Home
>
Panasonic
>
Communications System
>
Panasonic Digital Business System 576 Technical Manual Section 400 Programming
Panasonic Digital Business System 576 Technical Manual Section 400 Programming
Have a look at the manual Panasonic Digital Business System 576 Technical Manual Section 400 Programming online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Section 400-ProgrammingIndex 576-13-400 DBS 576 (USA) issued 05/20/98 l Index-15 FF1System FF2Tr u n k s FF3Extensions FF4FF-/Soft Keys FF5Groups FF6TRS/ARS 0 System Configuration FF7Appl ications FF8Maintenance Introduction Appe ndix A Appe ndix B FF1System FF2Tr u n k s FF3Extensions FF4FF-/Soft Keys FF5Groups FF6TRS/ARS 0 System Configuration FF7Appli cations FF8Maintenance Introduction Appe ndix A Appe ndix B Index Interdigit Timers .................................... 1-141, 1-142 Link Control (DTMF) .......... 2-20 , 2-48, 2-99, 2-127 Offhook Signal Interval ..................................... 1-144 On-Hook Detection Timer..................................... 3-6 Pre-Pause Timers ................................... 1-139 , 1-140 Redial (feature code) ............................. 1-155 , 1-157 Transfer Recall Start Timer ............................... 1-147 Voice Mail Connection ....................................... 3-11 SMDR-- Call Duration Timer, enabling on trunk .. 2-19 , 2-105 data to serial port ................................................. 1-88 inbound calls on analog CO trunks ..................... 2-22 inbound calls on analog E&M tie-trunks ............ 2-49 inbound calls on ISDN trunks ............................. 2-66 inbound calls on T1 E&M tie-trunks................. 2-129 inbound calls on T1-CO trunks ......................... 2-101 outbound calls on analog CO trunks ................... 2-22 outbound calls on analog E&M tie-trunks .......... 2-49 outbound calls on ISDN trunks ........................... 2-66 outbound calls on T1 E&M tie-trunks............... 2-128 outbound calls on T1-CO trunks ....................... 2-100 Output Format ..................................................... 1-93 Soft Keys-- feature code assignment to .................................. 4-19 features at busy tone ............................................ 8-12 features at idle/dial tone ........................................ 8-9 features at ringback ............................................. 8-11 features at talk ..................................................... 8-13 in Programming Mode................................... Intro-16 Special Days-- during each Month............................................... 8-60 Holidays............................................................... 8-55 Holidays (Extended) ............................................ 8-59 Weekdays ............................................................ 8-53 Weekend A ....................................................... 8-54 Weekend B ....................................................... 8-54 Special Days (ARS) ................................................ 6-26 Splash Tone-- for 3-Party Conference ........................................ 1-11 for Busy Override/Continuous ............................ 1-10 for Busy Override/Start ....................................... 1-10 for internal paging ................................................. 1-9 for voice calls ........................................................ 1-9 S-Point-- ISDN, extension settings ..................................... 3-28 SSD-- Allowed Range (TRS) ......................................... 6-24 assignment (allowing) ......................................... 1-43 assignment (feature code for) ................ 1-155 , 1-157 assignment to MCO Tenant Grps (allowing) ...... 1-44 auto-pause position (behind PBX) ...................... 1-91block assignment to MCO Tenant Groups .......... 1-99 blocks (defining) ............................................... 1-100 code numbering ................................................... 1-22 common block for MCO Tenant Groups .......... 1-100 delay-ring to (on analog CO trunks) ..........2-31 –2-33 delay-ring to (on ISDN trunks) ..................2-78 –2-80 delay-ring to (on T1 CO trunks).............2-110 –2-112 dialing (allowing) ................................................ 1-45 dialing (feature code for) ........................1-155 , 1-157 DIL to (on analog CO trunks) ....................2-28 –2-30 DIL to (on ISDN trunks) ............................2-75 –2-77 DIL to (on T1 CO trunks) ......................2-107 –2-109 grouping .............................................................. 1-23 Hot Line destination ............................................ 5-23 Index .................................................................... 8-48 Names .................................................................. 8-47 Numbers .............................................................. 8-46 TRS Override on ................................................. 6-23 trunk access for ................................................... 1-23 Station Call Park-- Code .......................................................1-157 , 1-159 Code, Answer .........................................1-157 , 1-159 Code, Transfer ........................................1-157 , 1-159 Recall Timer ...................................................... 1-153 Step Calling-- DISA/Tie Line ..................................................... 1-26 intercom calls ...................................................... 1-26 Stop Bits -- see Data Format Sub-Address Type (ISDN trunks) ........................... 2-73 Subscriber Numbers (on ISDN trunks) ................... 2-84 Sync Loss Alarms-- Counter ................................................................ 8-27 Synchronized Clock .............................................. 1-103 System Clock-- setting .................................................................. 8-42 time display ......................................................... 1-21 System Common settings .......................................... 1-9 System CPC Modes .............................................Intro-8 System Initialization ............................................Intro-4 System Programming-- preparations ......................................................Intro-3
IndexSection 400-Programming Index-16 l DBS 576 (USA) issued 05/20/98 576-13-400 FF1System FF2Tr u n k s FF3Extensions FF4FF-/Soft Keys FF5Groups FF6TRS/ARS 0 System Configuration FF7Appl ications FF8Maintenance Introduction Appe ndix A Appe ndix B FF1System FF2Tr u n k s FF3Extensions FF4FF-/Soft Keys FF5Groups FF6TRS/ARS 0 System Configuration FF7Appli cations FF8Maintenance Introduction Appe ndix A Appe ndix B Index System Size (no. of cabinets) .................................... 0-5 System Timers....................................................... 1-115 T T1-- BPV Alarm Counter ............................................ 8-29 CRC Alarm Counter............................................ 8-29 Error Info view/clear ........................................... 8-25 Layer 1 Receive Error Counter ........................... 8-30 Layer 1 Status Error Counter .............................. 8-30 Layer 1 Transmit Error Counter .......................... 8-31 Layer 2 TEI Error Counter .................................. 8-31 Loopback 1 Diagnostics ...................................... 8-34 Loopback 2 Diagnostics ...................................... 8-34 OOF Alarm Counter............................................ 8-26 Signal Loss Alarm Counter ................................. 8-26 Slip Alarm Counter ............................................. 8-28 Sync Loss Alarm Counter ................................... 8-27 Trunk (E&M Tie) settings................................. 2-116 Trunks (CO) settings ........................................... 2-86 Yellow Alarm Counter ........................................ 8-27 Talkback-- Digital Pad settings for Paging Port Adapter .... 1-182 Tandem-- Ring Type, for analog E&M trunks ...........2-53 –2-55 Ring Type, for T1 E&M trunks..............2-132 –2-134 Tandem Exchange-- Digits ................................................................... 6-45 Follow Digits ....................................................... 6-46 Routing ................................................................ 6-46 Routing Entry ...................................................... 6-47 TEI-- Layer 2 Error Counter ......................................... 8-31 Tenant Groups-- assignment to analog CO trunk ........................... 2-34 assignment to analog E&M trunk ....................... 2-56 assignment to API ports ...................................... 7-14 assignment to Built-In ACD port ........................ 7-10 assignment to Built-In VM VPU ports.................. 7-5 assignment to extension ......... 3-24 , 3-36, 3-43, 3-45 assignment to ISDN trunk (B-channel) ............... 2-81 assignment to T1 CO trunk ............................... 2-113 assignment to T1 E&M trunk............................ 2-135 MCO -- see MCO Tenant Groups Tie Lines-- Analog E&M Trunk settings ............................... 2-37 answering pages on ............................................. 1-29 Call Duration Timer for outbound calls ............ 1-118dial tone to............................................................1-76 MOH source for ...................................................1-97 paging on..............................................................1-78 Paging Timer for ................................................1-135 step calling on ......................................................1-26 Tie Incoming (ring type) .... 2-53 –2-55, 2-132–2-134 Wink Wait Timer, outbound (analog) calls .......1-121 Time (displaying current) ........................................1-21 Time List Tables ......................................................6-27 Timed Reminder-- Interval for Busy Extensions..............................1-152 Ring Timer .........................................................1-151 set/clear, feature codes (defining) .......... 1-156 , 1-158 Timers-- Attendant Reversion Duration ...........................1-148 Auto Answer ............................................ 2-45 , 2-125 BLF Delayed Ring .............................................1-144 Call Duration......................................................1-118 Call Forward/DND Confirmation Tone .............1-138 Call Forward/No Answer ....................... 1-149 , 1-150 Callback Ring.....................................................1-150 CO Busy Tone Detect ........................................1-123 CO Busy Tone Detect Start................................1-122 Delayed Ring ............................. 1-129 , 1-130, 1-131 Delayed Ringing for Att.Hunt Grp .............. 5-5 –5-10 Delayed Ringing for Ext.Hunt Grps ....................5-15 DID Delayed Ring .............................................1-137 DID Ring Detect ........................................ 2-10 , 2-89 Disconnect Supervision ....... 2-15 , 2-44, 2-95, 2-124 DTMF ON/OFF Patterns 1-123 , 1-124, 1-125, 1-126 DTMF Receiver Queuing ..................................1-143 Flash, for Auto-Repeat Dial ...............................1-117 Flash, for trunk line................................ 1-115 , 1-116 Guard, for outbound calls .......................... 2-15 , 2-96 Hold Recall Start .................................... 1-145 , 1-146 Hold/Transfer Recall Duration ..........................1-148 Hookflash (SLT) ....................................................3-7 Howler Tone Duration .......................................1-153 Inbound Ground Detect.............................. 2-16 , 2-96 Interdigit..................................... 1-120 , 1-141, 1-142 Long Talk Alarm.................................... 1-134 , 1-135 Message-Waiting Tone ......................................1-138 No-Answer for DISA calls.................................1-127 No-Answer for multiple-incoming calls ............1-128 On-Hook Detection (SLT) .....................................3-6 Outpulse Delay...................................................1-119 Paging, for Tie-Lines .........................................1-135 Pause ..................................................................1-117 Pre-Pause.................................... 1-120 , 1-139, 1-140 Queuing, for ARS outgoing calls .......................1-136 Queuing, for Att.Hunt Grp ........................... 5-5 –5-11 Queuing, for Ext.Hunt Grps .................................5-16
Section 400-ProgrammingIndex 576-13-400 DBS 576 (USA) issued 05/20/98 l Index-17 FF1System FF2Tr u n k s FF3Extensions FF4FF-/Soft Keys FF5Groups FF6TRS/ARS 0 System Configuration FF7Appl ications FF8Maintenance Introduction Appe ndix A Appe ndix B FF1System FF2Tr u n k s FF3Extensions FF4FF-/Soft Keys FF5Groups FF6TRS/ARS 0 System Configuration FF7Appli cations FF8Maintenance Introduction Appe ndix A Appe ndix B Index Recall, destination ............................................... 1-67 Ring Detect (analog E&M trunks) ...................... 2-39 Ring Detect (T1 E&M trunks)........................... 2-118 Slide Ring/Alarm Ring .......................... 1-132 –1-133 SLT Offhook Signal Interval............................. 1-144 Station Call Park Recall .................................... 1-153 Timed Reminder Interval (to busy ext.) ............ 1-152 Timed Reminder Ring ....................................... 1-151 Transfer Recall Start.......................................... 1-147 Trunk-to-Trunk Connection .............................. 1-136 Wink Wait ......................................................... 1-121 Tone-- Busy -- see Busy Tone Call Forward/DND confirmation, timer for ...... 1-138 Dial -- see Dial Tone fast-busy, forced recovery at ............................... 1-77 Howler, duration timer for................................. 1-153 Howler, enabling ................................................. 1-29 Message-Waiting, timer for............................... 1-138 MOH source ..................................... 1-96 , 1-97, 1-98 Progress ............................................................... 3-35 Ringback -- see Ringback Tone ringing, for incoming calls .................................. 1-75 Sidetone -- see Sidetone Traffic -- see Call Traffic Traffic Measurement Data to Serial Port ................ 1-89 Transfer-- Call Park .............................................................. 1-72 Code #1 for VM ................................................ 1-109 Code #2 for VM ................................................ 1-110 Onhook Trunk-to-Trunk...................................... 1-70 Recall Duration Timer ....................................... 1-148 Recall Start Timers ............................................ 1-147 Station Call Park, code for .................... 1-157 , 1-159 Trigger Codes .......................................................... 8-37 Trouble Records-- Dump All ............................................................. 8-22 TRS-- Allowed SSD Range............................................ 6-24 Analyze Digit Follow Digits ............................... 6-12 Analyze Digit Prefix ID ...................................... 6-10 Analyze Digit Prefix String ................................. 6-11 Analyze Digit Routing......................................... 6-13 Analyze Digit Routing Entry............................... 6-14 Analyze Digit TRS Level .................................... 6-12 ARS Routing ....................................................... 6-18 assignments for DISA ID Codes ....................... 1-114 Class for analog CO trunk ......................... 2-34 –2-35 Class for analog E&M trunk ............................... 2-57 Class for API port ................................................ 7-15 Class for Built-In ACD port ................................ 7-10Class for Built-In VM VPU port ........................... 7-5 Class for extension ........................... 3-25 , 3-37–3-38 Class for Forced Acct Codes ............................. 1-104 Class for ISDN trunk ..................................2-81 –2-82 Class for T1 CO trunk ............................2-113 –2-114 Class for T1 E&M trunk ................................... 2-136 Class for Verified Account Codes....................... 8-50 Dialing Restrictions ............................................. 6-21 Leading Digit Follow Digits ................................. 6-7 Leading Digit Prefix ID ........................................ 6-6 Leading Digit Prefix String ................................... 6-6 Leading Digit Routing........................................... 6-9 Leading Digit Routing Entry ................................. 6-9 Leading Digit TRS Level ...................................... 6-8 Level for Closed Number .................................... 6-43 Non-ARS Routing ............................................... 6-15 TRS/ARS-- Common settings ................................................... 6-5 Trunk Card-- LS/GS, using for ground-start ............................... 0-3 removing from a Free Slot .................................... 0-3 Trunk COS-- assignment to analog CO trunk ........................... 2-35 assignment to analog E&M trunk ....................... 2-58 assignment to ISDN trunk ................................... 2-82 assignment to T1 CO trunk ............................... 2-114 assignment to T1 E&M trunk............................ 2-137 Dial Tone to Tie Line .......................................... 1-76 DID/DNIS Table for (choosing) ......................... 1-77 DISA ID Verification .......................................... 1-79 Forced Recovery at Fast-Busy ............................ 1-77 Incoming Ring Tone ........................................... 1-75 Paging on DISA/Tie-Line Call............................ 1-78 Trunk FF-Key-- Exclusive Hold on ............................................... 1-11 operation, for Brokers Hold ................................ 3-16 operation, for direct calls..................................... 3-14 operation, for HOLD ........................................... 3-15 operation, for multiple call pickup ...................... 3-15 settings for .............................. 4-10 –4-13, 4-15–4-18 Trunk Groups-- assignment to ARS Route ................................... 6-36 Trunks-- access for SSD/PSDs........................................... 1-23 Analog (CO) settings............................................. 2-7 Analog (E&M) settings ....................................... 2-37 answer, feature code (defining) ..............1-156 , 1-158 Caller ID .............................................................. 2-12 Caller ID Ringing/Display .................................. 2-21 Chains (trunk groups), defining ........................ 1-165 circuit type (analog E&M) .................................. 2-38
IndexSection 400-Programming Index-18 l DBS 576 (USA) issued 05/20/98 576-13-400 FF1System FF2Tr u n k s FF3Extensions FF4FF-/Soft Keys FF5Groups FF6TRS/ARS 0 System Configuration FF7Appl ications FF8Maintenance Introduction Appe ndix A Appe ndix B FF1System FF2Tr u n k s FF3Extensions FF4FF-/Soft Keys FF5Groups FF6TRS/ARS 0 System Configuration FF7Appli cations FF8Maintenance Introduction Appe ndix A Appe ndix B Index Circuit Type (T1 CO) .......................................... 2-87 Circuit Type (T1 E&M) .................................... 2-117 CO, MOH source for ........................................... 1-96 Connection Type (CO/Network) ..............2-86 , 2-116 Connection Type (CO/PBX) . 2-19 , 2-47, 2-65, 2-98, 2-127 Connection Type (Pt-to-MultiPt) ........................ 2-61 COS settings ........................................................ 1-75 direct access (allowing) ....................................... 1-46 direct access (feature code) ....................1-156 , 1-158 ISDN settings ...................................................... 2-59 Name ................................................................... 8-19 numbering (digit length) ..................................... 1-22 numbering, for analog (E&M) ............................ 2-37 numbering, for analog CO..................................... 2-7 numbering, for ISDN .......................................... 2-60 numbering, for T1 (CO) ...................................... 2-87 numbering, for T1 (E&M)) ............................... 2-116 PBX access codes ................................................ 1-92 print inbound call traffic...................................... 8-18 print outbound call traffic.................................... 8-17 queuing (allowing) .............................................. 1-60 restricting calls between trunks (COS) ............... 1-95 Ring Interval for abandoned calls ....................... 2-17 Signal Type (analog CO) ...................................... 2-8 T1 (CO) settings .................................................. 2-86 T1 (E&M Tie) settings ...................................... 2-116 Timers (#1) ........................................................ 1-115 Timers (#2) ........................................................ 1-127 Trunk-to-Trunk Connection-- Timer ................................................................. 1-136 Trunk-to-Trunk Transfer (Onhook) ........................ 1-70 U Unanswered Calls -- see No-Answer User Maintenance-- Log-In Code (allowing)....................................... 1-53 settings (FF8 - 1) ................................................. 8-42 V Variable Mode-- Release on extensions ......................................... 3-20 soft keys during ................................................... 4-19 Verification-- of Card type ......................................................... 8-23 of Card version .................................................... 8-24Verified Account Codes-- assigning TRS Class to ........................................8-50 creating.................................................................8-50 on extensions........................................................3-22 Virtual Extensions-- FF-key LED control .............................................1-12 floating hold on FF-keys ......................................1-14 settings (FF3 - 2) ..................................................3-40 Voice Calls-- feature code (defining) ........................... 1-159 , 1-160 receiving (allowing) .............................................1-64 sending (allowing) ...............................................1-63 setting extensions for ...........................................1-36 splash tone for ........................................................1-9 Voice Mail-- Answer Supervision Code..................................1-109 Built-In -- see Built-In Voice Mail Call-Forward ID Code (creating) .........................8-51 feature codes (defining) ......................... 1-157 , 1-158 PanaVOICE and API Card.....................................0-3 Priority Msg-Waiting Send (allowing) ................1-54 SLT connection ....................................................3-11 Transfer Code #1................................................1-109 Transfer Code #2................................................1-110 W Walking TRS-- access code (defining) ............................ 1-157 , 1-159 Codes, creating.....................................................8-61 Weekdays.................................................................8-53 Weekend A ...........................................................8-54 Weekend B ...........................................................8-54 Wink-- Wait Timer .........................................................1-121 Wink Start-- trunk circuit type (analog E&M)..........................2-38 trunk circuit type (T1 E&M) ..............................2-117 Y Yellow Alarms-- Counter.................................................................8-27