Panasonic Digital Business System 576 Technical Manual Section 400 Programming

							Section 400-Programming Introduction to DBS 576 Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Intro-31
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance
Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF2 0 BSSC 02 10 Hold (0 or 1) Hold SMDR for Inbound Calls 0 (Exclude) 2-49
FF2 0 BSSC 02 11 Hold (0 or 1) Hold Flash Key Operation 0 (flash to CO) 2-50
FF2 0 BSSC 02 12 Hold
FF2 0 BSSC 02 13 Hold
FF2 0 BSSC 02 14 HoldNot Used -- 2-51
FF2 0 BSSC 02 15 Hold (0 or 1) Hold DTMF Conversion (Outbound Calls) 1 (Enabled) 2-51
FF2 0 BSSC 02 16 Hold (0 or 1) Hold DTMF Conversion (Inbound Calls) 1 (Enabled) 2-52
FF2 0 BSSC 02 17 Hold (0 or 1) Hold Indirect LCR 0 (Disabled) 2-52
FF2 0 BSSC 02 18 Hold
FF2 0 BSSC 02 19 Hold
FF2 0 BSSC 02 20 HoldNot Used -- 2-53
FF2 0 BSSC 03 0 Hold (0 or 1) Hold Day1 Ring Type 0 (Tie incoming) 2-53
FF2 0 BSSC 03 1 Hold Not Used -- 2-54
FF2 0 BSSC 03 2 Hold (0 or 1) Hold Day2 Ring Type 0 (Tie incoming) 2-54
FF2 0 BSSC 03 3 Hold Not Used -- 2-54
FF2 0 BSSC 03 4 Hold (0 or 1) Hold Night Ring Type 0 (Tie incoming) 2-55
FF2 0 BSSC 03 5 Hold Not Used -- 2-55
FF2 0 BSSC 04 0 Hold
FF2 0 BSSC 04 1 Hold
FF2 0 BSSC 04 2 Hold
FF2 0 BSSC 04 3 Hold
FF2 0 BSSC 04 4 Hold
FF2 0 BSSC 04 5 HoldNot Used -- 2-56
FF2 0 BSSC 05 Hold (0-72) Hold Tenant Group Assignment 0 (none) 2-56
FF2 0 BSSC 06 0 Hold (1-50) Hold TRS Class Assignment (Day) 1 2-57
FF2 0 BSSC 06 1 Hold (1-50) Hold TRS Class Assignment (Night) 1 2-57
FF2 0 BSSC 07 Hold (1-16) Hold Trunk COS Assignment 1 2-58
FF2 0 BSSC 08 Hold (1-16) Hold Trunk Digital Pad Class Assignment 8 2-58
FF2 1: ISDN Trunks2-59
FF2 1 BSSC 00 0 Hold (BSSC) Hold D-Channel Position -- 2-59
FF2 1 BSSC 00 1 Hold (1-127) Hold D-Channel Interface ID Code -- 2-59
FF2 1 BSSC 01 Hold (0-576) Hold Trunk Number Assignment (1st Channel) -- 2-60
FF2 1 BSSC 02 00 Hold (0 or 1) Hold Trunk Connection Type (Pt-to-Pt/MultiPt) 0 (Point-to-Point) 2-61
FF2 1 BSSC 02 01 Hold (0-6) Hold Ring Frequency 1 (400/562Hz) 2-62
FF2 1 BSSC 02 02 Hold (0-12) Hold Ring Pattern 1 (1on/3off) 2-63
FF2 1 BSSC 02 03 Hold (0-2) Hold DTMF On/Off Pattern During Talk 1 (Pattern #2) 2-64
FF2 1 BSSC 02 04 Hold
FF2 1 BSSC 02 05 HoldNot Used -- 2-64
FF2 1 BSSC 03 00 Hold (0 or 1) Hold Trunk Connection Type (CO/PBX) 0 (CO) 2-65
FF2 1 BSSC 03 01 Hold (0 or 1) Hold Auto-Repeat Dial 1 (Allowed) 2-65
FF2 1 BSSC 03 02 Hold (0 or 1) Hold SMDR for Outbound Calls 1 (Include) 2-66
FF2 1 BSSC 03 03 Hold (0 or 1) Hold SMDR for Inbound Calls 0 (Exclude) 2-66
FF2 1 BSSC 03 04 Hold (0 or 1) Hold Flash Key Operation 0 (talk disconnct/
keep trunk)2-67
FF2 1 BSSC 03 05 Hold (0 or 1) Hold Long Talk Alarm 0 (Disabled) 2-68
FF2 1 BSSC 03 06 Hold (0 or 1) Hold Alarm Ringing 0 (Disabled) 2-68
FF2 1 BSSC 03 07 Hold (0 or 1) Hold Slide Ringing 0 (Disabled) 2-69
FF2 1 BSSC 03 08 Hold (0 or 1) Hold Indirect LCR 0 (Disabled) 2-70
FF2 1 BSSC 03 09 Hold (0 or 1) Hold B-Channel Select 0 (Highest-no.’d 
channel)2-70
FF2 1 BSSC 03 10 Hold (0 or 1) Hold B-Channel Numbering (Layer 3) 0 (Slot mapping) 2-71 
						

							Introduction to DBS 576 Programming Section 400-Programming
Intro-32
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance
Introduction
Appe ndix A
Appe ndix BFF2 1 BSSC 03 11 Hold (0 or 1) Hold Call ID Length 0 (1 byte/BRI)
1 (2 bytes/PRI)2-72
FF2 1 BSSC 03 12 Hold (0 or 1) Hold Calling Number Send 1 (Enabled) 2-72
FF2 1 BSSC 03 13 Hold (0 or 1) Hold Sub-Address Type 0 (IA5) 2-73
FF2 1 BSSC 03 14 Hold
FF2 1 BSSC 03 15 Hold
FF2 1 BSSC 03 16 Hold
FF2 1 BSSC 03 17 Hold
FF2 1 BSSC 03 18 Hold
FF2 1 BSSC 03 19 Hold
FF2 1 BSSC 03 20 HoldNot Used -- 2-74
FF2 1 BSSC 04 0 Hold (0-6) Hold Day1 Ring Type 0 (multi-incomg.) 2-75
FF2 1 BSSC 04 1 Hold (0-9999) Hold Day1 Ring Destination -- 2-75
FF2 1 BSSC 04 2 Hold (0-6) Hold Day2 Ring Type 0 (multi-incomg.) 2-76
FF2 1 BSSC 04 3 Hold (0-9999) Hold Day2 Ring Destination -- 2-76
FF2 1 BSSC 04 4 Hold (0-6) Hold Night Ring Type 0 (multi-incomg.) 2-77
FF2 1 BSSC 04 5 Hold (0-9999) Hold Night Ring Destination -- 2-77
FF2 1 BSSC 05 0 Hold (0-4) Hold Day1 Delayed Ring Type 0 (Disabled) 2-78
FF2 1 BSSC 05 1 Hold (0-9999) Hold Day1 Delayed Ring Destination -- 2-78
FF2 1 BSSC 05 2 Hold (0-4) Hold Day2 Delayed Ring Type 0 (Disabled) 2-79
FF2 1 BSSC 05 3 Hold (0-9999) Hold Day2 Delayed Ring Destination -- 2-79
FF2 1 BSSC 05 4 Hold (0-4) Hold Night Delayed Ring Type 0 (Disabled) 2-80
FF2 1 BSSC 05 5 Hold (0-9999) Hold Night Delayed Ring Destination -- 2-80
FF2 1 BSSC 06 (00-23) Hold (0-72) Hold Tenant Group Assignment (B-Channel) 0 (none) 2-81
FF2 1 BSSC 07 0 Hold (1-50) Hold TRS Class Assignment (Day) 1 2-81
FF2 1 BSSC 07 1 Hold (1-50) Hold TRS Class Assignment (Night) 1 2-82
FF2 1 BSSC 08 Hold (1-16) Hold Trunk COS Assignment 1 2-82
FF2 1 BSSC 09 0 Hold (up to 6 digits) Hold Calling Number Area Code -- 2-83
FF2 1 BSSC 09 1 Hold (up to 6 digits) Hold Calling Number Office Code -- 2-84
FF2 1 BSSC 09 2 Hold (up to 4 digits) Hold Calling Number Subscriber Number -- 2-84
FF2 1 BSSC 10 Hold (1-16) Hold Trunk Digital Pad Class Assignment 7 2-85
FF2 2: T1 Trunks (CO)2-86
FF2 2 BSSCC 00 Hold (0-2) Hold Trunk Connection Type (CO/Network) 1 (CO) 2-86
FF2 2 BSSCC 01 Hold (0-576) Hold Trunk Number Assignment -- 2-87
FF2 2 BSSCC 02 00 Hold (0-3) Hold Trunk Signal Type 3 (DID-Wink) 2-87
FF2 2 BSSCC 02 01 Hold (0 or 1) Hold Disconnect Detect 0 (Disabled) 2-88
FF2 2 BSSCC 02 02 Hold (0 or 1) Hold Dial Pulse Minimum Pause 0 (625ms) 2-88
FF2 2 BSSCC 02 03 Hold (0 or 1) Hold Ground Start Ring Type 0 (CO signal) 2-89
FF2 2 BSSCC 02 04 Hold (0 or 1) Hold DID Ring Detect Timer 0 (32ms) 2-89
FF2 2 BSSCC 02 05 Hold  Not Used --  2-90
FF2 2 BSSCC 02 06 Hold (0 or 1) Hold Frame Format 0 (SF) 2-90
FF2 2 BSSCC 02 07 Hold (0 or 1) Hold Line Coding 0 (AMI) 2-91
FF2 2 BSSCC 02 08 Hold (0-6) Hold Ring Frequency 1 (400/562Hz) 2-92
FF2 2 BSSCC 02 09 Hold (0-12) Hold Ring Pattern 1 (1on/3off) 2-93
FF2 2 BSSCC 02 10 Hold (0-2) Hold DTMF On/Off Pattern During Talk 1 (Pattern #2) 2-94
FF2 2 BSSCC 02 11 Hold (0-2) Hold DTMF On/Off Pattern for Outgoing Dialing 0 (Pattern #1) 2-94
FF2 2 BSSCC 02 12 Hold (0-3) Hold Disconnect Supervision Timer
LS/GS: 0 (281ms)DID: 0 (96ms)2-95
FF2 2 BSSCC 02 13 Hold (0-3) Hold Guard Timer for Outbound Calls 0 (500ms) 2-96
FF2 2 BSSCC 02 14 Hold (0-3) Hold Inbound Ground Detect Timer 0 (1 second) 2-96 
						

							Section 400-Programming Introduction to DBS 576 Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Intro-33
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance
Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF2 2 BSSCC 02 15 Hold Not Used --  2-97
FF2 2 BSSCC 03 00 Hold (0 or 1) Hold DTMF/Dial Pulse Dialing 1 (DTMF) 2-97
FF2 2 BSSCC 03 01 Hold (0 or 1) Hold Flash Pattern 0 (Pattern #1) 2-97
FF2 2 BSSCC 03 02 Hold (0 or 1) Hold Dial Tone Detection 1 (Enabled) 2-98
FF2 2 BSSCC 03 03 Hold (0 or 1) Hold Trunk Connection Type (CO/PBX) 0 (CO) 2-98
FF2 2 BSSCC 03 04 Hold (0 or 1) Hold Auto-Repeat Dial 1 (Allowed) 2-99
FF2 2 BSSCC 03 05 Hold (0 or 1) Hold DTMF After Answer (Link Control) 0 (Allowed) 2-99
FF2 2 BSSCC 03 06 Hold (0 or 1) Hold CO Dial Tone Simulation 0 (Disabled) 2-100
FF2 2 BSSCC 03 07 Hold (0 or 1) Hold SMDR for Outbound Calls 1 (Include) 2-100
FF2 2 BSSCC 03 08 Hold (0 or 1) Hold SMDR for Inbound Calls 0 (Exclude) 2-101
FF2 2 BSSCC 03 09 Hold (0 or 1) Hold Flash Key Operation 0 (flash to CO) 2-101
FF2 2 BSSCC 03 10 Hold (0 or 1) Hold Long Talk Alarm 0 (Disabled) 2-102
FF2 2 BSSCC 03 11 Hold (0 or 1) Hold Alarm Ringing 0 (Disabled) 2-102
FF2 2 BSSCC 03 12 Hold (0 or 1) Hold Slide Ringing 0 (Disabled) 2-103
FF2 2 BSSCC 03 13 Hold (0 or 1) Hold DTMF Conversion (Outbound Calls) 1 (Enabled) 2-104
FF2 2 BSSCC 03 14 Hold (0 or 1) Hold DTMF Conversion (Inbound Calls) 1 (Enabled) 2-104
FF2 2 BSSCC 03 15 Hold (0 or 1) Hold Indirect LCR 0 (Disabled) 2-105
FF2 2 BSSCC 03 16 Hold (0 or 1) Hold Call Duration 1 (System timer) 2-105
FF2 2 BSSCC 03 17 Hold
FF2 2 BSSCC 03 18 HoldNot Used -- 2-106
FF2 2 BSSCC 04 0 Hold (0-6) Hold Day1 Ring Type 0 (multi-incomg.) 2-107
FF2 2 BSSCC 04 1 Hold (0-9999) Hold Day1 Ring Destination -- 2-107
FF2 2 BSSCC 04 2 Hold (0-6) Hold Day2 Ring Type 0 (multi-incomg.) 2-108
FF2 2 BSSCC 04 3 Hold (0-9999) Hold Day2 Ring Destination -- 2-108
FF2 2 BSSCC 04 4 Hold (0-6) Hold Night Ring Type 0 (multi-incomg.) 2-109
FF2 2 BSSCC 04 5 Hold (0-9999) Hold Night Ring Destination -- 2-109
FF2 2 BSSCC 05 0 Hold (0-4) Hold Day1 Delayed Ring Type 0 (Disabled) 2-110
FF2 2 BSSCC 05 1 Hold (0-9999) Hold Day1 Delayed Ring Destination -- 2-110
FF2 2 BSSCC 05 2 Hold (0-4) Hold  Day2 Delayed Ring Type 0 (Disabled) 2-111
FF2 2 BSSCC 05 3 Hold (0-9999) Hold Day2 Delayed Ring Destination -- 2-111
FF2 2 BSSCC 05 4 Hold (0-4) Hold Night Delayed Ring Type 0 (Disabled) 2-112
FF2 2 BSSCC 05 5 Hold (0-9999) Hold Night Delayed Ring Destination --  2-112
FF2 2 BSSCC 06 Hold (1-72) Hold Tenant Group Assignment -- 2-113
FF2 2 BSSCC 07 0 Hold (1-50) Hold TRS Class Assignment (Day) 1 2-113
FF2 2 BSSCC 07 1 Hold (1-50) Hold TRS Class Assignment (Night) 1 2-114
FF2 2 BSSCC 08 Hold (1-16) Hold Trunk COS Assignment 1 2-114
FF2 2 BSSCC 09 Hold (1-16) Hold Trunk Digital Pad Class Assignment 7 2-115
FF2 2: T1 Trunks (E&M Tie)2-116
FF2 2 BSSCC 00 Hold (1-2) Hold Trunk Connection Type (CO/Network) 1 (CO) 2-116
FF2 2 BSSCC 01 Hold (0-576) Hold Trunk Number Assignment -- 2-116
FF2 2 BSSCC 02 00 Hold (0-5) Hold Trunk Signal Type 5 (E&M Wink) 2-117
FF2 2 BSSCC 02 01 Hold
FF2 2 BSSCC 02 02 Hold
FF2 2 BSSCC 02 03 HoldNot Used -- 2-118
FF2 2 BSSCC 02 04 Hold (0 or 1) Hold Ring Detect Timer 0 (48ms) 2-118
FF2 2 BSSCC 02 05 Hold (0 or 1) Hold Auto Answer for Outbound Calls 0 (Disabled) 2-119
FF2 2 BSSCC 02 06 Hold (0 or 1) Hold Frame Format 0 (SF) 2-119
FF2 2 BSSCC 02 07 Hold (0 or 1) Hold Line Coding 0 (AMI) 2-120
FF2 2 BSSCC 02 08 Hold (0-6) Hold Ring Frequency 1 (400/562Hz) 2-121 
						

							Introduction to DBS 576 Programming Section 400-Programming
Intro-34
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance
Introduction
Appe ndix A
Appe ndix BFF2 2 BSSCC 02 09 Hold (0-12) Hold Ring Pattern 1 (1on/3off) 2-122
FF2 2 BSSCC 02 10 Hold (0-2) Hold DTMF On/Off Pattern During Talk 1 (Pattern #2) 2-123
FF2 2 BSSCC 02 11 Hold (0-2) Hold DTMF On/Off Pattern for Outgoing Dialing 0 (Pattern #1) 2-123
FF2 2 BSSCC 02 12 Hold (0-3) Hold Disconnect Supervision Timer 0 (160ms) 2-124
FF2 2 BSSCC 02 13 Hold
FF2 2 BSSCC 02 14 HoldNot Used -- 2-124
FF2 2 BSSCC 02 15 Hold (0-3) Hold Auto Answer Timer 0 (1 second) 2-125
FF2 2 BSSCC 03 00 Hold (0 or 1) Hold DTMF/Dial Pulse Dialing 1 (DTMF) 2-125
FF2 2 BSSCC 03 01 Hold (0 or 1) Hold Flash Pattern 0 (Pattern #1) 2-126
FF2 2 BSSCC 03 02 Hold Not Used --  2-126
FF2 2 BSSCC 03 03 Hold (0 or 1) Hold Trunk Connection Type (CO/PBX) 0 (CO) 2-127
FF2 2 BSSCC 03 04 Hold Not Used -- 2-127
FF2 2 BSSCC 03 05 Hold (0 or 1) Hold DTMF After Answer (Link Control) 0 (Allowed) 2-127
FF2 2 BSSCC 03 06 Hold (0 or 1) Hold CO Dial Tone Simulation 0 (Disabled) 2-128
FF2 2 BSSCC 03 07 Hold (0 or 1) Hold SMDR for Outbound Calls 1 (Include) 2-128
FF2 2 BSSCC 03 08 Hold (0 or 1) Hold SMDR for Inbound Calls 0 (Exclude) 2-129
FF2 2 BSSCC 03 09 Hold (0 or 1) Hold Flash Key Operation 0 (flash to CO) 2-129
FF2 2 BSSCC 03 10 Hold
FF2 2 BSSCC 03 11 Hold
FF2 2 BSSCC 03 12 HoldNot Used -- 2-130
FF2 2 BSSCC 03 13 Hold (0 or 1) Hold DTMF Conversion (Outbound Calls) 1 (Enabled) 2-130
FF2 2 BSSCC 03 14 Hold (0 or 1) Hold DTMF Conversion (Inbound Calls) 1 (Enabled) 2-131
FF2 2 BSSCC 03 15 Hold (0 or 1) Hold Indirect LCR 0 (Disabled) 2-131
FF2 2 BSSCC 03 16 Hold
FF2 2 BSSCC 03 17 Hold
FF2 2 BSSCC 03 18 HoldNot Used -- 2-132
FF2 2 BSSCC 04 0 Hold (0 or 1) Hold Day1 Ring Type 0 (Tie incoming) 2-132
FF2 2 BSSCC 04 1 Hold Not Used --  2-133
FF2 2 BSSCC 04 2 Hold (0 or 1) Hold Day2 Ring Type 0 (Tie incoming) 2-133
FF2 2 BSSCC 04 3 Hold Not Used --  2-132
FF2 2 BSSCC 04 4 Hold (0 or 1) Hold Night Ring Type 0 (Tie incoming) 2-134
FF2 2 BSSCC 04 5 Hold Not Used --  2-134
FF2 2 BSSCC 05 0 Hold
FF2 2 BSSCC 05 1 Hold
FF2 2 BSSCC 05 2 Hold
FF2 2 BSSCC 05 3 Hold
FF2 2 BSSCC 05 4 Hold
FF2 2 BSSCC 05 5 HoldNot Used -- 2-135
FF2 2 BSSCC 06 Hold (0-72) Hold Tenant Group Assignment 0 (none) 2-135
FF2 2 BSSCC 07 0 Hold (1-50) Hold TRS Class Assignment (Day) 1 2-136
FF2 2 BSSCC 07 1 Hold (1-50) Hold TRS Class Assignment (Night) 1 2-136
FF2 2 BSSCC 08 Hold (1-16) Hold Trunk COS Assignment 1 2-137
FF2 2 BSSCC 09 Hold (1-16) Hold Trunk Digital Pad Class Assignment 7 2-137 
						

							Section 400-Programming Introduction to DBS 576 Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Intro-35
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance
Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Defaults for FF3: EXTENSIONS      
FF Key Address Topic Default Page
FF3 0: Digital Keyphones and SLTs3-3
FF3 0 BSSC 00 Hold (1-3) Hold Phone Type 1 (Dig.keyphone or 
SLT)3-3
FF3 0 BSSC 01 Hold (1-5) Hold Phone Version (Digital Keyphones) Auto detected 3-4
FF3 0 BSSC 02 Hold (0-9999) Hold Extension Number Assignment -- 3-4
FF3 0 BSSC 03 0 Hold (0 or 1) Hold SLT Hookflash 0 (Detect) 3-5
FF3 0 BSSC 03 1 Hold (0 or 1) Hold SLT Dial Type 1 (DTMF) 3-6
FF3 0 BSSC 03 2 Hold (0-3) Hold SLT On-Hook Detection Timer 1 (1008ms detect; 
112ms ignore)3-6
FF3 0 BSSC 03 3 Hold (0-3) Hold SLT Hookflash Timer 2 (208ms) 3-7
FF3 0 BSSC 03 4 Hold Not Used -- 3-7
FF3 0 BSSC 04 00 Hold (0 or 1) Hold Auto Answer (Handset) 1 (Enabled) 3-8
FF3 0 BSSC 04 01 Hold (0 or 1) Hold Ringing Line Preference (ON/OFF) 0 (Disabled) 3-8
FF3 0 BSSC 04 02 Hold (0 or 1) Hold Slide Ringing Receive 0 (Disabled) 3-9
FF3 0 BSSC 04 03 Hold (0 or 1) Hold Busy Override on Trunk Key 0 (Disabled) 3-9
FF3 0 BSSC 04 04 Hold (0 or 1) Hold Auto Camp-On Receive 0 (Disabled) 3-10
FF3 0 BSSC 04 05 Hold (0 or 1) Hold CO Off-Hook Signal 1 (Enabled) 3-10
FF3 0 BSSC 04 06 Hold (0 or 1) Hold SLT Voice Mail Connection 0 (Not VM port) 3-11
FF3 0 BSSC 04 07 Hold (0 or 1) Hold SLT Fixed Ring Pattern 0 (Different) 3-12
FF3 0 BSSC 04 08 Hold (0 or 1) Hold End-to-End Signaling 1 (Enabled) 3-12
FF3 0 BSSC 04 09 Hold (0 or 1) Hold Message Waiting LED 1 (Enabled) 3-13
FF3 0 BSSC 04 10 Hold (0 or 1) Hold Data Security 0 (Allow interrupt) 3-13
FF3 0 BSSC 04 11 Hold (0 or 1) Hold Large-LCD Fixed Menu Display During Idle 1 (Allowed) 3-14
FF3 0 BSSC 04 12 Hold (0 or 1) Hold Trunk Key Operation: Direct Calls 1 (Ignored) 3-14
FF3 0 BSSC 04 13 Hold (0 or 1) Hold Trunk Key Operation: HOLD 0 (Ignored) 3-15
FF3 0 BSSC 04 14 Hold (0 or 1) Hold Trunk Key Operation: Multiple Call Pickup 0 (Retrieved) 3-15
FF3 0 BSSC 04 15 Hold (0 or 1) Hold Trunk Key Operation: Brokers Hold 0 (Disabled) 3-16
FF3 0 BSSC 04 16 Hold (0 or 1) Hold System Mode Display 0 (Disabled) 3-17
FF3 0 BSSC 04 17 Hold (0 or 1) Hold Flash on PROG (Recall) 0 (Ignored) 3-17
FF3 0 BSSC 04 18 Hold (0 or 1) Hold Call Duration Display 0 (Enabled) 3-18
FF3 0 BSSC 04 19 Hold (0 or 1) Hold Ring Volume Control 1 (Separate) 3-18
FF3 0 BSSC 04 20 Hold (0 or 1) Hold Loop (AEC) Disconnect Signal for VM 0 (No signal) 3-19
FF3 0 BSSC 04 21 Hold (0 or 1) Hold Flash-Signal Control 0 (Flash to CO) 3-19
FF3 0 BSSC 04 22 Hold (0 or 1) Hold Variable Mode Release 0 (Release) 3-20
FF3 0 BSSC 04 23 Hold (0 or 1) Hold MCO Prime Line 0 (Disabled) 3-21
FF3 0 BSSC 04 24 Hold (0 or 1) Hold Forced Account Codes 0 (Not Forced) 3-21
FF3 0 BSSC 04 25 Hold (0 or 1) Hold Verified Account Codes 0 (Unverified) 3-22
FF3 0 BSSC 04 26 Hold Not Used - 3-23
FF3 0 BSSC 04 27 Hold (0 or 1) Hold Hot Dial Pad 1 (Enabled) 3-23
FF3 0 BSSC 05 Hold (1-72) Hold Tenant Group Assignment 1 3-24
FF3 0 BSSC 06 0 Hold (1-50) Hold TRS Class Assignment (Day) 1 3-25
FF3 0 BSSC 06 1 Hold (1-50) Hold TRS Class Assignment (Night) 1 3-25
FF3 0 BSSC 07 Hold (1-16) Hold Extension COS Assignment 1 3-26
FF3 0 BSSC 08 Hold (1-8) Hold Extension Digital Pad Class Assignment 1 (Analog)
3 (Digital)3-26
FF3 0 BSSC 09 Hold (1 or 2) Hold Dial Plan Assignment 1 (Plan “A”) 3-27 
						

							Introduction to DBS 576 Programming Section 400-Programming
Intro-36
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance
Introduction
Appe ndix A
Appe ndix BFF3 1: S-Point ISDN Extensions3-28
FF3 1 BSSC 00 0 Hold (BSSC) Hold Common D-Channel Position -- 3-28
FF3 1 BSSC 00 1 Hold (1-127) Hold D-Channel Interface ID Code -- 3-29
FF3 1 BSSC 01 Hold (0-9999) Hold Extension Number Assignment -- 3-29
FF3 1 BSSC 02 00 Hold (0 or 1) Hold Connection Type 0 (Point-to-Point) 3-30
FF3 1 BSSC 02 01 Hold (0 or 1) Hold Passive Bus 0 (Short Loop) 3-30
FF3 1 BSSC 02 02 Hold (0 or 1) Hold Layer 1 Operate Mode 0 (Active) 3-31
FF3 1 BSSC 02 03 Hold Not Used -- 3-31
FF3 1 BSSC 03 00 Hold (0 or 1) Hold B-Channel Select 0 (Highest-no.’d) 3-32
FF3 1 BSSC 03 01 Hold (0 or 1) Hold B-Channel Numbering (Layer 3) 0 (Slot mapping) 3-32
FF3 1 BSSC 03 02 Hold (0 or 1) Hold Call ID Length 0 (1byte/BRI)
1 (2byte/PRI)3-33
FF3 1 BSSC 03 03 Hold (0 or 1) Hold Called Number Indication 0 (no indication) 3-34
FF3 1 BSSC 03 04 Hold (0 or 1) Hold Called Sub-Address Indication 0 (no indication) 3-34
FF3 1 BSSC 03 05 Hold Not Used -- 3-35
FF3 1 BSSC 03 06 Hold (0 or 1) Hold Progress Tone 1 (Send) 3-35
FF3 1 BSSC 03 07 Hold (0 or 1) Hold Data Security 0 (Off) 3-36
FF3 1 BSSC 04 Hold (1-72) Hold Tenant Group Assignment 1 3-36
FF3 1 BSSC 05 0 Hold (1-50) Hold TRS Class Assignment (Day) 1 3-37
FF3 1 BSSC 05 1 Hold (1-50) Hold TRS Class Assignment (Night) 1 3-38
FF3 1 BSSC 06 Hold (1-16) Hold Extension COS Assignment 1 3-38
FF3 1 BSSC 07 0 Hold (1-8) Hold Extension Digital Pad Class Assignment 5 3-39
FF3 1 BSSC 08 Hold (1 or 2) Hold Dial Plan Assignment 1 (Plan “A”) 3-39
FF3 2: Virtual Ports3-40
FF3 2 (001-576) 00 Hold (0-9999) Hold Extension Number Assignment -- 3-40
FF3 2 (001-576) 01 00 Hold (1-6) Hold Ring Frequency 1 (400/562Hz) 3-41
FF3 2 (001-576) 01 01 Hold (1-12) Hold Ring Pattern 1 (1on/3off) 3-42
FF3 2 (001-576) 02 Hold (1-72) Hold Tenant Group Assignment 1 3-43
FF3 2 (001-576) 03 Hold (1-16) Hold Extension COS Assignment 1 3-43
FF3 3: RAI Extension Port3-45
FF3 3 00 Hold (0-9999) Hold RAI Extension Number Assignment 699 3-45
FF3 3 01 Hold (1-72) Hold Tenant Group Assignment 1 3-45
FF3 3 02 Hold (1-16) Hold Extension COS Assignment 1 3-46 
						

							Section 400-Programming Introduction to DBS 576 Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Intro-37
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance
Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Defaults for FF4: FF-KEY/SOFT KEY FEATURE ASSIGNMENTS      
FF Key Address Topic Default Page
FF4 0: FF-Keys on Digital Keyphones, SLTs, and EM/24 Units4-7
FF4 0 BSSC 0 (01-32) Hold FLASH (Code) Hold FF-Key Feature Assignment (Digital 
Keyphones, SLTs, EM24s)-- 4-7
FF4 0 BSSC 1 (01-32) Hold CONF (0 or 1) Hold Trunk FF-Key: Outbound Call 
Restriction0 (Allowed) 4-10
FF4 0 BSSC 1 (01-32) Hold CONF Hold (0 or 1) 
HoldTrunk FF-Key: Inbound Answer 
Restriction0 (Allowed) 4-11
FF4 0 BSSC 1 (01-32) Hold CONF Holdx2 (0 or 1) 
HoldTrunk FF-Key: Day1 Ringing 0 (No ring) 4-11
FF4 0 BSSC 1 (01-32) Hold CONF Holdx3 (0 or 1) 
HoldTrunk FF-Key: Day2 Ringing 0 (No ring) 4-12
FF4 0 BSSC 1 (01-32) Hold CONF Holdx4 (0 or 1) 
HoldTrunk FF-Key: Night Ringing 0 (No ring) 4-12
FF4 0 BSSC 1 (01-32) Hold CONF Holdx5 (0 or 1) 
HoldTrunk FF-Key: No-Ring Auto Answer 0 (Disabled) 4-13
FF4 1: FF-Keys on DSS/72 Consoles4-14
FF4 1 BSSC 0 (01-72) Hold FLASH (Code) Hold FF-Key Feature Assignment (DSS/72) -- 4-14
FF4 1 BSSC 1 (01-72) Hold CONF (0 or 1) Hold DSS Trunk FF-Key: Outbound Call 
Restrictionn0 (Allowed) 4-15
FF4 1 BSSC 1 (01-72) Hold CONF Hold (0 or 1) 
HoldDSS Trunk FF-Key: Inbound Answer 
Restriction0 (Allowed) 4-16
FF4 1 BSSC 1 (01-72) Hold CONF Holdx2 (0 or 1) 
HoldDSS Trunk FF-Key: Day1 Ringing 0 (No ring) 4-16
FF4 1 BSSC 1 (01-72) Hold CONF Holdx3 (0 or 1) 
HoldDSS Trunk FF-Key: Day2 Ringing 0 (No ring) 4-17
FF4 1 BSSC 1 (01-72) Hold CONF Holdx4 (0 or 1) 
HoldDSS Trunk FF-Key: Night Ringing 0 (No ring) 4-17
FF4 1 BSSC 1 (01-72) Hold CONF Holdx5 (0 or 1) 
HoldDSS Trunk FF-Key: No-Ring Auto 
Answer0 (Disabled) 4-18
FF4 2: Soft Keys on Display Phones4-19
FF4 2 BSSC 0 (01-30) Hold (Code) Hold Soft Key Feature Assignment -- 4-19 
						

							Introduction to DBS 576 Programming Section 400-Programming
Intro-38
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance
Introduction
Appe ndix A
Appe ndix BDefaults for FF5: GROUPS       
FF Key Address Topic Default Page
FF5 0: Attendant Hunt Group5-3
FF5 0 01 Hold (0-9999) Hold Attendant HG Pilot Number 0 5-3
FF5 0 02 01 Hold (0-2) Hold Attendant HG/Day1 Hunt Mode 1 (Pilot terminal) 5-3
FF5 0 02 (02-21) Hold (0-9999) Hold Attendant HG/Day1 Members -- 5-4
FF5 0 02 22 Hold (0-255) Hold Attendant HG/Day1 Delayed (No Answer) Hunt 
Timer0 (stay@idle Ext) 5-5
FF5 0 02 23 Hold (0-255) Hold Attendant HG/Day1 Queuing Timer 0 (stay in HG) 5-5
FF5 0 02 24 Hold (0-9999) Hold Attendant HG/Day1 Next Extension/Hunt Group -- 5-6
FF5 0 03 01 Hold (1 or 2) Hold Attendant HG/Day2 Hunt Mode 1 (Pilot terminal) 5-6
FF5 0 03 (02-21) Hold (0-9999) Hold Attendant HG/Day2 Members -- 5-7
FF5 0 03 22 Hold (0-255) Hold Attendant HG/Day2 Delayed (No Answer) Hunt 
Timer0 (stay@idle Ext) 5-7
FF5 0 03 23 Hold (0-255) Hold Attendant HG/Day2 Queuing Timer 0 (Stay in HG) 5-8
FF5 0 03 24 Hold (0-9999) Hold Attendant HG/Day2 Next Extension/Hunt Group -- 5-9
FF5 0 04 01 Hold (1 or 2) Hold Attendant HG/Night Hunt Mode 1 (Pilot terminal) 5-9
FF5 0 04 (02-21) Hold (0-9999) Hold Attendant HG/Night Members -- 5-10
FF5 0 04 22 Hold (0-255) Hold Attendant HG/Night Delayed (No Answer) Hunt 
Timer0 (stay@idle Ext) 5-10
FF5 0 04 23 Hold (0-255) Hold Attendant HG/Night Queuing Timer 0 (Stay in HG) 5-11
FF5 0 04 24 Hold (0-9999) Hold Attendant HG/Night Next Extension/Hunt Group -- 5-11
FF5 1: Extension Hunt Groups5-13
FF5 1 (01-72) 01 Hold (0-4) Hold Extension HG Hunt Mode 1 (Terminal) 5-13
FF5 1 (01-72) 02 Hold (0-9999) Hold Extension HG Pilot Number -- 5-14
FF5 1 (01-72) (03-22) Hold FLASH (0-
9999) HoldExtension HG Members -- 5-14
FF5 1 (01-72) 23 Hold (0-255) Hold Extension HG Delayed (No Answer) Hunt Timer 16 (seconds) 5-15
FF5 1 (01-72) 24 Hold (0-255) Hold Extension HG Queuing Timer 0 (Stay in HG) 5-16
FF5 1 (01-72) 25 Hold (0-9999) Hold Extension HG Next Extension/Hunt Group -- 5-17
FF5 2: MCO Trunk Groups (Outbound)5-18
FF5 2 (01-99) 001 Hold (0 or 1) Hold MCO-Outbound Search Mode 0 (Reverse ordr) 5-18
FF5 2 (01-99) (002-577) Hold (1-576) 
HoldMCO-Outbound Trunk Group Members -- 5-18
FF5 3: MCO Trunk Groups (Inbound)5-20
FF5 3 (01-99) (001-576) Hold (1-576) 
HoldMCO-Inbound Trunk Group Members -- 5-20
FF5 4: Paging Groups5-21
FF5 4 (01-10) 01 Hold (BSSC) Hold External Page Port * (use SCC port) 5-21
FF5 4 (01-10) (02-73) Hold (0-9999) 
HoldPaging Group Members -- 5-22
FF5 5: Hot Line Group5-23
FF5 5 (01-20) 01 Hold (0-9999) Hold Hot Line Extension -- 5-23
FF5 5 (01-20) 02 Hold (0 or 1) Hold Hot Line Mode 0 (Extension) 5-23
FF5 5 (01-20) 03 Hold (1-9999 or 000-
799) HoldHot Line Destination -- 5-24
FF5 6: Call Pickup Groups5-25
FF5 6 (01-72) (01-20) Hold (1-9999) 
HoldCall Pickup Group Members -- 5-25 
						

							Section 400-Programming Introduction to DBS 576 Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Intro-39
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance
Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Defaults for FF6: TRS/ARS        
FF-key Address Topic Default Page
FF6 0: TRS/ARS Common6-5
FF6 0 00: Leading Digits Table6-5
FF6 0 00 (001-100) 0001 Hold (up to 10 digits) Hold Leading Digits Table: Prefix String -- 6-6
FF6 0 00 (001-100) 0002 Hold (0-99) Hold Leading Digits Table: Prefix ID 0 (not linked 
to Anlyz.Dig.)6-6
FF6 0 00 (001-100) 0003 Hold (0-16) Hold Leading Digits Table: Follow Digit 
Maximum06-7
FF6 0 00 (001-100) 0004 Hold (0-8) Hold Leading Digits Table: TRS Level 0 6-8
FF6 0 00 (001-100) 0005 Hold (0-2) Hold Leading Digits Table: Route Type 0 (use Route) 6-9
FF6 0 00 (001-100) 0006 Hold (1-200/100/50) Hold Leading Digits Table: Route Number 0 (None) 6-9
FF6 0 01: Analyze Digits Table6-10
FF6 0 01 (001-500) 0001 Hold (0-99) Hold Analyze Digits Table: Prefix ID 0 (No code) 6-10
FF6 0 01 (001-500) 0002 Hold (up to 8 digits) Hold Analyze Digits Table: Digit String -- 6-11
FF6 0 01 (001-500) 0003 Hold (0-16) Hold Analyze Digits Table: Follow Digit 
Maximum06-12
FF6 0 01 (001-500) 0004 Hold (0-8) Hold Analyze Digits Table: TRS Level 0 6-12
FF6 0 01 (001-500) 0005 Hold (0-2) Hold Analyze Digits Table: Route Type 0 (use Route) 6-13
FF6 0 01 (001-500) 0006 Hold (0-200/100/50) Hold Analyze Digits Table: Route Number 0 (None) 6-14
FF6 1: TRS Class Definitions6-15
FF6 1 00: TRS Class: Path Settings (non-ARS)6-15
FF6 1 00 (01-50) Hold (0001-0099) Hold (0-9) Hold TRS Level for Path (non-ARS) 9 (Allow all 
calls)6-16
FF6 1 01: TRS Class: Originator Settings (ARS/TRS)6-18
FF6 1 01 (01-50) 0001 Hold (0-9) Hold TRS Level for Originator (ARS/TRS) 9 (Allow all 
calls)6-18
FF6 1 01 (01-50) 0002 Hold (0-9) Hold ARS Level for Originator (Route List) 9 6-19
FF6 1 01 (01-50) 0003 Hold (0 or 1) Hold Trunk Queuing for Originator (Route List) 1 (Queuing) 6-20
FF6 1 02: TRS Class: Dialing Restrictions6-21
FF6 1 02 (01-50) 0001 Hold (0-20) Hold Outbound Dialed-Digit Maximum 0 (No restr.) 6-21
FF6 1 02 (01-50) 0002 Hold (0 or 1) Hold Dialing Restriction During Inbound Calls 0 (No restr.) 6-22
FF6 1 02 (01-50) 0003 Hold (0 or 1) Hold TRS Override on SSD Dialing 0 (Restricted) 6-23
FF6 1 02 (01-50) 0004 Hold (0 or 1) Hold Star (Q) and Pound (#) Dialing 
Restriction0 (Allowed) 6-23
FF6 1 03: TRS Class: SSD Range6-24
FF6 1 03 0001 Hold (000-799) Hold Allowed SSD Range 0 (No TRS) 6-24
FF6 2: ARS Settings6-25
FF6 2 00 thru 02: Time List Tables6-25
FF6 2 00 (0001-0007) Hold (1-4) Hold Day of the Week for Time List Table 1 6-25
FF6 2 01 (0001-0040) Hold (MMDD or 1-4) Hold Day of the Year for Time List Table 0000 and 1 6-26
FF6 2 02 (0-3) (01-50) (0001-0010) Hold (0000-
2359 or 0-100) HoldTime List Tables 0000 and 0 6-27
FF6 2 03: Route List Table6-28
FF6 2 03 (001-100) 0001 Hold (0-200) Hold Route List Table: 1st Priority Route No. 0 6-28
FF6 2 03 (001-100) 0002 Hold (0-9) Hold Route List Table: 1st Priority ARS Level 0 6-29
FF6 2 03 (001-100) 0003 Hold (0-200) Hold Route List Table: 2nd Priority Route No. 0  6-29 
						

							Introduction to DBS 576 Programming Section 400-Programming
Intro-40
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance
Introduction
Appe ndix A
Appe ndix BFF6 2 03 (001-100) 0004 Hold (0-9) Hold Route List Table: 2nd Priority ARS Level 0 6-30
FF6 2 03 (001-100) 0005 Hold (0 or 1) Hold Route List Table: 2nd Priority ARS Alarm 0 (Alarm off) 6-30
FF6 2 03 (001-100) 0006 Hold (0-200) Hold Route List Table: 3rd Priority Route No. 0 6-31
FF6 2 03 (001-100) 0007 Hold (0-9) Hold Route List Table: 3rd Priority ARS Level 0 6-31
FF6 2 03 (001-100) 0008 Hold (0 or 1) Hold Route List Table: 3rd Priority ARS Alarm 0 (Alarm off) 6-32
FF6 2 03 (001-100) 0009 Hold (0-200) Hold Route List Table: 4th Priority Route No. 0 6-32
FF6 2 03 (001-100) 0010 Hold (0-9) Hold Route List Table: 4th Priority ARS Level 0 6-33
FF6 2 03 (001-100) 0011 Hold (0 or 1) Hold Route List Table: 4th Priority ARS Alarm 0 (Alarm off) 6-33
FF6 2 03 (001-100) 0012 Hold (0-200) Hold Route List Table: 5th Priority Route No. 0 6-34
FF6 2 03 (001-100) 0013 Hold (0-9) Hold Route List Table: 5th Priority ARS Level 0 6-34
FF6 2 03 (001-100) 0014 Hold (0 or 1) Hold Route List Table: 5th Priority ARS Alarm 0 (Alarm off) 6-35
FF6 2 04: Route Table6-36
FF6 2 04 (001-200) 0001 Hold (0-99) Hold Route Table: Trunk Group Assignment 0 (None) 6-36
FF6 2 04 (001-200) 0002 Hold (0-50) Hold Route Table: Digit Modify Pattern No. 0 (None) 6-37
FF6 2 05: Digit Modify Table6-38
FF6 2 05 (01-50) 0001 Hold (0-24) Hold Digit Modify Table: Delete Beginning 
Digits06-38
FF6 2 05 (01-50) 0002 Hold (up to 10 char.) Hold Digit Modify Table: Add Beginning Digits -- 6-39
FF6 2 05 (01-50) 0003 Hold (up to 10 char.) Hold Digit Modify Table: Add Ending Digits -- 6-40
FF6 2 06: Authorization Code6-41
FF6 2 06 (0001-0008) Hold (up to 10 digits) Hold Authorization Code -- 6-41
FF6 2 07: Closed Number Table6-42
FF6 2 07 (001-150) 0001 Hold (1-4 digits) Hold Closed Number Table: Digit String -- 6-42
FF6 2 07 (001-150) 0002 Hold (0-16) Hold Closed Number Table: Follow Digit 
Maximum0 (None) 6-43
FF6 2 07 (001-150) 0003 Hold (0-8) Hold Closed Number Table: TRS Level 0 (Restrict all 
outbound)6-43
FF6 2 07 (001-150) 0004 Hold (0 or 1) Hold Closed Number Table: Route Type 0 (use Route) 6-44
FF6 2 07 (001-150) 0005 Hold (1-200/100) Hold Closed Number Table: Route Number 0 (None) 6-44
FF6 2 08: Tandem Exchange Table6-45
FF6 2 08 (01-50) 0001 Hold (1-4 digits) Hold Tandem Exchange Table: Digit String -- (None) 6-45
FF6 2 08 (01-50) 0002 Hold (0-16) Hold Tandem Exchange Table: Follow Digit 
Maximum0 (None) 6-46
FF6 2 08 (01-50) 0003 Hold (0-2) Hold Tandem Exchange Table: Route Type 0 (use Route) 6-46
FF6 2 08 (01-50) 0004 Hold (1-200/100) Hold Tandem Exchange Table: Route Number 0 (None) 6-47