Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

							Station Features and Operation (DPT/SLT)
User Manual141
4.3.23 Call Pickup Deny
Allows you to prevent another extension from picking up your calls with the Call Pickup 
feature.
Setting / Canceling
Conditions

With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can execute this feature 
using the display operation.
User Manual References
4.3.20 Call Pickup, Directed
4.3.21 Call Pickup, Group
4.3.22 Call Pickup, Outside Line
4.5.9 KX-T7235 Display Features - System Feature Access Menu
4.5.12 KX-T7431 / KX-T7433 / KX-T7436 Display Features - System Feature Access Menu
Any Telephone
To set: Dial 7201.
To cancel: Dial 7200.Lift the handset or press
SP-PHONE/MONITOR.
Hang up or press
SP-PHONE/MONITOR.Confirmation tone
and dial tone
720
720
To set
To cancel1
0

When setting:
When canceling:
C.Pickup AllowC.Pickup Deny 
						

							Station Features and Operation (DPT/SLT)
142User Manual
4.3.24 Call Splitting
Allows you to have two callers on a line and alternate between them. If a call comes in while 
you are already on the line, you can place the current call (1st call) on hold and have a 
conversation with the other party (2nd call).
When you are engaged in the 2nd call (inside/outside), while placing the 1st call (inside/
outside) on hold temporarily (Consultation Hold
*1)
When you are engaged in the 2nd call (inside), while placing the 1st call (inside) on 
(exclusive) hold
When you are engaged in the 2nd call (inside/outside), while placing the 1st call (inside/
outside) on (exclusive) hold
Conditions
This feature does not work during a doorphone call or paging.
*1Consultation Hold places a call on hold temporarily to transfer it or makes a Conference call or Call Splitting.
PT
Press TRANSFER.
TRANSFERYou are connected to the 1st caller. 
Pressing the TRANSFER button alternates
between two callers.
SLT
Flash the hookswitch.
You are connected to the 1st caller. 
Flashing the hookswitch alternates between two
callers.
PT
Press HOLD.
HOLDPressing the HOLD button alternates
between two callers.
Between two extensions;
PT
Press CO or INTERCOM.
or
Press HOLD.
HOLD(CO)INTERCOM
Repeating these operations (steps 1 and 2)
alternates between two callers. 
						

							Station Features and Operation (DPT/SLT)
User Manual143
Features Guide References
Consultation Hold
User Manual References
4.3.16 Call Hold
4.3.17 Call Hold, Exclusive [PT only] 
						

							Station Features and Operation (DPT/SLT)
144User Manual
4.3.25 Call Transfer — to Extension
Allows you to transfer the call you received to another extension. There are two ways.
Screened Call Transfer: The destination confirms the transfer before you send it.
Unscreened Call Transfer: The line is released after transferring the call without 
confirmation.
Screened Call Transfer to Extension
Unscreened Call Transfer to Extension
PT and SLT 
For PT: Press TRANSFER.
For SLT: Flash the hookswitch.Dial the destination
extension number.
For SLT For PTextension no.
During a conversation;
Hang up or press
SP-PHONE
/MONITOR. Confirmation
tone and
dial toneAnnounce. Wait for 
an answer.Ringback
tone
TRANSFER
The other party is placed on hold.The call is transferred.
PT and SLT 
For PT: Press TRANSFER.
For SLT: Flash the hookswitch.Dial the destination
extension number.
For SLT For PTextension no.
During a conversation;
Hang up or press
SP-PHONE/MONITOR. Confirmation
tone and
dial toneRingback
tone
TRANSFER
Ringing starts at the destination extension. The other party is placed on hold.
The call is transferred. 
						

							Station Features and Operation (DPT/SLT)
User Manual145
Call Transfer using a DSS button
Allows PT users to perform Screened or Unscreened Call Transfer by using a DSS button. 
There are two operations, depending on whether or not One-Touch Transfer
*1 is set.
 
When One-Touch Transfer mode is enabled:
When One-Touch Transfer mode is disabled:
Conditions
Automatic Disconnection
If there is no answer for 30 minutes after Transfer Recall starts, the line will be 
disconnected.
If the destination extension does not answer the call within twelve rings (default), Transfer 
Recall occurs. If the transferred call is an outside call, it is possible to select whether 
Transfer Recall will go to the initiating extension or to Operator 1 by System Programming.
An outside call can be translated directly to a Uniform Call Distribution (UCD) group so 
that an idle extension is automatically hunted by UCD.
*1One-Touch Transfer allows you to hold an outside call and transfer it to an extension by pressing one key. This feature provides 
automatic hold and transfer, without pressing the TRANSFER button. System Programming is required to use this function.
PT
Press DSS (flexible button).
During a conversation;
The other party is placed on hold and the destination extension
is called immediately.
(DSS)
PT
Press DSS (flexible button).
During a conversation;
Press TRANSFER.
TRANSFER (DSS) 
						

							Station Features and Operation (DPT/SLT)
146User Manual

The destination extension shows the Caller ID and the extension number from where the 
call was transferred on the display.
 The Caller ID number 123456789 is transferred from extension 101.
The priority of the display is:
Caller ID name > Caller ID number > Outside line name > Blank (if none of these is 
assigned).
If your telephone has a two, three or six line display, both the Caller ID name and number 
are displayed.
You can change the display to show the original extension number and name by System 
Programming.
A flexible CO button can be assigned as a DSS button.
To use One-Touch Transfer, System Programming is required.
Pressing the FLASH button while dialing clears the display. Then you can enter the 
revised number.
If you want to return to the held call, press the TRANSFER button or corresponding CO, 
INTERCOM button before the destination extension answers.
When Transfer Recall occurs, the display shows:


If you want to return to the held call, flash the hookswitch before the destination 
extension answers.

This feature is not available for ISDN telephones.
Programming Guide References
[108] Automatic Hold by CO / DSS Button
[201] Transfer Recall Time
[990] System Additional Information
User Manual References
2.2.2 Flexible Button Assignment
4.3.84 Uniform Call Distribution (UCD)
101  123456789
RCL: Ext 103 
						

							Station Features and Operation (DPT/SLT)
User Manual147
4.3.26 Call Transfer — to Outside Line
You can transfer a call (intercom, outside) to an outside party via outside line.
Screened Call Transfer
Conditions
Class of Service
Class of Service programming determines the extensions that can perform this feature.
Outside-to-outside call
If an outside call is transferred to an outside party, outside-to-outside call is established 
and the call duration is restricted by a system timer Outside-to-Outside Line Call Duration 
Time (1-64 min).
Hold Recall tone
Hold Recall tone is generated to the extension who transferred the call 50 seconds before 
the time-out.
Hold Alarm tone
Hold Alarm tone is generated to both outside parties 15 seconds before the time-out. The 
call is disconnected at the time-out unless the extension user (who transferred the call) joins 
the outside-to-outside call to establish a conference call.

Pressing the FLASH button while dialing clears the display. Then you can enter the 
revised number.
PT and SLT 
For PT: Press TRANSFER.
For SLT: Flash the hookswitch.Dial the phone
number where
calls will be
transferred.
For SLT For PTphone no.
During a conversation;
Hang up or press
SP-PHONE
/MONITOR. Confirmation
tone and
dial toneRingback toneAnnounce. Wait for
an answer.
line access code
Press CO or enter
a line access code
(9 or 81 through 88).
TRANSFER(CO)
The current call is placed on hold.
The call is transferred. 
						

							Station Features and Operation (DPT/SLT)
148User Manual
If you want to return to the held call, press the TRANSFER button or corresponding CO 
or INTERCOM button before the destination party answers.
If you want to join the conversation after transferring the call or while hold recall tone 
is sent, press the corresponding CO button. A conference call is established.

This feature is not available for ISDN telephones.
Programming Guide References
[206] Outside-to-Outside Line Call Duration Time
[503] Call Transfer to Outside Line
[601] Class of Service
Features Guide References
Hold Recall 
						

							Station Features and Operation (DPT/SLT)
User Manual149
4.3.27 Call Waiting
During a call, a Call Waiting tone informs you that there is another call waiting for you. You 
can answer the second call by disconnecting or placing the current call on hold.
PT users can choose one of three Call Waiting modes.
Setting
Canceling
SLT
PT
Lift the handset or press
SP-PHONE/MONITOR.
Hang up or press
SP-PHONE/MONITOR.Confirmation tone
and dial tone1. Dial 7311.
2. Dial 7312.
3. Dial 7313.
1. Call Waiting BSS
2. Call Waiting OHCA
3. Call Waiting W-OHCA7
7
7
3
3
3
1
1
1
1
2
3
Lift the handset.Hang up.Confirmation tone
and dial tone Dial 7311.
3171

Call Waiting 3 Call Waiting 2 Call Waiting 1 BSS  
OHCA 
W-OHCA: 
: 
: 
PT and SLT 
Lift the handset or press
SP-PHONE/MONITOR.Hang up or press
SP-PHONE/MONITOR.Confirmation tone
and dial tone Dial 7310.
3710

Call Waiting Off 
						

							Station Features and Operation (DPT/SLT)
150User Manual
To talk to the new party by terminating the current call
To talk to the new party by holding the current call
Conditions
BSS / OHCA / Whisper OHCA
If an extension user dials 1 while hearing a busy tone, BSS or OHCA or Whisper OHCA 
may be activated at the called extension.
This is determined by the following conditions.
PTSLT
Talk to the
new caller.
While hearing a Call Waiting tone;
Press the flashing CO 
or INTERCOM.
or
Talk to the 
new caller.
While hearing a Call Waiting tone;
Lift the handset. Hang up.
(CO)INTERCOM
The current call is disconnected.The current call is disconnected.
PT
SLT
Talk to the
new caller. Press the flashing
CO or INTERCOM.
or
Press HOLD.
While hearing the Call Waiting tone and the CO or INTERCOM indicator is flashing rapidly;
Talk to the
new caller.
While hearing a Call Waiting tone;
Lift the
handset. Hang up.Flash the 
hookswitch.Dial toneConfirmation tone
and dial toneDial 50.
HOLD(CO)INTERCOM
50
The current call is placed on hold. The current call is placed on hold.
If both the current call and new call are extension calls,
you will be connected to the new caller simply by pressing HOLD.