Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

Station Features and Operation (DPT/SLT)
User Manual111
Answering an intercom recall
Answering an outside line recall
Canceling
PT and SLT
If you hear the telephone ringing;
Lift the handset or press SP-PHONE/MONITOR.

extension number
You hear a ringback tone and the other extension begins to
ring automatically.
xxxx:  Free
PT and SLT
Dial the phone number. Dial tone
If you hear the telephone ringing;
Lift the handset or press 
SP-PHONE/MONITOR.
phone no.

outside line number
COXX:  Free
PT and SLT
Lift...

Station Features and Operation (DPT/SLT)
112User Manual
Conditions
If you do not answer the recall ringing within 10 seconds (four callback ring signals), this 
feature will be automatically canceled.
If the called party becomes busy again after the callback ringing starts, the ringing stops but 
this feature will be executed again when the extension becomes free.
With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can set and cancel this 
feature using the display operation.

This feature is not...

Station Features and Operation (DPT/SLT)
User Manual113
4.3.6 Background Music (BGM) [PT only]
You can hear background music through the built-in speaker of your PT. An external music 
source, such as a radio, must be connected. The music stops whenever a call comes in or when 
you go off-hook.
Setting / Canceling
Conditions
Turning on/off
You can turn on/off the BGM only when your PT is not in use.
Programming Guide References
[803] Music Source Use
[990] System Additional Information
PT
7230 / 7235 /...

Station Features and Operation (DPT/SLT)
114User Manual
4.3.7 Busy Station Signaling (BSS)
You can prompt a busy extension (ringing or during a call) to answer your call. The other 
extension hears three beeps and knows that you are waiting.
Conditions
BSS / OHCA / Whisper OHCA
If an extension user dials 1 while hearing a busy tone, BSS or OHCA or Whisper OHCA 
may be activated at the called extension. 
This is determined by the following conditions. 
Calling extension Called extension
COS-OHCA...

Station Features and Operation (DPT/SLT)
User Manual115
To answer the signal from the calling extension, see 4.3.27 Call Waiting.
If BSS is not displayed or you hear a reorder tone when you set this feature, this feature 
will not be set at the called party. This feature is only available if the called extension has 
set the Call Waiting feature.
Only the extensions which have enabled Call Waiting can receive Call Waiting tones.
Depending on the partys telephone, the Off-Hook Call Announcement (OHCA)...

Station Features and Operation (DPT/SLT)
116User Manual
4.3.8 Call Forwarding — SUMMARY
Automatically transfers incoming calls to another extension or to an external destination. The 
following types are available:
Note
You can also set Voice Mail as the forwarding destination. Refer to 4.3.85 Voice Mail 
Integration.
Conditions
To cancel Call Forwarding features, refer to 4.3.15 Call Forwarding — CANCEL.
Forwarded call is not forwarded furthermore
Call Forwarding can only be extended to one target...

Station Features and Operation (DPT/SLT)
User Manual117
Two extensions can set each other as the destination extension. In this case, an intercom call 
to the other party while he/she is absent will not be forwarded back to the original extension.
Confirmation tone
Confirmation tone 2 (two beeps) is sent when the previously programmed data is same as 
the new data. If it is not, confirmation tone 1 (one beep) is sent. Refer to the Tone List in 
the Appendix.
You can call the original extension from...

Station Features and Operation (DPT/SLT)
118User Manual
4.3.9 Call Forwarding — All Calls
All of calls coming to your extension are forwarded to the pre-assigned extension 
automatically.
Setting
PT and SLT
Lift the handset
or press
SP-PHONE/MONITOR.For PT: Press FWD/DND.
For PT, SLT: Dial 710.
Hang up or press 
SP-PHONE/MONITOR.
Confirmation
tone and 
dial tone Dial 2. Enter the destination
extension number.
extension no.For PT, SLTFor PT7102
FWD/DND

extension number where
the call is to be forwarded...

Station Features and Operation (DPT/SLT)
User Manual119
4.3.10 Call Forwarding — Busy
You can forward calls to another extension when your extension is busy.
Setting
PT and SLT
Lift the handset 
or press 
SP-PHONE/MONITOR.For PT: Press FWD/DND.
For PT, SLT: Dial 710.
Hang up or press 
SP-PHONE/MONITOR.
Confirmation 
tone and 
dial tone Dial 3. Enter the destination 
extension number.
extension no.For PT, SLTFor PT7103
FWD/DND
F4
F5FWD-Busy    (→ext)
7235 / 7436
FWD/DNDextension no.
Lift the handset or...

Station Features and Operation (DPT/SLT)
120User Manual
4.3.11 Call Forwarding — No Answer
Your calls are forwarded to another extension when you do not answer the call within a pre-
determined time.
Setting
PT and SLT
Lift the handset 
or press 
SP-PHONE/MONITOR. 
Hang up or press  
SP-PHONE/MONITOR.
Confirmation
tone and
dial tone Dial 4. Enter the destination
extension number.
extension no.4
For PT: Press FWD/DND.
For PT, SLT: Dial 710.
For PT, SLTFor PT710
FWD/DND

extension number where
the call is...