Cisco 6500e Manual
Have a look at the manual Cisco 6500e Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 53 Cisco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
A-3 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Transceivers, Module Connectors, and Cable Specifications Pluggable Transceivers Ta b l e A - 2 lists the fiber loss budgets for the 100-MB SFP transceivers. Ta b l e A - 3 lists the physical and environmental specifications for the 100-MB SFP transceivers. 1-GB Transceivers The 1-GB transceivers include the Gigabit Interface Converter (GBIC) transceiver and the SFP transceiver. The GBIC transceivers and SFP transceivers differ in both form-factor and in connector type; they are not interchangeable. Ta b l e A - 4 lists both 1-GB transceiver types, the modules that support them, the applicable transceiver illustrations, and the applicable specification tables. Table A-2 Fiber Loss Budgets for the 100-MB SFP Transceivers 100-MB SFP Transceiver Product NumberTransmit (dBm) Receive (dBm) GLC-FE-100FX –14 (maximum) –20 (minimum)–14 (maximum) –31 (minimum) GLC-FE-100LX –8 (maximum) –15 (minimum)–8 (maximum) –28 (minimum) GLC-FE-100BX-U –8 (maximum) –14 (minimum)–7 (maximum) –28.2 (minimum) GLC-FE-100BX-D –8 (maximum) –14 (minimum)–7 (maximum) –28.2 (minimum) GLC-FE-100EX 0 (maximum) –5 (minimum)–8 (maximum) –28 (minimum) GLC-FE-100ZX 2 (maximum) –3 (minimum)–8 (maximum) –30 (minimum) Table A-3 100-MB SFP Transceiver Physical and Environmental Specifications Item Specification Dimensions (H x W x D) 0.04 x 0.53 x 2.22 in. (8.5 x 13.4 x 56.5 mm) Operating temperature Storage temperature32° to 122°F (0° to 50°C) –40° to 185°F (–40° to 85°C)
A-4 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Transceivers, Module Connectors, and Cable Specifications Pluggable Transceivers 1-GB GBIC Transceivers Figure A-2 shows a 1000BASE-T (copper) GBIC transceiver. Figure A-3 shows a 1000BASE-X (optical) GBIC transceiver. Ta b l e A - 5 lists the cabling specifications for the GBIC transceivers. Figure A-2 1000BASE-T GBIC Transceiver (WS-G5483) Ta b l e A - 4 1 - G B Tr a n s c e i v e r Ty p e s 1-GB Transceiver Ty p eSupported on these Modules1 1. Not all GBIC transceiver types or SFP transceiver types may be supported on your module. Refer to your software release notes to determine if a specific GBIC transceiver or SFP transceiver is supported on your module. Transceiver IllustrationTr a n s c e i v e r Specification Table GBIC WS-X6408A-GBIC WS-X6416-GBIC WS-X6516-GBIC WS-X6516A-GBIC WS-X6816-GBICFigure A-2 (1000BASE-T copper GBIC) Figure A-3 (1000BASE-X optical GBIC)Ta b l e A - 5 (cabling specifications) Ta b l e A - 6 (fiber loss budgets) Ta b l e A - 7 (environmental specifications) SFP WS-X6724-SFP WS-X6748-SFP WS-SUP32-GE-3B WS-SUP32P-GE WS-SUP720 WS-SUP720-3B WS-SUP720-3BXLFigure A-4 (1000BASE-T copper SFP) Figure A-5 (1000BASE-X optical SFP)Ta b l e A - 8 (cabling specifications) Ta b l e A - 9 (fiber loss budgets) Ta b l e A - 1 0 (environmental specifications) RJ-45 connectorPlastic tab 49959
A-5 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Transceivers, Module Connectors, and Cable Specifications Pluggable Transceivers Figure A-3 1000BASE-X GBIC Transceiver Modules (WS-G5484, WS-G5486, and WS-G5487) Table A-5 GBIC Transceiver Module Cabling Specifications GBIC Transceiver Model and Product NumberInterface ConnectorNominal Wavelength (nm)Network Cable TypeFiber Core Size1 (micron) 1. The numbers given for multimode fiber-optic (MMF) cable refer to the core diameter. Modal Bandwidth (MHz km)Cable Distance2 2. Cable distances are based on fiber loss. Additional factors, such as the number of splices and the optical quality of the fiber, can affect cabling distances. 1000BASE-T (WS-G5483)RJ-45 — — — 328 ft (100 m) 1000BASE-SX 3 (WS-G5484) 3. Use with MMF only. SC duplex 850 MMF 62.5 62.5 50.0 50.0160 200 400 500722 ft (220 m) 902 ft (275 m) 1640 ft (500 m) 1804 ft (550 m) 1000BASE-LX/LH (WS-G5486)SC duplex 1310 MMF 4 SMF 4. Refer to the product bulletin for the usage of mode conditioning patch cords in 1000BASE and 10GBASE Ethernet laser-based transmissions at this URL: http://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_bulletin_c25-530836.html 62.5 50.0 50.0 G.652 5 5. ITU-T G.652 SMF as specified by the IEEE 802.3z standard. 500 400 500 —1804 ft (550 m) 1804 ft (550 m) 1804 ft (550 m) 6.2 mi (10 km) 1000BASE-ZX 6 (WS-G5487) 6. Use with SMF only. SC duplex 1550 SMF SMF 7 7. Dispersion-shifted single-mode fiber-optic cable. G.6525 G.6525 — —43.5 mi (70 km)8 62.1 mi (100 km) 8. The minimum link distance for ZX GBICs is 6.2 miles (10 km), when an 8-dB attenuator is installed at each end of the link. Without attenuators, the minimum link distance is 24.9 miles (40 km). 36494 Receiver Transmitter
A-6 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Transceivers, Module Connectors, and Cable Specifications Pluggable Transceivers Ta b l e A - 6 lists the fiber loss budgets for the GBIC transceivers. Ta b l e A - 7 lists the physical and environmental specifications for the GBIC transceivers. Table A-6 Fiber Loss Budgets for the 1-GB GBIC Transceivers 1-GB GBIC Transceiver Product NumberTransmit (dBm) Receive (dBm) WS-G5484 (1000BASE-SX)–3 (maximum) –9.5 (minimum)0 (maximum) –17 (minimum) WS-G5486 (1000BASE-LX/LH)–3 (maximum) –9.5 (minimum)–3 (maximum) –19 (minimum) WS-G5487 (1000BASE-ZX)5 (maximum) 0 (minimum)–3 (maximum) –23 (minimum) 1 1. The 1000BASE-ZX GBIC transceiver provides a minimum optical power budget of 23 dB. To determine the supported link distance, you need to measure your cable plant with an optical loss test set to verify that the optical loss of the cable plant (including connectors and splices) is less than or equal to this value. The optical measurement must be performed with a 1550 nanometer light source. Table A-7 1-GB GBIC Transceiver Physical and Environmental Specifications Item Specification Dimensions (H x W x D) 0.75 x 1.54 x 3.50 inches (19.0 x 39.1 x 88.9 mm) Operating temperature Storage temperature32° to 122°F (0° to 50°C) –40° to 185°F (–40° to 85°C)
A-7 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Transceivers, Module Connectors, and Cable Specifications Pluggable Transceivers 1-GB SFP Transceivers Figure A-4 shows a 1000BASE-T (copper) SFP transceiver. Figure A-5 shows a 1000BASE-X (optical) SFP transceiver. Ta b l e A - 8 lists the cabling specifications for the SFP transceivers. Figure A-4 1000BASE-T SFP Transceiver (GLC-T) Figure A-5 1000BASE-X SFP Transceivers 1RJ-45 connector3Bale-clasp shown in the open (unlocked) position 2Bale-clasp shown in the closed (locked) position 273166 1 2 3 130927 GLC-SX-MMClass 1 21CFR1040.10 LN#50 7/01 03-13 S/N: OH1233456 Receive optical bore Transmit optical bore Bail clasp Dust plug
A-8 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Transceivers, Module Connectors, and Cable Specifications Pluggable Transceivers Ta b l e A - 8 S F P Tr a n s c e i v e r Cabling Specifications SFP Transceiver Module and Product NumberInterface ConnectorNominal Wavelength (nm)Network Cable TypeFiber Core Size (micron)Modal Bandwidth (MHz/km)Cable Distance1 1. Cable distances are based on fiber loss. Additional factors, such as the number of splices and the optical quality of the fiber, can affect cabling distances. 1000BASE-T (GLC-T=)RJ-45 — Category 5, 5e, or 6 UTP/FTP—— 328ft (100m) 1000BASE-SX (GLC-SX-MM=)LC duplex 850 MMF 62.5 62.5 50.0 50.0160 200 400 500722 ft (220 m) 902 ft (275 m) 1640 ft (500 m) 1804 ft (550 m) 1000BASE-LX/LH (GLC-LH-SM=)LC duplex 1300 MMF 2 SMF 2. Refer to the product bulletin for the usage of mode conditioning patch cords in 1000BASE and 10GBASE Ethernet laser-based transmissions at this URL: http://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_bulletin_c25-530836.html 62.5 50.0 50.0 G.652 3 3. ITU-T G.652 SMF as specified by the IEEE 802.3z standard. 500 400 500 —1804 ft (550 m) 1804 ft (550 m) 1804 ft (550 m) 6.21 mi (10 km) 1000BASE-ZX (GLC-ZX-SM=)LC duplex 1550 SMF G.652 3— 43.4 to 62 mi (70 to 100 km)4 4. 1000BASE-ZX SFP modules can reach up to 62 miles (100 km) by using dispersion-shifted SMF or low-attenuation SMF; the actual distance depends on the fiber quality, the number of splices, and the connectors. 1000BASE-BX-D (GLC-BX-D=)LC single 1310 SMF G.6523— 6.21 mi (10 km) 1000BASE-BX-U (GLC-BX-U=)LC single 1490 SMF G.652 3— 6.21 mi (10 km)
A-9 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Transceivers, Module Connectors, and Cable Specifications Pluggable Transceivers Ta b l e A - 9 lists the fiber loss budgets for the 1-GB SFP transceivers. Ta b l e A - 1 0 lists the physical and environmental specifications for the 1-GB SFP transceivers. NoteYou can use any combination of SFP modules that your Cisco device supports. The only restrictions are that each SFP port must match the wavelength specifications on the other end of the cable and that the cable must not exceed the stipulated cable length for reliable communications. Table A-9 Fiber Loss Budgets for the 1-GB SFP Transceivers 1-GB SFP Transceiver Product NumberTransmit (dBm) Receive (dBm) GLC-SX-MM (1000BASE-SX)–4 (maximum) –9.5 (minimum)0 (maximum) –17 (minimum) GLC-LH-SM (1000BASE-LX/LH)–3 (maximum) –9.5 (minimum)–3 (maximum) –20 (minimum) GLC-ZX-SM (1000BASE-ZX)5 (maximum) 0 (minimum)–3 (maximum) –23 (minimum) GLC-BX-U –3 (maximum) –9 (minimum)–3 (maximum) –19.5 (minimum) GLC-BX-D –3 (maximum) –9 (minimum)–3 (maximum) –19.5 (minimum) Table A-10 1-GB SFP Transceiver Physical and Environmental Specifications Item Specification Dimensions (H x W x D) 0.04 x 0.53 x 2.22 in. (8.5 x 13.4 x 56.5 mm) Operating temperature Storage temperature32° to 122°F (0° to 50°C) –40° to 185°F (–40° to 85°C)
A-10 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Transceivers, Module Connectors, and Cable Specifications Pluggable Transceivers 10-GB Transceivers The 10-GB transceivers include the XENPAK transceiver and the X2 transceiver. The XENPAK transceivers and X2 transceivers differ in form-factor; they are not interchangeable. Ta b l e A - 1 1 lists both 10-GB transceiver types, the modules that support them, and the applicable transceiver illustrations and specification tables. XENPAK Transceivers NoteThe dual SC connector on the X2 transceivers support network interface cables with either Physical Contact (PC) or Ultra-Physical Contact (UPC) polished face types. The connectors do not support network interface cables with an Angle Polished Connector (APC)-polished face type. Table A-11 10-GB Transceiver Types and Module Support 10-GB Transceiver Type Supported on these Modules1 1. Not all 10-GB transceiver versions may be supported on your module. Refer to your software release notes to determine if a specific 10-GB transceiver is supported on your module. Transceiver IllustrationTr a n s c e i v e r Specification Table XENPAK transceivers WS-X6704-10GE WS-SUP32-10GE-3B WS-SUP32P-10GEFigure A-6 Table A-12 (cabling specifications) Ta b l e A - 1 3 (fiber loss budgets) Ta b l e A - 1 4 (environmental specifications) X2 transceivers WS-X6708-10G-3C2 WS-X6708-10G-3CXL2 VS-S720-10G-3C VS-S720-10G-3CXL 2. Only X2 transceivers with part number revision -02 or later are supported on the module. Check the part number label on the X2 transceiver to verify its usability. Figure A-7 Table A-15 (cabling specifications) Ta b l e A - 1 6 (fiber loss budgets) Ta b l e A - 1 7 (environmental specifications)
A-11 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Transceivers, Module Connectors, and Cable Specifications Pluggable Transceivers Figure A-6 10-Gigabit XENPACK Transceiver 1Captive installation screw3Transmit optical bore 2Optical bore dust plug4Receive optical bore Table A-12 10-GB XENPAK Transceiver Specifications and Cabling Distances XENPAK Connector Nominal WavelengthNetwork Fiber Ty p eFiber Core Size (microns)Modal Bandwidth (Mhz/km)Maximum Cable Distance1 XENPAK-10GB-CX4 InfiniBand 4X N/A CX4 (copper) — — 49 ft (15 m)2 XENPAK-10GB-SR SC duplex 850 nm MMF 62.5 62.5 50.0 50.0 50.0160 200 400 500 200083.3 ft (25 m) 108.3 ft (33 m) 216.5 ft (66 m) 269.0 ft (82 m) 984.3 ft (300 m) XENPAK-10GB-LX4 SC duplex 1310 nm MMF 62.5 50.0 50.0500 400 500984.3 ft (300 m) 787.4 ft (240 m) 984.3 ft (300 m) 2 99376 RX TX 1 34
A-12 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Transceivers, Module Connectors, and Cable Specifications Pluggable Transceivers Ta b l e A - 1 3 lists the fiber loss budgets for the 10-GB XENPAK transceivers. Ta b l e A - 1 4 lists the physical and environmental specifications for the XENPAK transceivers. XENPAK-10GB-LR XENPAK-10GB-LW 3 SC duplex 1310 nm SMF G.6524— 6.2 mi (10 km) XENPAK-10GB-ER 5SC duplex 1550 nm SMF G.6524— 24.9 mi (40 km) XENPAK-10GB-ZR SC duplex 1550 nm SMF G.652 — 50 mi (80 km) 1. Cable distances are based on fiber loss. Additional factors, such as the number of splices and the optical quality of the fiber, can affect cabling distances. Minimum cabling distance for all types is 2 m according to the IEEE 802.3ae standard. 2. The Cisco XENPAK-10GB-CX4 transceiver supports link lengths of up to 49.2 feet (15 m) on CX4 cable. Cisco offers four CX4 cables: CAB-INF-28G-1= (1 meter cable), CAB-INF-28G-5= (5 meter cable), CAB-INF-28G-10= (10 meter cable), and CAB-INF-26G-15= (15 meter cable). 3. The XENPAK-10GB-LW (WAN PHY) supports a link length of 6.2 miles (10 km) on standard SMF (G.652). The WAN PHY allows 4. ITU-T G.652 SMF as specified by the IEEE 802.3z standard. 5. Requires a 5 db 1550 nm fixed loss attenuator for cable distances less than 12.43 miles (20 km). The attenuator is available from Cisco Systems (p/n WS-X6K-5DB-ATT=). The attenuator is installed on the receiver side of the transceiver. Table A-12 10-GB XENPAK Transceiver Specifications and Cabling Distances (continued) XENPAK Connector Nominal WavelengthNetwork Fiber Ty p eFiber Core Size (microns)Modal Bandwidth (Mhz/km)Maximum Cable Distance1 Table A-13 Fiber Loss Budgets for the 10-GB XENPAK Transceivers 10-GB XENPAK Transceiver Product NumberTransmit (dBm) Receive (dBm) XENPAK-10GB-SR –1 (maximum) –7.3 (minimum)–1 (maximum) –9.9 (minimum) XENPAK-10GB-LX4 –0.5 per lane (maximum) –6.75 (minimum)–0.5 per lane (maximum) –14.4 per lane (minimum) XENPAK-10GB-LR XENPAK-10GB-LW0.5 (maximum) –8.2(minimum)0.5 (maximum) –14.4 (minimum) XENPAK-10GB-ER 4 (maximum) –4.7 (minimum)–1 (maximum) –15.8 (minimum) XENPAK-10GB-ZR 4 (maximum) 0 (minimum)–7 (maximum) –24 (minimum) Table A-14 10-GB XENPAK Transceiver Physical and Environmental Specifications Item Specification Dimensions (H x W x D) 0.47 x 1.42 x 4.76 in. (18 x 36 x 121 mm) Operating temperature Storage temperature32° to 122°F (0° to 50°C) –40° to 185°F (–40° to 85°C)