Mitel Sx 200 Ml Pabx Lightware 16 Instructions Guide
Have a look at the manual Mitel Sx 200 Ml Pabx Lightware 16 Instructions Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 55 Mitel manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Appendix A - Programming Error Messages Table A-l Programming Error Messages (continued) Error Message Unprogram all non-T1 ISDN Cards from bay X before adding 2nd Tl ISDN Card Meaning This message appears if you try to program a second Tl Card while any card, other than a Tl Trunk Card, is programmed in a 96-port bay. User currently programming feature keys Cannot EXPAND SET while set user is accessing Try again later Program Feature Key feature. Valid COS range must be entered before Before a print operation can occur, a valid COS range COS print is initiated must be entered (1 to 50). Refer to Form 03, COS Define. Valid TRK CCT DESC range must be This error occurs in Form 32, Customer Data Print. The entered before print is initiated valid trunk circuit descriptor range is 1 to 25. Value XX is outside valid range for ACD The ACD group number entered is out of range. Agent Group (I-50) Value X is outside valid range for BAY (1 - 5) The selected bay number is invalid. The range is 1 to 5. Value XX is outside valid range for The selected circuit number is invalid. CIRCUIT (1 - XX) Value XX is outside valid range for There are a maximum of 25 trunk circuit descriptors. CIRCUIT DESCRIPTORS (1 - 25) Value XX is outside valid range for COR (1 The selected COR group number is out of range. The - 25) range is 1 to 25. Value XX is outside valid range for COS (1 The selected COS number is out of range; the range is - 50) 1 to 50. Value XX is outside valid range for ENTRY In Form 18, Miscellaneous System Ports, there are only NUMBER (1 -XX) 38 entry numbers. Value X is outside valid range for HUNT The selected hunt group number is invalid. The range GROUP (1 - 50) is 1 to 50. Value XX is outside valid range for In Form 30, Device Interconnection Table, there are only INTERCONNECT NUMBER (1 -XX) 25 Interconnect Numbers. Value XX is outside the valid range for KEY The selected SUPERSET key number is invalid. Key NUMBERS numbers range from 2 to 15 for SUPE/?SETtelephones, and 1 to 32 for SUPERSET DSS Modules. Value XX is outside the valid range for The pager number specified is invalid. The range is 1 to PAGER (l-9) 9. Value XX is outside the valid range for The selected paging group number is invalid. The range PAGING GROUP (1 - 50) is 1 to 50. Value XX is outside valid range for PICKUP The selected pickup group number is invalid; the range GROUP (1 - 50) is 1 to 50. Value XX is outside the valid range for the Th e selected timer value is invalid. Refer to Table 4-7, selected timer option Trunk Options for a list of valid timer values. Value XX is outside valid range for SLOT The selected slot number is invalid. (1 - XX) Value XX is outside valid range for START In Form 25, ARS: Route Plans, the START HOUR HOUR (0 - 23) specifies the starting time for each time zone. The time is represented by two digits in 24-hour format. Page 15 of 16 March 1997 Issue I Revision 0
Customer Data Entry Table A-1 Programming Error Messages (continued) Error Message Value XX is outside valid range for SUBCIRCUIT (X - X) Meaning Subcircuits 1 to 4 refer to the DTMF Receivers; they cannot be accessed. The only subcircuits that can be accessed are the relays on the Receiver/Relay Module. These are subcircuits 5 and 6. ValueXXisoutsidevalid rangeforTENANT The selected tenant group number is invalid; the range (1 -25) is 1 to 25. Tenant group numbers are used in the following forms: Form 05, Tenant Interconnection Table, Form 06, Tenant Night Switching Control, Form 07, Console Assignments, Form 09, Stations/SU/?ERSE~ Telephones, Form 12, Data Assignment, Form 14, Non-Dial-In Trunks, Form 15, Dial-In Trunks and Form 19, Call Rerouting Table. Value X is outside valid range for TRUNK The selected trunk group number is invalid. The range GROUP (1 - 50) is 1 to 50. Value XXX is outside valid range for Trunk numbers range from 1 to 200. TRUNK NUMBERS (1 - 200) Value 0 is outside valid range (l-99) The selected ACD path or priority is invalid. Verified account codes system option must in Form 33, Account Code Entry, the account code can be enabled first only be modified if System Option 05, Verified Account Codes is enabled. Refer to Form 04, System Options/System -Timers. Voice port of the DNIC console must be The DNIC console must be programmed first in Form programmed first 07 before its data port can be programmed in Form 12. Warning: This path will be deleted unless The user attempted to QUIT this form with “Access Code 1 st two status lines are assigned for This ACD Path” or “Primary ACD Agent Group” field blank. A path is meaningless without these two pieces of information. The user is now provided with two keys: QUIT, which quits the form and deletes this path, and BACK TO FORM (softkey 0), which returns the user to the form. Warning: Reassigning agentfrom group XX The inserted ID is one that is already programmed in CONFIRM or CANCEL group XX. This agent will be reassigned now to the current ACD group. Press either the CONFIRM or CANCEL softkey. Warning: Ret X info will be deleted unless The user attempted to QUIT the form while only one of Start Time 8. Access Code assigned the indicated status fields for Recording X was assigned. Recording info is meaningless without both these pieces of info. The user is provided with two keys now: QUIT, which quits the form and deletes all entered info about Recording X, and BACK TO FORM (softkey 0) which returns the user to the form. Page 16 of 16 A-16 Issue 1 Revision 0 March 1997
Appendix B Blank CDE Forms This appendix contains blank CDE forms that you can use to plan system programming. Forms that cannot be edited are not shown in this appendix. You begin planning the programming by defining the location of all peripheral cards and modules in the system. For information on the actual CDE forms, refer to the main body of this document. Further information on individual features is contained in the FeaW-es DescQMon Practice. March 1997 Issue 1 Revision 0 B-l
Customer Data Entry FORM 01 - SYSTEM CONFIGURATION B-2 6 Issue 1 Revision 0 March 1997
Appendix B - Blank CDE Forms FORM 02 - FEATURE ACCESS CODES Feature Numbers 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Maintenance Functions (Test Line) Direct Inward System Access Callback Busy Call Hold Call Hold Retrieve (Local) Call Hold Retrieve (Remote) Abbreviated Dial Access Clear All Features SUPERSET Telephone Loopback Test Tone Demonstration ADL Call Setup ADL Disconnect Last Number Redial Executive Busy Override Page 1 of 2 March 1997 Issue 1 Revision 0 B-3
Customer Data Entry 40 41 SUPERSETTeL Maid in Room Status Display Send Message 42 Call Message Sender of Oldest Message B-4 Issue 1 Revision 0 March 1997
Appendix B - Blank CDE Forms FORM 03 - CLASS OFSERVICE DEFINE C;;N&n Class Of Service Option Name Enter COS ## (01 to 50) and COS Name 100 I Attendant Bell Off 204 Call Block Applies (Room To Room) Page I of 6 March 1997 Issue 1 Revision 0 B-5
Customer Data Entry B-6 Issue 1 Revision 0 March 1997
Appendix B - Blank CDE Forms COS Option Numbers Class Of Service Option Name Enter COS ## (01 to 50) and COS Name 239 Priority Dial 0 240 Line Privacy 241 Receive Only 242 Repeated Camp-On Beep 243 Non-Busy Extension 244 Room Status Applies 245 Abbreviated Dialing Access 246 SMDR - Extended Record 247 SMDR - Record Meter Pulses I 24% TAFAS Any Access I I I I I I 255 Repeated Camp-On Beeps Timer 5 - 15 Seconds 256 UCD Music On Hold Timer 0 - 50 Minutes 257 Flash Over Trunk 258 Display Prime as Forwarder 259 Message Sending 260 Internal / External Split Call Forwarding I 261 ONS Voice Mail Port I I I I I I 262 Ignore Forward Busy with Free Appearance 263 Delay Ring Timer 2 - 6 Rings 264 Half Fwd NA timer for DID call when VM msg on 265 Voice Mail System Speed Dial index 0 - 25.5 300 Automatic Callback 301 Camp-On 302 Flash-in Conference I I I I I I 1 1 , , , 1 303 Paging Zone I Access I 304 Paging Zone 2 Access I I I I I I 305 306 Paging Zone 3 Access Paging Zone 4 Access Page 3 of 6 March 1997 Issue 1 Revision 0 B-7
Customer Data Entry Class Of Service Option Name Enter COS # (01 to 50) and COS Name 604 PBX SUPERSETTel. - Automatic Outgoing Line 605 SUPERSETTelephone - Message Program 606 SUPERSETTeL - Enhanced Answering Position 607 SUPERSETTelephone - Associated Modem Line Page4of6 1 Issue 1 Revision 0 March 1997