Home > Panasonic > Communications System > Panasonic Digital Business System 576 Technical Manual Section 400 Programming

Panasonic Digital Business System 576 Technical Manual Section 400 Programming

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Digital Business System 576 Technical Manual Section 400 Programming online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 664
    Add page 101 to Favourites
    image text
    Enable zoom 
    							Section 400-Programming FF1: System Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 1-39
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
         
Notes:
Onhook Transfer at Camp-On:  Put call on hold, dial the extension to transfer to (extension is busy), 
dial the Camp-On code, then hang up.  When the extension becomes free, the call will be automatically 
transferred.
If 
Onhook Transfer is disabled, the user must press PROG or RELEASE before hanging up, in order to 
transfer the call.
An SLT requires 
Onhook Transfer to be enabled (set to “0”).
Related Programming:
Extension COS: Manual Camp-On Send (pg. 1-57)     FF1 0 03 (00-15) 28 Hold (0 or 1) Hold
Extension COS: Onhook Trunk-to-Trunk Transfer (pg. 1-70)     FF1 0 03 (00-15) 45 Hold (0 or 1) Hold
Extension COS:  Onhook Transfer at Camp-On
(all CPCs) - Version 1.0 or higher
Allow/Restrict the ability of extensions in this Class of Service (COS) to
perform Onhook Transfer by a camp-on to the called party.
FF1   0   03   (00-15)   04   Hold   (0 or 1)   Hold 
0=Allow Onhook Transfer at camp-on.
 
    Extension COS Nos. 1-16
    00=COS 1          08=COS 9
    01=COS 2          09=COS 10
    02=COS 3          10=COS 11
    03=COS 4          11=COS 12
    04=COS 5          12=COS 13
    05=COS 6          13=COS 14
    06=COS 7          14=COS 15 (for VM)
    07=COS 8          15=COS 16 (for Attendant)
1=Do not allow Onhook Transfer at camp-on.
   
  
       (default)



 	
))#)	.3 6 #
    Add page 102 to Favourites
    image text
    Enable zoom 
    							FF1: System Programming Section 400-Programming
Page 1-40
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
        
Notes:
System Hold:  Any extension can retrieve the held call.
Exclusive Hold:  Only the extension that placed the call on hold, can retrieve it.
This address applies only to non-appearing CO trunk calls (not on an FF-key).  For Exclusive Hold 
control on a trunk FF-key, see 
Exclusive Hold (CO Key)  FF1 0 01 0006 Hold (0 or 1) Hold.
Related Programming:
Extension COS:  Exclusive Hold for Non-
Appearing CO
(all CPCs) - Version 1.0 or higher
Set call holding type when the HOLD key is pressed during a non-appearing
CO trunk call, on digital keyphone extensions in this Class of Service (COS).
FF1   0   03   (00-15)   05   Hold   (0 or 1)   Hold
 
0=System Hold.  (default)
 
    Extension COS Nos. 1-16
    00=COS 1          08=COS 9
    01=COS 2          09=COS 10
    02=COS 3          10=COS 11
    03=COS 4          11=COS 12
    04=COS 5          12=COS 13
    05=COS 6          13=COS 14
    06=COS 7          14=COS 15 (for VM) 
-- default:  1 (Exclusive Hold)
    07=COS 8          15=COS 16 (for Attendant)   1=Exclusive Hold.




 	
)).!, %6	3%5
    Add page 103 to Favourites
    image text
    Enable zoom 
    							Section 400-Programming FF1: System Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 1-41
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
          
Notes:
System Hold:  Any extension can retrieve the held call (LED flashes green on other phones with that 
line appearance).
Exclusive Hold:  Only the extension that placed the call on hold, can retrieve it (LED solid red on other 
phones).
Related Programming:
Extension COS: Hookflash Control on SLTs (pg. 1-43)     FF1 0 03 (00-15) 08 Hold (0 or 1) Hold
Extension COS:  Exclusive Hold on SLTs
(all CPCs) - Version 1.0 or higher
Set call holding type when a hookflash (to place a call on hold)
is performed on SLT extensions in this Class of Service (COS).
FF1   0   03   (00-15)   06   Hold   (0 or 1)   Hold 
0=System Hold.  (default)
 
    
Extension COS Nos. 1-16
    00=COS 1          08=COS 9
    01=COS 2          09=COS 10
    02=COS 3          10=COS 11
    03=COS 4          11=COS 12
    04=COS 5          12=COS 13
    05=COS 6          13=COS 14
    06=COS 7          14=COS 15 (for VM) 
-- default:  1  (Exclusive Hold)
    07=COS 8          15=COS 16 (for Attendant)
   1=Exclusive Hold.



 	
)).!, %6 5%
    Add page 104 to Favourites
    image text
    Enable zoom 
    							FF1: System Programming Section 400-Programming
Page 1-42
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
        
Notes:
3-Party Conference:  First hookflash places call on hold.  Then call the 3rd party, and hookflash again 
to connect all three parties.
(all CPCs - Version 1.3 and higher)   To drop out of a 3-Party Conference, simply hang up.  To release 
Conference Member #1, press PROG 1.  To release Conference Member #2, press PROG 2.
Brokers Hold:  Hookflash toggles between two calls, automatically placing the current call on hold and 
connecting to the other.
Related Programming:
Extension COS: Hookflash Control on SLTs (pg. 1-43)     FF1 0 03 (00-15) 08 Hold (0 or 1) Hold
SLT Hookflash (pg. 3-5)     FF3 0 BSSC 03 0 Hold (0 or 1) Hold
Extension COS:  Brokers Hold on SLTs
(all CPCs) - Version 1.0 or higher
Set call holding type when a second hookflash is performed
on SLT extensions in this Class of Service (COS).
FF1   0   03   (00-15)   07   Hold   (0 or 1)   Hold 
0=3-Party Conference.
 
    Extension COS Nos. 1-16
    00=COS 1          08=COS 9
    01=COS 2          09=COS 10
    02=COS 3          10=COS 11
    03=COS 4          11=COS 12
    04=COS 5          12=COS 13
    05=COS 6          13=COS 14
    06=COS 7          14=COS 15 (for VM)
    07=COS 8          15=COS 16 (for Attendant)
   1=Brokers Hold.  (default)



% 	))7!4? .!,
    Add page 105 to Favourites
    image text
    Enable zoom 
    							Section 400-Programming FF1: System Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 1-43
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
      
Notes:
Related Programming:
          
Extension COS:  Hookflash Control on SLTs
(all CPCs) - Version 1.0 or higher
Allow/Restrict hookflash on SLT extensions in this Class of Service (COS).
FF1   0   03   (00-15)   08   Hold   (0 or 1)   Hold
 
0=Allowed (system recognizes hookflash).
 
    Extension COS Nos. 1-16
    00=COS 1          08=COS 9
    01=COS 2          09=COS 10
    02=COS 3          10=COS 11
    03=COS 4          11=COS 12
    04=COS 5          12=COS 13
    05=COS 6          13=COS 14
    06=COS 7          14=COS 15 (for VM)
    07=COS 8          15=COS 16 (for Attendant)
1=Restricted (system ignores hookflash).    (default)



 	
))5% .!!4

Extension COS:  SSD Assignment
(all CPCs) - Version 1.0 or higher
Allow/Restrict the ability of extensions in this Class of Service (COS) to
assign System Speed Dial (SSD) numbers.
FF1   0   03   (00-15)   09   Hold   (0 or 1)   Hold 
0=Allow SSD assignment.
 
    Extension COS Nos. 1-16
    00=COS 1          08=COS 9
    01=COS 2          09=COS 10
    02=COS 3          10=COS 11
    03=COS 4          11=COS 12
    04=COS 5          12=COS 13
    05=COS 6          13=COS 14
    06=COS 7          14=COS 15 (for VM)
    07=COS 8          15=COS 16 (for Attendant) 
-- default:  0  (Allow)
   1=Do not allow SSD assignment.  (default)



& 	)) /
    Add page 106 to Favourites
    image text
    Enable zoom 
    							FF1: System Programming Section 400-Programming
Page 1-44
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
SSD Numbers (pg. 8-46)     FF8 1 02 Hold 0 Hold Hold (SSD) Hold FLASH (Phone No.) Hold
        
Notes:
Related Programming:
SSD Assignment to Groups (pg. 1-23)     FF1 0 02 0003 Hold (0 or 1) Hold
SSD Block Assignment to MCO Tenant Groups (pg. 1-99)     FF1 0 15 (0001-0072) Hold (0-72) Hold
Extension COS:  SSD Assignment to MCO 
Tenant Groups
(all CPCs) - Version 1.0 or higher
Allow/Restrict the ability of extensions in this Class of Service (COS) to
assign System Speed Dial numbers to MCO Tenant Groups.
FF1   0   03   (00-15)   10   Hold   (0 or 1)   Hold
 
0=Allow SSD assignment to MCO Tenant Groups.
 
    
Extension COS Nos. 1-16
    00=COS 1          08=COS 9
    01=COS 2          09=COS 10
    02=COS 3          10=COS 11
    03=COS 4          11=COS 12
    04=COS 5          12=COS 13
    05=COS 6          13=COS 14
    06=COS 7          14=COS 15 (for VM)
    07=COS 8          15=COS 16 (for Attendant) 
-- default:  0  (Allow)   
1=Do not allow SSD assignment to MCO  
    Tenant Groups.  (default)



 	))1@ /
    Add page 107 to Favourites
    image text
    Enable zoom 
    							Section 400-Programming FF1: System Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 1-45
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
        
Notes:
Related Programming:
SSD Block Assignment to MCO Tenant Groups (pg. 1-99)     FF1 0 15 (0001-0072) Hold (0-72) Hold
SSD Common Block for MCO Tenant Groups (pg. 1-100)     FF1 0 16 0001 Hold (0-800) Hold
SSD Block Assignment (pg. 1-100)     FF1 0 17 (0001-0144) Hold (0-799 or 0-800) Hold
Extension COS:  SSD Dialing
(all CPCs) - Version 1.0 or higher
Allow/Restrict the ability of extensions in this Class of Service (COS) to
dial System Speed Dial numbers.
FF1   0   03   (00-15)   11   Hold   (0 or 1)   Hold 
0=Allow SSD dialing.  (default)
 
    Extension COS Nos. 1-16
    00=COS 1          08=COS 9
    01=COS 2          09=COS 10
    02=COS 3          10=COS 11
    03=COS 4          11=COS 12
    04=COS 5          12=COS 13
    05=COS 6          13=COS 14
    06=COS 7          14=COS 15 (for VM)
    07=COS 8          15=COS 16 (for Attendant)
   1=Do not allow SSD dialing.


 	
)) %
    Add page 108 to Favourites
    image text
    Enable zoom 
    							FF1: System Programming Section 400-Programming
Page 1-46
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
      
Notes:
Related Programming:
        
Extension COS:  Intercom Redialing
(all CPCs) - Version 1.0 or higher
Allow/Restrict the ability of extensions in this Class of Service (COS) to
redial intercom calls.
FF1   0   03   (00-15)   12   Hold   (0 or 1)   Hold 
0=Allow intercom and trunk redialing.
 
    Extension COS Nos. 1-16
    00=COS 1          08=COS 9
    01=COS 2          09=COS 10
    02=COS 3          10=COS 11
    03=COS 4          11=COS 12
    04=COS 5          12=COS 13
    05=COS 6          13=COS 14
    06=COS 7          14=COS 15 (for VM)
    07=COS 8          15=COS 16 (for Attendant)    1=Do not allow intercom redialing.  (default)


 	))  , %6

    Only outside trunk calls can be redialed.
Extension COS:  Direct Trunk Access
(all CPCs) - Version 1.0 or higher
Allow/Restrict the ability of extensions in this Class of Service (COS) to
select a specific trunk for an outgoing call.
FF1   0   03   (00-15)   13   Hold   (0 or 1)   Hold 
0=Allow direct trunk access.  (default)
 
    Extension COS Nos. 1-16
    00=COS 1          08=COS 9
    01=COS 2          09=COS 10
    02=COS 3          10=COS 11
    03=COS 4          11=COS 12
    04=COS 5          12=COS 13
    05=COS 6          13=COS 14
    06=COS 7          14=COS 15 (for VM)
    07=COS 8          15=COS 16 (for Attendant)   1=Do not allow direct trunk access --
    must use MCO trunk group.


 	
)) #
    Add page 109 to Favourites
    image text
    Enable zoom 
    							Section 400-Programming FF1: System Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 1-47
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
If this Direct Trunk Access is set to “1” (Do not allow), use the MCO Outgoing Group (press the MCO 
key) to seize a trunk.
Related Programming:
Tenant Group MCO Access: Outbound Trunk Groups (pg. 1-164)     FF1 3 01 (0001-0360) Hold (0-99 or 0-72) 
Hold
        
Notes:
Related Programming:
MCO-Inbound Trunk Group Members (pg. 5-20)     FF5 3 (01-99) (001-576) Hold (1-576) Hold
Extension COS:  MCO Incoming Call Answer
(all CPCs) - Version 1.0 or higher
Allow/Restrict the ability to pick up incoming calls in MCO (Incoming) trunk groups
that are ringing on other extensions besides those in this Class of Service (COS).
FF1   0   03   (00-15)   14   Hold   (0 or 1)   Hold 
0=Allow call pickup in other
 
    
Extension COS Nos. 1-16
    00=COS 1          08=COS 9
    01=COS 2          09=COS 10
    02=COS 3          10=COS 11
    03=COS 4          11=COS 12
    04=COS 5          12=COS 13
    05=COS 6          13=COS 14
    06=COS 7          14=COS 15 (for VM)
    07=COS 8          15=COS 16 (for Attendant)
   
    
       MCO trunk groups.  (default)
1=Do not allow call pickup in
    other MCO trunk groups.


 	
))* 2# /)
    Add page 110 to Favourites
    image text
    Enable zoom 
    							FF1: System Programming Section 400-Programming
Page 1-48
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
        
Notes:
(all CPCs - Version 1.3 and higher)   Phones set to DND will 
not hear pages.  However, phones set to Call 
Forward-All 
will hear pages.
Related Programming:
Splash Tone: Internal Paging (pg. 1-9)     FF1 0 01 0002 Hold (0 or 1) Hold
Page Override (pg. 1-28)     FF1 0 02 0012 Hold (0 or 1) Hold
Trunk COS: Paging on DISA/Tie-Line Call (pg. 1-78)     FF1 0 04 (00-15) 05 Hold (0 or 1) Hold
FF5 4: Paging Groups (pg. 5-21)
        
Extension COS:  Paging
(all CPCs) - Version 1.0 or higher
Allow/Restrict the ability of extensions in this Class of Service (COS) to issue a page.
FF1   0   03   (00-15)   15   Hold   (0 or 1)   Hold
 
0=Allow paging.  (default)
 
    
Extension COS Nos. 1-16
    00=COS 1          08=COS 9
    01=COS 2          09=COS 10
    02=COS 3          10=COS 11
    03=COS 4          11=COS 12
    04=COS 5          12=COS 13
    05=COS 6          13=COS 14
    06=COS 7          14=COS 15 (for VM)
    07=COS 8          15=COS 16 (for Attendant)
   1=Do not allow paging.



 	
))$

Extension COS:  Auto Repeat Dial
(all CPCs) - Version 1.0 or higher
Allow/Restrict Auto Repeat Dialing on digital extensions in this Class of Service (COS).
FF1   0   03   (00-15)   16   Hold   (0 or 1)   Hold
 
0=Allow Auto Repeat Dialing.  (default)
 
    
Extension COS Nos. 1-16
    00=COS 1          08=COS 9
    01=COS 2          09=COS 10
    02=COS 3          10=COS 11
    03=COS 4          11=COS 12
    04=COS 5          12=COS 13
    05=COS 6          13=COS 14
    06=COS 7          14=COS 15 (for VM)
    07=COS 8          15=COS 16 (for Attendant)
   1=Do not allow Auto Repeat Dialing.


 	
))/-! *$ ,
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Digital Business System 576 Technical Manual Section 400 Programming