Home
>
Panasonic
>
Communications System
>
Panasonic Digital Business System 576 Technical Manual Section 400 Programming
Panasonic Digital Business System 576 Technical Manual Section 400 Programming
Have a look at the manual Panasonic Digital Business System 576 Technical Manual Section 400 Programming online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Section 400-Programming FF4: FF-Key/Soft Key Feature Assignment
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 4-9
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Figure 4-1: FF-key layout on a Small-Display phone (44-series)
Figure 4-2: FF-key layout on an EM/24 unit (44-series)
Speakerphone
GHI JKL MNO
PRS TUV WXYAB CDE F
03:14 Fri DEC 05164 Davidson C
4) +
4) +
DIGITAL BUSINESS SYST EM
Spe akerphone
GHI JKLMNO
PRS TUV W XYAB CDEF
03:14 Fri DEC 05164 Davidson C
DIGITAL BUSINESS SYSTEM
Speakerphone
GHI JKLMN O
PRS TUV WXYAB CDE F
03:14 Fri DEC 05164 Davidson C
4) +
< + 1 ;*
%! 6! 9
4 ! 9
5 5 69!G
9 69!?
+! 6!
6!!
9
@%! 6! 9
4 ! 9 *2 0
BG 9 *20
?
+! 6! 6!!
9
@
FF4: FF-Key/Soft Key Feature Assignment Section 400-Programming
Page 4-10
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
The LCD display will show the allow/restrict settings for this and the
next 5 addresses after the first “Hold” is pressed in the above address:
If
“Outbound Call Restriction” is set to 0=Allow, and
“Inbound Answer Restriction” is set to 1=Do Not Allow,
the FF-key can’t be used while an incoming call is ringing in on it (the LED will blink green). Once the
call is answered on another phone, however, the LED will extinguish and the FF-key will become
available for making an outbound call.
To set delayed ringing for trunk FF-keys, use the
Day1/2/Night Delayed Ring Type/Destination
addresses in FF2.
Related Programming:
Trunk Key Operation: Direct Calls (pg. 3-14) FF3 0 BSSC 04 12 Hold (0 or 1) Hold
Trunk Key Operation: HOLD (pg. 3-15) FF3 0 BSSC 04 13 Hold (0 or 1) Hold
Trunk Key Operation: Multiple Call Pickup (pg. 3-15) FF3 0 BSSC 04 14 Hold (0 or 1) Hold
Trunk Key Operation: Brokers Hold (pg. 3-16) FF3 0 BSSC 04 15 Hold (0 or 1) Hold
Trunk FF-Key: Outbound Call Restriction
(all CPCs) - Version 1.0 or higher
(for digital keyphones, SLTs, and EM24s) Allow/Restrict outbound calls on the FF-
key programmed as a CO trunk, MCO trunk group, Virtual Port, or DSS/BLF key.
FF4 0 BSSC 1 (01-32) Hold CONF (0 or 1) Hold
0=Allow outbound calls on this FF-key.BSSC: Extension Port
B=Cabinet no. 1-6
SS=Card Slot no. 01-12
C=Circuit no. 1-801=FF1 key
02=FF2 key
03=FF3 key
...
32=FF32 key1=Do Not Allow outbound calls on this (default)
$
#-! %
FF-key.
$
()((((3 )#
(= HI)= HI
Section 400-Programming FF4: FF-Key/Soft Key Feature Assignment
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 4-11
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
If
“Inbound Answer Restriction” is set to 1=Do Not Allow, the FF-key will still flash green for an
incoming CO or MCO call, although the user won’t be able to answer it.
Related Programming:
Notes:
Even if this address is set to 0=Do Not Ring (default), the user can still pick up the incoming call by
pressing the FF-key, as long as
“Inbound Answer Restriction” (pg. 4-11) is set to 0=Allow (default).
(all CPCs - Version 1.3 or higher) For DSS/BLF keys, if this address is set to 1=Ring, Auto-Answer will
apply; user simply picks up the handset to answer the incoming call on the DSS/BLF key.
Related Programming:
BLF Call Pickup (pg. 1-24) FF1 0 01 0006 Hold (0 or 1) Hold
Trunk FF-Key: Inbound Answer Restriction
(all CPCs) - Version 1.0 or higher
(for digital keyphones, SLTs, and EM24s) Allow/Restrict the ability to answer incoming calls
on the FF-key programmed as a CO trunk, MCO trunk group, Virtual Port, or DSS/BLF key.
FF4 0 BSSC 1 (01-32) Hold CONF Hold (0 or 1) Hold
0=Allow answering inbound calls onBSSC: Extension Port
B=Cabinet no. 1-6
SS=Card Slot no. 01-12
C=Circuit no. 1-801=FF1 key
02=FF2 key
03=FF3 key
...
32=FF32 key1=Do Not Allow answering inbound calls this FF-key. (default)
$
! %
on this FF-key.
Trunk FF-Key: Day1 Ringing
(all CPCs) - Version 1.0 or higher
(for digital keyphones, SLTs, and EM24s) Allow/Restrict phone ringing for an
incoming call on this Trunk/MCO/Virtual Port/DSS/BLF key during Day1 mode.
FF4 0 BSSC 1 (01-32) Hold CONF Holdx2 (0 or 1) Hold
0=Do Not Ring inbound calls on thisBSSC: Extension Port
B=Cabinet no. 1-6
SS=Card Slot no. 01-12
C=Circuit no. 1-801=FF1 key
02=FF2 key
03=FF3 key
...
32=FF32 key1=Ring inbound calls on this FF-key FF-key during Day1 mode. (default)
during Day1 mode.
$
/
FF4: FF-Key/Soft Key Feature Assignment Section 400-Programming
Page 4-12
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes: (same as Day1 Ringing - previous page)
Related Programming: (same as Day1 Ringing - previous page)
Notes: (same as Day1 Ringing - previous page)
Related Programming: (same as Day1 Ringing - previous page)
Trunk FF-Key: Day2 Ringing
(all CPCs) - Version 1.0 or higher
(for digital keyphones, SLTs, and EM24s) Allow/Restrict phone ringing for an
incoming call on this Trunk/MCO/Virtual Port/DSS/BLF key during Day2 mode.
FF4 0 BSSC 1 (01-32) Hold CONF Holdx3 (0 or 1) Hold
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Card Slot no. 01-12
C=Circuit no. 1-801=FF1 key
02=FF2 key
03=FF3 key
...
32=FF32 key
$
/
0=Do Not Ring inbound calls on this
1=Ring inbound calls on this FF-key FF-key during Day2 mode. (default)
during Day2 mode.
Trunk FF-Key: Night Ringing
(all CPCs) - Version 1.0 or higher
(for digital keyphones, SLTs, and EM24s) Allow/Restrict phone ringing for an
incoming call on this Trunk/MCO/Virtual Port/DSS/BLF key during Night mode.
FF4 0 BSSC 1 (01-32) Hold CONF Holdx4 (0 or 1) Hold
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Card Slot no. 01-12
C=Circuit no. 1-801=FF1 key
02=FF2 key
03=FF3 key
...
32=FF32 key
$
)9 /
0=Do Not Ring inbound calls on this
1=Ring inbound calls on this FF-key FF-key during Night mode. (default)
during Night mode.
Section 400-Programming FF4: FF-Key/Soft Key Feature Assignment
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 4-13
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Even if this is set to 1=Enabled, pressing ON/OFF will not pick up the call (user must pick up handset).
Related Programming:
BLF Call Pickup (pg. 1-24) FF1 0 01 0006 Hold (0 or 1) Hold
Trunk FF-Key: No-Ring Auto Answer
(all CPCs) - Version 1.0 or higher
(for digital keyphones, SLTs, and EM24s) Allow/Restrict the ability to answer
incoming calls that are blinking, but not ringing, on this Trunk/MCO/Virtual Port/
DSS/BLF key, simply by picking up the handset.
FF4 0 BSSC 1 (01-32) Hold CONF Holdx5 (0 or 1) Hold
0=Disabled; this address has no effect. BSSC: Extension Port
B=Cabinet no. 1-6
SS=Card Slot no. 01-12
C=Circuit no. 1-801=FF1 key
02=FF2 key
03=FF3 key
...
32=FF32 key1=Enabled; pick up handset to answer call. (default)
(don’t have to press FF-key)
$
)! /-! /)
FF4: FF-Key/Soft Key Feature Assignment Section 400-Programming
Page 4-14
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF4 1: FF-Keys on DSS/72 Consoles
Notes:
See
Notes on pg. 4-7. The same applies to DSS/72 consoles.
The port must already be set for DSS/72. See
Extensions - Phone Type.
Related Programming:
Phone Type (pg. 3-3) on extensions FF3 0 BSSC 00 Hold (1-3) Hold
Figure 4-3: FF-key layout on a DSS/72 Attendant Console (44-series)
FF-Key Feature Assignment (DSS/72)
(all CPCs) - Version 1.0 or higher
Assign Feature Codes to the FF-keys on DSS/72 Attendant Consoles.
FF4 1 BSSC 0 (01-72) Hold FLASH (Code) Hold
Feature Code Assignment (see pg. 4-2)BSSC: Attendant Port
B=Cabinet no. 1-6
SS=Card Slot no. 01-12
C=Circuit no. 1-801=FF1 key
02=FF2 key
03=FF3 key
...
72=FF72 key
See figure below for FF-key numbering on a DSS/72.
initial default: [no assignment]
$
-!
(to clear current
feature assignment)
03:14 Fri DEC 0516 4 Dav id son C
Spe akerpho ne
ABCDEF
GHI J KL MN O
PRS
TU VWXY
,
< + 1 *8
%! 6!9 4G
- 9
@%! 6!
9 4G
- 9
@
Section 400-Programming FF4: FF-Key/Soft Key Feature Assignment
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 4-15
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
The LCD display will show the allow/restrict settings for this and the
next 5 addresses after the first “Hold” is pressed in the above address:
If
“Outbound Call Restriction” is set to 0=Allow, and
“Inbound Answer Restriction” is set to 1=Do Not Allow,
the FF-key can’t be used while an incoming call is ringing in on it (the LED will blink green). Once the
call is answered on another phone, however, the LED will extinguish and the FF-key will become
available for making an outbound call.
To set delayed ringing for trunk FF-keys, use the
Day1/2/Night Delayed Ring Type/Destination
addresses in FF2.
Related Programming:
Trunk Key Operation: Direct Calls (pg. 3-14) FF3 0 BSSC 04 12 Hold (0 or 1) Hold
Trunk Key Operation: HOLD (pg. 3-15) FF3 0 BSSC 04 13 Hold (0 or 1) Hold
Trunk Key Operation: Multiple Call Pickup (pg. 3-15) FF3 0 BSSC 04 14 Hold (0 or 1) Hold
Trunk Key Operation: Brokers Hold (pg. 3-16) FF3 0 BSSC 04 15 Hold (0 or 1) Hold
DSS Trunk FF-Key: Outbound Call Restriction
(all CPCs) - Version 1.0 or higher
Allow/Restrict outbound calls on this Trunk/MCO/Virtual Port/DSS/BLF key.
FF4 1 BSSC 1 (01-72) Hold CONF (0 or 1) Hold
0=Allow outbound calls on this FF-key.BSSC: Attendant Port
B=Cabinet no. 1-6
SS=Card Slot no. 01-12
C=Circuit no. 1-801=FF1 key
02=FF2 key
03=FF3 key
...
72=FF72 key1=Do Not Allow outbound calls on this (default)
$
#-! %
FF-key.
$
()((((3 )#
(= HI)= HI
FF4: FF-Key/Soft Key Feature Assignment Section 400-Programming
Page 4-16
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
If
“Inbound Answer Restriction” is set to 1=Do Not Allow, the FF-key will still flash green for an
incoming CO or MCO call, although the user won’t be able to answer it.
Related Programming:
Notes:
Even if this address is set to 0=Do Not Ring (default), the user can still pick up the incoming call by
pressing the FF-key, as long as
“Inbound Answer Restriction” (pg. 4-16) is set to 0=Allow (default).
(all CPCs - Version 1.3 or higher) For DSS/BLF keys, if this address is set to 1=Ring, Auto-Answer will
apply; user simply picks up the handset to answer the incoming call on the DSS/BLF key.
Related Programming:
BLF Call Pickup (pg. 1-24) FF1 0 01 0006 Hold (0 or 1) Hold
DSS Trunk FF-Key: Inbound Answer Restriction
(all CPCs) - Version 1.0 or higher
Allow/Restrict the ability to answer incoming calls on this Trunk/MCO/Virtual Port/
DSS/BLF key.
FF4 1 BSSC 1 (01-72) Hold CONF Hold (0 or 1) Hold
0=Allow answering inbound calls onBSSC: Attendant Port
B=Cabinet no. 1-6
SS=Card Slot no. 01-12
C=Circuit no. 1-801=FF1 key
02=FF2 key
03=FF3 key
...
72=FF72 key1=Do Not Allow answering inbound this FF-key. (default)
$
! %
calls on this FF-key.
DSS Trunk FF-Key: Day1 Ringing
(all CPCs) - Version 1.0 or higher
Allow/Restrict phone ringing for an incoming call on this this Trunk/MCO/Virtual
Port/DSS/BLF key during Day1 mode.
FF4 1 BSSC 1 (01-72) Hold CONF Holdx2 (0 or 1) Hold
0=Do Not Ring inbound calls on thisBSSC: Attendant Port
B=Cabinet no. 1-6
SS=Card Slot no. 01-12
C=Circuit no. 1-801=FF1 key
02=FF2 key
03=FF3 key
...
72=FF72 key1=Ring inbound calls on this FF-key FF-key during Day1 mode. (default)
during Day1 mode.
$
/
Section 400-Programming FF4: FF-Key/Soft Key Feature Assignment
576-13-400 DBS 576 (USA) issued 05/20/98
l Page 4-17
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes: (same as Day1 Ringing - previous page)
Related Programming: (same as Day1 Ringing - previous page)
Notes: (same as Day1 Ringing - previous page)
Related Programming: (same as Day1 Ringing - previous page)
DSS Trunk FF-Key: Day2 Ringing
(all CPCs) - Version 1.0 or higher
Allow/Restrict phone ringing for an incoming call on this Trunk/MCO/Virtual Port/
DSS/BLF key during Day2 mode.
FF4 1 BSSC 1 (01-72) Hold CONF Holdx3 (0 or 1) Hold
0=Do Not Ring inbound calls on thisBSSC: Attendant Port
B=Cabinet no. 1-6
SS=Card Slot no. 01-12
C=Circuit no. 1-801=FF1 key
02=FF2 key
03=FF3 key
...
72=FF72 key
FF-key during Day2 mode. (default)
1=Ring inbound calls on this FF-key
during Day2 mode.
$
/
DSS Trunk FF-Key: Night Ringing
(all CPCs) - Version 1.0 or higher
Allow/Restrict phone ringing for an incoming call on this Trunk/MCO/Virtual Port/
DSS/BLF key during Night mode. Applies to DSS/72 consoles.
FF4 1 BSSC 1 (01-72) Hold CONF Holdx4 (0 or 1) Hold
0=Do Not Ring inbound calls on this BSSC: Attendant Port
B=Cabinet no. 1-6
SS=Card Slot no. 01-12
C=Circuit no. 1-801=FF1 key
02=FF2 key
03=FF3 key
...
72=FF72 key
FF-key during Night mode. (default)
1=Ring inbound calls on this FF-key
during Night mode.
$
)9 /
FF4: FF-Key/Soft Key Feature Assignment Section 400-Programming
Page 4-18
l DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0 System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
Notes:
Even if this is set to 1=Enabled, pressing ON/OFF will not pick up the call (user must pick up handset).
Related Programming:
BLF Call Pickup (pg. 1-24) FF1 0 01 0006 Hold (0 or 1) Hold
DSS Trunk FF-Key: No-Ring Auto Answer
(all CPCs) - Version 1.0 or higher
Allow/Restrict the ability to answer incoming calls that are blinking, but not ringing,
on this Trunk/MCO/Virtual Port/DSS/BLF key, simply by picking up the handset.
FF4 1 BSSC 1 (01-72) Hold CONF Holdx5 (0 or 1) Hold
BSSC: Attendant Port
B=Cabinet no. 1-6
SS=Card Slot no. 01-12
C=Circuit no. 1-801=FF1 key
02=FF2 key
03=FF3 key
...
72=FF72 key
$
)! /-! /)
0=Disabled; this address has no effect.
1=Enabled; pick up handset to answer call. (default)
(don’t have to press FF-key)