Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

Station Programming
User Manual51
Station Programming [Function Assignment]
(Preferred Line Assignment - Outgoing)
(Preferred Line Assignment 
- Incoming)
(Full One-Touch Dialing Assignment)
(Intercom Alert Assignment)
(Call Waiting Tone Type Assignment)
(Self-Extension Number Confirmation)
(Live Call Screening Mode Set)
(Initial Display Selection)
(Bilingual Display Selection)
(Handset / Headset Selection)
(Remote Station Lock Control)
- see Operator / Manager Service Features (Section 4.4)
(Call Log...

Station Programming
52User Manual
2.2 Station Programming
2.2.1 Initial Settings
The original setting are shown in bold letters in the shaded boxes. Find and mark your desired 
selections for programming.
— Be sure that you are in the Station Programming mode : Press [PROGRAM] [9] [9].
Preferred Line Assignment
– Outgoing
Which line do you prefer to
seize when you go off-hook
to make calls? 
To enter the programme mode
Item Selection Programming Input
No line
An idle outside line
A pre-assigned outside...

Station Programming
User Manual53
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Initial Display Selection
Which display do you prefer
when a call is received?
18
8Outside line name
DID extension name
Caller ID
2
3
181
1
Item Selection Programming Input
RingingIntercom Alert Assignment
Which way do you prefer to
receive an intercom call?Directly – the partys voice is
heard without ringing.
No.  Use the same tone.
(Call Waiting Tone 1)Call Waiting Tone Type Assignment
Yes....

Station Programming
54User Manual
2.2.2 Flexible Button Assignment
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
To continue
Press the desired
Flexible (CO, DSS 
or PF) button you 
wish to assign as
the Account button.Follow programming 
input.Press STORE.
Live Call Screening *2
ButtonProgrammable ButtonProgramming InputCO
Direct Station Selection  (DSS)
One-Touch Dialing
MESSAGE
FWD/DND...

Station Programming
User Manual55
Conditions
*1  , #, FLASH, PAUSE, SECRET (INTERCOM) and — (CONF) can also be stored.
– If you do not want to display the stored number, press the SECRET (INTERCOM) button 
before and after the numbers you wish to conceal.
– If you store an external partys number, you should first store a line access number (9, 81 
to 88).
– If you need to enter an account code, you can enter the specified account code before the 
line access number.

*
2 This button is used for the...

Station Programming
56User Manual
2.2.3 Phantom Extension Ringing On/Off Set
Allows you to assign a ringing On/Off function on a Phantom button (default: On).
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.

Ring On
PT
Press Phantom you
wish to turn On/Off the 
ringing.Dial 1or 2.
-1: Ring Off
-2: Ring Onor
Press STORE. Press the same Phantom
again.
12
AUTO DIAL
(Phantom)
STORE
The STORE...

Station Programming
User Manual57
2.2.4 Ringing Tone Selection for CO Buttons
Allows you to assign a ringer frequency to each CO (default: tone type 2).
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Press CO button
which you wish to
change the ringing tone.Press STORE. Press the same 
CO button again.Enter the tone type number
(1 through 8). 
tone type no.AUTO DIAL
STORE
The display shows the...

Station Programming
58User Manual
2.2.5 Ringing Tone Selection for Intercom Calls
Allows you to assign a ringer frequency for intercom call (default: tone type 3).
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
The display shows the current
status.
The display shows the selected tone type number and you hear
the selected tone until the STORE button is pressed.

(-x:tone type number)
If you want...

Station Programming
User Manual59
2.2.6 Self-Extension Number Confirmation
Allows you to display your extension port physical number and extension number.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9]. 
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Dial 6.
Press HOLD (END).
6HOLDPT
The display shows the initial programming
mode. 
extension port
physical number
Jack01EXT101 

Station Programming
60User Manual
2.2.7 Station Programming Data Default Set
Allows you to return each of the following items assigned by Station Programming to their 
default settings.
a)Bilingual Display Selection (default: English)
b)Call Waiting Tone Type Assignment (default: Tone 1)
c)Full One-Touch Dialing Assignment (default: on)
d)Handset/Headset Selection (default: Handset)
e)Initial Display Selection (default: Caller ID)
f)Intercom Alert Assignment (default: Ring Call)
g)Live Call Screen Mode...