NEC Neax 2000 Ivs2 Ccis System Manual

							 NEAX2000 IVS2 CCIS System ManualPage 158  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
SMDR with AP00 Programming (1) 
PROGRAMMING FOR CENTER OFFICE
When sending billing information from local offices to SMDR of Center Office, do the following
programming.
When sending billing information from both Center Office and Local Office to SMDR of Center
Office, do the following programming in addition to the basic programming of SMDR with AP00.
For details of the SMDR with AP00, refer to the Feature Programming Manual.
DESCRIPTION DATA
Assign the system clock data. (1)
(2)0: Calendar Year
0000-9999 (Ex. 1999)
(1)
(2)1: Date
MM DD WW
MM : 01-12 (Month)
DD : 01-31 (Date)
WW: 00 (Sun)
01 (Mon)
02 (Tue)
03 (Wed)
04 (Thu)
05 (Fri)
06 (Sat)
(1)
(2)2: Time
HH MM SS
HH : 00-23 (Hour)
MM : 00-59 (Minute)
SS : 00-59 (Second)START
CM02
A 
						

							CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 159
DESCRIPTION DATA
Do not provide the system with Built-in 
SMDR on MP card.(1)
(2)800
1 : Not provided
(AP00 is effective)
Provide the system with Centralized 
Billing-CCIS for Center Office.(1)
(2)368
0: Provided
Do not provide the system with Centralized 
Billing-CCIS for Local Office.(1)
(2)378
1 : Not provided
Assign the second data to 1 (Distant end is 
a Local Office) to each CCIS channel.
(1)
(2)YY=03
0-7: CCIS channel No.
1: Distant end is Local Office
Invalidate the data for sending of billing 
information on tandem calls through CCIS.(1)
(2)76
1: Sent
Specify the direction for sending of billing 
information from the Local Office.(1)
(2)239
1: SMDR terminal set to “4” by 
CMD001>80/100/120/140
2: SMDR terminal set to “5” by 
CMD001>80/100/120/140
CM08
A
B
CMA7
CMD000
CMD001
INITIAL 
						

							 NEAX2000 IVS2 CCIS System ManualPage 160  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
DESCRIPTION DATA
Assign the attribute data, depending on 
the port (Port 0-3) connected to the SMDR 
terminal. (For the details of commands, 
refer to the Command Manual.)(1)
(2)See the following table.
See the following table.
NOTE:For the Port 1 and Port 3, data speed 9600 bps cannot be set.
Assign the Charging Station Class number 
to each station number.(1)
(2)X-XXXX: Station No.
00-15: Station Class No.
CMD001
B
C
CMD015
AP00 INITIAL
FIRST DATA (1)
MEANINGSECOND
DATA
(2)MEANING
PORT
0PORT
1PORT
2PORT
3
20 24 28 32 Data Speed 2/3/4/5 1200/2400/4800/9600 bps 
NOTE
21 25 29 33 Stop Bit Length 0/1/2 1 bit/1.5 bits/2 bits
22 26 30 34 Data Length 0/1 7 bits/8 bits
23 27 31 35 Parity 0/1/2 None Parity/Even Parity/Odd 
Pa r i ty
80 100 120 140 Equipment Type 4/5 Computer 0/Computer 1
81 101 121 141 Priority for Data Processing 0 1st
82 102 122 142 Message Format 3 NEAX2400 IMS Format
84 104 124 144 Protocol 1 Free Wheel
85 105 125 145 Station Address (SA) 48 0
86 106 126 146 Unit Address (UA) 33 ! 
						

							CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 161
DESCRIPTIONDATA
Invalidate the data setting of Centralized 
Billing used for Local Office.(1)
(2)XX31: Sending of billing information of 
C.O. outgoing calls through 
CCIS
XX : 00-15 (Station Class No. 
assigned by CMD015)
1 : Sent
(1)
(2)XX32: Sending of billing information of 
Tie Line outgoing calls through 
CCIS
XX : 00-15 (Station Class No. 
assigned by CMD015)
1 : Sent
(1)
(2)XX58: Sending of billing information of 
C.O./Tie Line incoming calls 
through CCIS
XX : 00-15 (Station Class No. 
assigned by CMD015)
1 : Sent
END
CMD016
C 
						

							 NEAX2000 IVS2 CCIS System ManualPage 162  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
Built-in SMDR Programming
For Local Office or Tandem Office, in addition to the basic programming of Built-in SMDR, do the
following programming. For details of the Built-in SMDR, refer to Feature Programming Manual.
NOTE 1:When the system provides an AP00 card (CM05 Y=0 second data=04 is assigned), the
Built-in SMDR cannot be provided.
NOTE 2:Outgoing and tandem call records are not available with Built-in SMDR.
DESCRIPTION DATA
Provide the system with Built-in SMDR of 
MP card.
NOTE:Do not assign CM40 YY=00>14 
when using Built-in SMDR in 
Local Office of Centralized 
Billing-CCIS.(1)
(2)800
0: Built-in SMDR of MP card
Not provide the system with Centralized 
Billing-CCIS for Center Office.(1)
(2)368
1 : Provided
Provide the system with Centralized 
Billing-CCIS for Local Office.(1)
(2)378
0: Provided
Specify whether the Office number is sent 
to Center Office for Centralized Billing-
CCIS.
NOTE:When the network adopts Open 
Numbering Plan, set the office 
number by CMA7 YY=06.(1)
(2)801
0 : To send
1 : Not sentSTART
CM08
A
INITIAL 
						

							CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 163
DESCRIPTIONDATA
Assign the data as follows.
1st Data 2nd Data
CCIS channel No.  0
(0-7) for 
Center Office
See Example 3: Data Assignment of 
CMA7 YY=03, 04 on Page 176.
(1)
(2)YY=03
0-7: CCIS channel No.
0 : Distant end is Center Office
1 : Distant end is Local Office
Assign Centralized Billing destination.
See Example 3: Data Assignment of 
CMA7 YY=03, 04 on Page 176.
(1)
(2)YY=04
0-7: CCIS channel No.
00001-16367: Point Code of Center 
Office.
Assign Originating Office number for Open 
Numbering Plan.
See Example 4: Data Assignment of 
CMA7 YY=06 and CMD004>55 on Page 
177.
(1)
(2)YY=06
0-7: CCIS channel No.
0000-9999: Originating Office No.
END
CMA7
A 
						

							 NEAX2000 IVS2 CCIS System ManualPage 164  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
SMDR with AP00 Programming (2)
For Local Office or Tandem Office, in addition to the basic programming of SMDR with AP00, do
the following programming. For details of the SMDR with AP00, refer to Feature Programming
Manual.
DESCRIPTION DATA
Not provide the system with Built-in SMDR 
of MP card.
NOTE:Do not assign CM40 YY=00>14 
when using Built-in SMDR in 
Local Office of Centralized 
Billing-CCIS.(1)
(2)800
1 : Not provided
(AP00 is effective)
Not provide the system with Centralized 
Billing-CCIS for Center Office.(1)
(2)368
1 : Not provided
Provide the system with Centralized 
Billing-CCIS for Local Office.(1)
(2)378
0: Provided
Specify whether the calling party 
information (Trunk Route No./Station No.) 
is sent to SMDR on CCIS tandem calls.
See Example 2: Data Assignment of 
SMDR Call Record on a Tandem Call 
through CCIS on Page 174.(1)
(2)377
0 : Station No. and Office No.
1 : Trunk Route No.START
CM08
A
INITIAL 
						

							CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 165
DESCRIPTIONDATA
Assign the data as follows.
For Local Office:
1st Data 2nd Data
CCIS channel No.  0
(0-7) for 
Center Office
For Tandem Office:
1st Data 2nd Data
CCIS channel No. 0
(0-7) for 
Center Office
CCIS channel No. 1
(0-7) for
Local Office
See Example 3: Data Assignment of 
CMA7 YY=03, 04 on Page 176.
(1)
(2)YY=03
0-7: CCIS channel No.
0 : Distant end is Center Office
1 : Distant end is Local Office
Assign Centralized Billing destination.
(1)
(2)YY=04
0-7: CCIS channel No.
00001-16367: Point Code of Center 
Office.
See Example 3: Data Assignment of 
CMA7 YY=03, 04 on Page 176.
Specify the station number sent to the IMX 
PBX through CCIS for SMDR.
NOTE:If the Center Office is the IMX 
PBX, CM65 YY=26 is required.
(1)
(2)YY=26
Tenant No. of Stations
0 : My Line No.
1 : Sub Line No.
CM65
CMA7
A
B 
						

							 NEAX2000 IVS2 CCIS System ManualPage 166  ND-70918 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
DESCRIPTION DATA
Assign a Station Class number to the 
required station number.(1)
(2)X-XXXX: Station No.
00 -15: Station Class No.
Assign the data for sending the detail call 
information for C.O. outgoing calls through 
CCIS.(1)
(2)XX31
XX: 00-15 (Station Class No. assigned 
by CMD015)
1: To send
Assign the data for sending of detail call 
information for Tie Line outgoing calls 
through CCIS, if required.(1)
(2)XX32
XX: 00-15 (Station Class No. assigned 
by CMD015)
1: To send
Assign the data for sending of detail call 
information for C.O./Tie Line incoming 
calls through CCIS, if required.(1)
(2)XX58
XX: 00-15 (Station Class No. assigned 
by CMD015)
1: To send
Assign the Local Office number for Open 
Numbering Plan.
See Example 4: Data Assignment of 
CMA7 YY=06 and CMD004>55 on Page 
177.(1)
(2)55
X-XXXX: Local Office No. NOTE
Assign the office number to specify the bill-
ing office when originating a call of other 
local office through the own office.
NOTE:If using a leading degit(s) of 0 
and 0 is required to print at the 
SMDR terminal, assign “A” for 
each leading 0 to be printed.
If the leading degit(s) 0 is not 
required to print at the SMDR 
terminal, assign “0”.
See Example 5: Data Assignment of 
CMD004>56 on Page 178.(1)
(2)56
X-XXXX: Billing Office No. NOTE
CMD016
END
CMD015
B
CMD004 
						

							CHAPTER 3 SYSTEM DATA PROGRAMMING
Centralized Billing-CCIS
NEAX2000 IVS2 CCIS System Manual    
ND-70918 (E), Issue 1.0   Page 167
Example 1: Data Assignment of SMDR output for Center Office
In a Centralized Billing Office, the following four patterns of SMDR output can be selected.
(1) To SMDR 0: Sending of billing information from both a Center Office and Local Offices.
(2) To SMDR 1: Sending of billing information from both a Center Office and Local Offices.
(3) To SMDR 0: Sending of billing information from Local Offices.
To SMDR 1: Sending of billing information of a Center Office.
(4) To SMDR 0: Sending of billing information of a Center Office.
To SMDR 1: Sending of billing information from Local Offices.
Data assignment of each pattern for Center Office
PAT T E R N T O F R O MCMD001>
80/100/120/140CMD
001>239CMD016
XX16,
XX21,
XX30XX17,
XX22,
XX55
1 SMDR 0 Center Office C 
and Local Office A/
B4110
2 SMDR 1 Center Office C 
and Local Office A/
B5201
3 SMDR 0 Local Office A/B 4 1
SMDR 1 Center Office C 501
4 SMDR 0 Center Office C 4
10
SMDR 1 Local Office A/B 5 2
Local Office
OFFICE 
ACenter Office
OFFICE 
C
Local Office
OFFICE 
BSMDR 0
SMDR 1