NEC Neax 2000 Ivs2 Ccis System Manual
Have a look at the manual NEC Neax 2000 Ivs2 Ccis System Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NEAX2000 IVS2 CCIS System ManualPage 168 ND-70918 (E), Issue 1.0 CHAPTER 3 SYSTEM DATA PROGRAMMING Centralized Billing-CCIS Centralized Billing Programming Steps for Pattern 1 Local Office A, B uses AP00. CENTER OFFICE LOCAL OFFICE A/B CM05 Y=0>XX : 04 (AP00) 04 (AP00) CMD101>0000 : CCC (Data All Clear) CCC CMD001>179 : 1 (Center Office) 0 (Local Office) CMD003>24 >26 >29: 0 (Not record) : 0 (400) : No. of call record for SMDR 0 (400)Desired setting No. of call record Local Office (400) Desired setting (400) CMD102>0000 : CCC CCC CM08>800 >368 >378: 1 (AP00) : 0 (Center Office) : 1 (Not Local Office)1 1 (Local Office) 0 (Not Center Office) CMA7 YY=03>0 : 1 (Distant Office is Local Office) 0 (Distant Office is Center Office) =04>0 : NONE Point Code of Center Office CMD000>76 : 1 (Tandem Call through CCIS) 1 (Default or desired setting) CMD001>239 >20 >21 >22 >23 >80 >81 >82 >84 >85 >86: 1 (SMDR 0) : Data Bit (Por t 0) : Stop Bit (Por t 0) : Data Length (Port 0) : Parity (Port 0) : 4 (SMDR 0) : 0 (Priority) : 3 (2400 Format) : 1 (Free Wheel) : 48 (SA) : 33 (UA)0 (Not Centralized Billing Office) Default Default Default Default Default Default Default Default Default Default CMD015>XXXX : XX (Station Class No.) XX (Station Class No.) CMD016>XX31 >XX32 >XX58 >XX16 >XX17 XX21 XX30: 1 (C.O. through CCIS) : 1 (Tie through CCIS) : 1 (IC through CCIS if needed) : 1 (SMDR 0) : 0 : 1 (Tie outgoing) : 1 (CO/Tie incoming)1 1 1 1 0 1 (Tie outgoing) 1 (CO/Tie incoming) CMD000>70 >77 >79: 1 : 1 : 11 1 1 CMD027>0000~0009>9 (Send to SMDR) CMD034>0000~0009>11 (Local call)CMD027>0000~0009>9 (Send to SMDR) CMD034>0000~0009>11 (Local call)
CHAPTER 3 SYSTEM DATA PROGRAMMING Centralized Billing-CCIS NEAX2000 IVS2 CCIS System Manual ND-70918 (E), Issue 1.0 Page 169 Centralized Billing Programming Steps for Pattern 2 SMDR 1 Using Port 0 Local Office A, B uses AP00. CENTER OFFICE LOCAL OFFICE A/B CM05 Y=0>XX : 04 (AP00) 04 (AP00) CMD101>0000 : CCC (Data All Clear) CCC CMD001>179 : 1 (Center Office) 0 (Local Office) CMD003>24 >26 >29: No. of call record for SMDR 1 : 0 (Not record) : 0 (Not record)Desired setting No. of call record Local Office Desired setting CMD102>0000 : CCC CCC CM08>800 >368 >378: 1 (AP00) : 0 (Center Office) : 1 (Not Local Office)1 1 (Local Office) 0 (Not Center Office) CMA7 YY=03>0 : 1 (Distant Office is Local Office) 0 (Distant Office is Center Office) =04>0 : NONE Point Code of Center Office CMD000>76 : 1 (Tandem Call through CCIS) 1 (Default or desired setting) CMD001>239 >20 >21 >22 >23 >80 >81 >82 >84 >85 >86: 2 (SMDR 1) : Data Speed (Por t 0) : Stop Bit (Por t 0) : Data Length (Port 0) : Parity (Port 0) : 5 (SMDR 1) : 0 (Priority) : 3 (2400 Format) : 1 (Free Wheel) : 48 (SA) : 33 (UA)0 (Not Centralized Billing Office) Default Default Default Default Default Default Default Default Default Default CMD015>XXXX : XX (Station Class No.) XX (Station Class No.) CMD016>XX31 >XX32 >XX58 >XX16 >XX17 >XX22 >XX55: 1 (C.O. through CCIS) : 1 (Tie through CCIS) : 1 (IC through CCIS if needed) : 0 : 1 (SMDR 1) : 1 (Tie outgoing) : 1 (CO/Tie incoming)1 1 1 Desired setting Desired setting 1 (Tie outgoing) 1 (CO/Tie incoming) CMD000>70 >77 >79: Desired setting : Desired setting : Desired settingDesired setting Desired setting Desired setting CMD027>0000~0009>9 (Send to SMDR) CMD034>0000~0009>11 (Local call)CMD027>0000~0009>9 (Send to SMDR) CMD034>0000~0009>11 (Local call)
NEAX2000 IVS2 CCIS System ManualPage 170 ND-70918 (E), Issue 1.0 CHAPTER 3 SYSTEM DATA PROGRAMMING Centralized Billing-CCIS Centralized Billing Programming Steps for Pattern 3 To SMDR 0: Setting of billing information from Local Offices. To SMDR 1: Setting of billing information from Center Office. Use two SMDR terminals, one for Por t 0 and one for Por t 1. CENTER OFFICELOCAL OFFICE A/B CM05 Y=0>XX : 04 (AP00) 04 (AP00) CMD101>0000 : CCC (Data All Clear) CCC CMD001>179 : 1 (Center Office) 0 (Local Office) CMD003>24 >26 >29: No. of call record for SMDR 1 (400) : 0 (Not record) : 0 (Not record) (400)Desired setting No. of call record Local Office (400) Desired setting (400) CMD102>0000 : CCC CCC CM08>800 >368 >378: 1 (AP00) : 0 (Center Office) : 1 (Not Local Office)1 1 (Local Office) 0 (Not Center Office) CMA7 YY=03>0 : 1 (Distant Office is Local Office) 0 (Distant Office is Center Office) =04>0 : NONE Point Code of Center Office CMD000>76 : 1 (Tandem Call through CCIS) 1 (Default or desired setting) CMD001>239 >20 >21 >22 >23 >24 >25 >26 >27 >80 >81 >82 >84 >85 >86 >100 >101 >102: 1 (SMDR 0) : Data Speed (Por t 0) : Stop Bit (Por t 0) : Data Length (Port 0) : Parity (Port 0) : Data Speed (Por t 1) : Stop Bit (Por t 1) : Data Length (Port 1) : Parity (Port 1) : 4 (SMDR 0) (Port 0) : 0 (Priority) (Port 0) : 3 (2400 Format) (Port 0) : 1 (Free Wheel) (Port 0) : 48 (SA) (Port 0) : 33 (UA) (Port 0) : 5 (SMDR 1) (Port 1) : 0 (Priority) (Port 1) : 3 (2400 Format) (Port 1)0 (Not Centralized Billing Office) Default Default Default Default Default Default Default Default Default Default Default Default Default Default Default Default Default
CHAPTER 3 SYSTEM DATA PROGRAMMING Centralized Billing-CCIS NEAX2000 IVS2 CCIS System Manual ND-70918 (E), Issue 1.0 Page 171 CENTER OFFICE LOCAL OFFICE A/B CMD001>104 >105 >106: 1 (Free Wheel) (Port 1) : 48 (SA) (Port 1) : 33 (UA) (Port 1)Default Default Default CMD015>XXXX : XX (Station Class No.) XX (Station Class No.) CMD016>XX31 >XX32 >XX58 >XX16 >XX17: 1 (C.O. through CCIS) : 1 (Tie through CCIS) : 1 (IC through CCIS if needed) : 1 (SMDR 0) : 1 (SMDR 1)1 1 1 1 (Desired setting) 1 (Desired setting) CMD000>70 >77 >79: 1 (Desired setting) : 1 (Desired setting) : 1 (Desired setting)1 (Desired setting) 1 (Desired setting) 1 (Desired setting)
NEAX2000 IVS2 CCIS System ManualPage 172 ND-70918 (E), Issue 1.0 CHAPTER 3 SYSTEM DATA PROGRAMMING Centralized Billing-CCIS Centralized Billing Programming Steps for Pattern 4 To SMDR 0: Setting of billing information from Local Offices. To SMDR 1: Setting of billing information from Center Office. Use two SMDR terminals, one for Por t 0 and one for Por t 1. CENTER OFFICE LOCAL OFFICE A/B CM05 Y=0>XX : 04 (AP00) 04 (AP00) CMD101>0000 : CCC (Data All Clear) CCC CMD001>179 : 1 (Center Office) 0 (Local Office) CMD003>24 >26 >29: No. of call record for SMDR 1 : 0 (Not record) : 0 (Not record)Desired setting No. of call record Local Office Desired setting CMD102>0000 : CCC CCC CM08>800 >368 >378: 1 (AP00) : 0 (Center Office) : 1 (Not Local Office)1 1 (Local Office) 0 (Not Center Office) CMA7 YY=03>0 : 1 (Distant Office is Local Office) 0 (Distant Office is Center Office) =04>0 : NONE Point Code of Center Office CMD000>76 : 1 (Tandem Call through CCIS) Default or desired setting CMD001>239 >20 >21 >22 >23 >24 >25 >26 >27 >80 >81 >82 >84 >85 >86 >100 >101 >102: 2 (SMDR 1) : Data Speed (Por t 0) : Stop Bit (Por t 0) : Data Length (Port 0) : Parity (Port 0) : Data Speed (Por t 1) : Stop Bit (Por t 1) : Data Length (Port 1) : Parity (Port 1) : 4 (SMDR 0) (Port 0) : 0 (Priority) (Port 0) : 3 (2400 Format) (Port 0) : 1 (Free Wheel) (Port 0) : 48 (SA) (Port 0) : 33 (UA) (Port 0) : 5 (SMDR 1) (Port 1) : 0 (Priority) (Port 1) : 3 (2400 Format) (Port 1)0 (Not Centralized Billing Office) Default Default Default Default Default Default Default Default Default Default Default Default Default Default Default Default Default
CHAPTER 3 SYSTEM DATA PROGRAMMING Centralized Billing-CCIS NEAX2000 IVS2 CCIS System Manual ND-70918 (E), Issue 1.0 Page 173 CENTER OFFICE LOCAL OFFICE A/B CMD001>104 >105 >106: 1 (Free Wheel) (Port 1) : 48 (SA) (Port 1) : 33 (UA) (Port 1)Default Default Default CMD015>XXXX : XX (Station Class No.) XX (Station Class No.) CMD016>XX31 >XX32 >XX58 >XX16 >XX17: 1 (C.O. through CCIS) : 1 (Tie through CCIS) : 1 (IC through CCIS if needed) : 1 (SMDR 0) : 1 (SMDR 1)1 1 1 Desired setting Desired setting CMD000>70 >77 >79: 1 (Desired setting) : 1 (Desired setting) : 1 (Desired setting)1 (Desired setting) 1 (Desired setting) 1 (Desired setting)
NEAX2000 IVS2 CCIS System ManualPage 174 ND-70918 (E), Issue 1.0 CHAPTER 3 SYSTEM DATA PROGRAMMING Centralized Billing-CCIS Example 2: Data Assignment of SMDR Call Record on a Tandem Call through CCIS To provide one SMDR call record showing the office number and the station that made the call in Office A. Data Assignment of Office B CM08>040: 0 (Provides SMDR service for tandem calls) CM08>377: 0 (Provides office number and station number from the tandem office) CM35 YY=14>C.O. Route No.: 1 (To provide) CMD000>76: 1 (To send) CMD000>79: 0 (Only outgoing call information) Data Assignment of Office A CM35 YY=14>CCIS Route No.: 0 (Not provided) CMA7 YY=06>CCH No.: 0000-9999(Originating Office Number) Data Assignment of Office A ARTD CDN 10>CCIS Route No.: 0 C.O. SMDR Terminal Office A 2000IVS 2/IMX Office B 2000IVS2CCIS
CHAPTER 3 SYSTEM DATA PROGRAMMING Centralized Billing-CCIS NEAX2000 IVS2 CCIS System Manual ND-70918 (E), Issue 1.0 Page 175 To provide Tandem Centralized Billing without AP00 in the Local Office Data Assignment of Office A CM08>040: 0 (Provides SMDR service for tandem calls) CM08>377: 0 (Provides office number and station number from the tandem office) CM35 YY=14>C.O. Route No.: 0 (Not provided) CMD000>76: 1 (To send) CMD000>79: 0 (Only outgoing call information) Data Assignment of Office A ARTD CDN 10>CCIS Route No.: 0 ARTD CDN 16>CCIS Route No.: 0 Data Assignment of Office B CM08>378: 1 (Not provided) Do not install or program AP00 C.O. SMDR Terminal Office A Office B 2000IVS22000IVS2/IMX
NEAX2000 IVS2 CCIS System ManualPage 176 ND-70918 (E), Issue 1.0 CHAPTER 3 SYSTEM DATA PROGRAMMING Centralized Billing-CCIS Example 3: Data Assignment of CMA7 YY=03, 04 Data Assignment of Office A Data Assignment of Office B Command Code 1st Data 2nd Data Remarks CMA7 YY=03 CMA7 YY=040 00 00003To Center Office Command Code 1st Data 2nd Data Remarks CMA7 YY=03 CMA7 YY=040 01 00003To Local Office CMA7 YY=03 CMA7 YY=041 10 00003To Center Office OFFICE AOFFICE BOFFICE C CCH0 CCH0 CCH1 SMDR PC: 00001 OFFICE NO.: 821PC: 00002 OFFICE NO.: 822PC: 00003 OFFICE NO.: 823 PC : Point Code CCH: Common Channel Handler
CHAPTER 3 SYSTEM DATA PROGRAMMING Centralized Billing-CCIS NEAX2000 IVS2 CCIS System Manual ND-70918 (E), Issue 1.0 Page 177 Example 4: Data Assignment of CMA7 YY=06 and CMD004>55 Data Assignment of Office A Data Assignment of Office B Command Code 1st Data 2nd Data Remarks CMA7 YY=06 CMD0040 55821 821When using Built-in SMDR When using AP00 Command Code 1st Data 2nd Data Remarks CMA7 YY=06 CMA7 YY=060 1822 822When using Built-in SMDR CMD004 55 822 When using AP00 OFFICE AOFFICE BOFFICE C CCH0 CCH0 CCH1 SMDR PC: 00001 OFFICE NO.: 821PC: 00002 OFFICE NO.: 822PC: 00003 OFFICE NO.: 823 PC : Point Code CCH: Common Channel Handler