NEC Neax 2000 Ivs2 Ccis System Manual
Have a look at the manual NEC Neax 2000 Ivs2 Ccis System Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NEAX2000 IVS2 CCIS System ManualPage 98 ND-70918 (E), Issue 1.0 CHAPTER 3 SYSTEM DATA PROGRAMMING No. 7 CCIS With Digital Interface Example of No. 7 CCIS with Digital Interface (1) For open numbering system CCH CIC=1 CIC=2 TRK000 TRK001 TRK002CIC=2 RT1131xx CCH0 CIC=1 CCIS CH0RT10 32xx TRK003 TRK004 TRK005CIC=2 RT13 CCH1 CIC=1 CCIS CH1RT12 21xx CCH CIC=1 CIC=2 34xx35xx OFFICE CPC: 00020 OFFICE NO.: 825 DTI1 DTI0 OFFICE A PC: 00001 OFFICE NO.: 820OFFICE B PC: 00010 OFFICE NO.: 822 CONDITIONS: Open Numbering (4-digit Station No.) Centralized Billing: Not provided AP No. of DTI, CCH on OFFICE A: EXAMPLE DTI0 : 04 DTI1 : 05 CCH0: 06 CCH1: 07
CHAPTER 3 SYSTEM DATA PROGRAMMING No. 7 CCIS With Digital Interface NEAX2000 IVS2 CCIS System Manual ND-70918 (E), Issue 1.0 Page 99 For office A, the following programming is required: (1) Assign the DTI card. (2) Assign a trunk number to the required DTI channels. (3) Assign DTI card parameters. (These data assignments are only for 24-DTI card.) (4) Assign a trunk route number to the DTI trunks. Command Code 1st Data 2nd Data 05 Y=0 04 09 : DTI0 05 09 : DTI1 05 Y=1 04 1 : Basic Highway channel 05 1 : Basic Highway channel Command Code 1st Data 2nd Data 07 YY=01 0400 D000 : TRK000 0401 D001 : TRK001 0402 D002 : TRK002 (Common Signaling Channel) 0500 D003 : TRK003 0501 D004 : TRK004 0502 D005 : TRK005 (Common Signaling Channel) Command Code 1st Data 2nd Data AA YY=00 04 0 05 0 AA YY=01 04 0/1 05 0/1 AA YY=02 04 0/1 05 0/1 AA YY=03 04 7 05 7 Command Code 1st Data 2nd Data 30 YY=00 000 10 : RT10 : RT11 : RT12 : RT13 001 10 002 11 003 12 004 12 005 13 For 24 DTA-C only
NEAX2000 IVS2 CCIS System ManualPage 100 ND-70918 (E), Issue 1.0 CHAPTER 3 SYSTEM DATA PROGRAMMING No. 7 CCIS With Digital Interface (5) Assign trunk route data (6) Assign CCH card Command Code 1st Data 2nd Data 35 YY=00 10 04 Tie Line Route Assignment 11 04 12 04 13 04 35 YY=01 10 7 Dialing Signal Type 11 7 12 7 13 7 35 YY=04 10 2 Answer Signal 11 2 12 2 13 2 35 YY=05 10 1 Release Signal 11 1 12 1 13 1 35 YY=09 10 03 Incoming Connection Signal 11 03 12 03 13 03 35 YY=19 10 0-7 DTI Pad Pattern Assignment 2nd data varies depending on the Level Diagram in the network. 11 0-7 12 0-7 13 0-7 35 YY=20 10 00 Sender Start Condition 11 00 12 00 13 00 35 YY=90 10 0 No. 7 CCIS facilities assignment 11 0 12 0 13 0 Command Code 1st Data 2nd Data 05 Y=0 06 11 : CCH0 07 11 : CCH1
CHAPTER 3 SYSTEM DATA PROGRAMMING No. 7 CCIS With Digital Interface NEAX2000 IVS2 CCIS System Manual ND-70918 (E), Issue 1.0 Page 101 (7) Assign CCIS channel number to each CCH (8) Provide the system with No. 7 CCIS (9) Assign CCIS channel number to each route (10) Assign a CIC number to each voice channel trunk. (11) Assign CCIS channel data. Command Code 1st Data 2nd Data 06 YY=07 0 06 : CCIS Channel 0 1 07 : CCIS Channel 1 Command Code 1st Data 2nd Data 09 53 0 Command Code 1st Data 2nd Data 35 YY=91 10 0 : CCIS Channel 0 11 0 12 1 : CCIS Channel 1 13 1 Command Code 1st Data 2nd Data 30 YY=35 000 001 : CIC1 001 002 : CIC2 003 001 : CIC1 004 002 : CIC2 Command Code 1st Data 2nd Data A7 YY=00 0 002 Common Signaling Channel Assignment 1 005 A7 YY=01 0 00001 Originating Point Code Assignment 1 00001 A7 YY=02 0 00010 Destination Point Code Assignment 1 00020 A7 YY=06 0 820 Office Number Assignment 1 820 A8 00010 0 Destination Point Code to which a signaling message is transferred. 00020 1
NEAX2000 IVS2 CCIS System ManualPage 102 ND-70918 (E), Issue 1.0 CHAPTER 3 SYSTEM DATA PROGRAMMING No. 7 CCIS With Digital Interface (12) Assign route access data. NOTE:This example shows Second Dial tone will be heard only after 8 is dialed. 8 will be added and sent to Distant PBX. Command Code 1st Data 2nd Data 20 Y=0 8 A126 : Access Code=8 8A YYYY=A000 0 4005 : Area Code Development Pattern No. 5 8A YYYY=4005 22 0000 : Route Pattern 0000 25 0001 : Route Pattern 0001 8A YYYY=0000 1 00010 : Trunk Route 10 8A YYYY=0001 1 00012 : Trunk Route 12 8A YYYY=5000 100 9000 : Digit Addition Pattern No. 00 8A YYYY=9000 0 8 : Addition of digit “8”. 85 Y=5 22 07 Maximum number of digits dialed is 7 25 07 8 22 XXXX...XX Station numbers in Distant PBX. Office number of Distant PBX. LCR Access Code
CHAPTER 3 SYSTEM DATA PROGRAMMING
No. 7 CCIS With Digital Interface
NEAX2000 IVS2 CCIS System Manual
ND-70918 (E), Issue 1.0 Page 103
(2) For closed numbering system
EXAMPLE
OFFICE A PC: 00001
OFFICE NO.: 21
21xxOFFICE B PC: 00010
OFFICE NO.: 22
DTI0
TRK000
TRK001
TRK002
CCH0
DTI1
TRK003
TRK004
TRK005
CCH1CIC=1
CIC=2
CCIS CH0
CIC=1
CIC=2
CCIS CH1RT10
RT11
RT12
RT13CIC=1
CIC=2
CCH
CIC=1
CIC=2
CCH22xx
OFFICE C
25xx PC: 00020
OFFICE NO .: 25
CONDITIONS:
Closed Numbering (4-digit Station number)
Centralized Billing: Not provided
AP number of DTI, CCH on OFFICE A:
DTI0 : 04
DTI1 : 05
CCH0: 06
CCH1: 07
NEAX2000 IVS2 CCIS System ManualPage 104 ND-70918 (E), Issue 1.0 CHAPTER 3 SYSTEM DATA PROGRAMMING No. 7 CCIS With Digital Interface For office A, the following programming is required: (1) Assign the DTI card. (2) Assign a trunk number to the required DTI channels. (3) Assign DTI card parameters. (These data assignments are only for 24-DTI card.) (4) Assign a trunk route number to the DTI trunks. Command Code 1st Data 2nd Data 05 Y=0 04 09 : DTI0 05 09 : DTI1 05 Y=1 04 1 : Basic Highway channel 05 1 : Basic Highway channel Command Code 1st Data 2nd Data 07 YY=01 0400 D000 : TRK000 0401 D001 : TRK001 0402 D002 : TRK002 (Common Signaling Channel) 0500 D003 : TRK003 0501 D004 : TRK004 0502 D005 : TRK005 (Common Signaling Channel) Command Code 1st Data 2nd Data AA YY=00 04 0 05 0 AA YY=01 04 0/1 05 0/1 AA YY=02 04 0/1 05 0/1 AA YY=03 04 7 05 7 Command Code 1st Data 2nd Data 30 YY=00 000 10 : RT10 001 10 002 11 : RT11 003 12 : RT12 004 12 005 13 : RT13 For 24 DTA-C only
CHAPTER 3 SYSTEM DATA PROGRAMMING No. 7 CCIS With Digital Interface NEAX2000 IVS2 CCIS System Manual ND-70918 (E), Issue 1.0 Page 105 (5) Assign trunk route data. (6) Assign CCH card. Command Code 1st Data 2nd Data 35 YY=00 10 04 Tie Line Route Assignment 11 04 12 04 13 04 35 YY=01 10 7 Dialing Signal Type 11 7 12 7 13 7 35 YY=04 10 2 Answer Signal 11 2 12 2 13 2 35 YY=05 10 1 Release Signal 11 1 12 1 13 1 35 YY=09 10 03 Incoming Connection Signal 11 03 12 03 13 03 35 YY=19 10 0-7 DTI Pad Pattern Assignment 2nd data varies depending on the Level Diagram in the network. 11 0-7 12 0-7 13 0-7 35 YY=20 10 00 Sender Start Condition 11 00 12 00 13 00 35 YY=90 10 0 No. 7 CCIS facilities assignment 11 0 12 0 13 0 Command Code 1st Data 2nd Data 05 Y=0 06 11 : CCH0 07 11 : CCH1
NEAX2000 IVS2 CCIS System ManualPage 106 ND-70918 (E), Issue 1.0 CHAPTER 3 SYSTEM DATA PROGRAMMING No. 7 CCIS With Digital Interface (7) Assign CCIS channel number to each CCH. (8) Provide the system with No. 7 CCIS. (9) Assign CCIS channel number to each route. (10) Assign a CIC number to each voice channel trunk. (11) Assign CCIS channel data. Command Code 1st Data 2nd Data 06 YY=07 0 06 : CCIS Channel 0 1 07 : CCIS Channel 1 Command Code 1st Data 2nd Data 35 YY=09 53 0 Command Code 1st Data 2nd Data 35 YY=91 10 0 : CCIS Channel 0 11 0 12 1 : CCIS Channel 1 13 1 Command Code 1st Data 2nd Data 30 YY=35 000 001 : CIC1 001 002 : CIC2 003 001 : CIC1 004 002 : CIC2 Command Code 1st Data 2nd Data A7 YY=00 0 002 Common Signaling Channel Assignment 1 005 A7 YY=01 0 00001 Originating Point Code Assignment 1 00001 A7 YY=02 0 00010 Destination Point Code Assignment 1 00020 A8 00010 0 Destination Point Code to which a signaling message is transferred. 00020 1
CHAPTER 3 SYSTEM DATA PROGRAMMING No. 7 CCIS With Digital Interface NEAX2000 IVS2 CCIS System Manual ND-70918 (E), Issue 1.0 Page 107 (12) Assign route access data. NOTE:This example shows No second dial tone will be heard. No digits will be added. Command Code 1st Data 2nd Data 20 Y=0 22 A129 : Access Code=22 20 Y=0 25 A129 : Access Code=25 8A YYYY=A000 3 4007 : Area Code Development Pattern No. 5 8A YYYY=4007 22 0000 : Route Pattern 000 (22XX) 25 0001 : Route Pattern 001 (25XX) 8A YYYY=0000 1 00010 : Route 10 access by 22XX 8A YYYY=0001 1 00012 : Route 12 access by 25XX 20 Y=0 21 804 : 4 digits station (for Originating Station No.) 85 Y=7 22 04 Maximum number of digits dialed is 4. 25 04 22 XX Station numbers in Office B. 25 XX Station numbers in Office C.