pa r ty is pl ac e d on hold.
3. Hang up.
While connected to an intercom call:
1. Pres s H ook Flas h.
2 . Di al ton e i s hea rd, and t he pa rt y is pl aced on h old.
3. Hang up.
Co n dit io n s
†When an intercom/CO line call is placed on Hold and the holding pa rty hangs up,
after the Hold Reminder time is elapsed, the system will ring the hold activating
st at ion wit h i nt er nal or ex te rna l ri ng s ig nal. I f Ho ld R emi nde r is di sabl ed, 3 0 sec ond s
after the call is placed on hold, the sys te m will give the hold ing party re ca ll rin g
(inte rna l rin g for held ICM call a nd ex te rn al ring for held CO Line ca ll). Re fer toChapt er
3, Key Station Features, Operation, and Programming,and”Reminder Time”.
†If Call Abandon is set and properly functioning, calls placed on hold will be released if
the outside pa rty dis connects.
†To answer Hold Recall at an SLT, lift the handset (refer toChapter 3, Key Station
Features,Operation,andProgramming,and”Transfer”).
†Thi s f eat ur e m ay ne ed t o be adj us te d on some t el epho nes for pr ope r op er at ion.
Hot L i ne (R i ng Dow n)
Des crip ti on
This feature allows you to use the associated single line telephone (SLT) port for
automatic signaling to a predetermined destination. You can set up the Hot Line feature
to call a noth er station or sp eed dial bin num ber.
Opera tion
1. Lift the handset.
2. Dial [#] + [9] + [✳]. 
						

							4-12In t e r c o m C al l
Ch apter 4 - SLT Features an d Operation
3. Enter desired destination.
4 . Di al th e d el ay t i me (0- 9) se co nds.
(0 = imm edi at e, 1- 9 = d el ay i n s ec onds )
Canc el
1. Pres s H ook Flas h.
2. Dial [#] + [✳]+[9]+[✳].
Opera tion
1. Go of f-hook.
2 . Wai t f or the de la y t im e t o e xpi re .
In t er c om Ca l l
Des crip ti on
The S LT user ca n mak e Intercom C alls by going off- hook (intercom d ial tone ) and dialing
the I nt er c om S ta ti on Nu mber of t he d es ir ed st at ion.
Opera tion
1. Lift hands et.
2. Dial th e d esired station, Hunt Group or VM Group numbe r.
Intrusion (Privacy)
Des crip ti on
Factory de fault settings provide priva cy for all intercom and CO line calls . Th ese calls may
not be monitored or interrupted by oth er station s.
Opera tion
1. Lift hands et.
2 . Di al bus y ex te nsi on num ber.
3. Press [8].
Last Number Redial (L NR)
Des crip ti on
The La st Numb er Red ia l ( LNR) f eat ur e a utom at ical ly di al s t he la st numb er di al ed fr om
that telephone. A maximum of 16 digits can be stored in the LNR buffer for every station. 
						

							Message Waiting4-13
Chap ter 4 - SLT Featu res an d Operation
Opera tion
1. Lift hands et.
2. Dial [#] + [8].
Mess ag e Wa i t in g
Des crip ti on
The use r is abl e to sen d me ssa ges to a s tat i on and re t urn mes sage s l ef t at the ir s ta ti on by
di ali ng a fe at ure code .
Opera tion
Canc el
1. Lift the handset.
2. Dial [#] + [✳]+[9]+[6].
Cle ar Mes sage S ent
1. Lift the handset.
2. Dial [#] + [✳]+[#]+[9]+[sss].
sss = S ta t io n n u mb er ( 20 1- 27 2, 301 - 372 ) wh er e mes sa ge wa s lef t
Retrieve
1. Lift the handset.
2. Dial [#] + [9] + [6].
Sen d
1. Lift the handset.
2. Dial [ss s] + [9].
sss = S ta t io n n u mb er ( 20 1- 27 2, 301 - 372 ) wh er e mes sa ge is t o b e left
Pa ge
SLT stations can access through the use of feature codes (Internal, External, and All Call
Paging s ervice s) on theDHS-LS yst em s.
When there is a message waiting, the user will hear special Intercom Reminder tone
si gni fy ing that th ere is a message . 
						

							4-14Po rt Nu m be ri ng
Ch apter 4 - SLT Features an d Operation
External (Paging Speakers)
1. Lift the handset.
2. Dial [820 or 821].
Me et Me Answe r (Mee t Me Page)
An y use r he aring an Internal or Exte rna l Pa ge can a nswe r the Page by dialing the Me et
Me Page feature code.
Whe n a page a nnounceme nt is he ard:
1. Lift the handset.
2. Dial [#] + [5] + [9].
Stati on Gr ou p
1. Dial [4].
2. Dial Group Number (01-24).)
Sys te m All Call
1. Lift the handset.
2. Dial [425].
Ten a nt Pa gi ng ( A ll G r ou ps)
1. Lift the handset.
2. Dial [400].
Po r t Nu m b e r i n g
Des crip ti on
Ad din g SL T s ta ti o ns to theDHS- Lhas t he sig nif icant a dvan tag e of por t -gai n. When t he
SLT interfaces are installed (2-Port Analog Adapter and 2-Port SLT Expansion), the station
nu mbe ri ng and a vai la bl e s ta ti o n p o rt s are e xpan ded at a ra ti o o f 2- to - 1. 
						

							Port Nu mb er in g4-15
Chap ter 4 - SLT Featu res an d Operation
Whe n ana log ada pt er s a nd e xpans ions ar e in st all ed , t he por t numbe ri ng i s as fol lows :
2-Port Analog Adapter
Des crip ti on
A 2- Port Analog Adap te r is provided for conne ction of standard 2- wire analog telep hone
equipment to the digital network of theDHS-L. C ommon use s of th e 2-Por t Analo g
Ad apter a re voice mail, facs imile ma chine s, mode ms, and single line a nalog telep hones .
The 2-Port Ana log Ad apter is a s elf-contained , sy stem- powe re d ap paratus tha t cre ate s 2
separate analog s ta tion po rts f rom one sys tem 2B+D digital key telephone port. T he
housing accommodates the electrical components of the 2-Port Analog Adapter and the
2- Port A nal og E xpan sion . T he 2- Por t A nal og E xpans ion PCB i s e xact ly t he same PCB and
function as the 2-Port An alog Adapter PC B function . (One 2- Port Analog E xpan sion may
be add ed to th e 2 -P o r t An a lo g Ad apt er h o u s in g .)
Tabl e 4 -2: Def ault S tat i o n Di rec to ry Num bers
Card Type Slot Number
Port BDST1
AS T1DS T2
AS T2456789101112
1 B 1 X X 20 1 209 217 2 25 233 241 2 49 257 265
2 B 1 X X 20 2 210 218 2 26 234 242 2 50 258 266
3 B 1 X X 20 3 211 219 2 27 235 243 2 51 259 267
4 B 1 X X 20 4 212 220 2 28 236 244 2 52 260 268
5 B 1 X X 20 5 213 221 2 29 237 245 2 53 261 269
6 B 1 X X 20 6 214 222 2 30 238 246 2 54 262 270
7 B 1 X X 20 7 215 223 2 31 239 247 2 55 263 271
8 B 1 X X 20 8 216 224 2 32 240 248 2 56 264 272
9 B 2 X 30 1 309 317 3 25 333 341 3 49 357 365
10 B 2 X 30 2 310 318 3 26 334 342 3 50 358 366
11 B 2 X 30 3 311 319 3 27 335 343 3 51 359 367
12 B 2 X 30 4 312 320 3 28 336 344 3 52 360 368
13 B 2 X 30 5 313 321 3 29 337 345 3 53 361 369
14 B 2 X 30 6 314 322 3 30 338 346 3 54 362 370
15 B 2 X 30 7 315 323 3 31 339 347 3 55 363 371
16 B 2 X 30 8 316 324 3 32 340 348 3 56 364 372 
						

							4-16Speed D ialing (ABBR)
Ch apter 4 - SLT Features an d Operation
When used with the DTIB-8, the 2-Port Analog Adapter and 2-Port Analog Expansion
ea ch pr ovi de 2 ded ic at ed DT M F r ec e iv er s f or dec odi ng the di al ed di git s from t he
connected device. (Each analog port ha s a dedica ted D TMF receiver.) To place ca lls, the
anal og te le phone mus t prov ide D TMF tone s igna li ng wh ich i s decod ed by t he ada pt er
for call p roce ssing instructions. Twe nty -five cycle (fre quency) ringing is p rovide d by ea ch
anal og adap te r for th e a tt ache d a nal og de vi ce . Si nce e ach 2- port a dapt e r prov ide s
ded icate d DT MF rece iv ers and ringin g ge nerators , a nd b ecaus e the sy stem has a non-
blockingdigitalICMbus,thesinglelinetelephones(SLT)arenottrafficsensitiveanddo
not require special traffic balancing.
Co n dit io n s
†Any single line (2500 type) telephone equipment can be connected to the system
using the 2- Port Analog Ada pte r and 2- Port Analog E xpans ion.
†Dire ctory Numbe rs a re as sig ned to B2 ch anne ls for SLT us e at def ault.
†When 2-port analog adapter is installed, the first single line extension number from
tha t adap te r is t he same as t he di git al por t e xte nsi on n umbe r i nt o whi ch i t is
pl ugged. The sec ond anal og e xte nsi on numb er is the fi rs t num ber pl us 1 00 (e xampl e:
201 and 301, 202 and 302).
†Some mod ems ar e not compatib le wi th 2-por t ana log ada pte rs .
Sp e e d Di a l i n g (A BB R )
Spe ed Di al ing (SP D ) al lows S LT user s to st ore fr eq uent ly di al ed numbe rs . T hes e n umber s
c an e as il y be s el ec t ed by dia li ng t he Fe at ure s Ac c e ss Code pl us the B i n Num ber de si re d.
Each station can store up to 50 Station SPD Numbers in memory Bins (500-549). Each SPD
Binmaycontainuptosixteen(16)digits.
Dialing
1. Lift hands et
2. Dial SPD bin number.
In d ivid u al ( st at io n ) n u mb ers = 5 00 -5 49 , Co mmo n (sy s t em) n u mb er s = 600 - 699
Stor in g
1. Lift hands et.
2. Dial [#] + [1].
3. Dial SPD bin for programming. Station Speed Dial bins range from (500-549).
4 . Ent er t he des ir ed out si de phone numb er.
Directory Numbers are changed in system programming.
DT IB-8 ( 2 to1 ) 
						

							St a t io n L o c k4-17
Chap ter 4 - SLT Featu res an d Operation
5. Pres s H ook Flas h, a nd a confirma tion Tone is he ard.
St a t io n L o c k
Des crip ti on
The Station Lock/Unlock feature is used to prevent unauthorized outside calling from a
station tha t is unattende d. The fe ature code [# 97] is also us ed to progra m the stations
private 4-digit password.
Opera tion
To lock st ati on:
1. Lift hands et.
2. Dial [#] + [9] + [7] + [PPPP] + [#].
PPPP = current password
Pa ss word Ch an ge
1. Lift hands et.
2. Dial [#] + [9] + [7] + [PPPP] + [ppp p].
PPPP = current password
pppp = new password
Un l o c k
1. Lift hands et.
2. Dial [#] + [9] + [7] + [PPPP] + [✳].
PPPP = current password
Tr a n s f e r
Des crip ti on
Transfer a call from your statio n to another station while connected to current call.
Use of S ystem spe ed d ial n umbe rs i s ba se d on th e S LT Cl ass of S erv ice assi gnme nt. W hen
sp ee d dia lin g, eit her p riv ate s pe ed dial n umbe r or s ys te m sp ee d dial n umbe r is all owed .
Use of the Sta tion Lock featu re 97 wil l restri ct acc ess to 911. 
						

							4-18UCD Group (Hunt)
Ch apter 4 - SLT Features an d Operation
Opera tion
While on a CO Line call:
1. Pres s H ook Flas h.
2. Dial Station numbe r within 5 se conds (call will be disconne cte d a fte r 5 se con ds h ave
e la pse d i f s ta ti on n umber i s not ent er ed ).
3. Hang up to complete the transfer.
While on an intercom call:
1. Pres s H ook Flas h.
2 . Di al St at ion numbe r.
3. Hang up to complete the transfer.
Co n dit io n s
†Whe n a CO line call is transf erre d, the sys te m ring s the new station with e xternal ring
si gnal .
†Whe n tran sfe rrin g a call, the he ld in te rna l party be come s the new calling p arty and
hea rs Ring Back tone .
†CO Line Call Transfer is allowed for idle or busy transfers.
†An SLT can not trans fer a CO line call to a station that is in D ND m ode.
UCD Group (Hunt)
Stati on
Des crip ti on
Up to 24 hunt groups may be ass igne d. Each Hunt Group can conta in up to 24 mem bers.
Hunt Gr o up d ir ec t o ry numbe r s a re (4 30 -4 5 3). O ne Hunt Gro up ma y be a ssi gne d as a
VoiceMailtypeHuntGroupforsystemvoicemailintegratedoperation.
Opera tion
1. Lift hands et.
2 . Di al Hu nt gr o u p n u mbe r ( 43 0- 45 3 ). 
						

							Vo ic e M a il4-19
Chap ter 4 - SLT Featu res an d Operation
Vo i c e Ma i l
Des crip ti on
You ma y for war d ca ll s t o t he Voi ce Ma il sy st em usi ng C all F orwa rd and the Voi ce Mail
Hunt Group nu mber. Calls that you forward to Voice Ma il will b e f orwa rded to y our
mailbox. The person calling will hear your greeting and be prompted to leave a message.
Once a message is left, the Voice Mail system will light the Voice Mail button.
Opera tion
To re tr ie ve voi ce mai l mes sage s:
Pr es s [ #] + [ 6 ] + [ 4] .
Por t
Single Line Telephone ports that are to be used for connection to a Voice Mail system
must b e a ssigned type VM to p rov ide longer D TMF tones. This id entif ies the port to the
sys te m s oftw are fo r s pe cial ha ndling.
Defa ul t
DHS-LS in gle Line Te le phone ports a re se t to N (N O), not as signed as a VM port. 
						

							4-20Vo ic e M ai l
Ch apter 4 - SLT Features an d Operation