Home > Panasonic > Communications System > Panasonic Digital Business System 576 Technical Manual Section 400 Programming

Panasonic Digital Business System 576 Technical Manual Section 400 Programming

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Digital Business System 576 Technical Manual Section 400 Programming online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 664
    Add page 381 to Favourites
    image text
    Enable zoom 
    							Section 400-Programming FF2: Trunk Programming (T1 E&M Tie)
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 2-133
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
      
Notes:
Related Programming:
FF6 2 08: Tandem Exchange Table (pg. 6-45)
          
Day2 Ring Type
(all CPCs) - Version 1.0 or higher
Set ring type for incoming calls on the T1 channel during Day2 mode.
FF2   2   BSSCC    04   2   Hold   (0 or 1)   Hold
 
BSSCC:  T1 (E&M Tie) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-240=Tie Incoming.  (default)  Check digits
    and ring the extension or page.
1=Tandem.  Check digits based on
    Tandem Table.
  $
	
  %6
Not Used
(all CPCs) - Version 1.0 or higher
FF2   2   BSSCC    04   3   Hold
 
  $
	)! B
    Add page 382 to Favourites
    image text
    Enable zoom 
    							FF2: Trunk Programming (T1 E&M Tie) Section 400-Programming
Page 2-134
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
          
Notes:
Related Programming:
FF6 2 08: Tandem Exchange Table (pg. 6-45)
      
Night Ring Type
(all CPCs) - Version 1.0 or higher
Set ring type for incoming calls on the T1 channel during Night mode.
FF2   2   BSSCC    04   4   Hold   (0 or 1)   Hold
 
 
BSSCC: T1 (E&M Tie) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-240=Tie Incoming.  (default)  Check digits
    and ring the extension or page.
1=Tandem.  Check digits based on
    Tandem Table.
  $
	
)9  %6
Not Used
(all CPCs) - Version 1.0 or higher
FF2   2   BSSCC    04   5   Hold
 
  $

	)! B
    Add page 383 to Favourites
    image text
    Enable zoom 
    							Section 400-Programming FF2: Trunk Programming (T1 E&M Tie)
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 2-135
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
      
          
Notes:
Related Programming:
MOH Source for Tie-Lines (pg. 1-97)     FF1 0 13 (0001-0072) Hold (0-3) Hold
Not Used
(all CPCs) - Version 1.0 or higher
FF2   2   BSSCC    05   0   Hold
FF2   2   BSSCC    05   1   Hold
FF2   2   BSSCC    05   2   Hold
FF2   2   BSSCC    05   3   Hold
FF2   2   BSSCC    05   4   Hold
FF2   2   BSSCC    05   5   Hold
 
 
  $

	)! B
  $

	)! B
  $

	)! B
  $

	)! B
  $

	)! B
  $


	)! B
Tenant Group Assignment
(all CPCs) - Version 1.0 or higher
Assign the T1 channel to a Tenant Group, which will apply when the T1 
channel originates an outbound call (such as DISA).
FF2   2   BSSCC    06   Hold   (0-72)   Hold 
 
BSSCC:  T1 (E&M Tie) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
  $
 	
% 1!-6
Tenant Group No. --
with a CPC-96:
with a CPC-288:
with a CPC-576:
default:  0 [no assignment]Tenant Groups 01-12
Tenant Groups 01-36
Tenant Groups 01-72
    Add page 384 to Favourites
    image text
    Enable zoom 
    							FF2: Trunk Programming (T1 E&M Tie) Section 400-Programming
Page 2-136
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
          
Notes:
Related Programming:
FF6 1: TRS Class Definitions (pg. 6-15)
        
Notes:
Related Programming:
FF6 1: TRS Class Definitions (pg. 6-15)
TRS Class Assignment (Day)
(all CPCs) - Version 1.0 or higher
Assign a Toll Restriction Service (TRS) Class to the T1 channel, applicable during Day1 
and Day2 modes when the channel is the originator of an outbound call (such as DISA).
FF2   2   BSSCC    07   0   Hold   (1-50)   Hold 
 
TRS Class No. 1-50 for Day ModeBSSCC:  T1 (E&M Tie) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
default:  1
  $
%
	0 % 5
TRS Class Assignment (Night)
(all CPCs) - Version 1.0 or higher
Assign a Toll Restriction Service (TRS) Class to the T1 channel, applicable during Night 
mode when the channel is the originator of an outbound call (such as DISA).
FF2   2   BSSCC    07   1   Hold   (1-50)   Hold 
 
TRS Class No. 1-50 for Night ModeBSSCC:  T1 (E&M Tie) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
default:  1
  $
%	 )9 % 5
    Add page 385 to Favourites
    image text
    Enable zoom 
    							Section 400-Programming FF2: Trunk Programming (T1 E&M Tie)
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 2-137
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
        
Notes:
This 
Trunk COS 
Assignment controls the ring tone for incoming calls on this trunk - intercom ring 
tone (2 short beeps followed by 3 seconds of silence), or a specific ring pattern.  The Trunk COS also 
controls various tie-line network settings.  See 
FF1 0 04: Trunk COS Definitions (pg. 1-75). 
Related Programming:
Trunk COS: Incoming Ring Tone Source (pg. 1-75)     FF1 0 04 (00-15) 01 Hold (0 or 1) Hold
Trunk COS: Dial Tone to Tie-Line (pg. 1-76)     FF1 0 04 (00-15) 02 Hold (0 or 1) Hold
Trunk COS: Fast-Busy Tone to Tie-Line (pg. 1-77)     FF1 0 04 (00-15) 03 Hold (0 or 1) Hold
Trunk COS: Paging on DISA/Tie-Line Call (pg. 1-78)     FF1 0 04 (00-15) 05 Hold (0 or 1) Hold
Ring Pattern (pg. 2-122)     FF2 2 BSSCC 02 09 Hold (0-12) Hold
         
Notes:
Based on this setting, you can assign automatic volume adjustments for different connection types to 
this T1 channel (see FF1 8 02).
Related Programming:
Digital Pad Settings for Trunk Pad Class (pg. 1-178)     FF1 8 02 (0001-0480) Hold (0-31) Hold
Trunk COS Assignment
(all CPCs) - Version 1.0 or higher
Assign a Trunk Class of Service (COS) to the T1 channel.
FF2   2   BSSCC    08   Hold   (1-16)   Hold
 
 
Trunk Class of Service No. 1-16 BSSCC:  T1 (E&M Tie) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
default:  1
  $
 	%-4 #
Trunk Digital Pad Class Assignment
(all CPCs) - Version 1.0 or higher
Assign a Digital Pad Class to the T1 channel.
FF2   2   BSSCC    09   Hold   (1-16)   Hold
 
 
Trunk Digital Pad Class No. 1-16  BSSCC:  T1 (E&M Tie) Channel Position
B=Cabinet no. 1-6
SS=Slot no. 01-12
CC=Channel no. 01-24
default:  7
  $
& 	%%-4 $/ 5
    Add page 386 to Favourites
    image text
    Enable zoom 
    							FF2: Trunk Programming (T1 E&M Tie) Section 400-Programming
Page 2-138
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
    Add page 387 to Favourites
    image text
    Enable zoom 
    							576-13-400 DBS 576 (USA) issued 05/20/98     l     Page 3-1
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
3.  Extension Programming  (FF3)
Use the FF3 addresses in this chapter to set parameters for extensions in the 
DBS 576 phone system:
FF3 0: Digital Keyphones and SLTs
FF3 1: S-Point ISDN Extensions
FF3 2: Virtual Ports
FF3 3: RAI Extension Port
This chapter covers the following FF3 addresses:     
FF Key Address Topic Default Page
FF3 0: Digital Keyphones and SLTs3-3
FF3 0 BSSC 00 Hold (1-3) Hold Phone Type 1 (digitl.keyphone 
or SLT)3-3
FF3 0 BSSC 01 Hold (1-5) Hold Phone Version (Digital Keyphones) Auto detect 3-4
FF3 0 BSSC 02 Hold (0-9999) Hold Extension Number Assignment -- 3-4
FF3 0 BSSC 03 0 Hold (0 or 1) Hold SLT Hookflash 0 (Detect) 3-5
FF3 0 BSSC 03 1 Hold (0 or 1) Hold SLT Dial Type 1 (DTMF) 3-6
FF3 0 BSSC 03 2 Hold (0-3) Hold SLT On-Hook Detection Timer 1 (1008ms detect; 
112ms ignore)3-6
FF3 0 BSSC 03 3 Hold (0-3) Hold SLT Hookflash Timer 2 (208ms) 3-7
FF3 0 BSSC 03 4 Hold Not Used -- 3-7
FF3 0 BSSC 04 00 Hold (0 or 1) Hold Auto Answer (Handset) 1 (Enabled) 3-8
FF3 0 BSSC 04 01 Hold (0 or 1) Hold Ringing Line Preference (ON/OFF) 0 (Disabled) 3-8
FF3 0 BSSC 04 02 Hold (0 or 1) Hold Slide Ringing Receive 0 (Disabled) 3-9
FF3 0 BSSC 04 03 Hold (0 or 1) Hold Busy Override on Trunk Key 0 (Disabled) 3-9
FF3 0 BSSC 04 04 Hold (0 or 1) Hold Auto Camp-On Receive 0 (Disabled) 3-10
FF3 0 BSSC 04 05 Hold (0 or 1) Hold CO Off-Hook Signal 1 (Enabled) 3-10
FF3 0 BSSC 04 06 Hold (0 or 1) Hold SLT Voice Mail Connection 0 (Not VM port) 3-11
FF3 0 BSSC 04 07 Hold (0 or 1) Hold SLT Fixed Ring Pattern 0 (Different) 3-12
FF3 0 BSSC 04 08 Hold (0 or 1) Hold End-to-End Signaling 1 (Enabled) 3-12
FF3 0 BSSC 04 09 Hold (0 or 1) Hold Message Waiting LED 1 (Enabled) 3-13
FF3 0 BSSC 04 10 Hold (0 or 1) Hold Data Security 0 (Allow interrupt) 3-13
FF3 0 BSSC 04 11 Hold (0 or 1) Hold Large-LCD Fixed Menu Display During Idle 1 (Allowed) 3-14
FF3 0 BSSC 04 12 Hold (0 or 1) Hold Trunk Key Operation: Direct Calls 1 (Ignored) 3-14
FF3 0 BSSC 04 13 Hold (0 or 1) Hold Trunk Key Operation: HOLD 0 (Ignored) 3-15
FF3 0 BSSC 04 14 Hold (0 or 1) Hold Trunk Key Operation: Multiple Call Pickup 0 (Retrieved) 3-15
FF3 0 BSSC 04 15 Hold (0 or 1) Hold Trunk Key Operation: Brokers Hold 0 (Disabled) 3-16
FF3 0 BSSC 04 16 Hold (0 or 1) Hold System Mode Display 0 (Disabled) 3-17
FF3 0 BSSC 04 17 Hold (0 or 1) Hold Flash on PROG (Recall) 0 (Ignored) 3-17
FF3 0 BSSC 04 18 Hold (0 or 1) Hold Call Duration Display 0 (Enabled) 3-18
FF3 0 BSSC 04 19 Hold (0 or 1) Hold Ring Volume Control 1 (Separate) 3-18
FF3 0 BSSC 04 20 Hold (0 or 1) Hold Loop (AEC) Disconnect Signal for VM 0 (No signal) 3-19
    Add page 388 to Favourites
    image text
    Enable zoom 
    							FF3: Extension Programming Section 400-Programming
Page 3-2
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF3 0 BSSC 04 21 Hold (0 or 1) Hold Flash-Signal Control 0 (Flash to CO) 3-19
FF3 0 BSSC 04 22 Hold (0 or 1) Hold Variable Mode Release 0 (Release) 3-20
FF3 0 BSSC 04 23 Hold (0 or 1) Hold MCO Prime Line 0 (Disabled) 3-21
FF3 0 BSSC 04 24 Hold (0 or 1) Hold Forced Account Codes 0 (Not Forced) 3-21
FF3 0 BSSC 04 25 Hold (0 or 1) Hold Verified Account Codes 0 (Unverified) 3-22
FF3 0 BSSC 04 26 Hold Not Used -- 3-23
FF3 0 BSSC 04 27 Hold (0 or 1) Hold Hot Dial Pad 1 (Enabled) 3-23
FF3 0 BSSC 05 Hold (1-72) Hold Tenant Group Assignment 1 3-24
FF3 0 BSSC 06 0 Hold (1-50) Hold TRS Class Assignment (Day) 1 3-25
FF3 0 BSSC 06 1 Hold (1-50) Hold TRS Class Assignment (Night) 1 3-25
FF3 0 BSSC 07 Hold (1-16) Hold Extension COS Assignment 1 3-26
FF3 0 BSSC 08 Hold (1-8) Hold Extension Digital Pad Class Assignment 1 (Analog)
3 (Digital)3-26
FF3 0 BSSC 09 Hold (1 or 2) Hold Dial Plan Assignment 1 (Plan “A”) 3-27
FF3 1: S-Point ISDN Extensions3-28
FF3 1 BSSC 00 0 Hold (BSSC) Hold Common D-Channel Position -- 3-28
FF3 1 BSSC 00 1 Hold (1-127) Hold D-Channel Interface ID Code -- 3-29
FF3 1 BSSC 01 Hold (0-9999) Hold Extension Number Assignment -- 3-29
FF3 1 BSSC 02 00 Hold (0 or 1) Hold Connection Type 0 (Point-to-Point) 3-30
FF3 1 BSSC 02 01 Hold (0 or 1) Hold Passive Bus 0 (Short Loop) 3-30
FF3 1 BSSC 02 02 Hold (0 or 1) Hold Layer 1 Operate Mode 0 (Active) 3-31
FF3 1 BSSC 02 03 Hold Not Used -- 3-31
FF3 1 BSSC 03 00 Hold (0 or 1) Hold B-Channel Select 0 (Highest-no.’d) 3-32
FF3 1 BSSC 03 01 Hold (0 or 1) Hold B-Channel Numbering (Layer 3) 0 (Slot mapping) 3-32
FF3 1 BSSC 03 02 Hold (0 or 1) Hold Call ID Length 0 (1byte/BRI)
1 (2byte/PRI)3-33
FF3 1 BSSC 03 03 Hold (0 or 1) Hold Called Number Indication 0 (no indication) 3-34
FF3 1 BSSC 03 04 Hold (0 or 1) Hold Called Sub-Address Indication 0 (no indication) 3-34
FF3 1 BSSC 03 05 Hold Not Used -- 3-35
FF3 1 BSSC 03 06 Hold (0 or 1) Hold Progress Tone 1 (Send) 3-35
FF3 1 BSSC 03 07 Hold (0 or 1) Hold Data Security 0 (Off) 3-36
FF3 1 BSSC 04 Hold (1-72) Hold Tenant Group Assignment 1 3-36
FF3 1 BSSC 05 0 Hold (1-50) Hold TRS Class Assignment (Day) 1 3-37
FF3 1 BSSC 05 1 Hold (1-50) Hold TRS Class Assignment (Night) 1 3-38
FF3 1 BSSC 06 Hold (1-16) Hold Extension COS Assignment 1 3-38
FF3 1 BSSC 07 0 Hold (1-8) Hold Extension Digital Pad Class Assignment 5 3-39
FF3 1 BSSC 08 Hold (1 or 2) Hold Dial Plan Assignment 1 (Plan “A”) 3-39
FF3 2: Virtual Ports3-40
FF3 2 (001-576) 00 Hold (0-9999) Hold Extension Number Assignment -- 3-40
FF3 2 (001-576) 01 00 Hold (1-6) Hold Ring Frequency 1 (400/562Hz) 3-41
FF3 2 (001-576) 01 01 Hold (1-12) Hold Ring Pattern 1 (1on/3off) 3-42
FF3 2 (001-576) 02 Hold (1-72) Hold Tenant Group Assignment 1 3-43
FF3 2 (001-576) 03 Hold (1-16) Hold Extension COS Assignment 1 3-43
FF3 3: RAI Extension Port3-45
FF3 3 00 Hold (0-9999) Hold RAI Extension Number Assignment 699 3-45
FF3 3 01 Hold (1-72) Hold Tenant Group Assignment 1 3-45
FF3 3 02 Hold (1-16) Hold Extension COS Assignment 1 3-46
    Add page 389 to Favourites
    image text
    Enable zoom 
    							Section 400-Programming FF3: Extension Programming
576-13-400 DBS 576 (USA) issued 05/20/98
     l     Page 3-3
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
FF3  0:   Digital Keyphones and SLTs  
         
Notes:
The default setting “1=Digital Keyphone or SLT” is automatically detected by the system when the 
phone is plugged into the port.
DSS/72 consoles and EM/24 units require their own port, separate from the phone.  To match them to a 
phone, assign the same 
Extension Number (see next page) to both ports.
rThere is no limit on the number of EM/24s per phone system; but not more than one EM/24 unit per 
phone can be assigned.
rDSS/72 assignment is limited by the CPC used:
with a CPC-96: max. 12 DSS/72 consoles
with a CPC-288: max. 36 DSS/72 consoles
with a CPC-576: max. 72 DSS/72 consoles
DSS/72s and EM/24s can have Automatic BLF key assignments, if FF1 0 01 0020 is enabled first. See 
pg. 1-19 for more information.
Related Programming:
Extension Number Assignment (pg. 3-4)     FF3 0 BSSC 02 Hold (0-9999) Hold
Automatic BLF on DSS and EM/24 Units (pg. 1-19)     FF1 0 01 0020 Hold (0 or 1) Hold
Phone Type
(all CPCs) - Version 1.0 or higher
Define the type of phone at the extension port.
FF3   0   BSSC   00   Hold   (1-3)   Hold
 
 
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-81=Digital Keyphone or SLT  (default)
2=EM/24
3=DSS/72
  $

 	$9! %6
    Add page 390 to Favourites
    image text
    Enable zoom 
    							FF3: Extension Programming Section 400-Programming
Page 3-4
     l     DBS 576 (USA) issued 05/20/98 576-13-400
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appl ications
FF8Maintenance Introduction
Appe ndix  A
Appe ndix  B
FF1System
FF2Tr u n k s
FF3Extensions
FF4FF-/Soft Keys
FF5Groups
FF6TRS/ARS
0   System
Configuration
FF7Appli cations
FF8Maintenance Introduction
Appe ndix A
Appe ndix B
       
Notes:
These phone versions include digital keyphones, EM/24s, and DSS/72s.
Only Digital SLTs require this setting (set to “5”).   For VB-44 and VB-43 series phones (settings “1” 
thru “4”), the system will automatically detect the phone type when you re-plug the station cable.
If this address is set to “5” (Digital SLT) and a VB-43 or VB-44 series keyphone is later plugged into the 
station, you must reset this address to “1” thru “4”.
If an analog SLT phone is plugged in, this address will display a “0” setting for the station.
Related Programming:
        
Notes:
Press the BLK-DOWN soft key instead of the last HOLD in the above address, to scroll to the next 
BSSC extension port position and assign it an Extension Number (stay in same address).
Phone Version (Digital Keyphones)
(all CPCs) - Version 1.0 or higher
Define the version of the digital keyphone (if present) at the extension port.
FF3   0   BSSC   01   Hold   (1-5)   Hold
 
BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-81=Digital Keyphone
2=Digital Keyphone
3=Digital Keyphone
4=Digital Keyphone
5=Digital SLT
defaults:  (see Notes below)
  $
 	3%*5 %6
Extension Number Assignment
(all CPCs) - Version 1.0 or higher
Assign an extension number (0-9999) to the extension port.
FF3   0   BSSC   02   Hold   (0-9999)   Hold
 
 
Extension Number  (0-9999)BSSC: Extension Port
B=Cabinet no. 1-6
SS=Slot no. 01-12
C=Circuit no. 1-8default:  [no assignment]
  $
 	*:% )-8
(or BLK-DOWN)
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Digital Business System 576 Technical Manual Section 400 Programming