Cisco 6500e Manual
Have a look at the manual Cisco 6500e Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 53 Cisco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
A-13 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Transceivers, Module Connectors, and Cable Specifications Pluggable Transceivers X2 Transceivers Figure A-7 shows the X2 transceivers with the major features identified. Ta b l e A - 1 5 lists the cabling specifications for the X2 transceivers. Figure A-7 10-GB X2 Transceiver 1Transmit optical bore6Module connector 2Receive optical bore7Latch (extended) 3Latching sleeve (retracted)8Latching sleeve (extended) 4EMI gasket9Latch (retracted) 5Transceiver heat sink 5 6 120754 4 3 8 1 2 7 9 Latching sleeve retracted; latch extended Latching sleeve extended; latch retracted
A-14 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Transceivers, Module Connectors, and Cable Specifications Pluggable Transceivers NoteX2 transceivers support patch cords with either PC or UPC connectors. The X2 transceivers do not support patch cords with APC connectors. Table A-15 X2 Transceiver Cabling Specifications X2 Transceiver Product NumberConnector Ty p eWavelength (nm)Cable Type Core Size (microns)Modal Bandwidth (MHz/kmMaximum Cabling Distance1 1. Cable distances are based on fiber loss. Additional factors, such as the number of splices and the optical quality of the fiber, can affect cabling distances. X2-10GB-SR SC duplex 850 MMF 62.5 62.5 50.0 50.0 50.0160 200 400 500 200085.3 feet (26 m) 108.3 feet (33 m) 216.5 feet (66 m) 269 feet (82 m) 984.3 feet (300 m) X2-10GB-LR SC duplex 1310 SMF G.652 fiber — 6.21 miles (10 km) X2-10GB-ER SC duplex 1550 SMF G.652 fiber — 24.84 miles (40 km) X2-10GB-LX4 SC duplex 1310 MMF 62.5 50.0 50.0500 400 500984.3 feet (300 m) 787.4 feet (240 m) 984.3 feet (300 m) X2-10GB-CX4 InfiniBand 4X — InfiniBand (copper)— — 49.2 feet (15 m) 2 2. The Cisco X2-10GB-CX4 transceiver supports link lengths of up to 49.2 feet (15 m) on CX4 cable. Cisco offers four CX4 cables: CAB-INF-28G-1= (1 meter cable), CAB-INF-28G-5= (5 meter cable), CAB-INF-28G-10= (10 meter cable), and CAB-INF-26G-15= (15 meter cable). X2-10GB-LRM SC duplex 1310 MMF 62.5 50.0 50.0500 400 500721.8 feet (220 m) 328 feet (100 m) 721.8 feet (220 m) Table A-16 X2 Transceiver Optical Transmit and Receive Specifications X2 Transceiver Product NumberTransceiver Type Transmit Power (dBm) Receive Power (dBm)Transmit and Receive Wavelength (nm) X2-10GB-SR 10GBASE-SR, 850-nm MMF–1.2 (maximum) 1 –7.3 (minimum)–1.0 (maximum) –9.9 (minimum)840 to 860 X2-10GB-LR 10GBASE-LR, 1310-nm SMF0.5 (maximum) –8.2 (minimum)0.5 (maximum) –14.4 (minimum)1260 to 1355 X2-10GB-ER 10GBASE-ER, 1550-nm SMF4.0 (maximum) –4.7 (minimum)–1.0 (maximum) –15.8 (minimum)1530 to 1565
A-15 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Transceivers, Module Connectors, and Cable Specifications Pluggable Transceivers X2 transceivers are required for use on the WS-X6708-10GE and the WS-X6716-10GE 10-Gigabit Ethernet modules. Not all X2 transceiver types are supported unconditionally by these two modules; the following caveats apply: X2-10GB-CX4—10GBASE for CX4 (copper) cable. No restrictions for use. The Cisco X2-10GB-CX4 transceiver supports link lengths of up to 49.2 feet (15 m) on CX4 cable. Cisco offers four CX4 cables: CAB-INF-28G-1= (1 meter cable), CAB-INF-28G-5= (5 meter cable), CAB-INF-28G-10= (10 meter cable), and CAB-INF-26G-15= (15 meter cable). X2-10GB-ER—10GBASE-ER serial 1550-nm extended-reach, single-mode fiber (SMF), dispersion-shifted fiber (DSF). X2-10GB-ER transceivers labeled with a serial number that ends in -02 do not provide EMI compliance when they are installed in the WS-X6716-10GE module. (See Figure A-8 for the serial number location.) X2-10GB-LR—10GBASE-LR serial 1310-nm long-reach, single-mode fiber (SMF), dispersion-shifted fiber (DSF). X2-10GB-LR transceivers labeled with a serial number that ends in -02 do not provide EMI compliance when they are installed in the WS-X6716-10GE module. (See Figure A-8 for the serial number location.) X2-10GB-LRM—10GBASE-LRM for FDDI-grade multimode fiber (MMF). The X2-10GB-LRM is not supported by the show idprom command. X2-10GB-LX4—10GBASE-LX4 serial 1310-nm multimode fiber (MMF). X2-10GB-LX4 transceivers that are labeled with a serial number that ends with -01, -02, or -03 do not provide EMI compliance when they are installed in the WS-X6716-10GE. (See Figure A-8 for the serial number location.) X2-10GB-SR—10GBASE-SR serial 850-nm short-reach multimode fiber (MMF). No restrictions for use. X2-10GB-LX4 10GBASE-LX4 WWWDM 1300-nm MMF–0.5 per lane (maximum) –6.75 (minimum) per lane–0.5 (maximum) –14.4 per laneFour lanes; overall range: 1269 to 1356 X2-10GB-LRM 10GBASE-LRM 1310-nm0.5 (maximum) –6.5 (minimum)0.5 (maximum) –8.4 (minimum) (in average) –6.4 (minimum) in OMA) 2 1260 to 1355 1. The launch power shall be the lesser of the class 1 safety limit or the maximum receive power. Class 1 laser requirements are defined by IEC 60825-1: 2001. 2. Both the average and the OMA specifications must be met simultaneously. Table A-16 X2 Transceiver Optical Transmit and Receive Specifications (continued) X2 Transceiver Product NumberTransceiver Type Transmit Power (dBm) Receive Power (dBm)Transmit and Receive Wavelength (nm)
A-16 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Transceivers, Module Connectors, and Cable Specifications Pluggable Transceivers Figure A-8 X2 Transceiver Serial Number Label Locator Ta b l e A - 1 7 lists the physical and environmental specifications for the X2 transceiver. 159466 X2-10GB-XX V01 COM 10-XXXX-XX Class 1 Laser 21 CFR 1040.10 LN#50 07/2001 Made In COUNTRY SN: LLLYYWWSSSS XXXXXXXXXX X2 -10G B-X X V0 1 CO M 1 0-XXXX- X X C lass 1 La se r 21 C FR 1040.10 LN #50 0 7 /2001 M ade In C OUNT RY SN: LLLYYWW SSSS XXXXXXXXXX Cisco part number Table A-17 10-GB X2 Transceiver Physical and Environmental Specifications Item Specification Dimensions (H x W x D) 0.53 x 1.41 x 3.58 inches (13.46 x 36 x 91 mm) Operating temperature Storage temperature32° to 122°F (0° to 50°C) –40° to 185°F (–40° to 85°C)
A-17 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Transceivers, Module Connectors, and Cable Specifications Pluggable Transceivers WDM Transceivers The WDM transceiver modules are listed in Ta b l e A - 1 8 along with brief descriptions of the transceiver modules and illustration references. Ta b l e A - 1 8 W D M Tr a n s c e i v e r s WDM Transceiver Ty p eDescription Supported on these Modules1WDM Transceiver IllustrationWDM Transceiver Specification Ta b l e CWDM GBIC The CWDM GBIC transceivers provide 1000BASE-X full-duplex connectivity between the GBIC-compatible modules, supervisor engines, and the network. A set of eight CWDM GBICs are available for use with the CWDM Passive Optical System. The CWDM GBIC transceivers have a duplex SC connector. WS-X6408A-GBIC WS-X6416-GBIC WS-X6516-GBIC WS-X6516A-GBIC WS-X6816-GBICFigure A-9 Table A-19 DWDM GBIC DWDM GBIC transceivers are used as part of a DWDM optical network to provide high-capacity bandwidth across an optical fiber network. There are 32 fixed-wavelength DWDM GBICs that support the International Telecommunications Union (ITU) 100 GHz wavelength grid. The DWDM GBIC transceivers have a duplex SC connector. WS-X6408A-GBIC WS-X6416-GBIC WS-X6516-GBIC WS-X6516A-GBIC WS-X6816-GBICFigure A-10 Table A-20 R/O WDM GBIC The R/O WDM GBIC receiver (WDM-GBIC-REC) operates as a pluggable receiver on any unidirectional link in a CWDM or DWDM transport network; there is no transmitter in the GBIC. The receiver can be used for all wavelengths supported by Cisco CWDM and DWDM transceivers and can be used interchangeably with 1000BASE-SX, 1000BASE-LX/LH, and 1000BASE-ZX transceivers on a port-by-port basis. The W/O WDM receiver has a single SC connector. WS-X6408A-GBIC WS-X6416-GBIC WS-X6516-GBIC WS-X6516A-GBIC WS-X6816-GBIC——
A-18 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Transceivers, Module Connectors, and Cable Specifications Pluggable Transceivers CWDM SFP The Coarse Wavelength Division Multiplexing (CWDM) SFPs are hot-swappable, transceiver components that you plug into SFP-compatible modules and supervisor engines. The CWDM SFP transceiver uses an LC optical connector to connect to single-mode fiber-optic (SMF) cable. You can connect the CWDM SFPs to CWDM passive optical system optical add/drop multiplexer (OADM) modules or multiplexer/demultiplexer plug-in modules using single-mode fiber-optic cables. WS-X6724-SFP WS-X6748-SFPFigure A-11 Table A-21 DWDM XENPAK DWDM XENPAK transceivers are used as part of a DWDM optical network to provide high-capacity bandwidth across an optical fiber network. There are 32 fixed-wavelength DWDM XENPAK transceivers that support the International Telecommunications Union (ITU) 100 GHz wavelength grid. The DWDM XENPAK transceivers have a duplex SC connector. WS-X6704-10GEFigure A-12 Table A-22 R/O WDM XENPAKThe R/O WDM XENPAK receiver (WDM-XENPAK-REC) operates as a pluggable receiver on any unidirectional link in a CWDM or DWDM transport network; there is no transmitter in the XENPAK. The receiver can be used for all wavelengths supported by Cisco DWDM XENPAK transceivers. The W/O WDM receiver has a single SC connector. WS-X6704-10GE — — 1. Not all WDM transceivers may be supported on the modules. Refer to your software release notes for specific information on which WDM transceivers are supported and the software release level necessary to support them. Table A-18 WDM Transceivers (continued) WDM Transceiver Ty p eDescription Supported on these Modules1WDM Transceiver IllustrationWDM Transceiver Specification Ta b l e
A-19 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Transceivers, Module Connectors, and Cable Specifications Pluggable Transceivers Figure A-9 CWDM GBIC Transceiver Figure A-10 DWDM GBIC Transceiver Module 1Color arrow on label5Optical bore dust plug 2Alignment groove6Receive optical bore 3Spring clip7Color dot 4Transmit optical bore Table A-19 CWDM GBIC Transceivers Wavelengths Model Number Color Code CWDM GBIC Wavelength CWDM-GBIC-1470= Gray 1470 nm laser single-mode CWDM-GBIC-1490= Violet 1490 nm laser single-mode CWDM-GBIC-1510= Blue 1510 nm laser single-mode CWDM-GBIC-1530= Green 1530 nm laser single-mode CWDM-GBIC-1550= Yellow 1550 nm laser single-mode CWDM-GBIC-1570= Orange 1570 nm laser single-mode CWDM-GBIC-1590= Red 1590 nm laser single-mode CWDM-GBIC-1610= Brown 1610 nm laser single-mode SINGLE-MODE1000BASE-CWDM GBIC CWDM-GBIC-1550=2 5 6 17 3484472 36494 Receiver Transmitter
A-20 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Transceivers, Module Connectors, and Cable Specifications Pluggable Transceivers Table A-20 DWDM GBIC Transceiver Product Numbers and ITU Channel Numbers DWDM GBIC Product NumberDescription ITU Channel DWDM-GBIC-60.61 1000BASE-DWDM 1560.61 nm GBIC 21 DWDM-GBIC-59.79 1000BASE-DWDM 1559.79 nm GBIC 22 DWDM-GBIC-58.98 1000BASE-DWDM 1558.98 nm GBIC 23 DWDM-GBIC-58.17 1000BASE-DWDM 1558.17 nm GBIC 24 DWDM-GBIC-56.55 1000BASE-DWDM 1556.55 nm GBIC 26 DWDM-GBIC-55.75 1000BASE-DWDM 1555.75 nm GBIC 27 DWDM-GBIC-54.94 1000BASE-DWDM 1554.94 nm GBIC 28 DWDM-GBIC-54.13 1000BASE-DWDM 1554.13 nm GBIC 29 DWDM-GBIC-52.52 1000BASE-DWDM 1552.52 nm GBIC 31 DWDM-GBIC-51.72 1000BASE-DWDM 1551.72 nm GBIC 32 DWDM-GBIC-50.92 1000BASE-DWDM 1550.92 nm GBIC 33 DWDM-GBIC-50.12 1000BASE-DWDM 1550.12 nm GBIC 34 DWDM-GBIC-48.51 1000BASE-DWDM 1548.51 nm GBIC 36 DWDM-GBIC-47.72 1000BASE-DWDM 1547.72 nm GBIC 37 DWDM-GBIC-46.92 1000BASE-DWDM 1546.92 nm GBIC 38 DWDM-GBIC-46.12 1000BASE-DWDM 1546.12 nm GBIC 39 DWDM-GBIC-44.53 1000BASE-DWDM 1544.53 nm GBIC 41 DWDM-GBIC-43.73 1000BASE-DWDM 1543.73 nm GBIC 42 DWDM-GBIC-42.94 1000BASE-DWDM 1542.94 nm GBIC 43 DWDM-GBIC-42.14 1000BASE-DWDM 1542.14 nm GBIC 44 DWDM-GBIC-40.56 1000BASE-DWDM 1540.56 nm GBIC 46 DWDM-GBIC-39.77 1000BASE-DWDM 1539.77 nm GBIC 47 DWDM-GBIC-39.98 1000BASE-DWDM 1539.98 nm GBIC 48 DWDM-GBIC-38.19 1000BASE-DWDM 1538.19 nm GBIC 49 DWDM-GBIC-36.61 1000BASE-DWDM 1536.61 nm GBIC 51 DWDM-GBIC-35.82 1000BASE-DWDM 1535.82 nm GBIC 52 DWDM-GBIC-35.04 1000BASE-DWDM 1535.04 nm GBIC 53 DWDM-GBIC-34.25 1000BASE-DWDM 1534.25 nm GBIC 54 DWDM-GBIC-32.68 1000BASE-DWDM 1532.68 nm GBIC 56 DWDM-GBIC-31.90 1000BASE-DWDM 1531.90 nm GBIC 57 DWDM-GBIC-31.12 1000BASE-DWDM 1531.12 nm GBIC 58 DWDM-GBIC-30.33 1000BASE-DWDM 1530.33 nm GBIC 59
A-21 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Transceivers, Module Connectors, and Cable Specifications Pluggable Transceivers Figure A-11 CWDM SFP Transceiver Table A-21 CWDM SFP Transceivers Model Number Color Code CWDM GBIC Wavelength CWDM-SFP-1470= Gray 1470 nm laser, single-mode CWDM-SFP-1490= Violet 1490 nm laser, single-mode CWDM-SFP-1510= Blue 1510 nm laser, single-mode CWDM-SFP-1530= Green 1530 nm laser, single-mode CWDM-SFP-1550= Yellow 1550 nm laser, single-mode CWDM-SFP-1570= Orange 1570 nm laser, single-mode CWDM-SFP-1590= Red 1590 nm laser, single-mode CWDM-SFP-1610= Brown 1610 nm laser, single-mode Table A-22 DWDM XENPAK Transceiver Module Product Numbers and ITU Channel Numbers DWDM XENPAK Product NumberDescription ITU Channel DWDM-XENPAK-60.61 1000BASE-DWDM 1560.61 nm XENPAK21 DWDM-XENPAK-59.79 1000BASE-DWDM 1559.79 nm XENPAK22 DWDM-XENPAK-58.98 1000BASE-DWDM 1558.98 nm XENPAK23 DWDM-XENPAK-58.17 1000BASE-DWDM 1558.17 nm XENPAK24 DWDM-XENPAK-56.55 1000BASE-DWDM 1556.55 nm XENPAK26 DWDM-XENPAK-55.75 1000BASE-DWDM 1555.75 nm XENPAK27 DWDM-XENPAK-54.94 1000BASE-DWDM 1554.94 nm XENPAK28 113753 CWDM -SFP-1470-2GClass 1 21CFR1040.10 LN#50 7/01 03-13 S/N: OH1233456 Color arrow on label Receive optical bore Transmit optical bore Bail clasp Dustplug
A-22 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Transceivers, Module Connectors, and Cable Specifications Pluggable Transceivers DWDM-XENPAK-54.13 1000BASE-DWDM 1554.13 nm XENPAK29 DWDM-XENPAK-52.52 1000BASE-DWDM 1552.52 nm XENPAK31 DWDM-XENPAK-51.72 1000BASE-DWDM 1551.72 nm XENPAK32 DWDM-XENPAK-50.92 1000BASE-DWDM 1550.92 nm XENPAK33 DWDM-XENPAK-50.12 1000BASE-DWDM 1550.12 nm XENPAK34 DWDM-XENPAK-48.51 1000BASE-DWDM 1548.51 nm XENPAK36 DWDM-XENPAK-47.72 1000BASE-DWDM 1547.72 nm XENPAK37 DWDM-XENPAK-46.92 1000BASE-DWDM 1546.92 nm XENPAK38 DWDM-XENPAK-46.12 1000BASE-DWDM 1546.12 nm XENPAK39 DWDM-XENPAK-44.53 1000BASE-DWDM 1544.53 nm XENPAK41 DWDM-XENPAK-43.73 1000BASE-DWDM 1543.73 nm XENPAK42 DWDM-XENPAK-42.94 1000BASE-DWDM 1542.94 nm XENPAK43 DWDM-XENPAK-42.14 1000BASE-DWDM 1542.14 nm XENPAK44 DWDM-XENPAK-40.56 1000BASE-DWDM 1540.56 nm XENPAK46 DWDM-XENPAK-39.77 1000BASE-DWDM 1539.77 nm XENPAK47 DWDM-XENPAK-39.98 1000BASE-DWDM 1539.98 nm XENPAK48 DWDM-XENPAK-38.19 1000BASE-DWDM 1538.19 nm XENPAK49 DWDM-XENPAK-36.61 1000BASE-DWDM 1536.61 nm XENPAK51 DWDM-XENPAK-35.82 1000BASE-DWDM 1535.82 nm XENPAK52 DWDM-XENPAK-35.04 1000BASE-DWDM 1535.04 nm XENPAK53 Table A-22 DWDM XENPAK Transceiver Module Product Numbers and ITU Channel Numbers (continued) DWDM XENPAK Product NumberDescription ITU Channel