Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

							Station Programming
User Manual51
Station Programming [Function Assignment]
(Preferred Line Assignment - Outgoing)
(Preferred Line Assignment 
- Incoming)
(Full One-Touch Dialing Assignment)
(Intercom Alert Assignment)
(Call Waiting Tone Type Assignment)
(Self-Extension Number Confirmation)
(Live Call Screening Mode Set)
(Initial Display Selection)
(Bilingual Display Selection)
(Handset / Headset Selection)
(Remote Station Lock Control)
- see Operator / Manager Service Features (Section 4.4)
(Call Log Lock Control, Incoming)
- see Operator / Manager Service Features (Section 4.4)
(Live Call Screening Password Control)
- see Operator / Manager Service Features (Section 4.4)
(Station Programming Data Default Set)
(Exit)
1
3
4
5
6
7
0
0
0
#
1
3
2
2
PROGRAM
(Station Speed Dialing Number / Name Assignment)
81
82
9
PROGRAM99
  : Available when the Digital Super Hybrid System is connected to a Digital Proprietary Telephone capable Panasonic
    Voice Processing System(one that supports digital proprietary telephone integration; e.g., KX-TVS100). 
						

							Station Programming
52User Manual
2.2 Station Programming
2.2.1 Initial Settings
The original setting are shown in bold letters in the shaded boxes. Find and mark your desired 
selections for programming.
— Be sure that you are in the Station Programming mode : Press [PROGRAM] [9] [9].
Preferred Line Assignment
– Outgoing
Which line do you prefer to
seize when you go off-hook
to make calls? 
To enter the programme mode
Item Selection Programming Input
No line
An idle outside line
A pre-assigned outside line
The Intercom line
01–08 (for KX-TD816)
Outside line no.
To continue
Press STORE.
Follow programming input.
programming inputAUTO DIAL
STORE
11
INTERCOM
1
1
1
2
3
PT
The STORE indicator lights.
The display shows the initial
programming mode.
01–48 (for KX-TD1232) 
						

							Station Programming
User Manual53
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Initial Display Selection
Which display do you prefer
when a call is received?
18
8Outside line name
DID extension name
Caller ID
2
3
181
1
Item Selection Programming Input
RingingIntercom Alert Assignment
Which way do you prefer to
receive an intercom call?Directly – the partys voice is
heard without ringing.
No.  Use the same tone.
(Call Waiting Tone 1)Call Waiting Tone Type Assignment
Yes.  Use a different tone.
(Call Waiting Tone 2)
You can monitor the message
through the telephone speaker.
(Hands-free mode)Live Call Screening Mode Set
Which voice mail service do
you prefer when a caller is
recording a message in your
mailbox? Only an alert tone is heard.
(Private mode)
Pressing the One-Touch
Dialing button.
No linePreferred Line Assignment
– Incoming
Which line do you prefer to
seize when you go off-hook
to receive calls?  
A pre-assigned outside line
A ringing line
Full One-Touch Dialing
Assignment
Which way do you prefer to
dial the One-Touch Dialing
feature? Going Off-hook and then pressing
the One-Touch Dialing button.
01–08 (for KX-TD816)
Outside line no.
12
3
2
3
2
32
1
1
1
1
2
2
2
4
4
5
5
7
7
HandsetHandset/Headset Selection
Which equipment will you
use as a receiver?
Headset1
2
2
28
8Bilingual Display Selection
Which language display do
you prefer?English
French
1
2
2
9
9
01–48 (for KX-TD1232)
Do you prefer to distinguish the
Call Waiting tone from an outside
line and an intercom call?  
						

							Station Programming
54User Manual
2.2.2 Flexible Button Assignment
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
To continue
Press the desired
Flexible (CO, DSS 
or PF) button you 
wish to assign as
the Account button.Follow programming 
input.Press STORE.
Live Call Screening *2
ButtonProgrammable ButtonProgramming InputCO
Direct Station Selection  (DSS)
One-Touch Dialing
MESSAGE
FWD/DND (Forward/Do Not Disturb) 
SAVE
Account
CONF (Conference)
Log-In/Log-Out
DSSPF
(max. 16 digits)
Voice Mail Transfer *2
Two-Way Record *2
Two-Way Transfer *2
Live Call Screening Cancel *2
Extension no.
Desired no. *1
Voice mail extension  no.
Phantom extension no.
Voice mail extension  no.
Voice mail extension  no.
1
2
3
4
5
6
70
7
8
Night
Phantom Extension7
90
91
92
93
1
AUTO DIAL
STOREprogramming input
2
73
The STORE indicator lights.
The display shows the initial
programming mode.
PT
Single-CO
(1–8)
Outside line no.0
Loop-CO
Group-CO
01–08 (for KX-TD816)
Outside line group no.
01–48 (for KX-TD1232) 
						

							Station Programming
User Manual55
Conditions
*1  , #, FLASH, PAUSE, SECRET (INTERCOM) and — (CONF) can also be stored.
– If you do not want to display the stored number, press the SECRET (INTERCOM) button 
before and after the numbers you wish to conceal.
– If you store an external partys number, you should first store a line access number (9, 81 
to 88).
– If you need to enter an account code, you can enter the specified account code before the 
line access number.

*
2 This button is used for the voice mail integration feature.
To exit the mode at any time, lift the handset.
Account code feature no.
49
Account code
1234
Account code delimiter
#
Automatic line
access number
9
Phone numberSECRET
[  123  4567  ] 
						

							Station Programming
56User Manual
2.2.3 Phantom Extension Ringing On/Off Set
Allows you to assign a ringing On/Off function on a Phantom button (default: On).
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.

Ring On
PT
Press Phantom you
wish to turn On/Off the 
ringing.Dial 1or 2.
-1: Ring Off
-2: Ring Onor
Press STORE. Press the same Phantom
again.
12
AUTO DIAL
(Phantom)
STORE
The STORE indicator lights.
The display shows the initial
programming mode. The display shows
the current status. 
						

							Station Programming
User Manual57
2.2.4 Ringing Tone Selection for CO Buttons
Allows you to assign a ringer frequency to each CO (default: tone type 2).
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Press CO button
which you wish to
change the ringing tone.Press STORE. Press the same 
CO button again.Enter the tone type number
(1 through 8). 
tone type no.AUTO DIAL
STORE
The display shows the current
status.
The display shows the selected tone type number and you hear
the selected tone until the STORE button is pressed.

(-x:tone type number)
If you want to change the tone type, enter another tone type
number.
Tone Type-X
PT
The STORE indicator lights.
The display shows the initial
programming mode. 
						

							Station Programming
58User Manual
2.2.5 Ringing Tone Selection for Intercom Calls
Allows you to assign a ringer frequency for intercom call (default: tone type 3).
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
The display shows the current
status.
The display shows the selected tone type number and you hear
the selected tone until the STORE button is pressed.

(-x:tone type number)
If you want to change the tone type, enter another tone type
number.
Tone Type-X
PT
Press INTERCOM.
Press STORE. Press INTERCOM again.Enter the tone type number
(1 through 8).
tone type no.INTERCOMINTERCOMAUTO DIAL
STORE
The STORE indicator lights.
The display shows the initial
programming mode. 
						

							Station Programming
User Manual59
2.2.6 Self-Extension Number Confirmation
Allows you to display your extension port physical number and extension number.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9]. 
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Dial 6.
Press HOLD (END).
6HOLDPT
The display shows the initial programming
mode. 
extension port
physical number
Jack01EXT101 
						

							Station Programming
60User Manual
2.2.7 Station Programming Data Default Set
Allows you to return each of the following items assigned by Station Programming to their 
default settings.
a)Bilingual Display Selection (default: English)
b)Call Waiting Tone Type Assignment (default: Tone 1)
c)Full One-Touch Dialing Assignment (default: on)
d)Handset/Headset Selection (default: Handset)
e)Initial Display Selection (default: Caller ID)
f)Intercom Alert Assignment (default: Ring Call)
g)Live Call Screen Mode Set (default: Hands-free)
h)Preferred Line Preference — Incoming (default: Ringing Line)
i)Preferred Line Preference — Outgoing (default: INTERCOM Line)
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
PT
Press STORE. Dial #.
AUTO DIAL
STORE
The STORE indicator lights.
The display shows the initial programming
mode. 
Clear Ready?