Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

							Station Features and Operation (DPT/SLT)
User Manual181
Executive Busy Override Deny
It is possible for extension users (if allowed by Class of Service Programming) to prevent 
this feature from being executed by another extension user.
Confirmation tone
When a 2-party call is changed to a 3-party call and vice versa, a confirmation tone is sent 
to all three parties. This tone can be eliminated by System Programming.
Terminate one party and talk to the other
This feature can be performed only during conference with an outside party and inside 
party.
Programming Guide References
[505] Executive Busy Override
[601] Class of Service
[990] System Additional Information
User Manual References
4.3.30 Conference
4.3.33 Data Line Security
4.3.42 Executive Busy Override Deny 
						

							Station Features and Operation (DPT/SLT)
182User Manual
4.3.41 Executive Busy Override — Outside Line [PT only] 
Allow you to connect to an existing outside call or add a third party to your existing 
conversation.
Setting
To leave the conference
To terminate one party and talk to the other
Conditions
Executive Busy Override Deny
Extension users can prevent this function from being executed by another extension user.
Class of Service
Class of Service programming determines the extension that can perform this feature. 
The pre-assigned extension users can interrupt an existing outside call even if access to that 
line is not allowed by System Programming.
This feature does not work if Executive Busy Override Deny or Data Line Security is set at 
the extension engaged in the existing outside call.
Confirmation tone
When a 2-party call is changed to a 3-party call and vice versa, a confirmation tone is sent 
to all three parties. This tone can be eliminated by System Programming.
PT
Confirmation tone
(optional)Press the red lit CO 
corresponding to the
desired caller. Lift the handset or press
SP-PHONE/MONITOR.
A three-party conference
is now established.(CO)
PT
Hang up or pressSP-PHONE/MONITOR.
The other two parties
continue their conversation.
PT
Confirmation tone
(optional)Press CO or INTERCOMof the party to remain connected.
or(CO)INTERCOM 
						

							Station Features and Operation (DPT/SLT)
User Manual183
Programming Guide References
[505] Executive Busy Override
[601] Class of Service
[990] System Additional Information
User Manual References
4.3.30 Conference
4.3.33 Data Line Security
4.3.42 Executive Busy Override Deny 
						

							Station Features and Operation (DPT/SLT)
184User Manual
4.3.42 Executive Busy Override Deny
Allows you to prevent other extension users from interrupting your telephone conversation.
Conditions
Class of Service
Class of Service programming determines the extensions that can perform this feature.
With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can execute this feature 
using the display operation.
Programming Guide References
[506] Executive Busy Override Deny
User Manual References
4.3.41 Executive Busy Override — Outside Line [PT only]
4.3.40 Executive Busy Override — Extension
4.5.9 KX-T7235 Display Features - System Feature Access Menu
4.5.12 KX-T7431 / KX-T7433 / KX-T7436 Display Features - System Feature Access Menu
Any Telephone
To set: Dial 7331.
To cancel: Dial 7330.Lift the handset or pressSP-PHONE/MONITOR.
Hang up or press
SP-PHONE/MONITOR.Confirmation tone
and dial tone
733
733
To set.
To cancel.1
0

When setting:
When canceling:
Busy Ovrde AllowBusy Ovrde Deny 
						

							Station Features and Operation (DPT/SLT)
User Manual185
4.3.43 External Feature Access
Allows you to access special features (e.g., Call Waiting) offered by a host PBX, Centrex or 
Central Office. This feature is effective only during an outside call.
You can access the feature by using either the FLASH button or the feature number.
Using the FLASH button
Using the feature number
EFA
S1
S2S3
During a conversation with an outside party;
Press EFA (S2).
7230 / 7235 / 7433 / 7436
Enter the desired
service code.
code
PT
Press FLASH.
Enter the desired
service code.
code
During a conversation with an outside party;
FLASH
The current call is placed on hold.
PT and SLT
For SLT
For PT: Press TRANSFER.
For SLT: Flash the hookswitch.Enter the desired
service code.
For PT
code
During a conversation with an outside party;
Dial 6.
6
TRANSFER
The current call is placed on hold.
Dial tone 
						

							Station Features and Operation (DPT/SLT)
186User Manual
Conditions
Flash Time
The flash time must be assigned as required by the Centrex, host PBX or outside line.

Memory Dialing
During outside calls, a FLASH stored in System Speed Dialing, Station Speed Dialing 
or One-Touch Dialing works as External Feature Access, not as Flash (Disconnect 
Signal).

This feature does not function, if an SLT has a call on Consultation Hold.
Programming Guide References
[413] Flash Time
[990] System Additional Information
User Manual References
4.3.44 Flash [PT only] 
						

							Station Features and Operation (DPT/SLT)
User Manual187
4.3.44 Flash [PT only]
You can disconnect the current call and make another call without hanging up.
Conditions
A disconnection signal must be selected by System Programming in order to execute this 
feature.
Programming Guide References
[414] Disconnect Time
[990] System Additional Information
User Manual References
4.3.43 External Feature Access
PT
Press FLASH.
Dial the phone number.
phone no.
While hearing any tone, dialing, or talking;
Dial tone
FLASH 
						

							Station Features and Operation (DPT/SLT)
188User Manual
4.3.45 Full One-Touch Dialing [PT only]
The hands-free speakerphone is automatically activated. You can enter a phone number or 
access a system feature with the touch of a button.
Conditions
DSS buttons on a DSS Console can also activate this feature.
This feature must be initially assigned by Station Programming (Full One-Touch Dialing 
Assignment).
User Manual References
2.2.1 Initial Settings
2.2.2 Flexible Button Assignment
4.3.59 One-Touch Dialing [PT only]
4.3.67 Phantom Extension
4.3.72 Redial, Last Number
4.3.73 Redial, Saved Number [PT only]
PT
Press a flexible button assigned as One-Touch Dialing, 
DSS, REDIAL, or SAVE. .
The SP-PHONE indicator light turns red.
The CO or INTERCOM indicator light turns green.
Phantom,  
						

							Station Features and Operation (DPT/SLT)
User Manual189
4.3.46 Handset Microphone Mute [PT only] 
Allow you to turn off the handset microphone so you can consult privately with others in the 
room. You will still be able to hear the other party. This feature is only available for KX-T7400 
series telephone users.
Setting
Canceling
Conditions
This feature is only available during a conversation with the handset.
User Manual References
4.3.54 Microphone Mute [PT only]
PT
The AUTO ANSWER/MUTE indicator light flashes red slowly.
While on a handset call;
AUTO ANSWER
MUTE
Press AUTO ANSWER/MUTE
PT
The AUTO ANSWER/MUTE indicator light turns off.
When handset microphone mute is established;
AUTO ANSWER
MUTE
Press AUTO ANSWER/MUTE 
						

							Station Features and Operation (DPT/SLT)
190User Manual
4.3.47 Hands-free Answerback [PT only] 
You can answer an intercom call without lifting the handset.
Setting
Canceling
Conditions
Ring/Voice Intercom Alerting Mode Override
This feature overrides the Alternate Calling — Ring/Voice feature. A hands-free 
conversation mode is established as soon as a confirmation tone is sent.
This feature does not work for the following calls:
— Outside calls
— Doorphone calls
When an outside call is transferred to your extension, this feature is overridden and a ringing 
tone is heard.
This feature is not available for KX-T7250.
User Manual References
4.3.3 Alternate Calling — Ring / Voice
PT
Press AUTO ANSWER/MUTE.
When the SP-PHONE and the AUTO ANSWER/MUTE indicator are off; 
AUTO ANSWER
MUTE
The AUTO ANSWER/MUTE indicator turns on.
PT
Press AUTO ANSWER/MUTE.
When the AUTO ANSWER/MUTE indicator is on;
AUTO ANSWER
MUTE
The AUTO ANSWER/MUTE indicator turns off.