Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

							User Programming
User Manual71
Using the Overlay
A programming overlay is packed with the telephone at the factory. This overlay should be 
used at all times in the programming mode since the functions of the telephone keys change 
during programming.
Location of Controls with the Overlay
The pictures below show the functions of the buttons of the KX-T7433, KX-T7436, KX-T7230 
and KX-T7235 in the programming mode. KX-T7431 is the same as KX-T7433 except for the 
Soft and SHIFT buttons. 
						

							User Programming
72User Manual
SECRETPAUSEPROGRAM CLEAR
STORE
FLASH SELECT
END PREV NEXT
ABC DEF
JKL MNO GHI
TUV WXYZ
OPER PQRS
SHIFT Soft-1 Soft-2 Soft-3
SECRETPAUSEPROGRAM CLEAR
STORE
FLASH SELECT
END PREV NEXT
ABC DEF
JKL MNO GHI
TUV WXYZ
OPER PQRS
SHIFT Soft-1 Soft-2 Soft-3
PROGRAM
VOLUME
SHIFT
1
4
GHI
7PRS
5JKL
8TUV
0OPER
2ABC
6MNO
9WXY
3DEF
FLASH PREV END
STORE
SELECT
NEXT
SECRETPAUSE CLEAR
Soft-1 Soft-2 Soft-3
SECRETPAUSE CLEAR
PROGRAM
Soft 1 Soft 2 Soft 3
SHIFT
VOLUME1
4
GHI
7PRS
5JKL
8TUV
0OPER
2ABC
6MNO
9WXY
3DEF
FLASH PREV END
STORE
SELECT
NEXT
KX-T7433
KX-T7431
KX-T7230
KX-T7436
KX-T7235
MODE SELECT 
						

							User Programming
User Manual73
Before entering the user programming mode
Before entering the user programming mode, confirm that:
Your telephone is on-hook, and
No calls are on hold at your telephone.
Entering the user programming mode
To enter the User Programming mode:
The display shows the Initial Message: USR-PGM NO? 
Note
If nothing is entered within five seconds after the PROGRAM button is pressed, 
programming mode is canceled.
During the programming mode, your extension is treated as a busy extension.
Only one proprietary telephone can be in programming mode at any one time.
The User Programming Password is not shown on the display for security reason. The 
password can be changed by System Programming.
Programming Guide References
[120] User Password
In this section, programs [001] through [004] are explained. Please consult with your dealer 
when you need to change the following programs:
[005] Flexible CO Button Assignment
[006] Operator / Manager Extension Assignment
[007] DSS Console Port and Paired Telephone Assignment
[008] Absent Messages
[009] Quick Dial Number Set
[012] ISDN Extension Number Set
[013] ISDN Extension Name Set
[014] VM Name Set
Press PROGRAM + + + User Programming Password (default:1234) 
						

							User Programming
74User Manual
3.1.2 Programming Methods
Advancing to the next stage
When USR-PGM NO?  is displayed, you can select one of the following:
To go to program [000], press the NEXT button.
To go to another program, enter the 3-digit program address.
Rotation of jack number
Each jack of the Digital Super Hybrid System supports the connection of a digital proprietary 
telephone and a single line device with different extension numbers (eXtra Device Port: XDP 
function). To program this function it is necessary to assign two parts for each jack. The first 
part of jack one is 01-1. The second part of jack one is 01-2. The first part of jack two is 02-1 
and so on. The NEXT and PREV buttons can be used to move from jack to jack as required.
Example
Note
The first part of a jack is for a DPT of a XDP-assigned jack. The second part is for a single line 
device. Program [600] EXtra Device Port assigns which jacks are XDP.
Entering Characters
You can enter characters to store names for speed dial numbers, extension numbers, etc., by 
using the dialing key pad and buttons.
Each of the twelve dialing keys on the dialing key pad represents seven characters. Refer to 
2.2.8 Station Speed Dialing Number/Name Assignment [KX-T7235/KX-T7431/KX-T7433/
KX-T7436 only].
Storing your data
Press STORE to store your data.
The STORE indicator lights red and a confirmation tone sounds.
*Confirmation tone (one beep)
After pressing STORE, you will hear a beep. This informs you that storage has been 
completed successfully.
*Alarm tone (three beeps)
If you hear this alarm, your entry is not valid.
#01-1
NEXT
PREV
#01-2
NEXT
PREV
#02-1 #02-2......
NEXT
PREV 
						

							User Programming
User Manual75
Making another selection within the same program address
To go to the next selection, press NEXT.
To go to the previous selection, press PREV.
To make a specific selection, press SELECT and then enter the number.
Accessing another program address
After pressing STORE, you can access another program by one of the following two methods:
a)To go to the next program address:
Larger program address

Press Soft 1 (SKP+) or VOLUME (DOWN).

Rotate the Jog Dial counterclockwise.
Smaller program address

Press SHIFT + Soft 1 (SKP-) or VOLUME (UP).

Rotate the Jog Dial clockwise.
b)To go to a specific program address:
Press END, then enter the program address.
Returning to the operation mode
1.
Lift the handset while in programming mode.
2.When the Initial Message: USR-PGM NO? is displayed, press the PROGRAM button.
(To display the Initial Message, press END.)  
						

							User Programming
76User Manual
3.2 User Programming
3.2.1 [000] Date and Time Set
Notice
It is assumed that you have read Section 3.1 User Programming Instructions. Soft button 
usage is explained in that section, therefore no references will be made to them in the following 
instructions. The soft buttons can be used in place of the overlay keys at any time.
Description
Sets the current date and time.
Selection
Ye a r :  00 through 99 
Month: Jan. through Dec.
Day: 1 through 31
Day of the week: SUN / MON / TUE / WED / THU / FRI / SAT
Hour: 01 through 12
Minute: 00 through 59 
AM / PM
Hour format: 12 or 24
Default
93 Jan. 1 FRI 12:00 AM 12 
						

							User Programming
User Manual77
Programming
Display PT
Dial 000. Enter the year
(last 2 digits).
000year


Press NEXT.
NEXT
Press →.
Keep pressing SELECT until
the desired month is displayed.
SELECT
Keep pressing SELECT until
the desired day of the week is
displayed.
SELECT
Press STORE.
STORE
Press NEXT.
NEXT
Enter the hour
(00 through 12).
hour
Press →.
Press END.
END
Press STORE.
STORE
Press SELECT for
AM or PM.
SELECT
Enter the minute
(00 through 59).
minute
Press →.Press SELECT for
12 or 24 (hour 
format).
SELECT
Press →.
Enter the day
(01 through 31).
day
Press →.Press →.

000 DATE / TIME

01 Jan. 1 MON
To change the current entry, press
CLEAR and enter the new year.

12:00 AM   12
To change the current entry,
press CLEAR and enter the
new hour.
To change the current entry, press
CLEAR and enter the new day.
To change the current entry,
press CLEAR and enter the
new minute. 
						

							User Programming
78User Manual
Conditions
After changing an entry, you can press STORE. You do not have to perform the rest of the 
steps.
To return to the previous field, press   in steps 4 through 9 and steps 13 through 18.
If you hear an alarm after pressing STORE, check that the date is valid.
The clock starts immediately after the STORE button is pressed.
You cannot leave an entry empty.
Features Guide References
Display, in Idle  
						

							User Programming
User Manual79
3.2.2 [001] System Speed Dialing Number Set
Description
Used to program the System Speed Dialing numbers. These numbers are available for any 
extension user in the system.
Selection
Speed dial numbers: 000 through 499 
Telephone number: 24 digits (max.) 
Default
All speed dial numbers — Not Stored 
						

							User Programming
80User Manual
Programming
Conditions
Each speed dial number has a maximum of 24 digits. The valid characters are 0 through 9, 
, and # keys, and the FLASH, PAUSE, SECRET and
–(hyphen) buttons.
— To store the flash signal, press FLASH.
Note
: The Stored flash will only be effective during an established call.
— To store a hyphen, press the – button.
Display PT
Dial 001. Enter a speed dial number
(000 through 499).
speed dial no.

Press NEXT.
NEXT
 
SPD Code?→
To enter speed dial number 000,
you can also press NEXT.

000:Not Stored
Press END.
END
 [When SELECT is pressed]
Repeat these steps
Enter a telephone number.
telephone no.
Press STORE.
STORE
Press NEXT or
PREV or SELECT.Enter the desired speed
dial number
(000 through 499).
speed dial no.
To delete the current entry, press CLEAR. 
To change the current entry, press CLEAR
and enter the new number.
001
001 SYS SPD DIAL
NEXT
PREV
SELECT