Home > Dell > Printer > Dell 1355cn User Guide

Dell 1355cn User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Dell 1355cn User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 522
    							Loading Print Media209
     NOTICE: Never use envelopes with windows, or coated linings. These lead to 
    paper jams and can cause damage to the printer.
     
    NOTE: If you do not load envelopes in the MPF right after they have been removed 
    from the packaging, they may bulge. To avoid jams, flatten them as shown below 
    when loading them in the MPF.
     
    NOTE: If envelopes are still not fed correctly, add some bending to the flap of the 
    envelopes as shown in the following illustration.
    The amount of the bending shall be 5 mm (0.20 inches) or less.
     
    						
    							210Loading Print Media
     NOTE: To confirm the correct orientation of each print media such as envelopes, 
    see the instruction on the Envelope/Paper Setup Navigator on the printer driver.
    Loading Letterhead
    Load the letter head in the printer with the print side facing up. Ensure that 
    the title on the letter head enters the printer first.
     
    						
    							Loading Print Media211
    Loading Print Media in the Priority Sheet Inserter 
    (PSI)
     NOTE: To avoid paper jams, do not remove the PSI while printing is in progress.
     
    NOTE: Use only laser print media. Do not use ink jet paper in this printer.
    1Open the front cover.
    2Slide the PSI forward, and then align the PSI to the marking on the paper 
    tray.
     
    						
    							212Loading Print Media
    3Adjust the paper width guides to their maximum width.
    4Before loading the print media, flex the sheets back and forth, and then 
    fan them. Straighten the edges of the stack on a level surface.
     
    						
    							Loading Print Media213
    5Load print media on the PSI with the top edge first and with the 
    recommended print side facing up.
    6Adjust the width guides until they rest lightly against the edges of the 
    stack of print media.
     
    						
    							214Loading Print Media
    7Select the paper type from the printer driver if the loaded print media is 
    not standard plain paper. If a user-specified print media is loaded in the 
    PSI, you must specify the paper size setting by using the printer driver.
    Loading an Envelope in the Priority Sheet Inserter (PSI)
     NOTE: Be sure to fully insert the envelope until it stops. Otherwise, print media that 
    is loaded on the MPF will be fed.
     
    NOTE: When you print on envelopes, be sure to specify the envelope setting on the 
    printer driver. If not specified, the print image will be rotated 180 degrees.
    When Loading Envelope#10, DL, or Monarch
    Load envelopes with the side to be printed on facing up, the flap side facing 
    down, and the flap turned to the right.
     
    						
    							Loading Print Media215
    To prevent DL and Monarch from being wrinkled, they are recommended to 
    be loaded with the print-side facing up, flap opened, and facing you.
    When Loading C5
    Load envelopes with the side to be printed on facing up, with the flap open.
     
    						
    							216Loading Print Media
     NOTICE: Never use envelopes with windows, or coated linings. These lead to 
    paper jams and can cause damage to the printer.
     
    NOTE: If you do not load envelopes in the PSI right after they have been removed 
    from the packaging, they may bulge. To avoid jams, flatten them as shown below 
    when loading them in the PSI.
     
    NOTE: If envelopes are still not fed correctly, add some bending to the flap of the 
    envelopes as shown in the following illustration.
    The amount of the bending shall be 5 mm (0.20 inches) or less.
     
    						
    							Loading Print Media217
     NOTE: To confirm the correct orientation of each print media such as envelopes, 
    see the instruction on the Envelope/Paper Setup Navigator on the printer driver.
    Loading Letterhead
    Load the letter head in the printer with the print side facing up. Ensure that 
    the title on the letter head enters the printer first.
     
    						
    							218Loading Print Media
    Manual Duplex Printing (Windows Printer Driver 
    Only)
     NOTE: When printing on curled paper, straighten the paper and then insert it into 
    the feeder.
     
    NOTE: The XPS printer driver does not support manual duplex printing.
    When you start manual duplex printing, the instruction window appears. 
    Note that the window cannot be reopened once it is closed. Do not close the 
    window until duplex printing is complete.
    Manual duplex printing can be done using the multipurpose feeder or the 
    priority sheet inserter.
    The Multipurpose Feeder (MPF)
    1First print the even pages (rear sides).
    For a six page document, rear sides are printed in the order of page 6, page 
    4, then page 2.
     
    (Data LED) blinks and the message appears on the LCD when the 
    even pages finish printing.
    2After the even pages are printed, remove the paper stack from the output 
    tray and set them as they are (with the blank side facing up).
     NOTE: Warped or curled prints can cause paper jams. Straighten them 
    before setting them.
     
    						
    All Dell manuals Comments (0)

    Related Manuals for Dell 1355cn User Guide