Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

KX-TD816C
Model   KX-TD1232C
Digital Super Hybrid System
User Manual
Please read this manual before using Digital Super Hybrid System.
D1232DIGITAL SUPER HYBRID SYSTEM
PanasonicPanasonic
D816DIGITAL SUPER HYBRID SYSTEM
® 

2User Manual
Thank you for purchasing the Panasonic Telephone System. 

System Components
User Manual3
System Components
Model No. Description
Service UnitKX-TD816
KX-TD1232Digital Super Hybrid System (Main Unit)
Te l e p h o n eKX-T7220
KX-T7230
KX-T7235
KX-T7250
KX-T7420
KX-T7425
KX-T7431
KX-T7433
KX-T7436Digital Proprietary Telephone
Digital Proprietary Telephone with 2-line Display
Digital Proprietary Telephone with 6-line Display
Digital Proprietary Telephone
Digital Proprietary Telephone
Digital Proprietary Telephone
Digital Proprietary Telephone with 1-line Display...

Attention
4User Manual
Attention
When using the KX-T7200 and KX-T7400 series, keep the following conditions in 
mind:
• If there is any trouble, unplug the extension line and connect a known working phone. If the 
known working phone operates properly, have the defective phone repaired by a specified 
Panasonic Factory Service Center. If the known working phone does not operate properly, 
check the Digital Super Hybrid System and the internal extension wiring.
 Keep the unit away from heating appliances...

Introduction
User Manual5
Introduction
Who Should Use This Manual
This manual is designed for users of Digital Super Hybrid System KX-TD816 and KX-
TD1232. It is to be used after the system is installed and System Programming is completed. 
The focus is Digital Proprietary Telephones (DPTs);
KX-T7220/KX-T7230/KX-T7235/KX-T7250/KX-T7420/KX-T7425/KX-T7431/
KX-T7433/KX-T7436, Digital DSS Consoles; KX-T7240/KX-T7440/
KX-T7441, Single Line Telephones (SLTs) and their features. The step-by-step procedures...

Introduction
6User Manual
Call Log, Incoming (— Option) allows you to confirm the incoming outside call information 
on the display. You can also call back the caller by selecting one of the memorized numbers. 
This feature is available only for the KX-T7230, KX-T7235, KX-T7433 and KX-T7436. 
Call Log, Outgoing redials by selecting one of the last five outside calls you made, according 
to the number information on the display. This feature is available only for KX-T7436 and KX-
T7235.
Conference,...

Introduction
User Manual7
describe each operation and illustration. Use the new programmed number if you have changed 
a flexible feature number. The lists of fixed numbers and default flexible feature numbers are 
shown in the Appendix.
If you use a dial pulse (DP) type single line telephone (SLT);
It is not possible to access features that have   or # in their feature numbers. 
To n e s
Various tone types, such as Confirmation tone, Dial tone, Call Waiting tone, etc. are explained 
in the Appendix....

Introduction
8User Manual
This Class A digital apparatus complies with Canadian ICES-003.
Notice:
The Industry Canada label identifies certified equipment. This certification means that the 
equipment meets telecommunications network protective, operational and safety requirements 
as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). 
The Department does not guarantee the equipment will operate to the users satisfaction.
Before installing this equipment, users should...

Introduction
User Manual9
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
AV I S :
Létiquette dIndustrie Canada identifie le matériel homologué. Cette étiquette certifie que le 
matériel est conforme aux normes de protection, dexploitation et de sécurité des réseaux de 
télécommunications, comme le prescrivent les documents concernant les exigences techniques 
relatives au matériel terminal. Le Ministère toutefois nassure pas que le matériel fonctionnera 
à la...

Table of Contents
10User Manual
Table of Contents
1 DPT Overview
1.1 Configuration ...............................................................................................................16
1.1.1 Configuration ..............................................................................................................16
1.1.2 Location of Controls ................................................................................................... 17
1.1.3 Connection...