Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

							DSS Console Features
User Manual351
5.1.3 Feature Buttons
DSS Consoles have the following types of Feature Buttons:
DSS Buttons with Busy Lamp Field (BLF)
Used to access extensions. The BLF indicates the busy or idle status of each extension in the 
system. These buttons can also be changed to other function buttons.
PF (Programmable Feature) Buttons [KX-T7240 only]
These buttons are provided with no default settings. With a paired telephone, you can program 
the buttons as other function buttons.
ANSWER Button [KX-T7441 only]
Used to answer an incoming call.
RELEASE Button [KX-T7441 only]
Used to disconnect the line. 
						

							DSS Console Features
352User Manual
5.2 Station Programming
5.2.1 Station Programming Instructions
PF buttons are provided with no default settings, while each DSS button has a default setting 
as follows. DSS 01-32: extension numbers 101-132 (DSS 33-66: not stored).
To meet your various needs, DSS buttons can be changed to other function buttons.
Every DSS or PF button can be assigned to another extension number, telephone number or 
feature number through Station Programming.
Conditions
DSS buttons and PF buttons can be changed to any of the following feature buttons through 
Station Programming:
Button DSS PF
Features to be assigned
Another DSS (Direct Station Selection)
Phantom Extension
ONE-TOUCH (One-Touch Dialing)
MESSAGE (Message Waiting)
MESSAGE (Another/Phantom Extension)
FWD/DND (Call Forwarding/Do Not Disturb)
SAVE (Saved Number Redial)
ACCOUNT (Account Code Entry)
CONF (Conference)
Voice Mail (VM) Transfer
Two-Way Record*
Two-Way Transfer*
LCS (Live Call Screening)*
LCS (Live Call Screening) Cancel*
Night/Day (Lunch/Break) Service 
						

							DSS Console Features
User Manual353
   indicates that the feature is available.
When the STORE button is pressed after programming, you will hear beep tones as follows.
– One beep: The entry is changed from one that was stored previously.
– Two beeps: The entry is the same as on stored previously.
Programming Guide References
[007] DSS Console Port and Paired Telephone Assignment
User Manual References
2.2.2 Flexible Button Assignment * Available when the Digital Super Hybrid System is connected to a Digital Proprietary 
Telephone capable Panasonic Voice Processing System (one that supports digital 
proprietary telephone integration; e.g., KX-TVS100). 
						

							DSS Console Features
354User Manual
5.2.2 Extension Number Assignment
You can assign the desired extension number to a DSS button.
– Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
– To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
PT and DSS Console
Dial 1. Enter the desired
extension number.
extension no.
Press the desired
DSSbutton.
(DSS)
[DSS Console][Paired telephone]
Press STORE.
AUTO DIAL
STORE
[Paired telephone][Paired telephone]


(-xxxx:extension number)
To erase an incorrect entry, press the CLR (S2) button or
the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button in the
Station Programming mode.)
EXT–
CLR
EXT–xxxx
CLR
The STORE indicator lights.
The display shows the initial
programming mode.
1 
						

							DSS Console Features
User Manual355
5.2.3 One-Touch Dialing Assignment
You can assign a DSS or PF button as a One-Touch Dialing button. The number can be an 
extension number or a telephone number. Up to 16 digits can be stored into each memory 
location.
—Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
—To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
PT and DSS Console
Dial 2. Enter the desired  number
(extension number, phone
number, etc.).
2desired no.
Press the desired
DSS or PF button.
(DSS) (PF)
[DSS Console]
or[Paired telephone]
Press STORE.
AUTO DIAL
STORE
[Paired telephone] [Paired telephone]
The STORE indicator lights.
The display shows the initial
programming mode. 
Up to 16 digits can be stored.
When you assign an outside phone number, you must enter a
line access code first.
To erase an incorrect entry, press the CLR (S2) button or the
TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button in the
Station Programming mode.)
CLR 
						

							DSS Console Features
356User Manual
5.2.4 One-Touch Access Assignment for System Features
You can assign the desired feature number to a DSS or PF button.
—Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
—To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
PT and DSS Console
Dial 2. Enter the desired
feature number.
2feature no.
Press the desired
DSSor PFbutton.
[DSS Console]
or[Paired telephone]
Press STORE.
AUTO DIAL
STORE
[Paired telephone] [Paired telephone]
The STORE indicator lights.
The display shows the initial
programming mode. 
Up to 16 digits can be stored.
For example, if you wish to gain access to the Paging-All 
feature, enter the feature number 330.
To erase an incorrect entry, press the CLR (S2) button or the
TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button in the
Station Programming mode.)
CLR
(DSS) (PF) 
						

							DSS Console Features
User Manual357
5.3 DSS Console Features
5.3.1 Direct Station Dialing
An extension can be called and accessed, simply by pressing a DSS button. The BLF shows if 
the extension is busy.
PT and DSS Console
Lift the handset or press
SP-PHONE/MONITOR.Press the desired DSS button.
[DSS Console] [Paired telephone]
(DSS) 
						

							DSS Console Features
358User Manual
5.3.2 One-Touch Dialing
The stored number is dialed automatically by pressing a programmed DSS or PF button.
PT and DSS Console
Lift the handset or press
SP-PHONE/MONITOR.Press the desired
DSS or PF button.
[DSS Console]
or [Paired telephone](DSS) (PF) 
						

							DSS Console Features
User Manual359
5.3.3 One-Touch Access for System Features
You can access system features by pressing a programmed DSS or PF button.
PT and DSS Console
Lift the handset or press
SP-PHONE/MONITOR.Press the desired
DSS or PF button.
[DSS Console]
or [Paired telephone]
(DSS) (PF) 
						

							DSS Console Features
360User Manual
5.3.4 Call Transfer
A call can be transferred to an extension by using the DSS button.
One-Touch Transfer
An outside call can be transferred to an extension with an One-Touch operation.
 The One-Touch Transfer function must be set through System Programming.
Programming Guide References
[108] Automatic Hold by CO / DSS Button
PT and DSS Console
Press TRANSFER.
TRANSFER
Press the desired DSS button.
[DSS Console] [Paired telephone]
During  a conversation;
(DSS)
PT and DSS Console
Press the desired DSS button.
[DSS Console]
During  a conversation;
The other party is placed on hold and the
destination extension is called immediately.
(DSS)