Dell 1355cn User Guide
Have a look at the manual Dell 1355cn User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Print Media Guidelines199 Paper Type Specifications Paper type Weight (gsm) Remarks Plain Paper 60-90 - Plain Thick Paper 91-105 - Covers 106-163 - Coated 106-163 Inkjet printer paper cannot be used. Label - Inkjet printer paper cannot be used. Envelopes - - Recycled 60-105 -
Loading Print Media201 13 Loading Print Media Loading print media properly helps prevent jams and ensures trouble-free printing. Before loading print media, identify the recommended print side of the print media. This information is usually on the print media package. NOTE: After loading paper in the feeder, specify the same paper type on the operator panel. Capacity Multipurpose Feeder (MPF) can hold: • 150 sheets of standard paper • 16.2 mm (0.64 inches) of thick paper • One sheet of coated paper • 16.2 mm (0.64 inches) of post cards • Five envelopes • 16.2 mm (0.64 inches) of labels Priority Sheet Inserter (PSI) can hold: • 10 sheets of standard paper or one sheet of other paper Print Media Dimensions Both MPF and PSI accept print media within the following dimensions: • Width — 76.2 mm (3.00 inches) to 215.9 mm (8.50 inches) • Length — 127.0 mm (5.00 inches) to 355.6 mm (14.00 inches)
202Loading Print Media Loading Print Media in the Multipurpose Feeder (MPF) NOTE: Use only laser print media. Do not use ink jet paper in this printer. 1Open the front cover. 2Pull the priority sheet inserter (PSI) out. 3Pull the length guide forward until it stops.
Loading Print Media203 4Pull the MPF extension forward until it stops. 5Adjust the paper width guides to their maximum width.
204Loading Print Media 6Before loading the print media, flex the sheets back and forth, and then fan them. Straighten the edges of the stack on a level surface. 7Load print media on the MPF with the top edge first and with the recommended print side facing up.
Loading Print Media205 8Adjust the width guides until they rest lightly against the edges of the stack of print media. 9Slide the length guide towards the printer until it touches the print media.
206Loading Print Media NOTE: Depending on the size of print media, first slide the MPF extension backward until it stops, and then pinch the length guide and slide it backward until it touches print media. 10Insert the PSI into the printer and then align the PSI to the marking on the paper tray.
Loading Print Media207 11Select the paper type from the operator panel if any print media other than plain print media is loaded. If a user-specified print media is loaded in the MPF, you must specify the paper size setting by using the operator panel. NOTE: For standard-size papers, adjust the guides first and then set papers. Loading an Envelope in the Multipurpose Feeder (MPF) NOTE: When you print on envelopes, be sure to specify the envelope setting on the printer driver. If not specified, the print image will be rotated 180 degrees. When Loading Envelope#10, DL, or Monarch Load envelopes with the side to be printed on facing up, the flap side facing down, and the flap turned to the right.
208Loading Print Media To prevent DL and Monarch from being wrinkled, they are recommended to be loaded with the print-side facing up, flap opened, and facing you. When Loading C5 Load envelopes with the side to be printed on facing up, with the flap open.