Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

User Programming
User Manual91
3.2.6 [017] DISA User Codes
Description
Assigns the Direct Inward System Access (DISA) User Codes and a Class of Service (COS) to 
each code. The code COS determines the toll restriction level of the DISA caller.
Wa r n i n g
When you enable the Outside-Outside Line Call feature of DISA function, if a third party 
discovers the password (a DISA User Code) of the system, you have a risk that they will make 
illegal phone calls using your telephone line, and the cost may be...

User Programming
92User Manual
Programming
Conditions
This setting is required if Trunk (Outside line) Security mode is selected in program [809] 
DISA Security Type.
Each code should be unique and composed of four through ten numerical digits, 0 through 
9.
User Manual References
4.3.34 Direct Inward System Access (DISA)
Display PT
Dial 017. Enter a DISA user code number (01-32).
017DISA user code no.
  
User Code NO?→
 [When SELECT is pressed]
Repeat these steps
Enter a DISA user 
code (Blank or 4-10...

Station Features and Operation (DPT/SLT)
User Manual93
Section 4
Station Features and Operation (DPT/SLT) 

Station Features and Operation (DPT/SLT)
94User Manual
4.1 Before Operating
4.1.1 Before Operating
What kind of telephone do you use?
In this manual, you will find your way to operate the feature depending on the telephone you 
use. Please use the proper operation for your telephone.
 
If you use a Panasonic proprietary telephone which has the special function button and/or 
the display, you will follow the operation with the button or display for easy access.
If you use a Panasonic proprietary...

Station Features and Operation (DPT/SLT)
User Manual95
Operation Step Box
In this section, operations for extension users are described using the following Operation Step 
Box.
Note
If your telephone is not noted in the operating step box (ex., only PT is noted), this means 
your telephone does not have the ability to execute that feature.
If your telephone has the ability to perform several operations for one feature, you can select 
the method according to your needs.
In this manual, the default...

Station Features and Operation (DPT/SLT)
96User Manual
Flash the hookswitch on a single line telephone.
Tones which vary depending on the condition (Refer to 6.1.3 Tone List). 

Station Features and Operation (DPT/SLT)
User Manual97
4.2 Basic Operations
4.2.1 Making Calls 
Intercom Calling
You can make a call to another extension.
Outward Dialing
You can make a call to an outside party using one of the following line access methods.
a)Line Access, Automatic (default: 9)
b)Line Access, Individual (CO button)
c)Line Access, Outside Line Group (default: 81 through 88)
Any Telephone
The INTERCOM indicator light turns green.
Lift the handset or press 
SP-PHONE/MONITOR.Dial extension...

Station Features and Operation (DPT/SLT)
98User Manual
Conditions

There are four types of Line Preference for outgoing calls (— Idle Line/No Line/Prime 
Line/Prime INTERCOM Line). Each preference can be selected by Station or System 
Programming.
With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can execute the 
Intercom Calling feature to extensions by using the Extension Dialing display 
feature.
Helpful hints for the Handsfree (speakerphone) operation are noted in the Handsfree 
Operation...

Station Features and Operation (DPT/SLT)
User Manual99
4.2.2 Receiving Calls
Conditions

There are three types of Line Preference for incoming calls (— No Line/Prime Outside 
Line/Ringing Line). Each preference can be selected by Station Programming.
Helpful hints for the Handsfree (speakerphone) operation are noted in the Handsfree 
Operation feature.
Programming Guide References
[400] Outside Line Connection Assignment
[603-604] DIL 1:N Extension and Delayed Ringing —— Day / Night
User Manual...

Station Features and Operation (DPT/SLT)
100User Manual
4.3 Station Features and Operation
4.3.1 Absent Message Capability
You can select one of nine pre-programmed Absent Messages (1-9) for your extension. The 
display PT users calling your extension see the message you select. Absent messages are used 
to inform the party calling to your extension of the reason for your absence. By default, 
Messages No. 1-6 are provided with default messages and the other three messages are left 
blank.