Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation, Upgrades, And Additions For Compact Modular Cabinets Manual

							DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-75 Install and Wire Telephones and Other Equipment 
1
Install Attendant Console — Optional
1. Position the attend ant c onsole in the d esired  loc ation and  c onnec t the 
mod ular c ord  to the information outlet.
2. Install lab els p er the Attend ant Console form and  Disp lay Mod ule form 
assig nments.
3. Install a Digital Line c irc uit p ac k in the assig ned  c arrier slot (if required ).
4. Ad minister the Attend ant Console forms in DEFINITY Enterp rise 
Communic ations Server Release 8 Ad ministrator’s Guid e.
Hard-Wire Bridging
!CAUTION:
Bridg ing  or p aralleling  these end p oints c an c ause elec tric al d amag e to the 
c onsoles or c ause the c irc uit p ac k to remove p ower from the c onsoles.
Analog  type hard -wire b rid g ing  is not allowed  for 4-wire (only) DCP end p oints. 
This is because hard-wire bridging provides no way of combining the digital 
output of 2 bridged DCP sets. Also, a bridged endpoint causes the added load 
to degrade the DCP signal. 
Dual Wiring of 2-Wire and 4-Wire Endpoints
Do not simultaneously wire a 2-wire and  4-wire end p oint to the same eq uip ment 
loc ation in an MDF, even though they c onnec t to d ifferent c olored  wire pairs. The 
system uses sep arate c irc uit p ac ks to interfac e 2- and  4-wire end p oints, and  
none are c ap ab le of interfac ing both.
Install 26B1 Selector Console — Optional
1. Connec t the sup plied  3-foot (0.9 m) D8AC c ab le to the mod ular jac k on 
the b ottom of the 26B1 Selec tor Console. 
2. Route the c ab le to the attend ant c onsole and  c onnec t to the DXS/BLF 
jac k.
3. Attac h labels ac c ord ing  to the Attend ant Console form.
4. Ad minister the c onsole using  DEFINITY Enterp rise Communic ations 
Server Release 8 Administrator’s Guide. 
						

							DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-76 Connect External Alarms and Auxiliary Connections 
1
Connect External Alarms and 
Auxiliary Connections
NOTE:
The AUX c onnec tor is p art of the Proc essor Interfac e c ab le assemb ly (J1).
Alarm Input
Alarms c an b e g enerated  on ad junc t eq uip ment, sent to the DEFINITY System, 
and  rec ord ed  and  rep orted  as “ external alarms.”  A typ ic al major alarm inp ut is 
from a UPS.
1. Connec t 1 major alarm inp ut wire p air and  1 minor alarm inp ut wire p air to 
the auxiliary field  from the AUX c onnec tor (J1 on Proc essor Interfac e 
Cab le). See Table 1-14
.
Alarm Output
The system provides a relay contac t that can operate a customer-provided 
alarm, suc h as a lig ht or b ell. The c irc uitry and  p ower sourc e are c ustomer- 
provided. The alarm device must not exc eed a rating of more than 30 VAC RMS 
or 60 VDC at 0.75 Amp s. 
1. Connec t the external alarm outp ut. See Table 1-15
.
2. Give this information to your Luc ent Tec hnologies rep resentative for 
troub leshooting  p urp oses.
Table 1-14. Alarm Inputs at AUX Connector
Alarm Input Type Color AUX Connector
Major White-Blue AP1 (Pin 26) 
Blue-White Ground  (Pin 1)
Minor White-Orang e AP2 (Pin 27) 
Orang e-White Ground  (Pin 2)
Table 1-15. Alarm Output at AUX Connector
Alarm Output Type Color AUX Connector
EXTALMA Violet-Green (Pin 48)
EXTALMB Green-Violet Ground  (Pin 23) 
						

							DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-77 Telephone Pin Designations 
1
Emergency Transfer and Auxiliary Power
NOTE:
Only 1 emerg enc y transfer p ower p anel and  1 auxiliary power c onnec tion is 
provided per system.
Connec t emerg enc y transfer p ower and  auxiliary p ower as shown in Table 1-16
. 
Auxiliary p ower inc ludes power to an attend ant c onsole or ad junc t devic e.  
Telephone Pin Designations
Table 1-17 p rovid es p ort c irc uit p ac k and  telep hone p in d esignations.
Table 1-16. Emergency Transfer and Auxiliary Power
Power Type Color AUX Connector
Emerg enc y Transfer Blac k-Blue  XFER48 (Pin 36)
Blue-Blac k Ground  (Pin 11)
 Auxiliary (Ad junc t) 
-48 VDCBrown-Yellow ACC48A (Pin 19)
Yellow-Brown Ground  (Pin 44)
Table 1-17. Port Circuit Pack and Telephone Pin Designations
Pin on 
Modular 
Plug4-wire; 302C1, 
8400-Series, 
603E, 9403, 
94342-wire; 302C1, 
8400-Series, 603E, 
9403, 9410, 94348510T BRI 
(with adjunct 
speaker 
phone)Analog Station, 
ModemZ3A1 & Z3A2 
ADU, Data 
Module 
1TXT TXT
2TXR T TXR
3 PXT TXT R PXT
4 T PXR
5 R PXT
6 PXR TXR PXR
7 -48VDC (-48VDC) (-48VDC)
8GRD GRD GRD
circuit 
pack4-wire d ig ital 
(8 port)2-wire d igital (16 or 24 
port)4-wire BRI 
Trunk Sid eAnalog  line (16 
or 24 p ort)Data Line
PX PBX transmit T Tip (A)
TX Terminal transmit R Ring(B) 
						

							DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-78 CAMA/E911 Installation 
1
CAMA/E911 Installation
Configuration
The CAMA/E911 feature will only work on R8 CMC if TN429C CO trunk c irc uit 
p ac ks (or later suffix) are used .
Port Networks (PNs) that inc lud e TN429C c irc uit pac ks used  to interfac e to 
CAMA trunks may require some CPTR resourc es to b e either TN744D V2 or 
TN2182B c irc uit p ac ks, sinc e TTR/CPTR or General Purp ose Tone Rec eiver 
(GPTR) resourc es are selec ted  from the p ool availab le in the PN when need ed .
Hardware Setup
1. Insert the TN429C or later CO trunk c irc uit pac k in any availab le p ort slot.
2. Be sure the TN744D Call Classifier - Detec tor c irc uit p ac k is Vintag e 2 or 
later.
3. Wire the CAMA trunk to the MDF (the trunk from the CO). Refer to the 
p inouts in Table 2-13
.
Administration Setup
1. At the promp t, type add trunk next
 and press En t e r.
Screen 1-3. CAMA Trunk Group form (page 1)
2. On the Trunk Group  sc reen (p ag e 1), in the Group Type:
 field, enter 
cama
.
3. In the Group Name:
 field , enter the d esired  name. 
4. In the TAC:
 field , enter the d esired  trunk ac c ess c od e. 
  
                                                                     Page 1 of 11
                               TRUNK GROUP
Group Number: 1                  Group Type: cama      CDR Reports: y
  Group Name:  cama Trunk Group - E911  COR: 1     TN: 1       TAC: 701
   Direction: outgoing     Outgoing Display? y CESID I Digits Sent: 0
                             Busy Threshold: 99
TRUNK PARAMETERS
         Trunk Type: wink-start
 Outgoing Dial Type: r1mf
  Trunk Termination: rc
                             
						

							DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-79 CAMA/E911 Installation 
1
5. In the Outgoing Display:
 field , enter y
.
6. In the CESID I Digits Sent:
 field , enter the number d irec ted  b y the 
Central Offic e (CO) or the Pub lic  Safety Answering Point (PSAP).
7. Sc roll to p ag e 3 of the form.
Screen 1-4. Administrable Timers form (page 3)
8. On the Administrable Timers sc reen (page 3), you may need to adjust 
these field s ac c ord ing  to your CO. Sc roll to pag e 5.
 
Screen 1-5. Group Member Assignments form (page 5)
9. On the Group  Memb er Assig nments sc reen, in the Port
 field , ad d the 
trunk memb ers and press 
En t e r when finished .
  
                                                                     Page 3 of 11
                              TRUNK GROUP
ADMINISTRABLE TIMERS
                                       Outgoing Disconnect (msec): 400
                                  Cama Outgoing Dial Guard (msec): 75
                                      Outgoing Glare Guard (msec): 1000
                                      Cama Wink Start Time (msec): 5000
 Outgoing End of Dial (sec): 1    Outgoing Seizure Response (sec): 4
                                    Disconnect Signal Error (sec): 30
                                                                    Page 5 of 11
                                TRUNK GROUP
                                       Administered Members (min/max):  1/2
GROUP MEMBER ASSIGNMENTS                   Total Administered Members:  2
     Port   Code   Sfx  Name
 1: 01C0401 TN429   C
 2: 01C0402 TN429   C
 3:
 4:
 5:
 6:
 7:
 8:
 9.
 10:
 11:
 12:
 13: 
						

							DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-80 CAMA/E911 Installation 
1
10. At the promp t, type change feature-access-code
 and press En t e r.
Screen 1-6. Feature Access Code (FAC) form (page 1)
11. The Feature Ac c ess Cod e (FAC) sc reen (p ag e 1) ap p ears.
12. In the Auto Route Selection (ARS) Access Code 1:
 field, 
ad minister the ARS ac c ess c od e (in the examp le above, typ e 9
) and press 
En t e r  (must matc h d ial p lan).
13. At the promp t, enter change ars analysis 
  and p ress 
En t e r.
                                 Page 1 of 5
                                FEATURE ACCESS CODE (FAC)
             Abbreviated Dialing List1 Access Code: ____
             Abbreviated Dialing List2 Access Code: ____
             Abbreviated Dialing List3 Access Code: ____
Abbreviated Dial - Prgm Group List Access Code: ____
                          Announcement Access Code: ____
                           Answer Back Access Code: ____
          Auto Alternate Routing (AAR) Access Code: ____
          Auto Route Selection (ARS) Access Code 1: 9___  Access Code 2: ____
                     Automatic Callback Activation: ____   Deactivation: ____
Call Forwarding Activation Busy/DA: ____ All: ____  Deactivation: ____
                             Call Park Access Code: ____
                           Call Pickup Access Code: ____
   CAS Remote Hold/Answer Hold-Unhold Access Code: ____
                      CDR Account Code Access Code: ____
Change Coverage: ____
                      Data Origination Access Code: ____
                          Data Privacy Access Code: ____
Directed Call Pickup Access Code: ____
         Emergency Access To Attendant Access Code: ____
Extended Call Fwd Activate Busy D/A: ____  All: ____  Deactivation: ____
                   Facility Test Calls Access Code: ____
                                 Flash Access Code: ____ 
						

							DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-81 CAMA/E911 Installation 
1
Screen 1-7. ARS Digit Analysis Table
14. On ARS Dig it Analysis Tab le sc reen app ears. In the Dialed String
 
field , in the first emp ty row, enter 11
.
15. In the Total Mn
 field , enter 2
.
16. In the Total Mx
 field , enter 2
.
17. In the Rte Pat
 field , enter the d esired  Route Pattern (in the examp le 
ab ove the route p attern is 11).
NOTE:
For the following  step , if you are using the Attend ant Crisis Alerting  
feature, typ e alrt
 instead  of “ emer.”
18. In Call Type
 field , enter emer
.
19. On the next emp ty row, in the Dialed String
 field , typ e 911
.
20. In the Total Mn
 field , enter 3
.
21. In the Total Mx
 field , enter 3
.
22. In the Rte Pat
 field , typ e the d esired  Route Pattern (in the example 
ab ove the route p attern is 12).
NOTE:
For the following  step , if you are using the Attend ant Crisis Alerting  
feature, typ e alrt
 instead  of “ emer.”
23. In the Call Type
 field , enter emer
 and press 
En t e r.
                              ARS DIGIT ANALYSIS TABLE
                            Partitioned Group Number:  _     Percent Full:    ___
Dialed      Total  Rte Call Nd  ANI Dialed      Total  Rte Call Nd ANI
     String      Mn Mx  Pat Type Num Rq String      Mn Mx  Pat Type Num Rq
9________________ 7_ 7_  2__ hnpa ___ n __________________ __ __ ___ ____ ___ _
976______________ 7_ 7_  den hnpa ___ n __________________ __ __ ___ ____ ___ _
11_______________ 2_ 2_  11_ emer ___ n __________________ __ __ ___ ____ ___ _
911______________ 3_ 3_  12_ emer ___ n __________________ __ __ ___ ____ ___ _
_________________ __ __  ___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __  ___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __  ___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __  ___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __  ___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __  ___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __  ___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __  ___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __  ___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __  ___ ____ ___ _ __________________ __ __ ___ ____ ___ _
_________________ __ __  ___ ____ ___ _ __________________ __ __ ___ ____ ___ _ 
						

							DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-82 CAMA/E911 Installation 
1
24. At the p rompt, typ e change route-pattern 
 
(the route pattern to 
b e c hanged ; in the examp le b elow, the route pattern is 11) and  p ress 
En te r.
Screen 1-8. Route Pattern form (Page 1)
25. On the Route Pattern sc reen, in Grp. No
. field , enter the CAMA trunk 
g roup number.
26. In the FRL
 field , enter 0
.
NOTE:
For the following  step , if the Central Offic e (CO) wants KP11ST as 
the d ialed dig it string , then leave b lank.  If the CO wants KP911ST, 
then insert a “ 9”  in the Inserted Digits
 field .
27. Ad minister the Inserted Digits
 field  if need ed  and  p ress 
En t e r.
                      Page 1 of X
  Pattern Number: 11               
    Grp.  FRL NPA Pfx Hop Toll No. Del Inserted                             IXC
    No.           Mrk Lmt List Digits  Digits
 1: 1__   0  ___  _  __   __    __    ____________________________________ user
 2: ___   _  ___  _  __   __    __    ____________________________________ user
 3: ___   _  ___  _  __   __    __    ____________________________________ user
 4: ___   _  ___  _  __   __    __    ____________________________________ user
 5: ___   _  ___  _  __   __    __    ____________________________________ user
 6: ___   _  ___  _  __   __    __    ____________________________________ user
BCC VALUE  TSC CA-TSC   ITC BCIE Service/Feature           Numbering LAR
0 1 2 3 4 W    Request                                       Format
  1: y y y y y n  y none_____ both ept  outwats-bnd____ BAND: ___ ________  none
  2: y y y y y n  n           rest      _______________           ________  next
  3: y y y y y n  n           rest      _______________           ________  rehu
  4: y y y y y n  n           rest      _______________           ________  none
  5: y y y y y n  n           rest      _______________           ________  none
  6: y y y y y n  n           rest      _______________           ________  none 
						

							DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-83 CAMA/E911 Installation 
1
28. At the p rompt, typ e change route-pattern 
  (the route pattern to 
b e c hanged ; in the examp le b elow, the route pattern is 12) and  p ress 
En te r.
Screen 1-9. Route Pattern form (Page 1)
29. On the Route Pattern sc reen, in Grp. No
. field , typ e the CAMA trunk 
g roup number and  p ress 
En te r.
30. In the FRL
 field , typ e 0
.
NOTE:
For the following  step , if the Central Offic e (CO) wants KP911ST as 
the d ialed dig it string , then leave b lank.  If the CO wants KP11ST, 
then d elete one d ig it.
31. Ad minister No. Del Digits
 field  if need ed  and  p ress 
En t e r.
32. At the promp t, type change cama-numbering
 and press 
En t e r.
                      Page 1 of X
  Pattern Number: 12               
    Grp.  FRL NPA Pfx Hop Toll No. Del Inserted                             IXC
    No.           Mrk Lmt List Digits  Digits
 1: 1__   0  ___  _  __   __    1_    ____________________________________ user
 2: ___   _  ___  _  __   __    __    ____________________________________ user
 3: ___   _  ___  _  __   __    __    ____________________________________ user
 4: ___   _  ___  _  __   __    __    ____________________________________ user
 5: ___   _  ___  _  __   __    __    ____________________________________ user
 6: ___   _  ___  _  __   __    __    ____________________________________ user
BCC VALUE  TSC CA-TSC   ITC BCIE Service/Feature           Numbering LAR
0 1 2 3 4 W    Request                                       Format
  1: y y y y y n  y none_____ both ept  outwats-bnd____ BAND: ___ ________  none
  2: y y y y y n  n           rest      _______________           ________  next
  3: y y y y y n  n           rest      _______________           ________  rehu
  4: y y y y y n  n           rest      _______________           ________  none
  5: y y y y y n  n           rest      _______________           ________  none
  6: y y y y y n  n           rest      _______________           ________  none 
						

							DEFINITY ECS Release 8.2 Installation, Upgrades, 
and Additions for Compact Modular Cabinets  555-233-118  Issue 1
April 2000
Installing and Cabling the Cabinets 
1-84 CAMA/E911 Installation 
1
Screen 1-10. CAMA Numbering Format form
33. In the CAMA Numb ering  - E911 Format sc reen (p ag e 1), in System 
CESID Default:
 field , enter your own system d efault and p ress 
En t e r.  
This is the numb er outp ulsed  when the extension c od e is not found in the 
CAMA Numb ering  tab le. See Screen 1-10
.
34. In the Ext Len
, Ext Code
, CESID
, and  Total Length
 field s, fill out to 
your own CAMA numb ering  p lan and  p ress 
En te r. Be sure to c over all 
extensions.
35. At the promp t, typ e change cor 
 
(the c lass of restriction (COR) 
to be changed) and press 
En t e r. Chang e all CORs that are defined  for 
stations in ord er to remove any c alling  p arty restric tions for 911 c alls.
                                                                     Page 1 of 3
                         CAMA NUMBERING - E911 FORMAT
System CESID Default: 5241100______
Ext  Ext                   Total         Ext  Ext                   Total
Len Code      CESID      Length         Len  Code      CESID      Length
4_  101__  5381234_____    7_             __  _____  __________     __
4_  1____  555_________    7_             __  _____  ___________    __
__  _____  ____________    __             __  ______ ___________    __
__  _____  ____________    __             __  ______ ___________    __
__  _____  ____________    __             __  ______ ___________    __
__  _____  ____________    __             __  ______ ___________    __
__  _____  ____________    __             __  ______ ___________    __
__  _____  ____________    __             __  ______ ___________    __
__  _____  ____________    __             __  ______ ___________    __
__  _____  ____________    __             __  ______ ___________    __
__  _____  ____________    __             __  ______ ___________    __
__  _____  ____________    __             __  ______ ___________    __