Cisco 6500e Manual
Have a look at the manual Cisco 6500e Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 53 Cisco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
A-61 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Power Supply Specifications 8700 W AC-Input Power Supply Remote Power-Cycling Operation This feature allows you to remotely power cycle the Catalyst 6500 series switch using any appropriate third-party relay controller. This eliminates the need for you to have access to the supervisor engine console or CLI to control power cycling. Ta b l e A - 4 0 lists the relay controller box relay type, the corresponding power supply terminal block positions, and a description of the power-cycling operation. Table A-40 8700 W Power Supply Relay Controller Switch Settings and Operation External Relay Controller Box Relay Ty p ePower Supply Relay Controller Switch SettingPower Supply Terminal Block Positions UsedRemote Power-Cycling Operation Normally open (NO) relay.NO RELAY (DEFAULT)Control wires from the external relay controller box attach to terminal block positions 1 and 2. Power supply cycled from on to off—The power supply is powered off by energizing the relay (relay contacts go from open to closed) for more than 30 seconds. Power supply cycled from off to on—The power supply is powered on by deenergizing the relay (relay contacts go from closed to open) for more than 10 seconds. Normally closed (NC) relay.NC RELAY Control wires from the external relay controller box attach to terminal block positions 2 and 3. Power supply cycles from on to off—The power supply is powered off by energizing the relay (relay contacts go from closed to open) for more than 30 seconds. Power supply cycles from off to on— The power supply is powered on by deenergizing the relay (relay contacts go from open to closed) for more than 10 seconds. No relay attached. Remote power-cycling feature not installed.NO RELAY (DEFAULT)——
A-62 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Power Supply Specifications 8700 W AC-Input Power Supply 8700 W Power Supply AC Power Cords Ta b l e A - 4 1 lists the specifications for the AC power cords that are available for the 8700 W AC-input power supply. Included in the table are references to illustrations of the power cords. TableA-41 8700W Power Supply AC Power Cords Locale Power Cord Part NumberAC Source Plug Type Cordset Rating Power Cord Reference Illustration Argentina CAB-7513ACR= or CAB-IR2073-C19-AR=IRAM 2073 16 A, 250 VACFigure A-31 Australia, New Zealand CAB-AC-16A-AUS= AU20S3 16 A, 250 VACFigure A-46 People’s Republic of China CAB-AC16A-CH= GB16C 16 A, 250 VACFigure A-37 Continental Europe CAB-AC-2500W-EU= CEE 7/7 16 A, 250 VACFigure A-41 International CAB-AC-2500W-INT= IEC 309 16 A, 250 VACFigure A-42 Israel CAB-AC-2500W-ISRL= SI16S3 16 A, 250 VACFigure A-34 Italy CAB-7513ACI= CEI 23-16/7 16 A, 250 VACFigure A-35 Japan, North America (nonlocking plug) 200–240 VAC operationCAB-AC-2500W-US1= NEMA 6-20 16 A, 250 VACFigure A-43 Japan, North America (locking plug) 200–240 VAC operationCAB-AC-C6K-TWLK= NEMAL6-20 16A, 250VACFigure A-44 Japan, North America 100–120 VAC operationCAB-7513AC= 1 1. When operating with 100–120 VAC, you must use two or three AC power cords and the power supply output is limited to either 2800 W (2 inputs) or 4200 W (3 inputs). NEMA 5-20 16 A, 125 VACFigure A-36 Power Distribution Unit (PDU 2 2. The PDU power cable is designed for users who power their switch from a PDU. The end of the cable that plugs into the chassis power supply has a C19 connector; the other end of the cable that connects to the PDU has a C20 connector. CAB-C19-CBN= IEC 60320 C19 IEC 60320 C20 16 A, 250 VACFigure A-47 Switzerland CAB-ACS-16= SEV 5934-2 Type 23 16 A, 250 VACFigure A-45
A-63 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Power Supply Specifications AC Power Cord Illustrations AC Power Cord Illustrations This section contains the AC power cord illustrations (see Figures A-19 through A-48). An AC power cord may be used with several power supplies. See the power supply specifications tables for the AC power cord illustrations that are applicable for your power supply. Figure A-20 CAB-AC10A-90L-AU= (Australia and New Zealand) Figure A-21 CAB-AC10A-90L-EU= (Continental Europe) Connector: IEC 60320 C15 Plug: SAA AS 3112Cordset rating: 10 A, 250 V Length: 8 ft 2 in. (2.5 m) 113341 Connector: IEC 60320 C15 Cordset rating: 10 A, 250 V Length: 8 ft 2 in. (2.5 m) Plug: CEE 7/7 113342
A-64 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-22 CAB-AC10A-90L-IT= (Italy) Figure A-23 CAB-AC15A-90L-US= (Japan and United States) Figure A-24 CAB-AC10A-90L-UK= (United Kingdom) Connector: IEC 60320 C15 Cordset rating: 10 A, 250 V Length: 8 ft 2 in. (2.5 m) Plug: CEI 23-16/7 113343 Connector: IEC 60320 C15 Cordset rating: 15 A, 125 V Length: 8 ft 2 in. (2.5 m) Plug: NEMA 5-15 113344 Connector: IEC 60320 C15 Cordset rating: 10 A, 250 V Length: 8 ft 2 in. (2.5 m) Plug: BS 1363 113345 13 A fuse
A-65 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-25 CAB-7KACR= (Argentina) Figure A-26 CAB-7KACA= (Australia and New Zealand) Figure A-27 CAB-7KACE= (Continental Europe) Plug: IRAM 2073Cordset rating: 10 A, 250 V Length: 8 ft 2 in. (2.5 m) 113346 Connector: IEC 60320 C15 Connector: IEC 60320 C15 Cordset rating: 10 A, 250 V Length: 8 ft 2 in. (2.5 m) Plug: SAA AS 3112 113347 Connector: IEC 60320 C15 Cordset rating: 16 A, 250 V Length: 8 ft 2 in. (2.5 m) Plug: CEE 7/7 113348
A-66 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-28 CAB-7KACI= (Italy) Figure A-29 CAB-7KAC-15= (Japan and United States) Figure A-30 CAB-7KACU= (United Kingdom) Plug: CEI 23-16/7 Cordset rating: 10 A, 250 V Length: 8 ft 2 in. (2.5 m) 113349 Connector: IEC 60320 C15 Cordset rating: 15 A, 125 V Length: 8 ft 2 in. (2.5 m) 113350 Connector: IEC 60320 C15 Plug: NEMA 5-15 Cordset rating: 10 A, 250 V Length: 8 ft 2 in. (2.5 m) 113351 Connector: IEC 60320 C15Plug: BS 136313A fuse
A-67 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-31 CAB-7513ACR= and CAB-IR2073-C19-AR= (Argentina) Figure A-32 CAB-7513ACA= (Australia and New Zealand) Figure A-33 CAB-7513ACE= (Continental Europe) Plug: IRAM 2073Cordset rating: 10 A, 250 V Length: 14 ft 0 in. (4.26 m) 113352 Connector: IEC 60320 C19 Cordset rating: 15 A, 250 V Length: 14 ft 0 in. (4.26 m) 113353 Connector: IEC 60320 C19 Plug: SAA AS 3112 Cordset rating: 16 A, 250 V Length: 14 ft 0 in. (4.26 m) 113354 Connector: IEC 60320 C19 Plug: CEE 7/7
A-68 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-34 CAB-AC-2500W-ISRL (Israel) Figure A-35 CAB-7513ACI= (Italy) Figure A-36 CAB-7513AC= (Japan and United States) Plug: SI16S3Cordset rating: 16 A, 250 V Length: 14 ft 0 in. (4.26 m) 130113 Connector: IEC 60320 C19 Cordset rating: 16 A, 250 V Length: 14 ft 0 in. (4.26 m) Plug: CEI 23-16/7 113355 Connector: IEC 60320 C19 Cordset rating: 20 A, 125 V Length: 14 ft 0 in. (4.26 m) 113356 Connector: IEC 60320 C19 Plug: NEMA 5-20
A-69 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-37 CAB-AC16A-CH= (People’s Republic of China) Figure A-38 CAB-7513ACSA= (South Africa) Figure A-39 CAB-ACS-10= (Switzerland) 126792 Cordset rating: 16A, 250V Length: 14 ft 0 in. (4.26 m) Plug: GB16C Connector: IEC 60320-1 C19 Cordset rating: 16 A, 250 V Length: 14 ft 0 in. (4.26 m) 113357 Connector: IEC 60320 C19 Plug: IEC 884 Plug: SEV 1011 Cordset rating: 10 A, 250 V Length: 7 ft 0 in. (2.13 m) 113358 Connector: IEC 60320 C19
A-70 Catalyst 6500 Series Switches Installation Guide OL-5781-08 Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-40 CAB-7513ACU (United Kingdom) Figure A-41 CAB-AC-2500W-EU (Continental Europe) Figure A-42 CAB-AC-2500W-INT= (International) Cordset rating: 13 A, 250 V Length: 14 ft 0 in. (4.26 m) 113359 Plug: BS 1363 13A replaceable fuse Connector: IEC 60320 C19 Cordset rating: 16 A, 250 V Length: 14 ft 0 in. (4.26 m) 113360 Connector: IEC 60320 C19 Plug: CEE 7/7 Cordset rating: 16 A, 250 V Length: 14 ft 0 in. (4.26 m) 113361 Connector: IEC 60320 C19 Plug: IEC 309