Dell 1355cn User Guide
Have a look at the manual Dell 1355cn User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Understanding the Tool Box Menus339 using the chart. Color registration adjustment need to be made during the initial setup of the printer or when the printer is moved to a different location. Va l u e s : Auto Registration AdjustmentOn*Automatically adjusts color registration. OffDoes not automatically adjust color registration. Auto Correct *1Click Start to automatically correct color registration. Print Color Regi Chart *1,*2Click Start to print a color registration chart. Color Registration Adjustment 1 (Lateral) *1 Ye l l o w 0 *Specifies lateral (perpendicular to paper feed direction) color adjustment values individually. -5–+5 Magenta 0* -5–+5 Cyan 0* -5–+5 Color Registration Adjustment 2 (Process) *1 LY ( L e f t Yellow)0*Specifies process (paper feed direction) color adjustment values individually. -5–+5 LM(Left Magenta)0* -5–+5 LC(Left Cyan)0* -5–+5 RY(Right Yellow)0* -5–+5 RM(Right Magenta)0* -5–+5 RC(Right Cyan)0* -5–+5 Apply New SettingsAfter you complete the settings, press the Apply New Settings button to apply the changes.
340Understanding the Tool Box Menus Adjust Altitude Purpose: To specify the altitude of the location where the printer is installed. The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are performed by specifying the altitude of the location where the printer is being used. NOTE: An incorrect altitude adjustment setting leads to poor printing quality, incorrect indication of remaining toner. Va l u e s : Reset Defaults Purpose: To initialize NVM (non-volatile memory) for system parameters or Address Book data. After executing this function and rebooting the printer, the menu parameters or data are reset to their default values. For details, see Resetting Defaults on page 357. Va l u e s : *1 This item is available only when Auto Registration Adjustment is set to Off.*2 The color registration chart prints a lattice pattern of yellow, magenta, and cyan lines. On the chart, find the values on the right side that are next to the line that is perfectly straight for each of the three colors. If the value for this line is 0, color registration is not needed. If the value for this line is any value other than 0, specify the adjustment values under Color Registration Adjustment. 0 meter*Specifies the altitude of the location where the printer is installed. 1000 meters 2000 meters 3000 meters Apply New SettingsAfter you complete the settings, press the Apply New Settings button to apply the changes. System SectionClick to initialize the system parameters.
Understanding the Tool Box Menus341 Non-Dell Toner Purpose: To use toner cartridge of another manufacturer. NOTE: Using non-Dell-brand toner cartridges may make some printer features unusable, reduce print quality and decrease the reliability of your printer. Dell recommends only new Dell-brand toner cartridges for your printer. Dell does not provide warranty coverage for problems caused by using accessories, parts, or components not supplied by Dell. NOTE: Before you use toner cartridge of another manufacturer, be sure to restart the printer. Va l u e s : BTR Refresh Mode Purpose: To execute counter measures for curling/separating discharge of the paper. Va l u e s : User Fax SectionClick to initialize the fax number entries in the Address Book. User Scan SectionClick to initialize the e-mail and server address entries in the Address Book. Non-Dell To n e rOff*Does not use toner cartridge of another manufacturer. OnUses toner cartridge of another manufacturer. Apply New SettingsAfter you complete the settings, press the Apply New Settings button to apply the changes. BTR Refresh ModeOff *Does not automatically execute counter measures for curling/separating discharge of the paper. OnAutomatically executes counter measures for curling/separating discharge of the paper. Apply New SettingsAfter you complete the settings, press the Apply New Settings button to apply the changes.
342Understanding the Tool Box Menus Web Link Customization Purpose: To specify a link used for ordering consumables. Va l u e s : TCP/IP Settings Purpose: To configure TCP/IP settings. Va l u e s : Select Reorder URLSelect the Regular or Premier URL. Regular*Displays the regular web address (http://accessories.us.dell.com/sna). PremierDisplays the premier web address (http://premier.dell.com). Apply New SettingsAfter you complete the settings, press the Apply New Settings button to apply the changes. IP Address ModeAutoIP*Automatically sets the IP address. BOOTPUses BOOTP to set the IP address. RARPUses RARP to set the IP address. DHCPUses DHCP to set the IP address. Pa n e lManually sets the IP address. IP AddressManually sets the IP address allocated to the printer. Subnet MaskManually sets the subnet mask. Gateway AddressManually sets the gateway address. Apply New SettingsAfter you complete the settings, press the Apply New Settings button to apply the changes. Restart printer to apply new settingsPress the Restart printer to apply new settings button to apply the changes.
Understanding the Tool Box Menus343 Tray Settings Purpose: To specify the paper size and type of paper loaded in the Multipurpose Feeder (MPF). Va l u e s : Paper Type Plain*Specifies the type of paper loaded in the MPF. Plain Thick Covers Coated Label Recycled Envelope Plain Side 2 Plain Thick Side 2 Covers Side 2 Coated Side 2 Recycled Side 2
344Understanding the Tool Box Menus Pa p e r S i z e A 4*1Specifies the size of paper loaded in the MPF. A5 B5 Letter *1 Folio Legal Executive Envelope #10 Monarch Monarch Landscape DL DL Landscape C5 Custom Size Custom Size - Y297 mm*/11.7 inch*Specifies the length of custom size paper. 127–355 mm/5.0–14.0 inch Custom Size - X210 mm*/8.3 inch*Specifies the width of custom size paper. 77–215 mm/3.0–8.5 inch Display Po p u pOn*Displays a popup menu that prompts the user to set Paper Type and Pa p e r S i z e when the paper is loaded in the MPF. OffDoes not display a popup menu. Apply New SettingsAfter you complete the settings, press the Apply New Settings button to apply the changes.
Understanding the Tool Box Menus345 EWS (Embedded Web Server or Dell Printer Configuration Web Tool) Purpose: To display the server settings of the Dell Printer Configuration Web Tool. NOTE: When the printer is connected to the USB port, this setting cannot be displayed. Va l u e s : Scan Defaults Purpose: To create your own default Scan settings. Va l u e s : *1 The default for Paper Size varies depending on country-specific factory default. Print Server SettingsClick Display to display the server settings for the Dell Printer Configuration Web Tool. Display of EWSOn*Turns on the display of the server settings for the Dell Printer Configuration Web Tool. OffTurns off the display of the server settings for the Dell Printer Configuration Web Tool. Apply New SettingsAfter you complete the settings, press the Apply New Settings button to apply the changes. Scan To NetworkComputer (Network)*Stores the scanned image on a computer using the Server Message Block (SMB) protocol. Server (FTP)Stores the scanned image on a server using the FTP protocol. File Format TIFFSaves the scanned image in TIFF. PDF*Saves the scanned image in PDF. JPEGSaves the scanned image in JPEG.
346Understanding the Tool Box Menus Color Black & WhiteScans in black and white mode. GrayScaleScan in grayscale mode. Color*Scans in color mode. Color(Photo)Scans in color mode. This is suitable for photographic images. Resolution 200*Scans an image at 200dpi. 300Scans an image at 300dpi. 400Scans an image at 400dpi. 600Scans an image at 600dpi. Document SizeA4 *1Sets the document size to A4. A5Sets the document size to A5. B5Sets the document size to B5. Letter *1Sets the document size to Letter. FolioSets the document size to Folio. LegalSets the document size to Legal. ExecutiveSets the document size to Executive. Lighter/Dark erLighter 2Makes the scanned image lighter than the original. Works well with dark print. Lighter 1 Normal*Works well with standard typed or printed documents. Darker 1Makes the scanned image darker than the original. Works well with light print or faint pencil markings. Darker 2 Sharpness SoftestMakes the scanned image softer than the original. Softer Normal*Does not make the scanned image sharper or softer than the original. SharperMakes the scanned image sharper than the original. Sharpest Auto ExposureOn*Suppresses the background of the original to enhance text on the scanned image. OffDoes not suppress the background.
Understanding the Tool Box Menus347 Fax Defaults Purpose: To create your own default Fax settings. Va l u e s : Margin To p / B o t t o m2 mm*/0.1 inch*Specifies the value of the top and bottom margins. 0–50 mm/0.0–2.0 inch Margin Left/Right2 mm*/0.1 inch*Specifies the value of the left and right margins. 0–50 mm/0.0–2.0 inch Margin Middle0 mm*/0.0 inch* Specifies the value of the middle margin. 0–50 mm/0.0–2.0 inch Image CompressionHighSets the image compression level to High. Medium*Sets the image compression level to Medium. LowSets the image compression level to Low. Max E-Mail SizeSets the maximum size of e-mail that can be sent, within the range of 50 K bytes to 16384 K bytes. The default is 2048 K bytes. Apply New SettingsAfter you complete the settings, press the Apply New Settings button to apply the changes. *1 The default for Document Size varies depending on country-specific factory default.
348Understanding the Tool Box Menus Copy Defaults Purpose: To create your own default Copy settings. Va l u e s : Resolution Standard*Suitable for documents with normal sized characters. Fi neSuitable for documents containing small characters or thin lines or documents printed using a dot-matrix printer. Super FineSuitable for documents containing extremely fine detail. The super fine mode is enabled only if the remote machine also supports the Super Fine resolution. Ultra FineSuitable for documents containing photographic images. Lighter/Dark erLighter 2Makes the fax lighter than the original. Works well with dark print. Lighter 1 Normal*Works well with standard typed or printed documents. Darker 1Makes the fax darker than the original. Works well with light print or faint pencil markings. Darker 2 Delayed Start 21:00*Sets the fax transmission start time when sending a fax at a specified time. 00:00–23:59 Apply New SettingsAfter you complete the settings, press the Apply New Settings button to apply the changes. Restart printer to apply new settingsPress the Restart printer to apply new settings button to apply the changes. Color Black & WhitePrints in black and white mode. Color*Prints in color mode.