Cisco 6500e Manual
Have a look at the manual Cisco 6500e Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 53 Cisco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
A-1 Catalyst 6500 Series Switches Installation Guide OL-5781-08 APPENDIXA Power Supply Specifications Revised: September 21, 2015 This appendix describes the Catalyst 6500 series power supplies and provides their specifications. This appendix contains the following sections: Power Supply Compatibility Matrix, page A-2 950 W AC-Input and DC-Input Power Supplies, page A-5 1000 W AC-Input Power Supply, page A-10 1300 W AC-Input and DC-Input Power Supplies, page A-13 1400 W AC-Input Power Supply, page A-18 2500 W AC-Input and DC-Input Power Supplies, page A-23 2700 W AC-Input and DC-Input Power Supplies, page A-29 3000 W AC-Input Power Supply, page A-36 4000 W AC-Input and DC-Input Power Supplies, page A-41 6000 W AC-Input and DC-Input Power Supplies, page A-46 8700 W AC-Input Power Supply, page A-54 AC Power Cord Illustrations, page A-63 Power Supply Redundancy, page A-73 Ta b l e A - 1 lists the currently available Catalyst 6500 series switch power supplies and the power supply description location. Table A-1 Catalyst 6500 Series Power Supplies Power Supply RatingAC-Input Model Product NumberDC-Input Model Product Number 950 W 1PWR-950-AC PWR-950-DC 1000 W WS-CAC-1000W Not Available 1300 W WS-CAC-1300W WS-CDC-1300W 1400 W 1PWR-1400-AC Not Available 2500 W WS-CAC-2500W WS-CDC-2500W 2700 W 2PWR-2700-AC/4 PWR-2700-DC/4
A-2 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Power Supply Specifications Power Supply Compatibility Matrix NoteThe Catalyst 6500 series switches allow you to mix AC-input and DC-input power supplies in the same chassis. NoteMany telco organizations require a –48 VDC power supply to accommodate their power distribution systems. From an operational perspective, the DC-input power supply has the same characteristics as the AC-input version. Power Supply Compatibility Matrix Ta b l e A - 2 lists the compatibility of the power supplies with the Catalyst 6500 switch chassis. 3000 W WS-CAC-3000W Not Available 4000 W WS-CAC-4000W-US1 WS-CAC-4000W-INTPWR-4000-DC 6000 W WS-CAC-6000W PWR-6000-DC 8700 W WS-CAC-8700W-E Not Available 1. For use with the Catalyst 6503 and Catalyst 6503-E switches only. 2. For use with the Catalyst 6504-E switch only. Table A-1 Catalyst 6500 Series Power Supplies (continued) Power Supply RatingAC-Input Model Product NumberDC-Input Model Product Number Table A-2 Catalyst 6500 Series Switch Supported Power Supply Configurations Platform Supported Power Supplies Chassis/Power Supply Restrictions Catalyst 6503 950 W AC-input and DC-input 1400 W AC-input The 950 W AC-input power supply requires a PEM-15A-AC Power Entry Module (PEM). The 1400 W AC-input power supply requires a PEM-20A-AC+ Power Entry Module (PEM). Catalyst 6503-E 950 W AC-input and DC-input 1400 W AC-input The 950 W AC-input power supply requires a PEM-15A-AC Power Entry Module (PEM). The 1400 W AC-input power supply requires a PEM-20A-AC+ Power Entry Module (PEM). Catalyst 6504-E 2700 W AC-input and DC-input No restrictions
A-3 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Power Supply Specifications Power Supply Compatibility Matrix Catalyst 65061000 W AC-input 1300 W AC-input and DC-input 2500 W AC-input and DC-input 3000 W AC-input 4000 W AC-input and DC-input 6000 W AC-input and DC-input 8700 W AC-inputThe 6000 W AC-input, 6000 W DC-input, and the 8700 W AC-input power supplies are limited to 4000 W when they are installed in the Catalyst 6506 switch chassis. Catalyst 6506-E 2500 W AC-input and DC-input 3000 W AC-input 4000 W AC-input and DC-input 6000 W AC-input and DC-input 8700 W AC-inputNo restrictions. Catalyst 6509 1000 W AC-input 1300 W AC-input, and DC-input 2500 W AC-input and DC-input 3000 W AC-input 4000 W AC-input and DC-input 6000 W AC-input and DC-input 8700 W AC-inputThe 6000 W AC-input, 6000 W DC-input, and the 8700 W AC-input power supplies are limited to 4000 W when they are installed in the Catalyst 6509 switch chassis. Catalyst 6509-E 2500 W AC-input and DC-input 3000 W AC-input 4000 W AC-input and DC-input 6000 W AC-input and DC-input 8700 W AC-inputNo restrictions. Catalyst 6509-NEB 1000 W AC-input 1300 W AC-input and DC-input 2500 W AC-input and DC-input 3000 W AC-input 4000 W AC-input and DC-input 6000 W AC-input and DC-input 8700 W AC-inputThe 6000 W AC-input, 6000 W DC-input, and the 8700 W AC-input power supplies are limited to 4000 W when they are installed in the Catalyst 6509-NEB switch chassis. Table A-2 Catalyst 6500 Series Switch Supported Power Supply Configurations (continued) Platform Supported Power Supplies Chassis/Power Supply Restrictions
A-4 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Power Supply Specifications Power Supply Compatibility Matrix Catalyst 6509-NEB-A2500 W AC-input and DC-input 3000 W AC-input 4000 W AC-input and DC-input 6000 W AC-input and DC-input 8700 W AC-inputThe 6000 W AC-input, 6000 W DC-input, and the 8700 W AC-input power supplies are limited to 4500 W maximum output when they are installed in the Catalyst 6509-NEB-A switch chassis. Catalyst 6509-V-E 2500 W AC-input and DC-input 3000 W AC-input 4000 W AC-input and DC-input 6000 W AC-input and DC-input 8700 W AC-inputNo restrictions. Catalyst 6513 2500 W AC-input and DC-input 3000 W AC-input 4000 W AC-input and DC-input 6000 W AC-input and DC-input 8700 W AC-inputThe 8700 W AC-input power supply is limited to 6000 W maximum output when it is installed in the Catalyst 6513 switch chassis. Catalyst 6513-E 2500 W DC-input 3000 W AC-input 4000 W AC-input and DC-input 6000 W AC-input and DC-input 8700 W AC-inputNo restrictions. Table A-2 Catalyst 6500 Series Switch Supported Power Supply Configurations (continued) Platform Supported Power Supplies Chassis/Power Supply Restrictions
A-5 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Power Supply Specifications 950 W AC-Input and DC-Input Power Supplies 950 W AC-Input and DC-Input Power Supplies The 950 W AC-input (PWR-950-AC) and DC-input (PWR-950-DC) power supplies can be installed in the Catalyst 6503 and Catalyst 6503-E switch chassis only. Due to form factor differences, the 950 W AC-input and DC-input power supplies cannot be installed in any other Catalyst 6500 series switch chassis. The 950 W power supplies (see Figure A-1) do not connect directly to source AC or source DC but use Power Entry Modules (PEMs), located on the front of the Catalyst 6503 and Catalyst 6503-E switch chassis, to connect the site power source to the power supply located in the back of the chassis. The form factor is the same for the AC-input and DC-input power supplies. The AC-input PEM (shown in Figure A-2) and DC-input PEM (shown in Figure A-3) provide an input power connection on the front of the switch chassis to connect the site power source to the power supply. You can connect the DC-input power supply to the power source with heavy gauge wiring connected to a terminal block. The actual wire gauge size is determined by local electrical codes and restrictions. NoteThe system (NEBS) ground serves as the primary safety ground for Catalyst 6503 and Catalyst 6503-E chassis that are equipped with 950 W DC-input power supplies and DC-input PEMs. The DC-input power supplies for these chassis do not have a separate ground. The PEMs have an illuminated power switch (AC-input model only), current protection, surge and EMI suppression, and filtering functions. Figure A-1 950 W AC- and DC-Input Power Supplies Figure A-2 950 W AC-Input PEM (PEM-15A-AC) 63183 IN PU T O KFA N O KO U TPUT FAIL Captive installation screws Status LEDs 130058Captive installation screwsIEC 60320 C15 connector AC power switch
A-6 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Power Supply Specifications 950 W AC-Input and DC-Input Power Supplies Figure A-3 DC Power Entry Module (PEM) 950 W Power Supply Specifications Ta b l e A - 3 lists the specifications for the 950 W AC-input power supply. Captive installation screws Catalyst 6503 DC PEM 79980 Table A-3 950 W AC-Input Power Supply Specifications Specification Description AC-input type Autoranging input with power factor correction (PFC) NotePower factor correction is a standard feature on all Catalyst 6500 series AC-input power supplies. PFC reduces the reactive component in the source AC current allowing higher power factors (typically 99 percent or better) and lower harmonic current components. AC-input voltage Low-line (120 VAC nominal)—90 VAC (min) to 132 VAC (max) High-line (230 VAC nominal)—170 VAC (min) to 264 VAC (max) AC-input current 12 A @ 120 VAC 6A @ 230VAC AC-input frequency 50/60 Hz (nominal)
A-7 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Power Supply Specifications 950 W AC-Input and DC-Input Power Supplies Branch circuit requirement Each chassis power supply should have its own dedicated, fused-branch circuit: For North America—15 A For International—Circuits sized to local and national codes All Catalyst 6500 series AC-input power supplies require single-phase source AC. All AC power supply inputs are fully isolated. –Source AC can be out of phase between multiple power supplies in the same chassis, which means that PS1 can be operating from phase A and PS2 can be operating from phase B. –For high-line operation, the power supply operates with the hot conductor wired to a source AC phase and the neutral conductor wired either to ground or to another source AC phase as long as the net input voltage is in the range of 170 to 264 VAC. –Source AC can be out of phase between AC inputs on power supplies that are equipped with multiple AC inputs, which means that power cord 1 can be plugged into phase A and power cord 2 can be plugged into phase B. Power supply output capacity950 W maximum (100–240 VAC) Power supply output 15 A @ +1.5 VDC 2.5 A @ +3.3 VDC 19.15 A @ +50 VDC Output holdup time 20 ms minimum kVA rating 11.32 kVA Heat dissipation 4441 BTU/hour (approx.) Weight 8.2 lb (3.7 kg) 1. The kVA rating listed for the power supply should be used as the sizing criteria for both UPS outputs as well as standard circuits and transformers to power a switch. Table A-3 950 W AC-Input Power Supply Specifications (continued) Specification Description
A-8 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Power Supply Specifications 950 W AC-Input and DC-Input Power Supplies Ta b l e A - 4 lists the specifications for the 950 W DC-input power supply. Ta b l e A - 5 lists the power supply LEDs and their meanings. Table A-4 950 W DC-Input Power Supply Specifications Specification Description DC-input voltage –48 VDC to –60 VDC continuous DC-input current 28 A @ –48 VDC 23 A @ –60 VDC Power supply output capacity950 W Power supply output 15 A @ +1.5 VDC 2.5 A @ +3.3 VDC 19.15 A @ +50 VDC Output holdup time 8 ms Heat dissipation 4632 BTU/hour (approx.) Weight 8.4 lb (3.8 kg) Table A-5 950 W AC-Input and DC-Input Power Supply LEDs LED Meaning INPUT OK AC-input power supplies: Green—Source AC voltage is OK. (Input voltage is 85 VAC or greater.) Off—Source AC voltage falls below 70 VAC, is not present, or the PEM is turned off. DC-input power supplies: Green—Source DC voltage is OK. (–40.5 VDC or greater.) Off—Source DC voltage falls below –33 VDC or is not present at the PEM. FAN OK Green—Power supply fan is operating properly. Off—Power supply fan failure is detected. OUTPUT FAIL Red—Problem with one or more of the DC-output voltages of the power supply is detected. Off—DC-output voltages within acceptable margins. NoteFor proper operation of the OUTPUT FAIL LED, systems with single power supplies must be configured with a minimum of one fan tray and one supervisor engine. Systems with dual power supplies must have a minimum configuration of one fan tray, one supervisor engine, and one additional module. Failure to meet these minimum configuration requirements can cause a false power supply output fail signal.
A-9 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Power Supply Specifications 950 W AC-Input and DC-Input Power Supplies 950 W Power Supply AC Power Cords Ta b l e A - 6 lists the 950 W AC-input power supply AC power cords specifications. These power cords plug into the 950 W PEM(PEM-15A-AC), not directly into the power supply. The table includes references to power cord illustrations. NoteAll 950 W power supply power cords are 8 feet 2 inches (2.5 meters) in length. NoteAll 950 W power supply power cords have an IEC60320/C15 appliance connector at one end. The appliance connector has a 90° left bend. Table A-6 950 W AC-Input Power Supply Power Cords Locale Power Cord Part NumberAC Source Plug Type Cordset Rating Power Cord Reference Illustration Argentina CAB-7KACR= IRAM 2073 10 A, 250 VACFigure A-25 Australia, New Zealand CAB-AC10A-90L-AU= SAA AS 3112 10 A, 250 VAC Figure A-20 Continental Europe CAB-AC10A-90L-EU= CEE 7/7 10 A, 250 VACFigure A-21 Italy CAB-AC10A-90L-IT= CEI 23-16/7 10 A, 250 VACFigure A-22 Japan, North America CAB-AC15A-90L-US= NEMA 5-15 15 A, 125 VACFigure A-23 United Kingdom CAB-AC10A-90L-UK= BS 1363 1 1. Plug contains a 13 A fuse. 10 A, 250 VACFigure A-24
A-10 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Power Supply Specifications 1000 W AC-Input Power Supply 1000 W AC-Input Power Supply The 1000 W AC-input power supply (WS-CAC-1000W) is supported in the following Catalyst 6500 series switches: Catalyst 6506 Catalyst 6509 Catalyst 6509-NEB The 1000 W power supply (shown in Figure A-4) shares the same form factor as the 1300 W, 2500 W, 3000 W, 4000 W, and 6000 W AC-input power supplies. Figure A-4 1000 W AC-Input Power Supply Power switchCable retention deviceAC power connectionINPUT OKFA N OKOUTPUT FAIL Captive installation screwStatus LEDs 16029I 0