NEC Neax 2000 Ivs2 Ccis System Manual

							 NEAX2000 IVS2 CCIS System ManualPage iv  ND-70918 (E), Issue 1.0
TABLE OF CONTENTS
Page
CHAPTER 4 CIRCUIT CARD INFORMATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   259
HOW TO READ THIS CHAPTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   260
MOUNTING LOCATION OF CIRCUIT CARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   261
Circuit Card Mounting Slots  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261
LIST OF REQUIRED CARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   262
PN-CP14 (MP)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  263
PN-CP15 (FP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  268
PN-AP00-B (AP00) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  270
PN-24DTA-C (DTI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  276
PN-30DTC-A (DTI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  282
PN-SC00 (CCH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  288
PZ-M537 (EXPMEM)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  291
PZ-M542 (CONN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  294
PZ-M557 (CONN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  296
PN-2LDTA (LDT)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  298
PN-M10 (M10)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  299
PN-2ODTA (ODT). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  301
PN-2ODTB (ODT). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  302
CHAPTER 5 OPERATION TEST  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   303
LOOP-BACK TEST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   304
INTEROFFICE TRANSMISSION LINE TEST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   310
PLO OPERATION TEST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  313
Clock Signal Generation Test   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  313
Clock Signal Synchronization Test   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  314
Interoffice Synchronization Test   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  316
Source Office Mode Test  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316 
						

							LIST OF FIGURES
Figure TitlePage
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page v
Figure 1-1 No. 7 CCIS System Outline  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
Figure 1-2 Clock Supply Route  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
Figure 1-3 No. 7 CCIS with DTI   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
Figure 1-4 No. 7 CCIS with LDT/ODT  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
Figure 1-5 Centralized Billing   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9
Figure 1-6 Accommodation of DTI/CCH into TDSW  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  17
Figure 1-7 Time Slot Allocation for DTI  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Figure 1-8 CCH Time Slot Assignment (for No. 7 CCIS with Digital Interface)  . . . . . . . . . . . . . . .  20
Figure 1-9 CCH Time Slot Assignment (for No. 7 CCIS with Analog Interface)  . . . . . . . . . . . . . .  21
Figure 1-10 Frame Configuration of 24-DTI (12-Multi Frame)   . . . . . . . . . . . . . . . . . . . . . . . . . . . .  25
Figure 1-11 Frame Configuration of 24-DTI (24-Multi Frame)   . . . . . . . . . . . . . . . . . . . . . . . . . . . .  27
Figure 1-12 Frame Configuration of 30-DTI   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  30
Figure 1-13 Network Structuring  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  35
Figure 1-14 Example of Station Number (Closed Numbering)  . . . . . . . . . . . . . . . . . . . . . . . . . . . .  42
Figure 1-15 Example of Office Code and Station Number (Open Numbering)  . . . . . . . . . . . . . . . .  42
Figure 2-1 Static Electricity Guard   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  54
Figure 2-2 Static Electricity Guard   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  55
Figure 2-3 Installation Procedure for No. 7 CCIS with Digital Interface   . . . . . . . . . . . . . . . . . . . .  59
Figure 2-4 DTI Cable Connection via MDF  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  67
Figure 2-5 Location of the AP Slots and the LTC Connectors for DTI   . . . . . . . . . . . . . . . . . . . . .  68
Figure 2-6 Example of Cable Connection via MDF  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  69
Figure 2-7 DTI Cable Connection via CONN Card  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  70
Figure 2-8 Example of Cable Connection via the CONN Card  . . . . . . . . . . . . . . . . . . . . . . . . . . .  71
Figure 2-9 Outline of Optical Cable Connection  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  72
Figure 2-10 Example of MDF Cross Connection for M10 Card (1 of 2)   . . . . . . . . . . . . . . . . . . . . .  73
Figure 2-10  Example of MDF Cross Connection for M10 Card (2 of 2) . . . . . . . . . . . . . . . . . . . . . . 74
Figure 2-11 Installation Procedure for No. 7 CCIS with Analog Interface  . . . . . . . . . . . . . . . . . . . .  75
Figure 2-12 Cabling of RS NORM-4 CA-A/RS NORM-4S CA-A 
(for Common Signaling Data Link via MODEM)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   77
Figure 2-13 Cabling of LINE Cable (for Common Signaling Data Link via MODEM)  . . . . . . . . . . .  77
Figure 2-14 Cabling of RS NORM-4 CA-A/RS NORM-4S CA-A
(for Common Signalling Data Link via LDT/ODT)   . . . . . . . . . . . . . . . . . . . . . . . . . . . .   78
Figure 2-15 Location of the AP Slots and the LTC Connectors for CCH   . . . . . . . . . . . . . . . . . . . .  79
Figure 2-16 Cabling of LINE Cable (for Common Signalling Data Link via LDT/ODT)  . . . . . . . . . .  80
Figure 3-1 Programming Procedure (for No. 7 CCIS with Digital Interface)  . . . . . . . . . . . . . . . . .  83
Figure 3-2 Programming Procedure (for No. 7 CCIS with Analog Interface)   . . . . . . . . . . . . . . . .  108
Figure 4-1 Mounting Location  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  261
Figure 5-1 Loop-Back Test  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  304
Figure 5-2 Loop-Back Test Cable Connection (for Twisted-Pair Cable)  . . . . . . . . . . . . . . . . . . . .  305
Figure 5-3 Loop-Back Test Cable Connection (for Coaxial Cable)  . . . . . . . . . . . . . . . . . . . . . . . .  306 
						

							 NEAX2000 IVS2 CCIS System ManualPage vi  ND-70918 (E), Issue 1.0
LIST OF TABLES
Table TitlePage
Table 1-1 Card Name and Function    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13
Table 1-2 System Capacity for No. 7 CCIS with Digital Interface   . . . . . . . . . . . . . . . . . . . . . . . .  16
Table 1-3 System Capacity for No. 7 CCIS with Analog Interface  . . . . . . . . . . . . . . . . . . . . . . . .  16
Table 1-4 Number of Time Slots Required per DTI/CCH/AP00 Card 
(for No. 7 CCIS with Digital Interface)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   22
Table 1-5 Number of Time Slots Required per CCH/AP00 Card
(for No. 7 CCIS with Analog Interface)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   23
Table 1-6 Transmission Characteristics  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  24
Table 1-7 12-Multi Frame Bit Assignment   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  26
Table 1-8 24-Multi Frame Bit Assignment   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  28
Table 1-9 Time Slot Assignment of 30-DTI   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  31
Table 1-10 List of No. 7 CCIS Service Features     . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  32
Table 2-1 Required Equipment for No. 7 CCIS with Digital Interface   . . . . . . . . . . . . . . . . . . . . .  57
Table 2-2 Required Equipment and Cable for No. 7 CCIS with Analog Interface   . . . . . . . . . . . .  58
Table 4-1 List of Required Cards  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  262
Table 5-1 Alarm Indications on the 24DTI Card (Loop-Back Test)   . . . . . . . . . . . . . . . . . . . . . . .  307
Table 5-2 Alarm Indications on the 30DTI Card (Loop-Back Test)   . . . . . . . . . . . . . . . . . . . . . . .  308
Table 5-3 Alarm Indications on 24DTI (Interoffice Transmission Line Test)   . . . . . . . . . . . . . . . .  311
Table 5-4 Alarm Indications on 30DTI (Interoffice Transmission Line Test)   . . . . . . . . . . . . . . . .  312 
						

							Introduction
Purpose
NEAX2000 IVS2 Maintenance Manual   ND-70926 (E), Issue 1.0  Page 1
INTRODUCTION
PURPOSE
This manual explains the installation and programming procedure for providing No. 7 Common
Channel Inter-Office Signaling (No. 7 CCIS) system to the NEAX2000 IVS
2/NEAX7400 ICS
M100MX/NEAX2000 INTEGRATED VOICE SERVER.
OUTLINE OF THIS MANUAL
This manual consists of five chapters. The contents of CHAPTER 1 through 5 are outlined below.
CHAPTER 1 GENERAL INFORMATION
This chapter explains the system outline, the name and functions of circuit cards required,
system capacity, time slot assignment condition, system specifications, available service features
with No. 7 CCIS, and network structure conditions for CCIS system.
CHAPTER 2 INSTALLATION
This chapter explains the required equipment and installation procedure.
CHAPTER 3 SYSTEM DATA PROGRAMMING
This chapter explains the programming procedure for providing CCIS system, and also explains
the general description, programming procedure, operating procedure, and hardware
requirement of each service feature.
CHAPTER 4 CIRCUIT CARD INFORMATION
This chapter explains the mounting location, the meaning of lamp indications, and the method of
switch settings of each circuit card for the No. 7 CCIS system.
CHAPTER 5 OPERATION TEST
This chapter explains inter-office test procedure relating to the basic DTI functions. 
						

							 NEAX2000 IVS2 Maintenance ManualPage 2  ND-70926 (E), Issue 1.0
Introduction
Terms in This Manual
TERMS IN THIS MANUAL
Usually, PBX system is designated as “PBX” or “system”.
When we must distinguish between the PBX systems, they are designated as follows.
IVS: NEAX2000 IVS
2/NEAX7400 ICS M100MX/NEAX2000 INTEGRATED VOICE SERVER
IMX: NEAX2400 IMS (IMX)/NEAX7400 ICS M140MX or more/NEAX7400 IMX M240 or more
REFERENCE MANUAL
During installation, refer also to the manuals below:
Command Manual Describes Customer Administration Terminal (CAT)
operation, command function and setting data required for
programming the system, and Resident System Program.
Office Data Programming Manual Contains the Customer Specification Sheet and Office Data
Programming Sheet.
MATWorX Studio User’s Guide Describes the Maintenance Administration Terminal
(MATWorX Studio) program operation.
Maintenance Manual Describes maintenance service features and the
recommended trouble shooting procedure.
Installation Procedure Manual Describes the installation procedure for the PBX system. 
						

							NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 3
CHAPTER 1
GENERAL INFORMATION
This chapter explains the system outline, the name and functions of
circuit cards required, system capacity, time slot assignment
condition, system specifications, available service features with No. 7
CCIS, and network structure considerations for CCIS system. 
						

							 NEAX2000 IVS2 CCIS System ManualPage 4  ND-70918 (E), Issue 1.0
CHAPTER 1  GENERAL INFORMATION
System Outline
SYSTEM OUTLINE
The PBX can be interfaced with a Public Network or Tie Line Network by No. 7 CCIS Signaling.
For adding No. 7 CCIS to the system, it is necessary to install the 24/30 channel Digital Trunk
Interface (DTI) for a digital network or LDT (Loop Dial Trunk)/ODT (2 wire E&M or 4 wire E&M
Trunk) for an analog network via a MODEM, and a Phase Locked Oscillator (PLO) for network
synchronization. Also, it is necessary to install a Common Channel Handler (CCH). 
The CCH receives/transmits common signaling data from/to the distant office. In each local
office, the PBX can provide Centralized Billing function in addition to a variety of inter-office
service features.
NOTE:Centralized Day/Night Mode Change, Centralized MAT and Number Portability feature
require CCIS No. 7 networking with the IMX.
For addition of the Centralized Billing function, an Application Processor (AP) or Built-in SMDR
of MP card (for Local Office only) is required. Figure 1-1 shows the system outline of No. 7 CCIS
for the PBX.
Figure 1-1  No. 7 CCIS System Outline
PBX
24/30 CH24/30 CHANNEL PCM 
DIGITAL LINE 
CLOCK SIGNAL DTI
MP 
(PLO)MP 
(PLO) DIGITAL 
PBX
CCH
AP
DTI
DTI : 24/30 Channel Digital Trunk Interface CCH: Common Channel Handler
PLO : Phase Locked Oscillator AP : Application Processor for Centralized Billing
CCH 
						

							CHAPTER 1  GENERAL INFORMATION
System Outline
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 5
DTI
The Digital Trunk Interface (DTI) interfaces the PBX directly to a 24/30 channel PCM
transmission line. The DTI has the following functions.
For 24-DTI:
 Unipolar/Bipolar Conversion (AMI Format/B8ZS Format)
 Signaling Insertion/Extraction
 Alarm Detection/Insertion
 Digital PAD on Voice Signal Transmission
 Loop-Back Test (Local/Remote Loop Back)
 Cyclic Redundancy Checking (based on ITU-T Rec. G704)
For 30-DTI:
 Unipolar/Bipolar Conversion (HDB3 Format)
 Signaling Insertion/Extraction
 Alarm Detection/Insertion
 Digital PAD on Voice Signal Transmission
 Cyclic Redundancy Checking (based on ITU-T Rec. G704)
 Channel Associated Signaling (based on ITU-T Rec. 0421 Digital R2 Signaling Code)
For connection of a 24-DTI and transmission line, twisted-pair cables are used, and for
connection of a 30-DTI and transmission line, twisted-pair cables or coaxial cables are used.
CCH
The Common Channel Handler (CCH) card provides a common channel signal through the DTI
to a No. 7 CCIS network, and it is responsible for signaling between the PBX and the No. 7 CCIS
network under control of the MP. 
						

							 NEAX2000 IVS2 CCIS System ManualPage 6  ND-70918 (E), Issue 1.0
CHAPTER 1  GENERAL INFORMATION
System Outline
PLO
The Phase Locked Oscillator (PLO) is responsible for providing synchronization between the
TDSW and another office. In this system, the internal PLO equipped with the MP card is used.
The PLO generates a synchronized clock signal according to the source clock signals supplied
from the source office within the network, and supplies the generated clock signal to the TDSW.
The PLO is supplied with clock signals extracted from the DTI. The PLO can be equipped with
two clock supply routes; one is the route from the source office, and the other is a standby route
from a sub-source office. When no clock signals from the source and the sub-source office arrive
due to a transmission line failure, the PLO keeps generating the clock signals in phase with the
previous source clock.
Figure 1-2 shows an example of clock supply route configuration.
Figure 1-2  Clock Supply Route
PLO
TDSW SOURCE OFFICE
~
SOURCE
CLOCK
RECEIVER/LOCAL-RECEIVER OFFICE
PBX
DTI
DTI TDSW
RECEIVER OFFICE
DTI
DTI
DTI TDSW
SUB-SOURCE OFFICE
PLO
DTI
DTI
DTI
TDSW
DTI
DTI
PLO
PLO:DIRECTION OF CLOCK
SIGNAL SUPPLY 
						

							CHAPTER 1  GENERAL INFORMATION
System Outline
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 7
No. 7 CCIS
The PBX can provide No. 7 CCIS via either a digital network or an analog network. Regardless
of the relevant network being a digital network or an analog network, CCH (Common Channel
Handler) to control the common signaling channel is required.
DIGITAL NETWORK
When No. 7 CCIS is provided via a digital network, the CCH is connected to the DTI by a fixed
path in the TDSW and transmits/receives common signaling data to/from the distant office
through a predetermined channel. Voice signals are transmitted/received on each line basis
through other channels. 
Figure 1-3 shows the system configuration of No. 7 CCIS provided via a digital network.
Figure 1-3  No. 7 CCIS with DTI
TDSW DIGITAL PBX
DTI
24/30 CHANNEL PCM
DIGITAL LINE
DTI
CCH
TDSWPBX
DTI : 24/30 Channel Digital Trunk Interface
CCH : Common Channel Handler
PLO : Phase Locked Oscillator
MP
(PLO)MP
(PLO)
CCH