Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

DPT Overview
User Manual31
Flexible Buttons 
Flexible Buttons do not have specific features permanently assigned to them. Features are 
assigned to Flexible Buttons through System or Station Programming. Flexible Button 
Assignment is addressed in Station Programming. The three types of Flexible Buttons are 
as follows: 
Flexible CO buttons (located on PT only) 
Flexible DSS buttons (located on DSS Console only) 
Programmable Feature (PF) buttons (located on DSS Console, KX-T7240, only) 
The following...

DPT Overview
32User Manual
   indicates that the feature is available.
Line Access Buttons 
The following three types of CO buttons can be used to seize a outside line when making a call. 
Single-CO (S-CO) button
Group-CO (G-CO) button
Loop-CO (L-CO) button
Conditions
A flexible CO button can be assigned as a Line Access Button (S-CO, G-CO or L-CO) in 
either System/Station Programming. Once a flexible CO button is assigned as a Line Access 
Button, it provides the line status condition by lighting...

DPT Overview
User Manual33
Group-CO (G-CO) button
To support efficient utilization of outside lines, a group of outside lines (outside line group) can 
be assigned to a CO button. This button is referred to as Group-CO (G-CO) button. Any 
incoming calls from any outside line in the same trunk group arrive at the G-CO button. To 
make a outside call, you can access an idle outside line in the trunk group by simply pressing 
the assigned G-CO button. 
Conditions
It is possible to assign the same outside...

DPT Overview
34User Manual
1.1.5 Initial Setting for KX-T7400 Series
The Jog Dial can be used for the display contrast and the volume control. Rotate the Jog Dial 
in either direction as desired. The contrast or the volume level will change as follows.
Display Contrast Adjustment 
The MODE button and the Jog Dial for KX-T7431 users, and a Soft button and the Jog Dial 
for KX-T7433 and KX-T7436 users are used to adjust the display contrast. The contrast level 
is indicated on the display by the number of...

DPT Overview
User Manual35
When using the headset
The Panasonic Digital Super Hybrid System supports the use of a headset with a proprietary 
telephone (PT). When you use the headset (optional), you should switch the selection mode 
first. Selection is explained in the Handset / Headset Selection in Station Programming. 
To change to the headset mode
Press: [PROGRAM] [9] [9] [9] [2] [STORE] [PROGRAM]. 
Changing the ringing tone of a CO button / Intercom calls 
There are eight ringer frequencies available...

DPT Overview
36User Manual
To adjust the headset volume
To adjust the ringer volume
SP-PHONE
Display PT
Press SP-PHONE.
Rotate Jog Dial in the desired direction.

Headset:***
(-volume level 3) Be sure the headset is connnected.
7433 / 7436
Rotate Jog Dial in desired direction.

Ringer:***
(-volume level 3) While the telephone is ringing;
S 1
S 2
S 3
RING
7433 / 7436
Press RING (S2).
While the telephone is idle and on-hook;
The telephone will ring.
Rotate Jog Dial in the desired direction.
The telephone...

DPT Overview
User Manual37
To adjust the speaker volume
MODE
7431
Press MODE five times.
Rotate Jog Dial in the desired direction.

Ringer:***
(-volume level 3) While the telephone is idle and on-hook;
The telephone will stop ringing in about 4 seconds.
When the volume level is 0, no * is indicated.
OFF        HIGH
LOW
7420 / 7425
Adjust the RINGER Volume Selector lever to 
the desired setting (OFF/LOW/HIGH).
SP-PHONE
74XX
Press SP-PHONE.
Rotate Jog Dial in the 
desired direction.

SP:************...

DPT Overview
38User Manual
Conditions
If the ringer volume of the KX-T7431 is set to OFF, the display while on-hook is as 
follows.
By pressing  , the display changes to show your extension number and name.
Ring Off 12:00P
101: john Smith 

DPT Overview
User Manual39
1.1.6 Initial Setting for KX-T7200 Series 
Display Contrast Adjustment (KX-T7230 and KX-T7235 only)
A Soft button and the VOLUME Control button are used to adjust the display contrast. The 
contrast level is indicated on the display by the number of asterisks. You can adjust the contrast 
level under the following conditions: 
a)When on-hook, or 
b)During an outside/intercom call. 
When using the headset
The Panasonic Digital Super Hybrid System supports the use of a headset...

DPT Overview
40User Manual
If your digital proprietary telephone is provided with a display (display DPT), the volume level 
is indicated on the display by the number of asterisks. For ringer volume adjustment, three 
levels (OFF/LOW/HIGH) are available with the KX-T7220 and KX-T7250. 
To adjust the handset receiver volume
To adjust the headset volume
VOLUME
Display PT

Handset:***
(-volume level 3)
You may also adjust the handset receiver volume
during a conversation using the handset receiver.
Press...