NEC Neax 2000 Ivs2 Ccis System Manual
Have a look at the manual NEC Neax 2000 Ivs2 Ccis System Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
NEAX2000 IVS2 CCIS System ManualPage 128 ND-70918 (E), Issue 1.0 CHAPTER 3 SYSTEM DATA PROGRAMMING Call Forwarding-All Calls-CCIS Operating Procedure Single Line Telephone To set Call Forwarding-All Calls-CCIS from a Single Line Telephone: (1) Lift the handset; receive dial tone. (2) Dial the Call Forwarding-All Calls-CCIS access code; receive feature dial tone. (3) Dial the outgoing trunk access code; receive a single burst of service set tone. (4) Dial the station number to which calls are to be forwarded. (5) Wait approximately 5 seconds; receive service set tone. To cancel Call Forwarding-All Calls-CCIS from a Single Line Telephone: (1) Lift the handset; receive dial tone. (2) Dial Call Forwarding-All Calls-CCIS cancellation code; receive service set tone. Attendant Console To set Call Forwarding-All Calls-CCIS from an Attendant Console: (1) Press an idle LOOP key. (2) Dial Call Forwarding-All Calls-CCIS access code; receive feature dial tone. (3) Dial the origination station number. (4) Dial the outgoing trunk access code; receive a single burst feature dial tone. (5) Dial the station number to which calls are to be forwarded. (6) Press the RELEASE key. To cancel Call Forwarding-All Calls-CCIS from an Attendant Console: (1) Press an idle LOOP key. (2) Dial the Call Forwarding-All Calls-CCIS cancellation code; receive feature dial tone. (3) Dial origination station number; receive service set tone. (4) Press the RELEASE key. NOTE:The Attendant Console can set/cancel Call Forwarding-All Calls for stations within the local system in which the Attendant Console resides.
CHAPTER 3 SYSTEM DATA PROGRAMMING Call Forwarding-All Calls-CCIS NEAX2000 IVS2 CCIS System Manual ND-70918 (E), Issue 1.0 Page 129 Dterm To set Call Forwarding-All Calls-CCIS from a My Line: (1) Lift handset or press SPEAKER key; receive dial tone. (2) Press the Call Forwarding-All Calls-CCIS feature access key; receive feature dial tone. (3) Dial the outgoing trunk access code; receive a single burst of service set tone. (4) Dial the desired station number to which calls are to be forwarded. (5) Wait approximately 5 seconds; receive service set tone. The LED lights and the LCD displays: (6) Replace the handset or press the SPEAKER key. To cancel Call Forwarding-All Calls-CCIS from a D term: (1) Lift handset or press SPEAKER key; receive dial tone. (2) Press the Call Forwarding-All Calls-CCIS feature access key. The LCD displays: (3) Dial “”; receive Service Set Tone. The LED of the associated feature key will go out. The LCD displays: (4) Replace the handset or press the SPEAKER key. SET XXXX (TIME DISPLAY) Forwarding station number D term 65 Series Dterm 75 Series SET XXXX (TIME DISPLAY) FDA YYY (TIME DISPLAY) Dterm 65 Series Dterm 75 Series CF ALL YYY (TIME DISPLAY) CNCL (TIME DISPLAY) Dterm 65 Series Dterm 75 Series CANCEL (TIME DISPLAY)
NEAX2000 IVS2 CCIS System ManualPage 130 ND-70918 (E), Issue 1.0 CHAPTER 3 SYSTEM DATA PROGRAMMING Call Forwarding-Busy Line-CCIS CALL FORWARDING-BUSY LINE-CCIS General Description This service feature provides inter-office Call Forwarding-Busy Line-CCIS, which permits a call to a busy station to be immediately forwarded to a predesignated station or to an Attendant Console in another office in the CCIS network. Programming DESCRIPTION DATA Assign Service Restriction Class A to the required stations. (1) (2)YY=02 X-XXXXXXXX: Station No. XX ZZ XX: 00-15 : Service Restriction Class A Allow Call Forwarding-Busy Line and Call Forwarding-Busy Line-Outside in the Service Restriction Class A assigned by CM12 YY=02. NOTE:When providing Call Forwarding- Busy Line-Outside, set “1” (Al- low) for YY=11, YY=28, YY=12, YY=29 of CM15. (1) (2)YY=11 Call Forwarding-Busy Line YY=28 Call Forwarding-Busy Line-Outside YY=12 Call Forwarding-Busy Line-Outside YY=29 Call Forwarding-Busy Line-Outside/ Don’t Answer-Outside 00-15: Service Restriction Class A assigned by CM12 YY=02 1 : Allow Assign an access code for Call Forward- ing-Busy Line. (1) (2)Y=0-3 Numbering Plan Group 0-3 X-XXXX: Access Code A014: Call Forwarding-Busy Line Entry A015: Call Forwarding-Busy Line Cancel To apply this feature to incoming calls, as- sign trunk route combinations for Tandem connection. (1) (2)YY=05 00-63: Trunk Route No. 1 : Release Signal arrive (1) (2)Y=0 Incoming Trunk Route No. + Outgoing Trunk Route No. for CCIS (Assigned by CM35 YY=05) 0: Allow CM15 CM20 START CM12 CM35 CM36 A
CHAPTER 3 SYSTEM DATA PROGRAMMING Call Forwarding-Busy Line-CCIS NEAX2000 IVS2 CCIS System Manual ND-70918 (E), Issue 1.0 Page 131 DESCRIPTION DATA Specify the Call Forwarding-Busy Line- Outside setting operation.(1) (2)222 0 : The feature is set when the station goes on hook/when receiving Ser- vice Set Tone (ORT time out) 1 : The feature is set when receiving Service Set Tone (ORT time out) Allow or restrict the ability to set Call For- warding-Busy Line for a station with Do Not Disturb set.(1) (2)240 0 : Allow 1: Restrict Assign whether or not an extension can set Call Forwarding-Busy Line-Outside by entering only a trunk access code.(1) (2)386 0: Restrict 1 : Allow Assign whether or not the system should check the trunk restriction class of the forwarded station during a Call Forwarding-Busy Line-Outside.(1) (2)387 0 : Follow trunk restriction 1 : No check Provide Call Forwarding feature with each tenant as per incoming call type. (1) (2)YY=23 Internal Call or ATT assisted call YY=24 C.O. Incoming Call YY=25 Tie Line Incoming Call 00-63: Tenant No. 1 : Call Forwarding Assign a Call Forwarding-Busy Line key to the D term, if desired. (1) (2)YY=00 My Line No. + + Key No. F0014: Call Forwarding-Busy Line Set/ Cancel END CM08 A CM90 CM65 ,
NEAX2000 IVS2 CCIS System ManualPage 132 ND-70918 (E), Issue 1.0 CHAPTER 3 SYSTEM DATA PROGRAMMING Call Forwarding-Busy Line-CCIS When a call is forwarded through CCIS by Call Forwarding-All Calls/-Busy Line/-Don’t Answer, the kind of Call Forwarding and the station number which is setting the service can be indicated on the LCD of the forwarding destination D term. To provide this feature, perform the following programming. On the Forwarding side PBX (PBX-A) On the Forwarded destination side PBX (PBX-B) DESCRIPTION DATA Provide the system with sending of Call Forwarding station information through CCIS.(1) (2)373 0: To provide DESCRIPTION DATA Assign Service Restriction Class A to the required stations. (1) (2)YY=02 X-XXXXXXXX: Station No. XX ZZ XX: 00-15 : Service Restriction Class A Specify the LCD digits number of the D term as 24 digits. (1) (2)YY=95 00-15: Service Restriction Class A assigned by CM12 YY=02 0: 24 digits PBX-APBX-B STATION /TRUNKCCIS STATION 2000Kind of Call Forwarding Call Forwarding-All Calls/ Busy Line/Don’t Answer. Call is forwarded from Station 2000 byand station number “2000” are indicated on LCD. START END CM08 START END CM12 CM15
CHAPTER 3 SYSTEM DATA PROGRAMMING Call Forwarding-Busy Line-CCIS NEAX2000 IVS2 CCIS System Manual ND-70918 (E), Issue 1.0 Page 133 Operating Procedure Single Line Telephone To set Call Forwarding-Busy Line-CCIS from a Single Line Telephone: (1) Lift the handset; receive dial tone. (2) Dial the specific Call Forwarding-Busy Line-CCIS access code; receive feature dial tone. (3) Dial the outgoing trunk access code; receive a single burst of service set tone. (4) Dial the station number to which calls are to be forwarded. (5) Wait approximately 5 seconds; receive service set tone. To cancel Call Forwarding-Busy Line-CCIS from a Single Line Telephone: (1) Lift the handset; receive dial tone. (2) Dial the specific Call Forwarding-Busy Line-CCIS cancellation code; receive service set tone. Attendant Console To set Call Forwarding-Busy Line-CCIS from the Attendant Console: (1) Press an idle LOOP key. (2) Dial the specific Call Forwarding-Busy Line-CCIS access code; receive dial tone. (3) Dial the origination station number. (4) Dial the outgoing trunk access code; receive a single burst service set tone. (5) Dial the station number to which calls are to be forwarded. (6) Press the RELEASE key. To cancel Call Forwarding-Busy Line-CCIS from the Attendant Console: (1) Press an idle LOOP key. (2) Dial the specific Call Forwarding-Busy Line-CCIS cancellation code; receive feature dial tone. (3) Dial the origination station number; receive service set tone. NOTE:The Attendant Console can only set/cancel Call Forwarding-Busy Line for stations within the local system in which the Attendant Console resides.
NEAX2000 IVS2 CCIS System ManualPage 134 ND-70918 (E), Issue 1.0 CHAPTER 3 SYSTEM DATA PROGRAMMING Call Forwarding-Busy Line-CCIS Dterm To set Call Forwarding-Busy Line-CCIS from a Dterm: (1) Lift handset or press SPEAKER key; receive dial tone. (2) Press the Call Forwarding-Busy Line-CCIS feature access key; receive feature dial tone. (3) Dial the outgoing trunk access code; receive a single burst service set tone. (4) Dial the station number to which calls are to be forwarded. (5) Wait approximately 5 seconds; receive service set tone. The LED lights and the LCD displays: (6) Replace the handset or press the SPEAKER key. To cancel Call Forwarding-Busy Line-CCIS from a D term: (1) Lift handset or press SPEAKER key; receive dial tone. (2) Press the Call Forwarding-Busy Line key. The LCD displays: (3) Dial “”; receive service set tone. The LED of the associated feature key will go out. The LCD displays: (4) Replace the handset or press the SPEAKER key. SET XXXX (TIME DISPLAY) Forwarding station number D term 65 Series Dterm 75 Series SET XXXX (TIME DISPLAY) FDB YYY (TIME DISPLAY) Dterm 65 Series Dterm 75 Series CF BUSY YYY (TIME DISPLAY) CNCL (TIME DISPLAY) Dterm 65 Series Dterm 75 Series CANCEL (TIME DISPLAY)
CHAPTER 3 SYSTEM DATA PROGRAMMING Call Forwarding-Don’t Answer-CCIS NEAX2000 IVS2 CCIS System Manual ND-70918 (E), Issue 1.0 Page 135 CALL FORWARDING-DON’T ANSWER-CCIS General Description This service feature provides interoffice Call Forwarding-Don’t Answer-CCIS, which permits a call to an unanswered station to be forwarded to a pre-designated station or to an Attendant Console in another office, when the called station does not answer after a predetermined time interval. Programming DESCRIPTION DATA Assign Service Restriction Class A to the required stations. (1) (2)YY=02 X-XXXXXXXX: Station No. XX ZZ XX: 00-15 : Service Restriction Class A Allow Call Forwarding-Don’t Answer and Call Forwarding-Don’t Answer-Outside in the Service Restriction Class A assigned by CM12 YY=02. NOTE:When providing Call Forwarding- Don’t Answer-Outside, set “1” (Allow) for YY=10, YY=27 of CM15. (1) (2)YY=10 Call Forwarding-Don’t Answer YY=27 Call Forwarding-Don’t Answer-Outside YY=12 Call Forwarding-Busy Line-Outside YY=29 Call Forwarding-Busy Line-Outside/ Don’t Answer-Outside 00-15: Service Restriction Class A assigned by CM12 YY=02 1 : Allow Assign an access code for Call Forward- ing-All Calls Entry and Cancellation re- spectively. (1) (2) (2)Y=0-3 Numbering Plan Group 0-3 X-XXXX: Access Code A016 : Call Forwarding-Don’t Answer Entry A017 : Call Forwarding-Don’t Answer Cancel For setting the same access code as Call Forwarding-Busy Line: A012: Entry A013: Cancel CM15 CM20 START CM12 A
NEAX2000 IVS2 CCIS System ManualPage 136 ND-70918 (E), Issue 1.0 CHAPTER 3 SYSTEM DATA PROGRAMMING Call Forwarding-Don’t Answer-CCIS DESCRIPTION DATA To apply this feature to incoming calls, set the trunk route combinations for Tandem connection. (1) (2)YY=05 00-63: Trunk Route No. 1 : Release Signal arrive Specify the combination of Trunk Routes allowing a Trunk to Trunk (CCIS) Connection. (1) (2)Y=0 XX ZZ XX: 00-63 (Incoming Trunk Route) ZZ: 00-63 (Outgoing Trunk Route) 0: Allow Specify the Call Forwarding-Don’t Answer- Outside setting operation.(1) (2)222 0 : The feature is set when the station goes on hook/when receiving Ser- vice Set Tone (ORT time out) 1 : The feature is set when receiving Service Set Tone (ORT time out) DID call to station with Call Forwarding- Don’t Answer set over CCIS to a busy destination station. (Destination station has no call forwarding set.)(1) (2)449 0 : Ring continuously at forwarded DID station 1 : Drop to busy signal after timer set by CM41 Y=0>01 Assign whether or not an extension can set Call Forwarding-Don’t Answer-Outside by entering only a trunk access code.(1) (2)386 0: Restrict 1 : Allow Assign whether or not the system should check the trunk restriction class of the forwarded station during a Call Forwarding-Don’t Answer-Outside.(1) (2)387 0 : Follow trunk restriction 1 : No check Provide Call Forwarding feature with each tenant as per incoming call type. (1) (2)YY=23 Inter Call or ATT assisted call YY=24 C.O. Incoming Call YY=25 Tie Line Incoming Call 00-63: Tenant No. 1 : Call Forwarding CM35 A CM36 B CM08 CM65
CHAPTER 3 SYSTEM DATA PROGRAMMING Call Forwarding-Don’t Answer-CCIS NEAX2000 IVS2 CCIS System Manual ND-70918 (E), Issue 1.0 Page 137 DESCRIPTION DATA Specify the timing for Call Forwarding- Don’t Answer for a trunk incoming call. (1) (2)Y=0 01 01-30: 0-120 sec. (4 sec. increments) If no data is set, the default setting is 32-36 seconds. Specify the timing for Call Forwarding- Don’t Answer for an internal call or an assigned call. (1) (2)Y=0 15 01-30: 4-120 sec. (4 sec. increments) If no data is set, the default setting is 32-36 seconds. Assign Call Forwarding-Don’t Answer Key to the D term, if desired. (1) (2)YY=00 My Line No. + + Key No. F0016: Call Forwarding-Don’t Answer Set/Cancel For setting the same key as Call Forwarding-Busy Line (2) F10012: Set/Cancel CM41 B END CM90 ,