Home
>
Panasonic
>
Communications System
>
Panasonic Digital Business System 576 Technical Manual Section 400 Programming
Panasonic Digital Business System 576 Technical Manual Section 400 Programming
Have a look at the manual Panasonic Digital Business System 576 Technical Manual Section 400 Programming online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Section 400-Programming FF2: Trunk Programming (Analog CO)
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 2-3
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF2 0 BSSC 01 16 Hold Not Used -- 2-44
FF2 0 BSSC 01 17 Hold Not Used -- 2-44
FF2 0 BSSC 01 18 Hold (0-3) Hold Auto Answer Timer 0 (1 second) 2-45
FF2 0 BSSC 01 19 Hold Not Used -- 2-45
FF2 0 BSSC 02 00 Hold (0 or 1) Hold DTMF/Dial Pulse Dialing 1 (DTMF) 2-46
FF2 0 BSSC 02 01 Hold (0 or 1) Hold Flash Pattern 0 (Pattern #1) 2-46
FF2 0 BSSC 02 02 Hold
FF2 0 BSSC 02 03 HoldNot Used -- 2-47
FF2 0 BSSC 02 04 Hold (0 or 1) Hold Trunk Connection Type (CO/PBX) 0 (CO) 2-47
FF2 0 BSSC 02 05 Hold Not Used -- 2-47
FF2 0 BSSC 02 06 Hold (0 or 1) Hold DTMF After Answer (Link Control) 0 (Allowed) 2-48
FF2 0 BSSC 02 07 Hold (0 or 1) Hold CO Dial Tone Simulation 0 (Disabled) 2-48
FF2 0 BSSC 02 08 Hold Not Used -- 2-49
FF2 0 BSSC 02 09 Hold (0 or 1) Hold SMDR for Outbound Calls 1 (Include) 2-49
FF2 0 BSSC 02 10 Hold (0 or 1) Hold SMDR for Inbound Calls 0 (Exclude) 2-49
FF2 0 BSSC 02 11 Hold (0 or 1) Hold Flash Key Operation 0 (flash to CO) 2-50
FF2 0 BSSC 02 12 Hold
FF2 0 BSSC 02 13 Hold
FF2 0 BSSC 02 14 HoldNot Used -- 2-51
FF2 0 BSSC 02 15 Hold (0 or 1) Hold DTMF Conversion (Outbound Calls) 1 (Enabled) 2-51
FF2 0 BSSC 02 16 Hold (0 or 1) Hold DTMF Conversion (Inbound Calls) 1 (Enabled) 2-52
FF2 0 BSSC 02 17 Hold (0 or 1) Hold Indirect LCR 0 (Disabled) 2-52
FF2 0 BSSC 02 18 Hold
FF2 0 BSSC 02 19 Hold
FF2 0 BSSC 02 20 HoldNot Used -- 2-53
FF2 0 BSSC 03 0 Hold (0 or 1) Hold Day1 Ring Type 0 (Tie incoming) 2-53
FF2 0 BSSC 03 1 Hold Not Used -- 2-54
FF2 0 BSSC 03 2 Hold (0 or 1) Hold Day2 Ring Type 0 (Tie incoming) 2-54
FF2 0 BSSC 03 3 Hold Not Used -- 2-54
FF2 0 BSSC 03 4 Hold (0 or 1) Hold Night Ring Type 0 (Tie incoming) 2-55
FF2 0 BSSC 03 5 Hold Not Used -- 2-55
FF2 0 BSSC 04 0 Hold
thru
FF2 0 BSSC 04 5 HoldNot Used -- 2-56
FF2 0 BSSC 05 Hold (0-72) Hold Tenant Group Assignment 0 (none) 2-56
FF2 0 BSSC 06 0 Hold (1-50) Hold TRS Class Assignment (Day) 1 2-57
FF2 0 BSSC 06 1 Hold (1-50) Hold TRS Class Assignment (Night) 1 2-57
FF2 0 BSSC 07 Hold (1-16) Hold Trunk COS Assignment 1 2-58
FF2 0 BSSC 08 Hold (1-16) Hold Trunk Digital Pad Class Assignment 8 2-58
FF2 1: ISDN Trunks2-59
FF2 1 BSSC 00 0 Hold (BSSC) Hold D-Channel Position -- 2-59
FF2 1 BSSC 00 1 Hold (1-127) Hold D-Channel Interface ID Code -- 2-59
FF2 1 BSSC 01 Hold (0-576) Hold Trunk Number Assignment (1st Channel) -- 2-60
FF2 1 BSSC 02 00 Hold (0 or 1) Hold Trunk Connection Type (Pt-to-Pt/MultiPt) 0 (Point-to-Point) 2-61
FF2 1 BSSC 02 01 Hold (0-6) Hold Ring Frequency 1 (400/562Hz) 2-62
FF2 1 BSSC 02 02 Hold (0-12) Hold Ring Pattern 1 (1on/3off) 2-63
FF2 1 BSSC 02 03 Hold (0-2) Hold DTMF On/Off Pattern During Talk 1 (Pattern #2) 2-64
FF2 1 BSSC 02 04 Hold
FF2 1 BSSC 02 05 HoldNot Used -- 2-64
FF2 1 BSSC 03 00 Hold (0 or 1) Hold Trunk Connection Type (CO/PBX) 0 (CO) 2-65
FF2: Trunk Programming (Analog CO) Section 400-Programming
Page 2-4
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF2 1 BSSC 03 01 Hold (0 or 1) Hold Auto-Repeat Dial 1 (Allowed) 2-65
FF2 1 BSSC 03 02 Hold (0 or 1) Hold SMDR for Outbound Calls 1 (Include) 2-66
FF2 1 BSSC 03 03 Hold (0 or 1) Hold SMDR for Inbound Calls 0 (Exclude) 2-66
FF2 1 BSSC 03 04 Hold (0 or 1) Hold Flash Key Operation 0 (talk disconnct/
keep trunk)2-67
FF2 1 BSSC 03 05 Hold (0 or 1) Hold Long Talk Alarm 0 (Disabled) 2-68
FF2 1 BSSC 03 06 Hold (0 or 1) Hold Alarm Ringing 0 (Disabled) 2-68
FF2 1 BSSC 03 07 Hold (0 or 1) Hold Slide Ringing 0 (Disabled) 2-69
FF2 1 BSSC 03 08 Hold (0 or 1) Hold Indirect LCR 0 (Disabled) 2-70
FF2 1 BSSC 03 09 Hold (0 or 1) Hold B-Channel Select 0 (Highest- no.’d) 2-70
FF2 1 BSSC 03 10 Hold (0 or 1) Hold B-Channel Numbering (Layer 3) 0 (Slot mapping) 2-71
FF2 1 BSSC 03 11 Hold (0 or 1) Hold Call ID Length 0 (1 byte/BRI)
1 (2 bytes/PRI)2-72
FF2 1 BSSC 03 12 Hold (0 or 1) Hold Calling Number Send 1 (Enabled) 2-72
FF2 1 BSSC 03 13 Hold (0 or 1) Hold Sub-Address Type 0 (IA5) 2-73
FF2 1 BSSC 03 14 Hold
thru
FF2 1 BSSC 03 20 HoldNot Used -- 2-74
FF2 1 BSSC 04 0 Hold (0-6) Hold Day1 Ring Type 0 (multi-incoming) 2-75
FF2 1 BSSC 04 1 Hold (0-9999) Hold Day1 Ring Destination -- 2-75
FF2 1 BSSC 04 2 Hold (0-6) Hold Day2 Ring Type 0 (multi-incoming) 2-76
FF2 1 BSSC 04 3 Hold (0-9999) Hold Day2 Ring Destination -- 2-76
FF2 1 BSSC 04 4 Hold (0-6) Hold Night Ring Type 0 (multi-incoming) 2-77
FF2 1 BSSC 04 5 Hold (0-9999) Hold Night Ring Destination -- 2-77
FF2 1 BSSC 05 0 Hold (0-4) Hold Day1 Delayed Ring Type 0 (Disabled) 2-78
FF2 1 BSSC 05 1 Hold (0-9999) Hold Day1 Delayed Ring Destination -- 2-78
FF2 1 BSSC 05 2 Hold (0-4) Hold Day2 Delayed Ring Type 0 (Disabled) 2-79
FF2 1 BSSC 05 3 Hold (0-9999) Hold Day2 Delayed Ring Destination -- 2-79
FF2 1 BSSC 05 4 Hold (0-4) Hold Night Delayed Ring Type 0 (Disabled) 2-80
FF2 1 BSSC 05 5 Hold (0-9999) Hold Night Delayed Ring Destination -- 2-80
FF2 1 BSSC 06 (00-23) Hold (0-72) Hold Tenant Group Assignment (B-Channel) 0 (none) 2-81
FF2 1 BSSC 07 0 Hold (1-50) Hold TRS Class Assignment (Day) 1 2-81
FF2 1 BSSC 07 1 Hold (1-50) Hold TRS Class Assignment (Night) 1 2-82
FF2 1 BSSC 08 Hold (1-16) Hold Trunk COS Assignment 1 2-82
FF2 1 BSSC 09 0 Hold (up to 6 digits) Hold Calling Number Area Code -- 2-83
FF2 1 BSSC 09 1 Hold (up to 6 digits) Hold Calling Number Office Code -- 2-84
FF2 1 BSSC 09 2 Hold (up to 4 digits) Hold Calling Number Subscriber Number -- 2-84
FF2 1 BSSC 10 Hold (1-16) Hold Trunk Digital Pad Class Assignment 7 2-85
FF2 2: T1 Trunks (CO)2-86
FF2 2 BSSCC 00 Hold (0-2) Hold Trunk Connection Type (CO/Network) 1 (CO) 2-86
FF2 2 BSSCC 01 Hold (0-576) Hold Trunk Number Assignment -- 2-87
FF2 2 BSSCC 02 00 Hold (0-3) Hold Trunk Signal Type 3 (DID-Wink) 2-87
FF2 2 BSSCC 02 01 Hold (0 or 1) Hold Disconnect Detect 0 (Disabled) 2-88
FF2 2 BSSCC 02 02 Hold (0 or 1) Hold Dial Pulse Minimum Pause 0 (625ms) 2-88
FF2 2 BSSCC 02 03 Hold (0 or 1) Hold Ground Start Ring Type 0 (CO signal) 2-89
FF2 2 BSSCC 02 04 Hold (0 or 1) Hold DID Ring Detect Timer 0 (32ms) 2-89
FF2 2 BSSCC 02 05 Hold Not Used -- 2-90
FF2 2 BSSCC 02 06 Hold (0 or 1) Hold Frame Format 0 (SF) 2-90
FF2 2 BSSCC 02 07 Hold (0 or 1) Hold Line Coding 0 (AMI) 2-91
Section 400-Programming FF2: Trunk Programming (Analog CO)
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 2-5
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF2 2 BSSCC 02 08 Hold (0-6) Hold Ring Frequency 1 (400/562Hz) 2-92
FF2 2 BSSCC 02 09 Hold (0-12) Hold Ring Pattern 1 (1on/3off) 2-93
FF2 2 BSSCC 02 10 Hold (0-2) Hold DTMF On/Off Pattern During Talk 1 (Pattern #2) 2-94
FF2 2 BSSCC 02 11 Hold (0-2) Hold DTMF On/Off Pattern for Outgoing Dialing 0 (Pattern #1) 2-94
FF2 2 BSSCC 02 12 Hold (0-3) Hold Disconnect Supervision Timer
LS/GS: 0 (281ms)DID: 0 (96ms)2-95
FF2 2 BSSCC 02 13 Hold (0-3) Hold Guard Timer for Outbound Calls 0 (500ms) 2-96
FF2 2 BSSCC 02 14 Hold (0-3) Hold Inbound Ground Detect Timer 0 (1 second) 2-96
FF2 2 BSSCC 02 15 Hold Not Used -- 2-97
FF2 2 BSSCC 03 00 Hold (0 or 1) Hold DTMF/Dial Pulse Dialing 1 (DTMF) 2-97
FF2 2 BSSCC 03 01 Hold (0 or 1) Hold Flash Pattern 0 (Pattern #1) 2-97
FF2 2 BSSCC 03 02 Hold (0 or 1) Hold Dial Tone Detection 1 (Enabled) 2-98
FF2 2 BSSCC 03 03 Hold (0 or 1) Hold Trunk Connection Type (CO/PBX) 0 (CO) 2-98
FF2 2 BSSCC 03 04 Hold (0 or 1) Hold Auto-Repeat Dial 1 (Allowed) 2-99
FF2 2 BSSCC 03 05 Hold (0 or 1) Hold DTMF After Answer (Link Control) 0 (Allowed) 2-99
FF2 2 BSSCC 03 06 Hold (0 or 1) Hold CO Dial Tone Simulation 0 (Disabled) 2-100
FF2 2 BSSCC 03 07 Hold (0 or 1) Hold SMDR for Outbound Calls 1 (Include) 2-100
FF2 2 BSSCC 03 08 Hold (0 or 1) Hold SMDR for Inbound Calls 0 (Exclude) 2-101
FF2 2 BSSCC 03 09 Hold (0 or 1) Hold Flash Key Operation 0 (flash to CO) 2-101
FF2 2 BSSCC 03 10 Hold (0 or 1) Hold Long Talk Alarm 0 (Disabled) 2-102
FF2 2 BSSCC 03 11 Hold (0 or 1) Hold Alarm Ringing 0 (Disabled) 2-102
FF2 2 BSSCC 03 12 Hold (0 or 1) Hold Slide Ringing 0 (Disabled) 2-103
FF2 2 BSSCC 03 13 Hold (0 or 1) Hold DTMF Conversion (Outbound Calls) 1 (Enabled) 2-104
FF2 2 BSSCC 03 14 Hold (0 or 1) Hold DTMF Conversion (Inbound Calls) 1 (Enabled) 2-104
FF2 2 BSSCC 03 15 Hold (0 or 1) Hold Indirect LCR 0 (Disabled) 2-105
FF2 2 BSSCC 03 16 Hold (0 or 1) Hold Call Duration 1 (System timer) 2-105
FF2 2 BSSCC 03 17 Hold
FF2 2 BSSCC 03 18 HoldNot Used -- 2-106
FF2 2 BSSCC 04 0 Hold (0-6) Hold Day1 Ring Type 0 (multi-incoming) 2-107
FF2 2 BSSCC 04 1 Hold (0-9999) Hold Day1 Ring Destination -- 2-107
FF2 2 BSSCC 04 2 Hold (0-6) Hold Day2 Ring Type 0 (multi-incoming) 2-108
FF2 2 BSSCC 04 3 Hold (0-9999) Hold Day2 Ring Destination -- 2-108
FF2 2 BSSCC 04 4 Hold (0-6) Hold Night Ring Type 0 (multi-incoming) 2-109
FF2 2 BSSCC 04 5 Hold (0-9999) Hold Night Ring Destination -- 2-109
FF2 2 BSSCC 05 0 Hold (0-4) Hold Day1 Delayed Ring Type 0 (Disabled) 2-110
FF2 2 BSSCC 05 1 Hold (0-9999) Hold Day1 Delayed Ring Destination -- 2-110
FF2 2 BSSCC 05 2 Hold (0-4) Hold Day2 Delayed Ring Type 0 (Disabled) 2-111
FF2 2 BSSCC 05 3 Hold (0-9999) Hold Day2 Delayed Ring Destination -- 2-111
FF2 2 BSSCC 05 4 Hold (0-4) Hold Night Delayed Ring Type 0 (Disabled) 2-112
FF2 2 BSSCC 05 5 Hold (0-9999) Hold Night Delayed Ring Destination -- 2-112
FF2 2 BSSCC 06 Hold (1-72) Hold Tenant Group Assignment -- 2-113
FF2 2 BSSCC 07 0 Hold (1-50) Hold TRS Class Assignment (Day) 1 2-113
FF2 2 BSSCC 07 1 Hold (1-50) Hold TRS Class Assignment (Night) 1 2-114
FF2 2 BSSCC 08 Hold (1-16) Hold Trunk COS Assignment 1 2-114
FF2 2 BSSCC 09 Hold (1-16) Hold Trunk Digital Pad Class Assignment 7 2-115
FF2 2: T1 Trunks (E&M Tie)2-116
FF2 2 BSSCC 00 Hold (1-2) Hold Trunk Connection Type (CO/Network) 1 (CO) 2-116
FF2 2 BSSCC 01 Hold (0-576) Hold Trunk Number Assignment -- 2-116
FF2: Trunk Programming (Analog CO) Section 400-Programming
Page 2-6
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF2 2 BSSCC 02 00 Hold (0-5) Hold Trunk Signal Type 5 (E&M Wink) 2-117
FF2 2 BSSCC 02 01 Hold
FF2 2 BSSCC 02 02 Hold
FF2 2 BSSCC 02 03 HoldNot Used -- 2-118
FF2 2 BSSCC 02 04 Hold (0 or 1) Hold Ring Detect Timer 0 (48ms) 2-118
FF2 2 BSSCC 02 05 Hold (0 or 1) Hold Auto Answer for Outbound Calls 0 (Disabled) 2-119
FF2 2 BSSCC 02 06 Hold (0 or 1) Hold Frame Format 0 (SF) 2-119
FF2 2 BSSCC 02 07 Hold (0 or 1) Hold Line Coding 0 (AMI) 2-120
FF2 2 BSSCC 02 08 Hold (0-6) Hold Ring Frequency 1 (400/562Hz) 2-121
FF2 2 BSSCC 02 09 Hold (0-12) Hold Ring Pattern 1 (1on/3off) 2-122
FF2 2 BSSCC 02 10 Hold (0-2) Hold DTMF On/Off Pattern During Talk 1 (Pattern #2) 2-123
FF2 2 BSSCC 02 11 Hold (0-2) Hold DTMF On/Off Pattern for Outgoing Dialing 0 (Pattern #1) 2-123
FF2 2 BSSCC 02 12 Hold (0-3) Hold Disconnect Supervision Timer 0 (160ms) 2-124
FF2 2 BSSCC 02 13 Hold
FF2 2 BSSCC 02 14 HoldNot Used -- 2-124
FF2 2 BSSCC 02 15 Hold (0-3) Hold Auto Answer Timer 0 (1 second) 2-125
FF2 2 BSSCC 03 00 Hold (0 or 1) Hold DTMF/Dial Pulse Dialing 1 (DTMF) 2-125
FF2 2 BSSCC 03 01 Hold (0 or 1) Hold Flash Pattern 0 (Pattern #1) 2-126
FF2 2 BSSCC 03 02 Hold Not Used -- 2-126
FF2 2 BSSCC 03 03 Hold (0 or 1) Hold Trunk Connection Type (CO/PBX) 0 (CO) 2-127
FF2 2 BSSCC 03 04 Hold Not Used -- 2-127
FF2 2 BSSCC 03 05 Hold (0 or 1) Hold DTMF After Answer (Link Control) 0 (Allowed) 2-127
FF2 2 BSSCC 03 06 Hold (0 or 1) Hold CO Dial Tone Simulation 0 (Disabled) 2-128
FF2 2 BSSCC 03 07 Hold (0 or 1) Hold SMDR for Outbound Calls 1 (Include) 2-128
FF2 2 BSSCC 03 08 Hold (0 or 1) Hold SMDR for Inbound Calls 0 (Exclude) 2-129
FF2 2 BSSCC 03 09 Hold (0 or 1) Hold Flash Key Operation 0 (flash to CO) 2-129
FF2 2 BSSCC 03 10 Hold
FF2 2 BSSCC 03 11 Hold
FF2 2 BSSCC 03 12 HoldNot Used -- 2-130
FF2 2 BSSCC 03 13 Hold (0 or 1) Hold DTMF Conversion (Outbound Calls) 1 (Enabled) 2-130
FF2 2 BSSCC 03 14 Hold (0 or 1) Hold DTMF Conversion (Inbound Calls) 1 (Enabled) 2-131
FF2 2 BSSCC 03 15 Hold (0 or 1) Hold Indirect LCR 0 (Disabled) 2-131
FF2 2 BSSCC 03 16 Hold
FF2 2 BSSCC 03 17 Hold
FF2 2 BSSCC 03 18 HoldNot Used -- 2-132
FF2 2 BSSCC 04 0 Hold (0 or 1) Hold Day1 Ring Type 0 (Tie incoming) 2-132
FF2 2 BSSCC 04 1 Hold Not Used -- 2-133
FF2 2 BSSCC 04 2 Hold (0 or 1) Hold Day2 Ring Type 0 (Tie incoming) 2-133
FF2 2 BSSCC 04 3 Hold Not Used -- 2-132
FF2 2 BSSCC 04 4 Hold (0 or 1) Hold Night Ring Type 0 (Tie incoming) 2-134
FF2 2 BSSCC 04 5 Hold Not Used -- 2-134
FF2 2 BSSCC 05 0 Hold
thru
FF2 2 BSSCC 05 5 HoldNot Used -- 2-135
FF2 2 BSSCC 06 Hold (0-72) Hold Tenant Group Assignment 0 (none) 2-135
FF2 2 BSSCC 07 0 Hold (1-50) Hold TRS Class Assignment (Day) 1 2-136
FF2 2 BSSCC 07 1 Hold (1-50) Hold TRS Class Assignment (Night) 1 2-136
FF2 2 BSSCC 08 Hold (1-16) Hold Trunk COS Assignment 1 2-137
FF2 2 BSSCC 09 Hold (1-16) Hold Trunk Digital Pad Class Assignment 7 2-137
Section 400-Programming FF2: Trunk Programming (Analog CO)
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 2-7
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF2 0: Analog Trunks (CO)
NOTE:The same FF2 0 addresses are also used for analog E&M tie trunks.
However, their settings are different. See page 2-37 for Analog Trunks
(E&M Tie) settings.
Notes:
Press the BLK-DOWN soft key instead of the last HOLD in the above address, to scroll to the next
BSSC trunk position and assign it a trunk number (stay in same address).
Before removing a Trunk Card from a Free Slot, you must first clear the Trunk Numbers (if assigned)
from all of the Card’s BSSC ports in this address. See pg. 0-3 for more information.
The range of trunk numbers available for assignment depends on the CPC used:
with a CPC-96: Trunk Nos. 1-96
with a CPC-288: Trunk Nos. 1-288
with a CPC-576: Trunk Nos. 1-576
Related Programming:
Trunk Connection Type (CO/PBX) (pg. 2-19) FF2 0 BSSC 02 04 Hold (0 or 1) Hold
Trunk Numbering (pg. 1-22) FF1 0 02 0001 Hold (0 or 1) Hold
Trunk Number Assignment
(all CPCs) - Version 1.0 or higher
Assign trunk numbers to analog CO trunk circuits. (Maximum 576 trunk
circuits are available in a 6-cabinet system with a CPC-576 card.)
FF2 0 BSSC 00 Hold (0-576) Hold
Trunk Number assigned to trunk circuit BSSC: Analog (CO) Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8(0 = no trunk)
default: [no assignment]
$
%-4 )-8
(or BLK-DOWN)
FF2: Trunk Programming (Analog CO) Section 400-Programming
Page 2-8
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
Notes:
If this address is set to “1” (Loop Detect enabled), system will check for loop signal when the trunk is
seized to place an outgoing call.
Related Programming:
Trunk Signal Type (pg. 2-8) FF2 0 BSSC 01 00 Hold (0-3) Hold
Trunk Signal Type
(all CPCs) - Version 1.0 or higher
Set the analog CO trunk’s signaling type.
FF2 0 BSSC 01 00 Hold (0-3) Hold
BSSC: Analog (CO) Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-80=Loop Start (default for LS and LS/GS card)
1=Ground Start (default for GS card)
2=DID Immediate Start (default for DID card)
3=DID Wink Start
$
, %6
Loop Detect
(all CPCs) - Version 1.0 or higher
(“fire-and-disconnect”) Enable/Disable system check for Loop Detect, if the
trunk is set for Loop-Start signaling in
Trunk Signal Type (previous address).
FF2 0 BSSC 01 01 Hold (0 or 1) Hold
BSSC: Analog (CO) Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-80=No Loop Detect
1=Loop Detect (default)
$
5!!6
Section 400-Programming FF2: Trunk Programming (Analog CO)
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 2-9
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
Loop Detect (pg. 2-8) FF2 0 BSSC 01 01 Hold (0 or 1) Hold
Notes:
Related Programming:
DTMF/Dial Pulse Dialing (pg. 2-17) FF2 0 BSSC 02 00 Hold (0 or 1) Hold
Disconnect Detect
(all CPCs) - Version 1.0 or higher
Enable/Disable system detection of disconnect signal (drop in voltage) sent by
the CO when the other end disconnects first. Applies to outgoing calls on
analog Loop-Start or Ground-Start trunks with
Loop Detect enabled.
FF2 0 BSSC 01 02 Hold (0 or 1) Hold
BSSC: Analog (CO) Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-80=Disconnect Detect (default)
1=No Disconnect Detect
$
Dial Pulse Minimum Pause
(all CPCs) - Version 1.0 or higher
Set the dial pulse minimum pause time.
FF2 0 BSSC 01 03 Hold (0 or 1) Hold
0=625 ms (default-US) orBSSC: Analog (CO) Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
750 ms (default-UK)
1=1000 ms (1 second)
$
$ 2 )@$-
FF2: Trunk Programming (Analog CO) Section 400-Programming
Page 2-10
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Related Programming:
Trunk Signal Type (pg. 2-8) FF2 0 BSSC 01 00 Hold (0-3) Hold
Notes:
If CO is set to Immediate Start, system will wait this long before recognizing ring from CO.
This setting is available only if the
Trunk Signal Type is set for “2” (DID Immediate Start) or “3” (DID
Wink Start); it is not available for Loop Start or Ground Start signaling types.
Related Programming:
Trunk Signal Type (pg. 2-8) FF2 0 BSSC 01 00 Hold (0-3) Hold
Ground Start Ring Type
(all CPCs) - Version 1.0 or higher
Set whether the CO supplies the real ringing signal. Applies to Ground-Start
trunks, which typically need Tip-Ground for incoming signal.
FF2 0 BSSC 01 04 Hold (0 or 1) Hold
BSSC: Analog (CO) Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-80=Ringing signal (default)
1=No ringing signal
$
1 %6
DID Ring Detect Timer
(all CPCs) - Version 1.0 or higher
Set the DID Ring Detect timer, which will be used to specify the ringing.
FF2 0 BSSC 01 05 Hold (0 or 1) Hold
BSSC: Analog (CO) Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-80=32 ms (default)
1=96 ms
$
*% %
Section 400-Programming FF2: Trunk Programming (Analog CO)
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 2-11
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Typically, COs in the U.S. do not send reverse signaling for called-party answer (set this address to “1”).
The
Call Duration Timer for Outbound CO Calls will not work on this trunk if the above address is
set to “0” (reverse signal from CO), and the trunk’s
Call Duration setting is set to “1” (use system
timer).
Related Programming:
Call Duration (pg. 2-19) FF2 0 BSSC 02 03 Hold (0 or 1) Hold
Call Duration Timer (analog CO) (pg. 1-118) FF1 1 01 0005 Hold (1-255) Hold
Not Used
(all CPCs) - Version 1.0 or higher
FF2 0 BSSC 01 06 Hold
FF2 0 BSSC 01 07 Hold
FF2 0 BSSC 01 08 Hold
$
)! B
$
% )! B
$
)! B
Reverse Answer Signal Control
(all CPCs) - Version 1.0 or higher
(not used in U.S.) Set whether the CO sends back reverse signaling when the
called party answers an outgoing call on this trunk.
FF2 0 BSSC 01 09 Hold (0 or 1) Hold
BSSC: Analog (CO) Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-80=Reverse signal from CO.
1=No reverse signal from CO. (default)
$
& ( /) 1
FF2: Trunk Programming (Analog CO) Section 400-Programming
Page 2-12
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
To install Caller ID:
(1) Throw switches on the LTRK/8 (Loop-Start Trunk/8-port) Card.
(2) Install the CID Card (daughter board, mounted on the LTRK/8 Card).
(3) Set this parameter.
See
Section 300-Installation for more information.
Related Programming:
Caller ID Ring Control (pg. 2-21) FF2 0 BSSC 02 08 Hold (0 or 1) Hold
Notes:
If “0” (Melody) is selected, you must set the next address to “12” (Continuous Tone). Otherwise, the
Ring Pattern will interrupt the melody heard.
Related Programming:
Caller ID
(all CPCs) - Version 1.0 or higher
Enable/Disable the Caller ID feature on this trunk.
FF2 0 BSSC 01 10 Hold (0 or 1) Hold
BSSC: Analog (CO) Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-80=Disable Caller ID. (default)
1=Enable Caller ID.
$
!!,
Ring Frequency
(all CPCs) - Version 1.0 or higher
(digital phones only) Set the ring frequency for incoming calls on this trunk.
FF2 0 BSSC 01 11 Hold (0-6) Hold
BSSC: Analog (CO) Trunk Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8
1=400/562 Hz (default)
2=1000/1340 Hz
3=400 Hz
4=800/1040 Hz
5=1040/1320 Hz
6=660/1320 Hz 0=Melody
$
F-