Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

							Station Features and Operation (DPT/SLT)
User Manual151
The call waiting tone is generated when an outside call, a doorphone call is received, or 
when an extension caller executes Busy Station Signaling.
Data Line Security
Setting Data Line Security temporarily cancels Call Waiting which has been turned on by 
an extension user.

Call Waiting Tone Type Selection
For PT users, two types of call waiting tones are provided to prevent them from missing 
the tone. A Call Waiting Tone type can be selected either by Station or System 
Programming.
With the KX-T7431, KX-T7433, KX-T7436 and KX-T7235, you can set or cancel this 
feature using the display operation.

This feature is not available for ISDN telephones.
User Manual References
2.2.1 Initial Settings
4.3.7 Busy Station Signaling (BSS)
4.3.33 Data Line Security
4.3.56 Off-Hook Call Announcement (OHCA)
4.3.57 Off-Hook Call Announcement (OHCA) —Whisper [PT only]
4.5.9 KX-T7235 Display Features - System Feature Access Menu
4.5.12 KX-T7431 / KX-T7433 / KX-T7436 Display Features - System Feature Access MenuCalling extension Called extension
COS-OHCA 
assignmentCall Waiting setting
OFF ON
0123
Disable———BSS BSS BSS
Enable———BSS OHCA
*1 BSS
*1OHCA (Off-Hook Call Announcement) is activated when the called extension is KX-T7235 or KX-T7436.
W-OHCA*2  
OHCA  BSS
*2Whisper OHCA is activated when both calling and called extensions are using one of the KX-T7400 series PT. 
						

							Station Features and Operation (DPT/SLT)
152User Manual
4.3.28 Call Waiting from Central Office
During a conversation, a call waiting tone offered by the local Central Office signals your 
extension that there is another call waiting. You can answer the second call by placing the first 
call on hold.
Using the FLASH button
Using the feature number
7230 / 7235 / 7433 / 7436
FEA
S1
S2S3
While hearing a Call Waiting tone through the handset;
Press EFA(S2).
The current call is placed on hold and you can
talk to the second caller.
PT
Press FLASH.
While hearing a Call Waiting tone through the handset;
FLASH
The current call is placed on hold and
you can talk to the second caller.
SLT
Flash the hookswitch.
While hearing a Call Waiting tone through the handset;
Dial 6.
6
The first party is placed on hold.  You can talk to the second party. 
						

							Station Features and Operation (DPT/SLT)
User Manual153
Conditions
This is an optional telephone company service.
For more information, consult the local telephone company.

You can return to the original party by pressing the FLASH or EFA (S2) button again.

You can return to the original party by flashing the hookswitch and then dialing 6 again. 
						

							Station Features and Operation (DPT/SLT)
154User Manual
4.3.29 Camp-On Transfer to Phantom Extension
Allows you to transfer a call to busy phantom extensions.
The call is transferred when at least one extension becomes free.
Conditions
If the destination extension does not become free within twelve rings (default), Transfer 
Recall occurs. If the transferred call is an outside call, it is possible to select whether 
Transfer Recall will go to the initiating extension or to Operator 1 by System Programming.
If there is no answer within thirty minutes after Transfer Recall starts, the line will be 
disconnected.
PT 
Hang up or press 
SP-PHONE/MONITOR.
Dial the destination phantom 
extension number.
phantom extension no.
 Dial tonePress TRANSFER.
TRANSFER
During  a conversation;
Confirmation 
tone Busy tone 
SLT
Hang up.
Dial the destination phantom 
extension number.
phantom extension no.
 Dial toneFlash the 
hookswitch.
During  a conversation;
Confirmation 
tone Busy tone  
						

							Station Features and Operation (DPT/SLT)
User Manual155

If you misdial, press the FLASH button, and re-enter the number.

If you want to return to the held call, flash the hookswitch before the destination 
extension answers.
Programming Guide References
[201] Transfer Recall Time
[990] System Additional Information
User Manual References
4.3.67 Phantom Extension 
						

							Station Features and Operation (DPT/SLT)
156User Manual
4.3.30 Conference
During a two-party conversation, you can add a third party to make a three-party conference. 
The members of a conference on a line may be three extensions, one extension and two outside 
lines, or two extensions and one outside line.
To establish a conference
SLT
PT
Dial the phone 
number of the 
third party.Talk to the 
third party.
During a two-party conversation;
Flash the hookswitch.Dial 3.Flash the hookswitch.
A three-party 
conference 
is now established.phone no.
Confirmation 
tone (optional)Confirmation 
tone and dial
tone
3
You must dial a line access code (9 or 81 through 88) 
as the first digit when calling an outside party.
The other party is placed on hold.
Dial the phone 
number of the 
third party.Talk to the 
third party.
During a two-party conversation;
phone no.
Confirmation 
tone (optional)Confirmation 
tone and dial 
tone Press CONF. Press CONF.
CONFCONFA three-party 
conference 
is now established.
You must dial a line access code (9 or 81 through 88) 
as the first digit when calling an outside party.
The current party is placed on hold.
The CONF indicator light flashes red slowly.
The CONF indicator light turns steady red.
The corresponding CO or INTERCOM 
indicator light turns green
. 
						

							Station Features and Operation (DPT/SLT)
User Manual157
To leave the conference
To terminate one party and talk to the other
To talk to the third party while holding the original party
PT and SLT
Hang up or press SP-PHONE/MONITOR.
The other two parties may continue their conversation.
If both other two parties are on outside lines, they will be disconnected.
PT
Aconversation with the desired party is established and the other party is
disconnected.
This operation is available only when the extension user established the
conference call by using two different line access buttons.
(Not available when only one button is used.)
or
Talk. Press the CO or INTERCOM of 
the party to remain connected.Confirmation tone
(optional)
(CO)INTERCOM
PT
If both other two parties are extensions, the INTERCOM
indicator light flashes green moderately.
Talk to the third party. Press TRANSFER.Confirmation tone
(optional)
TRANSFER 
						

							Station Features and Operation (DPT/SLT)
158User Manual
To talk to the original party while holding the third party
To put both parties on hold
Conditions
Up to six conference calls are allowed simultaneously.
Executive Busy Override, Privacy Release
A 3-party conference call is also established by Executive Busy Override or Privacy 
Release.
Confirmation tone
When a 2-party call is changed to a 3-party conference call or vice versa, a confirmation 
tone is sent to all three parties. Eliminating the tone is programmable.

Pressing a CO button which is not in the conference, allows you to exit from the 
conference leaving the other two parties connected unless they both are on outside lines. 
If they both are on outside lines, they will be disconnected.
You can return to the original party before the third party answers by pressing the 
TRANSFER button.
CONF button is not provided on your KX-T7250. However, it can be assigned to a 
flexible (CO, DSS, PF) button by Station, User or System Programming.

You can return to the original party before the third party answers by flashing the 
hookswitch.

This feature is not available for ISDN telephones.
SLT
Talk to the original party.Flash the hookswitch.Confirmation tone 
(optional)
PT
Press HOLD.
HOLD
This feature is only available when at least one party is on an
outside line. 
						

							Station Features and Operation (DPT/SLT)
User Manual159
Programming Guide References
[990] System Additional Information
User Manual References
2.2.2 Flexible Button Assignment
4.3.31 Conference, Unattended [PT only]
4.3.40 Executive Busy Override — Extension
4.3.41 Executive Busy Override — Outside Line [PT only]
4.3.69 Privacy Release [PT only] 
						

							Station Features and Operation (DPT/SLT)
160User Manual
4.3.31 Conference, Unattended [PT only]
When you are in a conference with two outside parties, you can leave the three-party 
conference allowing the other two parties to continue their conversation.
To establish an Unattended Conference
To return to the conference
To answer Hold Recall (To return to the conference on the line)
Conditions
When an Unattended Conference is established, an alarm tone is sent to both outside parties 
fifteen seconds before the assigned duration time limit (default: 10 min). Hold Recall is 
activated to the extension that leaves the conference fifty seconds before the time out. The 
call is disconnected at the time out unless the extension returns to the conference.
If you are off-hook and hear Hold Recall during the Unattended Conference mode, the 
display flashes CO 02 & CO 03, for example, for five seconds at fifteen second intervals.
Whether an extension is able to establish a Conference, Unattended depends on the Class 
of Service
*1 assignment.
PT
Press CONF to leave the conference.
During a conversation with two outside parties;
CONF
An outside-to-outside line call between the other two parties is established.
PT
Press CO flashing green moderately.
(CO)
PT
Lift the handset or
press SP-PHONE
/MONITOR.Press CO button which
is flashing rapidly.
While hearing Hold Recall;
or(CO)