Home
>
Panasonic
>
Communications System
>
Panasonic Digital Business System 576 Technical Manual Section 400 Programming
Panasonic Digital Business System 576 Technical Manual Section 400 Programming
Have a look at the manual Panasonic Digital Business System 576 Technical Manual Section 400 Programming online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Section 400-Programming FF1: System Programming
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 1-59
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Callback Request: (also called “Station Queuing”) Dial a busy extension. Before hanging up, dial the
Callback Request code (“3” by default). When the called extension becomes idle, your phone will start
ringing. When you pick up, the system will automatically ring the called extension. When they pick up,
you’ll be connected to them.
If the other extension’s Callback Request Receive (see address below) is set for “Do not allow,” this
extension’s Callback Request Send setting has no meaning for call attempts to that extension.
Related Programming:
Extension COS: Callback Request Receive (pg. 1-59) FF1 0 03 (00-15) 31 Hold (0 or 1) Hold
Callback Ring Timer (Callback Request and Trunk Queuing) (pg. 1-150) FF1 1 04 0011 Hold (0-255) Hold
Notes:
Related Programming:
Extension COS: Callback Request Send (pg. 1-58) FF1 0 03 (00-15) 30 Hold (0 or 1) Hold
Extension COS: Callback Request Receive
(all CPCs) - Version 1.0 or higher
Allow/Restrict the ability of extensions in this Class of Service (COS) to
receive Callback Requests from other extensions.
FF1 0 03 (00-15) 31 Hold (0 or 1) Hold
0=Allow Callback Request Receive. (default)
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
07=COS 8 15=COS 16 (for Attendant)1=Do not allow Callback Request Receive.
)),, 74
FF1: System Programming Section 400-Programming
Page 1-60
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Trunk Queuing: Dial a trunk access code to seize a trunk. If you hear busy tone instead, dial the Trunk
Queuing code and hang up. Your phone will issue an alert tone when the trunk becomes available. Pick
up the handset to accept it (you’ll hear CO dial tone in the receiver).
If the
ARS/LCR Setting for the system is disabled, Trunk Queuing for MCO-1 is available.
Related Programming:
ARS/LCR Setting (pg. 1-27) FF1 0 02 0010 Hold (0 or 1) Hold
Extension COS: Direct Trunk Access (pg. 1-46) FF1 0 03 (00-15) 13 Hold (0 or 1) Hold
1. Extension COS: Trunk Queuing
(all CPCs) - Version 1.0 or higher
Allow/Restrict the ability of extensions in this Class of Service (COS) to
use the Trunk Queuing feature.
FF1 0 03 (00-15) 32 Hold (0 or 1) Hold
0=Allow Trunk Queuing. (default)
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
07=COS 8 15=COS 16 (for Attendant)1=Do not allow Trunk Queuing.
))%3 D--
Section 400-Programming FF1: System Programming
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 1-61
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
Extension COS: Forced DND Override (pg. 1-61) FF1 0 03 (00-15) 34 Hold (0 or 1) Hold
Extension COS: Manual DND Override Send
(all CPCs) - Version 1.0 or higher
Allow/Restrict the ability of extensions in this Class of Service (COS) to
manually override a Do-Not-Disturb (DND) setting on another extension.
FF1 0 03 (00-15) 33 Hold (0 or 1) Hold
0=Allow manual DND Override Send.
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
07=COS 8 15=COS 16 (for Attendant)
-- default: 0 (Allow)1=Do not allow manual DND Override Send.
(default)
)) ) #(
Extension COS: Forced DND Override
(all CPCs) - Version 1.0 or higher
Allow/Restrict the ability of extensions in this Class of Service (COS) to
automatically override Do-Not-Disturb (DND) settings on other extensions.
FF1 0 03 (00-15) 34 Hold (0 or 1) Hold
0=Allow automatic DND override on other
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
07=COS 8 15=COS 16 (for Attendant) extensions.
1=Do not allow automatic DND override on
other extensions. (default)
)) ) ,,
FF1: System Programming Section 400-Programming
Page 1-62
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
Extension COS: Manual DND Override Send (pg. 1-61) FF1 0 03 (00-15) 33 Hold (0 or 1) Hold
Notes:
Related Programming:
Extension COS: 8-Party Conference
(all CPCs) - Version 1.0 or higher
Allow/Restrict the ability of extensions in this Class of Service (COS) to
make an 8-party conference call.
FF1 0 03 (00-15) 35 Hold (0 or 1) Hold
0=Allow 8-Party Conference. (default)
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
07=COS 8 15=COS 16 (for Attendant)1=Do not allow 8-Party Conference.
)) $ #)
Section 400-Programming FF1: System Programming
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 1-63
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
This address does not apply if
Extension COS: Intercom Calling Type is set to “Tone calling”
(default).
If
Extension COS: Intercom Calling Type is set to “Voice calling,” but the above address is set to “Do
not allow Voice Intercom Calling,” the extension will automatically send intercom calls by Tone.
Related Programming:
Splash Tone: Voice Calls (pg. 1-9) FF1 0 01 0001 Hold (0 or 1) Hold
Extension COS: Intercom Calling Type (pg. 1-36) FF1 0 03 (00-15) 01 Hold (0 or 1) Hold
Extension COS: Voice Call Send
(all CPCs) - Version 1.0 or higher
Allow/Restrict the ability of extensions in this Class of Service (COS) to
place voice intercom calls to other extensions.
FF1 0 03 (00-15) 36 Hold (0 or 1) Hold
0=Allow Voice Intercom Calling. (default)
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
07=COS 8 15=COS 16 (for Attendant)1=Do not allow Voice Intercom Calling.
))&! ,,
FF1: System Programming Section 400-Programming
Page 1-64
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
Splash Tone: Voice Calls (pg. 1-9) FF1 0 01 0001 Hold (0 or 1) Hold
Extension COS: Intercom Calling Type (pg. 1-36) FF1 0 03 (00-15) 01 Hold (0 or 1) Hold
Extension COS: Voice Call Receive
(all CPCs) - Version 1.0 or higher
Allow/Restrict the ability of extensions in this Class of Service (COS) to
receive voice intercom calls from other extensions.
FF1 0 03 (00-15) 37 Hold (0 or 1) Hold
0=Allow Voice Intercom Call Receive. (default)
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
-- default: 1 (Do not allow)
07=COS 8 15=COS 16 (for Attendant)1=Do not allow Voice Intercom Call Receive.
%
))&! ,,
Extension COS: Dial Tone Stop
(all CPCs) - Version 1.0 or higher
Set whether extensions in this Class of Service (COS) will receive internal dial tone
at handset off-hook.
FF1 0 03 (00-15) 38 Hold (0 or 1) Hold
1=Receive internal
dial tone at off-hook.
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
07=COS 8 15=COS 16 (for Attendant)
0=No tone at off-hook.
)) % !6
(default)
Section 400-Programming FF1: System Programming
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 1-65
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
Notes:
Related Programming:
Pre-Pause Timer at Internal Dial Tone (DP SLTs) (pg. 1-139) FF1 1 03 0003 Hold (0-255) Hold
Pre-Pause Timer at Internal Dial Tone (DTMF SLTs) (pg. 1-140) FF1 1 03 0004 Hold (0-255) Hold
Pre-Pause Timer at Internal Dial Tone (Digital Keyphones) (pg. 1-140) FF1 1 03 0005 Hold (0-255) Hold
Extension COS: Dial Tone Pre-Pause Check
(all CPCs) - Version 1.0 or higher
Set whether extensions in this Class of Service (COS) will be subject to a
timeout between off-hook/dial tone and the first dialed digit.
FF1 0 03 (00-15) 39 Hold (0 or 1) Hold
1=Check. System will send a re-order tone
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
-- default: 0 (No Check)
07=COS 8 15=COS 16 (for Attendant)
-- default: 0 (No Check)
if the Pre-Pause Timer elapses before the
0=No Check. System will give dial tone
indefinitely.
first dialed digit. (default)
& )) % $ $-
FF1: System Programming Section 400-Programming
Page 1-66
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
Long Talk Alarm #1 Timer (pg. 1-134) FF1 1 02 0010 Hold (0-255) Hold
Long Talk Alarm #2 Timer (pg. 1-135) FF1 1 02 0011 Hold (0-255) Hold
Extension COS: Long Talk Alarm
(all CPCs) - Version 1.0 or higher
Set whether extensions in this Class of Service (COS) will hear an alarm tone in
the handset receiver after an outbound call exceeds the
Long Talk Alarm Timer.
FF1 0 03 (00-15) 40 Hold (0 or 1) Hold
0=Disable Long Talk Alarm. (default)
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
07=COS 8 15=COS 16 (for Attendant)1=Enable Long Talk Alarm.
))5!%,4 /52
Section 400-Programming FF1: System Programming
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 1-67
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
Hold Recall Start Timer (Extensions) (pg. 1-145) FF1 1 04 0001 Hold (0-255) Hold
Hold Recall Start Timer (Attendant Group) (pg. 1-145) FF1 1 04 0002 Hold (0-255) Hold
Hold Recall Start Timer (SLTs) (pg. 1-146) FF1 1 04 0003 Hold (0-255) Hold
Transfer Recall Start Timer (Extensions/SLTs) (pg. 1-147) FF1 1 04 0004 Hold (0-255) Hold
Transfer Recall Start Timer (Attendant Group) (pg. 1-147) FF1 1 04 0005 Hold (0-255) Hold
Extension COS: Recall Timer Apply
(all CPCs) - Version 1.0 or higher
Set which Recall Timer will be used for extensions in this Class of Service (COS).
FF1 0 03 (00-15) 41 Hold (0 or 1) Hold
0=Use Extension Recall Timer. (default)
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
07=COS 8 15=COS 16 (for Attendant)
-- default: 1 (Attendant Recall Timer)1=Use Attendant Recall Timer.
)),, %
FF1: System Programming Section 400-Programming
Page 1-68
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
If this is set to “1” (Enable Forced ARS), the extension can only dial the MCO-1 access code (“9” by
default) to obtain an outside line; all other MCO access codes will be blocked.
Related Programming:
ARS/LCR Setting (pg. 1-27) FF1 0 02 0010 Hold (0 or 1) Hold
FF6 0: TRS/ARS Common (pg. 6-5)
FF6 1: TRS Class Definitions (pg. 6-15)
FF6 2: ARS Settings (pg. 6-25)
Extension COS: Forced ARS
(all CPCs) - Version 1.0 or higher
Set whether Automatic Route Selection (ARS) will be forced for extensions in
this Class of Service (COS).
FF1 0 03 (00-15) 42 Hold (0 or 1) Hold
0=Disable Forced ARS. (default)
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
07=COS 8 15=COS 16 (for Attendant)1=Enable Forced ARS.
))! /