Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation, Upgrades, And Additions For Compact Modular Cabinets Manual

							DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
About This Book 
xxi Standards Compliance 
Standards Compliance
The eq uip ment p resented  in this doc ument c omp lies with the following  stand ard s 
(as ap p rop riate):
nITU-T (Formerly CCITT)
nEC M A
nETSI
nIPNS
nDPNSS
nNational ISDN-1
nNational ISDN-2
nISO-9000
nANSI
nFCC Part 15 and Part 68
nEN55022
nEN50081
nEN50082
nC I SPR2 2
nAustralia AS3548 (AS/NZ3548)
nAustralia AS3260
nIEC 825
nIEC 950
nUL 1459
nUL 1950
nCSA C222 Number 225
nTS0 0 1
Contac t your Luc ent Tec hnolog ies rep resentative for more information. 
						

							DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
About This Book 
xxii Electromagnetic Compatibility Standards 
Electromagnetic Compatibility 
Standards
This p rod uc t c omp lies with and  c onforms to the following  stand ard s (as 
ap p rop riate):
nLimits and  Methods of Measurements of Rad io Interferenc e 
Charac teristic s of Information Tec hnolog y Eq uipment, EN55022 
(CISPR22), 1993
nEN50082-1, Europ ean Generic  Immunity Standard
nFCC Part 15
nAustralia AS3548
NOTE:
The system c onforms to Class A (ind ustrial) eq uip ment. Voic e 
terminals meet Class B requirements.
nElec trostatic  Disc harg e (ESD) IEC 1000-4-2
nRad iated  rad io freq uenc y field  IEC 1000-4-3
nElec tric al Fast Transient IEC 1000-4-4
nLightning  effec ts IEC 1000-4-5
nConduc ted radio freq uenc y IEC 1000-4-6
nMains freq uenc y mag netic  field  IEC 1000-4-8
nLow freq uenc y mains d isturb anc e IEC 1000-4-11 
						

							DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
About This Book 
xxiii Antistatic Protection 
European Union Standards
Luc ent Tec hnolog ies Business Communic ations Systems (BCS) d ec lares that the 
DEFINITY eq uip ment sp ec ified  in this d oc ument b earing  the “ CE”  mark c onforms 
to the Europ ean Union Elec tromag netic  Compatib ility Direc tives. 
The “ CE”  (Conformité Europ eénne) mark ind ic ates c onformanc e to the Europ ean 
Union Elec tromag netic  Comp atib ility Direc tive (89/336/EEC), Low Voltag e 
Direc tive (73/23/EEC), Telec ommunic ation Terminal Equip ment (TTE) Direc tive 
(91/263/EEC), i-CTR3 Basic  Rate Interfac e (BRI), and  i-CTR4 Primary Rate 
Interfac e (PRI) as ap p lic ab le.
The “ CE”  mark is ap plied  to the following  Release 8 p rod uc ts:
nGlob al AC-p owered  Multi-Carrier Cabinet (MCC) 
nDC-p owered  Multi-Carrier Cab inet (MCC) with 25 Hz ring  g enerator
nAC-p owered  Enhanc ed  Sing le-Carrier Cab inet (ESCC) with 25 Hz ring  
g enerator
nAC-p owered  Comp ac t Sing le-Carrier Cab inet (CSCC) with 25 Hz ring  
g enerator
nEnhanc ed DC p ower system 
nAC-p owered  Comp ac t Mod ular Cab inet (CMC) with 25 Hz ring  g enerator
nAC-p owered  Comp ac t Mod ular Cab inet (CMC) with 50 Hz ring  g enerator 
for Franc e
Antistatic Protection
!CAUTION:
When hand ling  c irc uit pac ks or any c omp onents of a DEFINITY System, 
always wear an antistatic  wrist g round  strap . Connec t the strap  to an 
ap p roved  g round  suc h as an unp ainted  metal surfac e on the DEFINITY 
Sys t e m .
Remove/Install Circuit Packs
!CAUTION:
The c ontrol c irc uit p ac ks with white lab els c annot b e removed  or installed  
when the power is on. The port circuit packs with gray labels (older version 
circuit packs had purple labels) can be removed or installed when the 
p ower is on. 
						

							DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
About This Book 
xxiv Federal Communications Commission Statement 
Federal Communications Commission 
Statement
Part 68: Statement
Part 68: Answer-Sup ervision Sig naling . Allowing  this eq uip ment to b e op erated in 
a manner that d oes not p rovid e p rop er answer-sup ervision sig naling is in 
violation of Part 68 rules. This equip ment returns answer-sup ervision sig nals to 
the p ub lic  switc hed network when:
nAnswered  b y the c alled  station
nAnswered  b y the attend ant
nRouted  to a rec ord ed  announc ement that c an b e ad ministered  b y the CPE 
user
This eq uip ment returns answer-sup ervision sig nals on all DID c alls forward ed 
b ac k to the p ub lic  switc hed telep hone network. Permissib le exc eptions are: 
nA c all is unanswered
nA b usy tone is rec eived
nA reorder tone is rec eived
Luc ent Tec hnolog ies attests that this reg istered  eq uipment is c ap ab le of 
p rovid ing  users ac c ess to interstate p rovid ers of op erator servic es throug h the 
use of ac c ess c od es. Modific ation of this eq uip ment b y c all ag g reg ators to b loc k 
ac c ess d ialing  c od es is a violation of the Telep hone Op erator Consumers Ac t of 
1990.
This eq uip ment c omp lies with Part 68 of the FCC Rules. A lab el is p rovid ed  on 
this eq uipment that c ontains, among  other information, the FCC reg istration 
numb er and  ring er eq uivalenc e numb er (REN) for this eq uip ment. If req uested , 
this information must b e p rovid ed  to the telep hone c omp any. 
The REN is used  to d etermine the q uantity of d evic es whic h may b e c onnec ted  
to the telep hone line. Exc essive RENs on the telep hone line may result in d evic es 
not ring ing  in resp onse to an inc oming  c all. In most, b ut not all areas, the sum of 
RENs should  not exc eed  5.0. To be c ertain of the numb er of d evic es that may b e 
c onnec ted  to a line, as d etermined  b y the total RENs, c ontac t the loc al telep hone 
c omp any.
NOTE:
REN is not req uired  for some typ es of analog  or d ig ital fac ilities. 
						

							DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
About This Book 
xxv Federal Communications Commission Statement 
Means of Connection
Connec tion of this equip ment to the telep hone network is shown in the following  
tab le.
If the terminal eq uip ment (DEFINITY
® System) c auses harm to the telep hone 
network, the telep hone c omp any will notify you in ad vanc e that temp orary 
d isc ontinuanc e of servic e may b e req uired . But if ad vanc e notic e is not prac tic al, 
the telep hone c omp any will notify the c ustomer as soon as p ossib le. Also, you 
will be ad vised  of your rig ht to file a c omp laint with the FCC if you b elieve it is 
nec essary.
The telep hone c omp any may make c hang es in its fac ilities, eq uip ment, 
op erations or proc ed ures that c ould  affec t the op eration of the equip ment. If this 
happens, the telephone c ompany will provide advance notice in order for you to 
make nec essary mod ific ations to maintain uninterrup ted  servic e.
If troub le is exp erienc ed  with this eq uip ment, for rep air or warranty information, 
p lease c ontac t the Tec hnic al Servic e Center at 1-800-242-2121. For assistanc e 
outsid e of the United  States, refer to ‘‘Where to Call for Tec hnic al Sup p ort’’
. If the 
eq uip ment is c ausing  harm to the telep hone network, the telep hone c ompany 
may req uest that you d isc onnec t the eq uip ment until the p rob lem is resolved .
It is rec ommend ed  that rep airs b e performed  b y Luc ent Tec hnolog ies c ertified  
tec hnic ians.
The eq uip ment c annot b e used on p ublic  c oin p hone servic e p rovid ed  b y the 
telep hone c omp any. Connec tion to p arty line servic e is sub jec t to state tariffs. 
Contac t the state p ub lic  utility c ommission, p ub lic  servic e c ommission or 
corporation commission for information.
This eq uip ment, if it uses a telep hone rec eiver, is hearing  aid  c omp atib le.
Manufacturer ’s Port Identifier FIC CodeSOC/REN/
A.S. Code Network Jacks
Off/On Premises Station OL13C 9.0F RJ2GX, RJ21X, 
RJ11C
DID Trunk 02RV2-T 0.0B RJ2GX, RJ21X
CO Trunk 02GS2 0.3A RJ21X
CO Trunk 02LS2 0.3A RJ21X
Tie Trunk TL31M 9.0F RJ2GX
1.544 Dig ital Interfac e 04DU9-B,C 6.0P RJ48C, RJ48M
1.544 Dig ital Interfac e 04DU9-BN,KN 6.0P RJ48C, RJ48M
120A2 Channel Servic e Unit 04DU9-DN 6.0P RJ48C 
						

							DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
About This Book 
xxvi Federal Communications Commission Statement  
						

							Installing and Cabling the Cabinets 
1-1 Check Customer’s Order 
1
DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
1
Installing and Cabling the Cabinets
Check Customer’s Order
Chec k the c ustomer’s order and  the ship ping  p ac king  lists to c onfirm that all 
eq uip ment is p resent. If any eq uip ment is missing , report this to your Luc ent 
Tec hnolog ies rep resentative. Chec k the system ad junc ts for d amag e and  rep ort 
all damage according to local shipping instructions. 
Correcting Shipping Errors
1. Red-tag all defective equipment and over-shipped equipment and return 
ac c ord ing  to the nearest Material Stoc king  Loc ation (MSL) instruc tions. 
For international c ustomers, c ontac t your ord er servic e ag ent.
2. Direc t all short-ship p ed  reports to the nearest MSL. Contac t the 
ap p rop riate loc ation for sp ec ific  instruc tions. For Streamlined  
Imp lementation in the United  States, c all 1-800-772-5409.
Unpack and Inspect
READ THIS FIRST !
!CAUTION:
A fully load ed  system weig hs 58 lb s (26.3 kg ). Use lifting  p rec autions. If the 
d oors, p ower unit, and  c irc uit p ac ks are removed , the unit weig hs only 29 
lb s (13.1 kg). 
1. Verify the equipment received. See Figure 1-1
. Ac tual eq uip ment may vary 
in ap p earanc e and  may ship  in sep arate p ac kag es.  
						

							DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-2 Unpack and Inspect 
1
2. Eq uip ment c omc od es are listed  in Table 1-1.
3. Before mounting  the c ab inets, remove the c ab inet d oors b y op ening  them 
and  lifting them straig ht up  and  off of the hing e p ins. 
Figure 1-1. Equipment Packed with the Compact Modular Cabinet Figure Notes
1. Left p anel (also ac ts as a wall-mount template 
and  as a floor mount p ed estal)
2. Comp act mod ular c abinet
3. Right p anel
4. U.S. Robotics external modem (not shipped 
with all systems)
5. #12 x 1-inc h should er screws
6. Proc essor interfac e cab le (not shipp ed  with all 
cabinets)7. AC p ower c ord  (NEMA 5-15P or 
IEC 320)
8. Vertic al TDM/LAN b us c ab le (not 
ship ped  with all systems)
9. Horizontal TDM/LAN bus c able 
(not ship ped  with all systems)
10. 14-in. (35.5 cm) 6 AWG (#40) 
(16 mm
2) ground wire
11. Sing le-p oint ground  b loc k
qrdmpart KLC 011598
6
7
4
8
9
1011
5
3
2
1 
						

							DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-3 Comcodes for CMC 
1
Comcodes for CMC
Table 1-1 lists the c omc od es for equip ment used  with the CMC.
Table 1-1. Comcodes for Release 7.1 and Later
Comcode Description
847951662 Left Panel
847951670 Rig ht Panel 
847915238 Rig ht Door
847915246 Left Door
847960002 Proc essor Interfac e Cab le
108186255 TN798B Proc essor Circ uit Pac k
107784019 TN2182B Tone-Cloc k — 
Tone Detector and Call Classifier Circuit Pac k
407633999 U.S. Rob otic s Sp ortster Mod el USR 33.6 EXT External Mod em
105631527 TDM/LAN Bus Terminator (AHF110)
407772870 Vertic al TDM/LAN Bus Cable (WP-91716 List 8)
407772888 Horizontal TDM/LAN Bus Cab le (WP-91716 List 9)
706827717 Sing le-Point Ground  Bloc k
H600-487 14-inc h (35.5 c m) 6 AWG (#40) (16 mm
2) Green Ground  Wire
847987187 CMC 110 Cross-Connec t Assemb ly (Main Distrib ution Frame)
407676691 120 VAC Power Distrib ution Unit (145D 6-AC)
107949364 650A Power Sup p ly
848082715 Fan Assemb ly
407745009 Fan Air Filter
405362641 120 VAC Power Cord  (U.S.)
407786623 120 VAC Power Cord  (Europ e)
407786599 120 VAC Power Cord  (United  Kingd om)
407786631 120 VAC Power Cord  (Australia)
407790591 120 VAC Power Cord  (Ind ia)
106278062 Ap p aratus Blank (Circ uit Pac k Blank) (158P)
601817448 2-Mb yte Mass-Storag e Translation Card  (White Card )
Continued on next page 
						

							DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-4 Comcodes for CMC 
1
601817422 4-Mb yte Mass-Storag e Translation Card  (White Card )
601817430 10-Mb yte Mass-Storag e Translation Card (White Card )
106606536 Integ rated  Channel Servic e Unit (ICSU) (120A2)
107988867 DS1 Loop b ac k Jac k (T1 Only) (700A)
107152969  75 Ohm DS1 Coaxial Ad ap ter (888B)
403613003  157B Connec ting  Bloc k
406948976 6SCP-110 Protec tor
107435091  507B Sneak Current Fuse Panel
407216316  220029 Sneak Current Fuse
403613003  157B Connec ting  Bloc k
103970000 Main Distrib ution Frame Lab el (Cod e 220A)
104307327 C6C c ab le — 50-ft (15.2 m) shield ed DS1 c ab le with 50-p in male to 
15-pin male
104307376 C6D c ab le — 50-ft (15.2 m) shield ed DS1 c ab le with 50-p in male on 
eac h end
104307434 C6E c able — 100-ft (30.5 m) shield ed  DS1 c ab le with 50-p in male to 
50-p in female
104307475 C6F c ab le — 50-ft (15.2 m) shield ed DS1 c ab le with 50-p in male to 3 in. 
(7.6 cm) stub
102381779  3B1A Carbon Bloc k
104410147  3B1E-W Wid e Gap  Gas Tub e
105514756  3C1S Solid State
102904893  4B1C Carb on Bloc k with Heat Coil
104401856  4B1E-W Wid e Gap  Gas Tub e with Heat Coil
104386545  4C1S Solid  State with Heat Coil
406948976  SCP-110 Sneak Current Protec tor
407216316  220029 Fuse Sneak Current Protec tor
105581086  4C3S-75 Solid  State with Heat Coil
406144907 ITW LINX Gas Tub e, Avalanc he Sup press
901007120 ITW Linx Ground  Bar (used  with ab ove)
Table 1-1. Comcodes for Release 7.1 and Later — Continued
Comcode Description
Continued on next page