Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

							APPENDIX
User Manual371
6.1.2 Feature Number List
Numbers listed below are the initial factory settings (default value). There are flexible feature 
numbers and fixed feature numbers. To change the flexible feature numbers, System 
Programming is required. For programming instructions, please consult with your dealer. 
Some Additional Required Digits are different depending on the mode of the Digital Super 
Hybrid System your telephone is connected to.
Flexible Feature Numbers
Feature Default Additional Digits
1st hundred block extension 1 0-9, 00-99
2st hundred block extension 2 0-9, 00-99
3st through 16th hundred block extension 
block—0-9, 00-99
Absent Message capability set/cancel 750 1-9 / 0
Account Code Entry 49 Account code + # (99)
Automatic Callback Busy (Camp-On) cancel 46
Background Music (BGM) — External on/off 35
Call Forwarding — set/cancel 710 2-6 / 0
Call Forwarding — Follow Me set/cancel 710 7/8
Call Hold 50
Call Hold, Retrieve outside call 53 01-08 (for KX-TD816)
01-48 (for KX-TD1232)
Call Hold, Retrieve intercom call 51 extension no.
Call Log Incoming set/cancel 56 1/0
Call Log Lock Incoming lock 57 000-999 twice
Call Log Lock Incoming Unlock 57 000-999 (same lock code)
Call Park/Call Park Retrieve 52 0-9
Call Pickup, Directed 41 EXTN. (extension no.)
Call Pickup, Group 40
Call Pickup, Outside Line
4
Call Pickup Deny set/cancel 720 1/0
Call Waiting set/cancel 731 1/0
CTI Code Entry—CTI code + # (99)
Data Line Security set/cancel 730 1/0
Do Not Disturb (DND) set/cancel 710 1/0 
						

							APPENDIX
372User Manual
Doorphone Call calling / door open 31 / 55 1-2 (for KX-TD816); 1-4 (for KX-TD1232)
Electronic Station Lockout set 77 000-999 twice
Electronic Station Lockout cancel 77 000-999
Executive Busy Override Deny set/cancel 733 1 / 0
External Feature Access 6
Hotel Application — Room Status 736
Live Call Screening (LCS) Password set 799 000-999 twice
Live Call Screening (LCS) Password cancel 799 000-999
Log-In/Log-Out 45 1 / 0
Message Waiting set/cancel 70 1+extension no. / 0+extension no.
Message Waiting call back 70 2
Night Service (Day / Night / Lunch / Break) 78 0-3
Off-Hook Call Announcement (OHCA) set/
cancel731 2 / 0
Operator Call 0
Outgoing Message (OGM) recording/
playback
*1
36 1+OGM No. (1-4) / 2+OGM No. (1-4)
Outward Dialing — Line Access, Automatic/
ARS9
Outward Dialing — Outside Line Group 8 1-8
Paging — All 32 / 33
Paging — Deny set/cancel 721 1 / 0
Paging — External all 32 0
Paging — External particular 32 1-2 (for KX-TD816); 1-4 (for KX-TD1232)
Paging — External Answer/TAFAS Answer  42 1-2 (for KX-TD816); 1-4 (for KX-TD1232)
Paging — Group all / particular 33 0 / 1-8
Paging — Group Answer 43
Paralleled Telephone Connection set/cancel 39 1 / 0
Pickup Dialing (Hot Line) assign/set/cancel 74 2+phone no. + # / 1 / 0
Redial, Last Number (for SLT) #
Station Program clear 790
Station Speed Dialing
30-9 Flexible Feature Numbers
Feature Default Additional Digits 
						

							APPENDIX
User Manual373
Station Speed Dialing programming 30 (0-9)+phone no. + #
System Speed Dialing (for SLT) 000-499
System Working Report print out / clear 794 1 / 0
Timed Reminder set 76 1+hhmm
*2+(0 / 1)+(0 / 1)
Timed Reminder cancel/confirm 76 0 / 2
Timed Reminder, Remote set
71+extension no. +hhmm
*2+(0 / 1)+(0 / 1)
Timed Reminder, Remote cancel/confirm
70+extension no. / 2+extension no.
Walking COS set 47 Walking COS password+your extension no.
Whisper OHCA set/cancel 731 3 / 0
*1Available for the KX-TD1232 only*2hhmm hh: hour(01-12) mm: minute(00-59)
Fixed Feature Numbers
Feature Default
While a busy tone is heard:
Automatic Callback Busy (Camp-On)
Busy Station Signaling (BSS)
Executive Busy Override
Off-Hook Call Announcement (OHCA)
OHCA, Whisper6
1
2
1
1
While Do Not Disturb tone is heard:
Do Not Disturb (DND) Override1
During calling or talking:
Account Code Delimiter
Alternate Calling — Ring/Voice
Conference
Door open
Pulse to Tone Conversion#/99
3
5
#
When the telephone is on-hook:
Background Music (BGM) on/off
Day/Night mode display
Date and Time display/Self-Extension Number 
and name display switching1
# Flexible Feature Numbers
Feature Default Additional Digits 
						

							APPENDIX
374User Manual
Conditions
Extension numbers can be three or four digits in length. Any number can be set as the 
leading first or second digit.
Flexible feature numbers can only be dialed while a dial tone is heard.
When    or # are included in a feature number, it will not be possible for users with dial 
pulse (DP) telephones to access the feature.
Programming Guide References
[003] Extension Number Set
[100] Flexible Numbering
User Manual References
3.2.4 [003] Extension Number Set 
						

							APPENDIX
User Manual375
6.1.3 Tone List
1 s
Confirmation Tone 1
Confirmation Tone 2
Confirmation Tone 3
Confirmation Tone 4
Dial Tone 1
Dial Tone 2
Dial Tone 4
Busy Tone
Ringback Tone 1
Ringback Tone 2
Do Not Disturb (DND)
Tone
Reorder Tone
Dial Tone 3

Outside-to-Outside Line 
Call Limit Warning Tone 
						

							APPENDIX
376User Manual
Hold Recall
15 s
Call Waiting Tone 1

1 s
Outside Calls /
Outside Call Hold Recall
Intercom Calls /
Intercom Hold Recall
Doorphone Calls /
Timed Reminder
Callback Ringing
(Camp-on Recall)
5 s
Call Waiting Tone 2
(outside line)
Call Waiting Tone 2
(intercom)
15 s 
						

							APPENDIX
User Manual377
6.1.4 Troubleshooting
If a power failure should occur...
Your System enables conversations between specific outside lines and extensions (Power 
Failure Transfer), and supports system data backup.
Power Failure Transfer
Specific extensions are automatically connected straight to specific outside lines. This provides 
outside line conversations between the pre-assigned extensions and outside lines:

Outside line 01 is connected to extension jack number 01.
Outside line 02 is connected to extension jack number 02.
Outside line 05 is connected to extension jack number 09.
Outside line 06 is connected to extension jack number 10.

Outside line 01 is connected to extension jack number 01.
Outside line 02 is connected to extension jack number 02.
Outside line 03 is connected to extension jack number 09.
Outside line 04 is connected to extension jack number 10.
Outside line 09 is connected to extension jack number 17.
Outside line 10 is connected to extension jack number 18.
All other conversations are disconnected during a power failure.
Digital proprietary telephones (DPTs) cannot be used during a power failure. SLTs can 
work in the event of a power failure.
When power is restored after a power failure, your system automatically restarts 
operation, maintaining as much of the previous system data as possible.
Problem Probable Cause Possible Solution
Nothing is heard in the hands-
free mode.The Headset mode is 
selected.When the headset is not used, set 
the mode to Handset.
Refer to Handset/Headset 
Selection in Station 
Programming (Section 2), or 
Initial Setting (Section 1).
The unit does not ring.The outside number is not 
programmed.
The Ringer Volume is set 
to OFF.For programming outside 
numbers, refer to the 
Installation Manual.
Increase the Ringer Volume. 
Refer to Initial Setting 
(Section 1). 
						

							APPENDIX
378User Manual
The display flashes the 
following message:The system internal clock 
does not work properly.Consult with an authorized 
Panasonic Factory Service 
Center. Problem Probable Cause Possible Solution
Set Time & Date
THU JAN01 12:00A 
						

							Index
379
Section 7
Index 
						

							Index
380
A
Absent Message Capability 100
Account Code Entry
 103
Alternate Calling — Ring / Voice
 107
ANSWER
 351
ANSWER and RELEASE Buttons Operation
 
361
Answering, Direct Outside Line
 109
AUTO ANSWER/MUTE
 28
AUTO DIAL/STORE
 28
Automatic Callback Busy
 110
B
Background Music (BGM) 113
Background Music (BGM) — External
 279
Bilingual Display Selection
 53, 364
BSS / OHCA / Whisper OHCA
 114, 150, 218
Busy Station Signaling (BSS)
 114
C
Call Forwarding / Do Not Disturb 309
Call Forwarding — All Calls
 118
Call Forwarding — Busy
 119
Call Forwarding — Busy / No Answer
 122
Call Forwarding — CANCEL
 128
Call Forwarding — Follow Me
 126
Call Forwarding — No Answer
 120
Call Forwarding — SUMMARYCall Forwarding 
— SUMMARY
 116
Call Forwarding — to Outside Line
 124
Call Hold
 130
Call Hold Retrieve
 134
Call Hold, Exclusive
 132
Call Log Lock Control, Incoming
 282
Call Log Lock, Incoming
 317
Call Log, Incoming
 311
Call Log, Outgoing
 319
Call Monitoring in Station Hunting
 320
Call Park
 136
Call Pickup Deny
 141
Call Pickup, Directed
 138
Call Pickup, Group
 139
Call Pickup, Outside Line
 140
Call Splitting
 142
Call Transfer
 360
Call Transfer — to Extension
 144
Call Transfer — to Outside Line
 147
Call Waiting
 149, 218
Call Waiting from Central Office
 152
Call Waiting Tone Type Assignment
 53
Call Waiting Tone Type Selection
 151
Camp-On Transfer to Phantom Extension
 154
Class of Service
 91
CONF
 28
Conference
 156
Conference, Unattended
 160Configuration
 16, 348
Connection
 26
CTI (Computer Telephony Integration) Code 
Entry
 162
D
Data Line Security 151, 163
Date and Time Set
 76
Direct Inward System Access (DISA)
 165
Direct Station Dialing
 357
DISA User Codes
 91
Display Contrast Adjustment
 34, 39
Display Examples
 364
Display Features
 322, 334
Display Features - Call Directory
 324, 337
Display Features - System Feature Access Menu
 
325, 342
Do Not Disturb (DND)
 169
Do Not Disturb (DND) Override
 172
Doorphone Call
 174
DSS
 351
E
Electronic Station Lockout 177
Emergency Call
 179
Entering Characters
 74
Executive Busy Override Deny
 181, 182, 184
Executive Busy Override — Extension
 180
Executive Busy Override — Outside Line
 182
Extension Name Set
 88
Extension Number Assignment
 354
Extension Number Set
 85
External Feature Access
 185
F
Feature Buttons 28, 351
Fixed Buttons
 28
Fixed Feature Numbers
 373
FLASH
 28
Flash
 187
Flexible Buttons
 28
Full One-Touch Dialing
 188, 225
Full One-Touch Dialing Assignment
 53
Function buttons
 28
FWD/DND
 28
G
General Programming Instructions 70
H
Handset Microphone Mute 189
Handset/Headset Selection
 53
Hands-free Answerback
 190
Hands-free mode
 195
Hands-free Operation
 191