Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

Station Features and Operation (DPT/SLT)
User Manual101
Note
Enter the desired value in the % space. You must make an entry in all of the %s using 0 
through 9, # or  .
Any Telephone
DISPLAY MESSAGEPARAMETER
1Will Return Soon None
None
None
MESSAGE NO.
2Gone Home
extension no.
Dial extension number.
hour
Enter hour (00 through 23) and minute (00 through 59).
minute
month
Enter month (01 through 12) and day (01 through 31).
day
3At Ext %%%
4Back at %%:%%(time)
5Out Until %%/%%  (month/day)
6In a Meeting...

Station Features and Operation (DPT/SLT)
102User Manual
Canceling the absent message
Conditions
All nine messages can be programmed either by User or System Programming.

The message you select is shown on the display of your PT whenever you go off-hook.
Regarding Message 3;
a) If the extension number you want to enter has more than the number of % characters, 
refer to System Programming to change the setting.
b) If the extension number you want to enter has less than the number of % characters,...

Station Features and Operation (DPT/SLT)
User Manual103
4.3.2 Account Code Entry
An Account Code is used to identify outside calls for accounting and billing purposes. The 
account code is appended to the Station Message Detail Recording (SMDR) call record. For 
incoming outside calls, account code are not required. For outgoing outside calls, you may be 
required to enter an account code.
Your Account Code Entry mode is set to one of the following three modes by System 
Programming.
In Verified - All...

Station Features and Operation (DPT/SLT)
104User Manual
Entering account codes before dialing
7230 / 7235 / 7433 / 7436
Confirmation tone
and dial toneOff-hook.
Dial the phone
number. Press CO.Press ACCNT (S3).
Dial #.
CO
ACCNT
S1S2S3account code
Enter an account code
(10 digits max., 0...9).Dial tone 3*

One of the dial tones. Refer to the 
Tone List in the Appendix.*
One of the dial tones. Refer to the Tone List in the Appendix.*
Enter ACCNT Code
Any Telephone
account code
Enter an account code
(10...

Station Features and Operation (DPT/SLT)
User Manual105
Entering account codes during or after a conversation
During a conversation or within 15 seconds after the other party hangs up;
Conditions
In Verified - All Calls mode, you must always enter a pre-assigned account code when 
making any of the following calls.
a)Call Forwarding — to Outside Line
b)Manual Dialing (Selecting an outside line)
c)One-Touch Dialing
d)Pickup Dialing (Hot Line)
e)Station Speed Dialing
f)System Speed Dialing
If you use...

Station Features and Operation (DPT/SLT)
106User Manual

Pressing the Account button (flexible button) while entering an account code cancels the 
entry.
If an entered account code does not match the pre-assigned account code, in the verified-
all calls mode or the verified-toll restriction override mode;
a) When making an outside call, a reorder tone is returned.
b) During a conversation, the code entry is accepted and the call is maintained (= Option 
mode).
c) After a CPC signal
*1 has been...

Station Features and Operation (DPT/SLT)
User Manual107
4.3.3 Alternate Calling — Ring / Voice
You can voice-announce your intercom call or have the called extension ring. When you make 
an intercom call by voice-announcement, the other party hears your voice over the built-in 
speaker of PT and can speak in the hands-free mode.
Alternating (to Voice-Calling mode)
Alternating (to Ring-Calling mode)
Any Telephone
7230 / 7235 / 7433 / 7436
If the extension you are calling is in Ring-Calling mode, you hear...

Station Features and Operation (DPT/SLT)
108User Manual
Alternating (to Ring-Calling mode)
Conditions
Voice-signaling is not available in the following cases:
— if the other extension is an SLT.
— if the other extension is busy on another call.
— if another call is ringing on the other extension. 
One time switching
You can switch the desired calling mode only once during a call.
If the party you are calling is using a single line telephone (SLT), only Ring-Calling mode 
is available.

Mode...

Station Features and Operation (DPT/SLT)
User Manual109
4.3.4 Answering, Direct Outside Line [PT only]
You can answer an outside call by pressing a flashing a CO button directly. You do not have to 
lift the handset or press the SP-PHONE/MONITOR button.
To answer an incoming outside call
Conditions
You can choose the desired line to answer when more than one call is ringing on your PT 
by this feature.
There are three types of CO buttons: Group-CO (G-CO) button, Loop-CO (L-CO) button 
and Single-CO...

Station Features and Operation (DPT/SLT)
110User Manual
4.3.5 Automatic Callback Busy (Camp-On)
Allows you to set to receive callback ringing when the dialed line becomes idle. When you 
answer the callback ringing;
For an extension: The called extension starts ringing without dialing.
For an outside line: The line is seized.
Setting
PT and SLT
7230 / 7235 / 7433 / 7436
Dial 6. Hang up or press
SP-PHONE/MONITOR.Confirmation tone
and reorder tone
If you hear a busy tone after making a call  (intercom or...