Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

							Station Programming
User Manual61
2.2.8 Station Speed Dialing Number/Name Assignment [KX-T7235/
KX-T7431/KX-T7433/KX-T7436 only]
Allows you to assign frequently dialed numbers and names to each Function button on your PT.
For KX-T7235 and KX-T7436 users
To store a number
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
7235 / 7436
Press STORE. Enter the desired number
(extension number,
phone number, etc.).
desired number
AUTO DIAL
STORE
PT-PGM ModeF5
F4
F3
F2
F1
F10
F9
F8
F7
F6
Press Function (F1-F10).
The STORE indicator lights.
The display shows the initial
programming mode.
  Up to 16 digits, consisting of 0 through 9,     , #, FLASH, PAUSE, INTERCOM,
([ or ] : secret) and CONF (-:hyphen), can be stored.
  To store the telephone number of an outside party, the line access code (9 or 81
through 88) must be stored as the leading digit.
To erase the entry, press the CLR (S2) button.
To store a name, press the NEXT(S3) button and go to step 3 in To store a name
as described in the following procedure. The STORE indicator light turns off.
The display shows the current status.
(If nothing is stored, Not Stored is displayed.)

(—Outside number, 123-4567,
      is now programmed.)9-123-4567
      CLR  NEXT 
						

							Station Programming
62User Manual
To store a name
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
Refer to the Combination Tables 1 and 2 in 2.2.8 Station Speed Dialing Number/Name 
Assignment [KX-T7235/KX-T7431/KX-T7433/KX-T7436 only] for information on how to 
enter each character.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
The display shows the current status.
(If nothing is stored, Not Stored is displayed.)

(
- Name is now
programmed.)
7235 / 7436
Press Function (F1-F10). Press NEXT (S3).Enter the name.
desired name
S 1
S 2
S 3
NEXT
PT-PGM ModeF5
F4
F3
F2
F1
F10
F9
F8
F7
F6
Press STORE.
AUTO DIAL
STORE
The STORE indicator lights.
The display shows the initial
programming mode. The STORE indicator light turns off.
The display shows the current status.
Mike Graham
CLR NEXT 
						

							Station Programming
User Manual63
For KX-T7431 and KX-T7433 users
To store a number
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
7431 / 7433
Press STORE. Enter the desired number
(extension number,
phone number, etc.).
desired number
Enter a station speed dial
number (0 through 9).
station speed dial no.
AUTO DIAL
STORE
Dial        .
The STORE indicator lights.
The display shows the initial
programming mode.
Up to 16 digits, consisting of 0 through 9,    , #, FLASH, PAUSE, INTERCOM, 
([or ] : secret) and CONF (–:hyphen), can be stored.
To store the telephone number of an outside party, the line access code (9 or 81
through 88) must be stored as the leading digit.
To erase the entry, press the CLR (S2) button or TRANSFER button.
— CLR (S2) button: for KX-T7433 users
— TRANSFER button: for KX-T7431 users
To store a name, press the NEXT (S3) button (KX-T7433) or MODE button (KX-
T7431) and go to step 4 in To store a name as described in the following procedure.
The STORE indicator light turns off.
The display shows the current status.
(If nothing is stored, Not Stored is displayed.)

(—Outside number, 123-4567,
is now programmed.)9-123-4567
CLR  NEXT 
						

							Station Programming
64User Manual
To store a name
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
Refer to the Combination Tables 1 and 2 in 2.2.8 Station Speed Dialing Number/Name 
Assignment [KX-T7235/KX-T7431/KX-T7433/KX-T7436 only] for information on how to 
enter each character.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Combination Table
Each character can be entered by using the dial key pad, various buttons or the Jog Dial for 
storing names.
Combination Table 1 shows the combination of the keys and the number of times to press the 
SELECT (AUTO ANSWER/MUTE) button, or the combination of the key and the SHIFT and 
Soft buttons to enter each character. (The AUTO ANSWER/MUTE button becomes the 
SELECT button when using the overlay.)
To enter a character, find the key and number of times to press the SELECT button or the 
corresponding SHIFT and Soft button combination from the table. Press the corresponding key 
first, then press the SELECT button the required number of times. Or you can use the SHIFT 
button and a Soft button (S1 through S3) instead of the SELECT button.
The STORE indicator light turns off.
The display shows the current status. 
(If nothing is stored, Not Stored is displayed.)

(
- Name is now
programmed.)
CLR NEXT
7431 / 7433
Press NEXT (S3) or MODE.
Enter the name.
desired name
MODE
S 1
S 2
S 3
NEXTEnter a station speed dial
number (0 through 9).
station speed dial no.
Dial        .or
- NEXT(S3) button: for KX-T7433 users
- MODE button: for KX-T7431 users
 
Press STORE.
AUTO DIAL
STORE
The STORE indicator lights.
The display shows the initial
programming mode.
Mike Graham 
						

							Station Programming
User Manual65
Combination Table 2 shows the combination of keys and the number of pulses to move the 
Jog Dial (click tones) to the right. To enter a character, find the key and number pulses to rotate 
the Jog Dial. Press the corresponding key first, then rotate the Jog Dial the required number of 
times. Or, if you keep rotating the Jog Dial after pressing any dialing key, all of the characters 
in the table will be displayed.
Combination Table 1
SHIFT & 
Soft 
CombinationS1 SHIFT
+ S1S2 SHIFT
+ S2S3 SHIFT+ 
S3SHIFT+
SHIFT+
S1SHIFT+
SHIFT+
S2
Pressing
SELECT
(Times)*012345 6 7 8
Keys
11QqZz!?
2 2AaBbC c
33DdEeFf
4 4GgHh I i
55JjKkLl
66MmNnOo
77PpQqRrSs
88TtUuVv
99WwXxYyZz
00 .,:;
/+-=
##$%&@()
* If your telephone is a KX-T7431, do not use the provided SELECT button. Use the AUTO ANSWER 
/ MUTE button which becomes the SELECT button when using the overlay. 
						

							Station Programming
66User Manual
 
— Using the SELECT button;
 See Combination Table 1.
1)Press 6 and then press the SELECT button once to enter M.
2)Press 4 and then press the SELECT button six times to enter i.
3)Press 5 and then press the SELECT button four times to enter k.
4)Press 3 and then press the SELECT button four times to enter e.
— Using the SHIFT button and a Soft button;
 See Combination Table 1.
1)Press 6 and then press the S1 button to enter M.
2)Press 4 and then press the SHIFT and S3 button to enter i.
3)Press 5 and then press the S2 button to enter k.
4)Press 3 and then press the S2 button to enter e.
— Using the Jog Dial (With a KX-T7431 / KX-T7433 / KX-T7436 only)
 See Combination Table 2.
1)Press 6 and then rotate the Jog Dial one one pulse to enter M.
2)Press 4 and then rotate the Jog Dial six one pulse to enter i.
3)Press 5 and then rotate the Jog Dial four one pulse to enter k.
4)Press 3 and then rotate the Jog Dial four one pulse to enter e. Combination Table 2
Rotating 
Jog Dial
(Pulses)012345 6 7 8
keys
11QqRrSsTt
2 2AaBbC c D d
33DdEeFfGg
44GgHhIiJj
55JjKkLlMm
66MmNnOoPp
77PpQqRrSs
88TtUuVvWw
99WwXxYyZz
00 !?.,:;
/+-= # $
##$%&@()Aa 
						

							Station Programming
User Manual67
OR
1)Press 2 and then rotate the Jog Dial until Mappears.
2)Press 2 and then rotate the Jog Dial until iappears.
3)Press 2 and then rotate the Jog Dial until kappears.
4)Press 2 and then rotate the Jog Dial until eappears.
Note
Pressing the SHIFT button alternates between capital and lower case letters. Once this 
button is pressed, that letter SHIFT mode remains until SHIFT is pressed again.
To erase the last word (to backspace), press the CONF button.
(The CONF button becomes the  (backspace) key when using the overlay.)
To erase all of the data, press the CLR (S2) button.
If you keep rotating the Jog Dial, all of the characters will be displayed in order. 
  If you rotate the Jog Dial after pressing 2, all of the characters will appear 
in the following order: 
A a B b ... Z z (space) ! ? . ,  : ;   / + – = < > # $ % & @ ( ) A a B b ...
Conditions
The default is Not Stored.
Up to 10 dialing numbers and names can be assigned. Each dialing number has a maximum 
of 16 digits and each name has a maximum of 10 characters. 
						

							Station Programming
68User Manual 
						

							User Programming
User Manual69
Section 3
User Programming 
						

							User Programming
70User Manual
3.1 User Programming Instructions
3.1.1 General Programming Instructions
User Programming allows you, any extension user who knows the User Programming 
Password, to program the following system features from your telephone individually.
[000] Date and Time Set
[001] System Speed Dialing Number Set
[002] System Speed Dialing Name Set
[003] Extension Number Set
[004] Extension Name Set
[005] Flexible CO Button Assignment
[006] Operator / Manager Extension Assignment
[007] DSS Console Port and Paired Telephone Assignment
[008] Absent Messages
[009] Quick Dial Number Set
[012] ISDN Extension Number Set
[013] ISDN Extension Name Set
[014] VM Name Set
[017] DISA User Codes
To program, you need to switch your telephone to the User Programming mode.
During the programming mode, your telephone is in a busy condition for outside callers. 
If you want to make a normal call operation, you must finish the programming mode.
Default Setting
This system has default factory settings. Any required changes can be written in the 
Programming Tables.
Required Telephone Set
One of the following Proprietary Telephone (PT) sets with display is required for User 
Programming:
Digital Proprietary Telephone (DPTs): KX-T7436, KX-T7433,
KX-T7431, KX-T7235, KX-T7230.
Soft Buttons and SHIFT Button on the Display PT
Three soft buttons are provided just below the display of the following Digital Proprietary 
Telephones (DPTs): KX-T7230, KX-T7235, KX-T7433, KX-T7436.
Functions of these Soft buttons vary as the programming procedures advance step by step. 
Those functions that are currently assigned to the buttons are shown on the lower line of the 
display. If the SHIFT button indicator is on, two functions are available for each Soft button. 
To alternate between the two functions, press the SHIFT button on the right side of the display.