Cisco 6500e Manual
Have a look at the manual Cisco 6500e Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 53 Cisco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1-59 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Chapter 1 Product Overview Catalyst 6509-V-E Switch Ta b l e 1 - 2 0 lists the environmental and physical specifications of the Catalyst 6509-V-E switch chassis. Table 1-20 Catalyst 6509-V-E Switch Specifications Item Specification Environmental Temperature, operating Certified for operation: 32° to 104°F (0° to 40°C) Designed and tested for operation: 32° to 131°F (0° to 55°C) NoteThe Catalyst 6500 series switches are equipped with internal air temperature sensors that are triggered at 104°F (40°C) generating a minor alarm and at 131°F (55°C) generating a major alarm. Temperature, nonoperating and storageChassis unpackaged: –4° to 149°F (–20° to 65°C) Chassis in protective shipping package: –40° to 158°F (–40° to 70°C) Thermal transition 0.5°C per minute (hot to cold) 0.33°C per minute (cold to hot) Humidity (RH), ambient (noncondensing) operating 5% to 90% Humidity (RH), ambient (noncondensing) nonoperating and storage 5% to 95% Altitude, operating Certified for operation: 0 to 6500 ft (0 to 2000 m) Designed and tested for operation: –200 to 10,000 ft (–60 to 3000 m) Shock and vibration This switch complies with Network Equipment Building Systems (NEBS) (Zone 4 per GR-63-Core) in the following areas: Earthquake environment and criteria Office vibration and criteria Transportation vibration and criteria Shock Operational—5 G 30 ms, half-sine (IEC 68-2-27) Nonoperational—20 G, 7.5 ms, trapezoidal Vibration Operational—3 Hz to 500 Hz. Power Spectral Density (PSD)—0.0005 G2/Hz at 10 Hz and 200 Hz. 5 dB/octave roll off at each end. 0.5 hours per axis (1.12 Grms). Acoustic noise 67 to 77 dB. International Organization for Standardization (ISO) 7779: Bystander position operating to an ambient temperature of 86°F (30°C).
1-60 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Chapter 1 Product Overview Catalyst 6509-V-E Switch Physical characteristics Dimensions (H x W x D) 36.65 x 17.20 x 20.7 in. (93.3 x 43.1 x 53.3 cm). Chassis requires 21 RU1. The Catalyst 6509-V-E switch chassis is designed to install in standard 19-inch equipment racks that meet ANSI/EIA 310-D, IEC 60297, and ETS 300-119 standards. Weight Chassis only: 121 lb (54.9 kg). Chassis fully configured with 1 supervisor engine, 8 modules, 2 AC-input power supplies: 270 lb (122.47 kg). Airflow WS-C6509-V-E-FAN (High-speed fan tray)—760 CFM NoteTo maintain proper air circulation through the Catalyst switch chassis, we recommend that you maintain a minimum 6-inch (15 cm) separation between a wall and the chassis air intake or a wall and the chassis air exhaust. You should also allow a minimum separation of 12 inches (30.5 cm) between the hot air exhaust on one chassis and the air intake on another chassis. Failure to maintain adequate air space can cause the chassis to overheat and the system to fail. On Catalyst chassis in which the airflow is from front to back, the chassis may be placed side-by-side. 1. RU = rack units Table 1-20 Catalyst 6509-V-E Switch Specifications (continued) Item Specification
1-61 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Chapter 1 Product Overview Catalyst 6513 Switch Catalyst 6513 Switch The Catalyst 6513 switch is a 13-slot horizontal chassis supporting redundant power supplies, redundant supervisor engines, and slots for up to twelve modules. The chassis is NEBS L3 compliant. Figure 1-14 shows a front view of the Catalyst 6513 switch chassis. Figure 1-14 Catalyst 6513 Switch INPUT OKFA N OKOUTPUT FA I L o INPUT OKFA N OKOUTPUT FA I L o 48121 Power supply 1Power supply 2 (redundant) FA N STATUS 8 PORT GIGABIT ET HERNETWS-X64081L IN KSTATUS2 34 5 6 7 8L IN KLIN KL IN KL INKL IN KLIN KL IN K 2 4 P O R T 1 0 0 F XW S - X 6 2 2 4S T A T U S 2 4 P O R T 1 0 0 F XW S - X 6 2 2 4S T AT U S 2 4 P O R T 1 0 0 F XW S - X 6 2 2 4S T A T U S 2 4 P O R T 1 0 0 F XW S - X 6 2 2 4S T A T U S 1LINK2LINK3LINK4LINK5LINK6LINK7LINK8LINK9LINK1 0LINK1 1LINK1 2LINK1 3LINK1 4LINK1 5LINK1 6LINK1 7LINK1 8LINK1 9LINK2 0LINK2 1LINK2 2LINK2 3LINK2 4LINK1L I N K2L I N K3L I N K4L I N K5L I N K6L I N K7L I N K8L I N K9L I N K1 0L I N K1 1L I N K1 2L I N K1 3L I N K1 4L I N K1 5L I N K1 6L I N K1 7L I N K1 8L I N K1 9L I N K2 0L I N K2 1L I N K2 2L I N K2 3L I N K2 4L I N K1L I N K2L I N K3L I N K4L I N K5L I N K6L I N K7L I N K8L I N K9L I N K10L I N K11L I N K12L IN K13L I N K14L I N K15L I N K16L I N K17L IN K18L I N K19L I N K20L I N K21L I N K22L I N K23L I N K24L IN K1L I N K2L I N K3L IN K4L IN K5L I N K6L I N K7L IN K8L I N K9L IN K1 0L IN K1 1L I N K1 2L IN K1 3L I N K1 4L I N K1 5L I N K1 6L IN K1 7L I N K1 8L IN K1 9L I N K2 0L IN K2 1L IN K2 2L I N K2 3L I N K2 4L I N K 1 2 3 4 5 6 7 8 9 10 11 12 13 WS- S UP32 -G E - 3BS TAT U S S YS TE M AC TIVE P W R MG MT RESETCA TA L YST 65 00 S U P ERV ISO R E N GINE 3 2C ON SOLE EJE CTD IS K 0PORT 1 PO R T 2 PORT 3 POR T 4PO RT 5 PO RT 6 PORT 7POR T 8POR T 9 U SB 2.0L IN K LI NK L IN K L INK L IN K L IN K L I NK L IN K L I NKWS-S UP32 -G E -3BSTAT U S S YS TEM AC TIVE PW R MG M T RESETCA TA L Y ST 6 5 00 S U P ERV ISO R E NGIN E 32C ON SOLE EJE CTD I S K 0PORT 1 PO RT 2 PORT 3 PORT 4PO RT 5 PO RT 6 PORT 7POR T 8PORT 9 U SB 2. 0L IN K LI NK L IN K L INK L IN K L IN K L I NK L IN K L I N K Switching modules Switching modules Fan assembly Supervisor engine Redundant supervisor engine
1-62 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Chapter 1 Product Overview Catalyst 6513 Switch Ta b l e 1 - 2 1 lists the features of the Catalyst 6513 switch chassis. Table 1-21 Catalyst 6513 Switch Features Feature Description Chassis Thirteen horizontal slots. Slots are numbered from (1) top to (13) bottom. Supervisor engines Supports Supervisor Engine 2, Supervisor Engine 32, Supervisor Engine 32 PISA, Supervisor Engine 720, and Supervisor Engine 720-10GE. NoteRefer to your software release notes for the minimum software release versions required to support the supervisor engines. –Supervisor Engine 2 must be installed in slot 1 and slot 2. –Supervisor Engine 32, Supervisor Engine 32 PISA, Supervisor Engine 720, and Supervisor Engine 720-10GE must be installed in slot 7 and slot 8. NoteSlots not occupied by supervisor engines can be used for modules. Check your software release notes for any restrictions on the type of module that can be installed. Supervisor Engine 32, Supervisor Engine 32 PISA, Supervisor Engine 720, and Supervisor Engine 720-10GE require that you install the high-speed fan tray (WS-C6K-13SLT-FAN2) be installed in the chassis. You must also install a 2500 W or higher capacity power supply in the chassis to power the high-speed fan tray. Supervisor Engine 720 and Supervisor Engine 720-10GE have a built-in switching fabric. Switch Fabric Modules (WS-C6500-SFM and WS-X6500-SFM2) are not supported by Supervisor Engine 720 and Supervisor Engine 720-10GE. Supervisor Engine 32 and Supervisor Engine 32 PISA do not support the Switch Fabric Modules (WS-C6500-SFM and WS-X6500-SFM2). The uplink ports are fully functional on all redundant supervisor engine models when they are in standby mode. NoteIn systems with redundant supervisor engines, both supervisor engines must be the same model and have the same daughter card configurations. Each supervisor engine must have the resources to run the switch on its own, which means that all supervisor engine resources are duplicated. Identical supervisor engine memory configurations are recommended, but are not required as long as the supervisor engine with the smaller memory configuration is sufficient to run the configured features of the switch. Additionally, each supervisor engine must have its own flash device and console port connections.
1-63 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Chapter 1 Product Overview Catalyst 6513 Switch ModulesSupports up to 12 Catalyst 6500 series modules. When using a Supervisor Engine 2 the WS-C6500-SFM and WS-X6500-SFM2 Switch Fabric Modules must be installed in slot 7 or slot 8. NoteMixing WS-C6500-SFM and WS-X6500-SFM2 Switch Fabric Modules is not allowed in the Catalyst 6513 chassis. Slots 1–8 support a single fabric channel; slots 9–13 support dual fabric channels. The following modules are supported only in chassis slots 9–13 and do not power up when they are installed in the other chassis slots: –WS-X6748-SFP –WS-X6748-GE-TX –WS-X6704-10GE –WS-X6708-10GE –WS-X6716-10GE –WS-X6816-GBIC –WS-SVC-WISM-1-K9 NoteThe WS-X6724-SFP Ethernet module has a single fabric channel and is supported in all Catalyst 6513 switch chassis slots. Check your software release notes for specific information on module support. Some Catalyst 6500 series modules may: –Not be supported –Require that you install a Supervisor Engine 720 –Have chassis slot restrictions –Require a specific software release level to operate Backplane bandwidth 32 GBps shared bus. 256 GBps switch fabric. 720 GBps switch fabric. Clock and VTT module Two replaceable clock modules (WS-C6513-CL=) provide clocking signals to the EOBC channel and the switching bus. Three replaceable voltage termination (VTT) modules (WS-C6K-VTT=) provide reference voltage for bus signals. Table 1-21 Catalyst 6513 Switch Features (continued) Feature Description
1-64 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Chapter 1 Product Overview Catalyst 6513 Switch Fan trayThe chassis supports one hot-swappable fan tray. Two fan tray models are available: –WS-C6K-13SLOT-FAN (Standard fan tray—641 CFM). Supports Supervisor Engine 2 only; does not provide sufficient cooling for the Supervisor Engine 32, Supervisor Engine 32 PISA, Supervisor Engine 720, or the Supervisor Engine 720-10GE. –WS-C6K-13SLT-FAN2 (Optional high-speed fan tray—1090 CFM). Provides sufficient cooling for all supervisor engine types. NoteYou must install a high-speed fan tray when using a Supervisor Engine 32 or a Supervisor Engine 720. You must install a 2500 W or higher capacity power supply in the chassis to power the high-speed fan tray. The 2500 W power supply can be powered from either 120 VAC or 220 VAC. NoteBoth fan tray models contain 15 individual fans. The individual fans are not field replaceable; you must replace the fan tray in the event of a fan failure. Fan tray STATUS LED –Red—One or more individual fans have failed. –Green—Fan tray is operating normally. Table 1-21 Catalyst 6513 Switch Features (continued) Feature Description
1-65 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Chapter 1 Product Overview Catalyst 6513 Switch Power supplySupports one or two power supplies. The following models are supported: –WS-CAC-2500W (2500 W AC-input power supply). –WS-CDC-2500W (2500 W DC-input power supply). –WS-CAC-3000W (3000 W AC-input power supply). –WS-CAC-4000W-US (4000 W AC-input power supply). –WS-CAC-4000W-INT (4000 W AC-input power supply). –PWR-4000-DC (4000 W DC-input power supply). –WS-CAC-6000W (6000 W AC-input power supply). –PWR-6000-DC (6000 W DC-input power supply). –WS-CAC-8700W-E (8700 W AC-input power supply). NoteThe 8700 W power supply is limited to 6000 W maximum output when installed in the Catalyst 6513 switch chassis. Installed power supplies can be of different ratings. Installed power supplies can also be both AC-input, both DC-input, or one AC-input and one DC-input. Power supplies can be configured in either redundant or combined mode. All Catalyst 6500 series AC-input power supplies require single-phase source AC. Source AC can be out of phase between multiple power supplies or multiple AC-power plugs on the same power supply because all AC power supply inputs are isolated. You must install a 2500 W or higher capacity power supply when using the Supervisor Engine 32 or the Supervisor Engine 720 and the high-speed fan tray. NoteFor proper operation of the power supply OUTPUT FAIL LED, systems with single power supplies must be configured with a minimum of one fan tray and one supervisor engine. Systems with dual power supplies must have a minimum configuration of one fan tray, one supervisor engine, and one additional module. Failure to meet these minimum configuration requirements can cause a false power supply output fail signal. Table 1-21 Catalyst 6513 Switch Features (continued) Feature Description
1-66 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Chapter 1 Product Overview Catalyst 6513 Switch Ta b l e 1 - 2 2 lists the environmental and physical specifications of the Catalyst 6513 switch chassis. Table 1-22 Catalyst 6513 Switch Specifications Item Specification Environmental Temperature, operating Certified for operation: 32° to 104°F (0° to 40°C) Designed and tested for operation: 32° to 131°F (0° to 55°C) NoteThe Catalyst 6500 series switches are equipped with internal air temperature sensors that are triggered at 104°F (40°C) generating a minor alarm and at 131°F (55°C) generating a major alarm. Temperature, nonoperating and storageChassis unpackaged: –4° to 149°F (–20° to 65°C) Chassis in protective shipping package: –40° to 158°F (–40° to 70°C) Thermal transition 0.5°C per minute (hot to cold) 0.33°C per minute (cold to hot) Humidity (RH), ambient (noncondensing) operating 5% to 90% Humidity (RH), ambient (noncondensing) nonoperating and storage 5% to 95% Altitude, operating Certified for operation: 0 to 6500 ft (0 to 2000 m) Designed and tested for operation: –200 to 10,000 ft (–60 to 3000 m) Shock and vibration This switch complies with Network Equipment Building Systems (NEBS) (Zone 4 per GR-63-Core) in the following areas: Earthquake environment and criteria Office vibration and criteria Transportation vibration and criteria Shock Operational—5 G 30 ms, half-sine (IEC 68-2-27) Nonoperational—20 G, 7.5 ms, trapezoidal Vibration Operational—3 Hz to 500 Hz. Power Spectral Density (PSD)—0.0005 G2/Hz at 10 Hz and 200 Hz. 5 dB/octave roll off at each end. 0.5 hours per axis (1.12 Grms). Acoustic noise 61.4 to 77 dB. International Organization for Standardization (ISO) 7779: Bystander position operating to an ambient temperature of 86°F (30°C).
1-67 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Chapter 1 Product Overview Catalyst 6513-E Switch Catalyst 6513-E Switch The Catalyst 6513-E switch is a 13-slot horizontal chassis supporting redundant power supplies, redundant supervisor engines, and slots for up to twelve modules. The chassis is NEBS L3 compliant. Figure 1-15 shows a front view of the Catalyst 6513-E switch chassis. Physical characteristics Dimensions (H x W x D) 33.3 x 17.3 x 18.1 in. (84.6 x 43.7 x 46.0 cm). Chassis requires 20 RU1. The Catalyst 6513 switch chassis is designed to install in standard 19-inch equipment racks that meet ANSI/EIA 310-D, IEC 60297, and ETS 300-119 standards. Weight Chassis fully configured with 2 supervisor engines, 11 switching modules, and 2 power supplies: 280 lb (127 kg). Airflow WS-C6K-13SLOT-FAN (Standard fan tray)—641 CFM WS-C6K-13SLT-FAN2 (Optional high-speed fan tray)—1090 CFM NoteTo maintain proper air circulation through the Catalyst switch chassis, we recommend that you maintain a minimum 6-inch (15 cm) separation between a wall and the chassis air intake or a wall and the chassis air exhaust. You should also allow a minimum separation of 12 inches (30.5 cm) between the hot air exhaust on one chassis and the air intake on another chassis. Failure to maintain adequate air space can cause the chassis to overheat and the system to fail. On Catalyst chassis in which the airflow is from front to back, the chassis may be placed side-by-side. 1. RU = rack units Table 1-22 Catalyst 6513 Switch Specifications (continued) Item Specification
1-68 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Chapter 1 Product Overview Catalyst 6513-E Switch Figure 1-15 Catalyst 6513-E Switch INPUT OKFA N OKOUTPUT FAIL o INPUT OKFA N OKOUTPUT FA I L o 208620 Power supply 1Power supply 2 (redundant) 8 PORT GIGABIT ETHERNETWS-X64081LINKS TAT U S2 3 45 6 7 8LINKLINKLINKLINKLINKLINKLINK 24 PORT 100FXWS-X6224STATUS 24 PORT 100FXWS-X6224STATUS 24 PORT 100FXWS-X6224STATUS 24 PORT 100FXWS-X6224STATUS 1LINK2LINK3LINK4LINK5LINK6LINK7LINK8LINK9LINK10LINK11LINK12LINK13LINK14LINK15LINK16LINK17LINK18LINK19LINK20LINK21LINK22LINK23LINK24LINK1LINK2LINK3LINK4LINK5LINK6LINK7LINK8LINK9LINK10LINK11LINK12LINK13LINK14LINK15LINK16LINK17LINK18LINK19LINK20LINK21LINK22LINK23LINK24LINK1LINK2LINK3LINK4LINK5LINK6LINK7LINK8LINK9LINK10LINK11LINK12LINK13LINK14LINK15LINK16LINK17LINK18LINK19LINK20LINK21LINK22LINK23LINK24LINK1LINK2LINK3LINK4LINK5LINK6LINK7LINK8LINK9LINK10LINK11LINK12LINK13LINK14LINK15LINK16LINK17LINK18LINK19LINK20LINK21LINK22LINK23LINK24LINK 1 2 3 4 5 6 7 8 9 10 11 12 13 WS-SUP32-GE-3BS TAT U S SYSTEM ACTIVE PWR MGMT RESETCATALYST 6500 SUPERVISOR ENGINE 32CONSOLE EJECTDISK 0PORT 1 PORT 2 PORT 3 PORT 4PORT 5 PORT 6 PORT 7PORT 8PORT 9 USB 2.0LINK LINK LINK LINK LINK LINK LINK LINK LINKWS-SUP32-GE-3BS TAT U S SYSTEM ACTIVE PWR MGMT RESETCATALYST 6500 SUPERVISOR ENGINE 32CONSOLE EJ ECTDISK 0PORT 1 PORT 2 PORT 3 PORT 4PORT 5 PORT 6 PORT 7PORT 8PORT 9 USB 2.0LINK LINK LINK LINK LINK LINK LINK LINK LINK WS-C6513-E Switching modules Switching modules Fan assembly (accessible from rear of chassis) Supervisor engine Redundant supervisor engine