Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

Station Features and Operation (DPT/SLT)
User Manual141
4.3.23 Call Pickup Deny
Allows you to prevent another extension from picking up your calls with the Call Pickup 
feature.
Setting / Canceling
Conditions

With the KX-T7431, KX-T7433, KX-T7436 or KX-T7235, you can execute this feature 
using the display operation.
User Manual References
4.3.20 Call Pickup, Directed
4.3.21 Call Pickup, Group
4.3.22 Call Pickup, Outside Line
4.5.9 KX-T7235 Display Features - System Feature Access Menu
4.5.12 KX-T7431...

Station Features and Operation (DPT/SLT)
142User Manual
4.3.24 Call Splitting
Allows you to have two callers on a line and alternate between them. If a call comes in while 
you are already on the line, you can place the current call (1st call) on hold and have a 
conversation with the other party (2nd call).
When you are engaged in the 2nd call (inside/outside), while placing the 1st call (inside/
outside) on hold temporarily (Consultation Hold
*1)
When you are engaged in the 2nd call (inside), while...

Station Features and Operation (DPT/SLT)
User Manual143
Features Guide References
Consultation Hold
User Manual References
4.3.16 Call Hold
4.3.17 Call Hold, Exclusive [PT only] 

Station Features and Operation (DPT/SLT)
144User Manual
4.3.25 Call Transfer — to Extension
Allows you to transfer the call you received to another extension. There are two ways.
Screened Call Transfer: The destination confirms the transfer before you send it.
Unscreened Call Transfer: The line is released after transferring the call without 
confirmation.
Screened Call Transfer to Extension
Unscreened Call Transfer to Extension
PT and SLT 
For PT: Press TRANSFER.
For SLT: Flash the hookswitch.Dial the...

Station Features and Operation (DPT/SLT)
User Manual145
Call Transfer using a DSS button
Allows PT users to perform Screened or Unscreened Call Transfer by using a DSS button. 
There are two operations, depending on whether or not One-Touch Transfer
*1 is set.
 
When One-Touch Transfer mode is enabled:
When One-Touch Transfer mode is disabled:
Conditions
Automatic Disconnection
If there is no answer for 30 minutes after Transfer Recall starts, the line will be 
disconnected.
If the destination...

Station Features and Operation (DPT/SLT)
146User Manual

The destination extension shows the Caller ID and the extension number from where the 
call was transferred on the display.
 The Caller ID number 123456789 is transferred from extension 101.
The priority of the display is:
Caller ID name > Caller ID number > Outside line name > Blank (if none of these is 
assigned).
If your telephone has a two, three or six line display, both the Caller ID name and number 
are displayed.
You can change the...

Station Features and Operation (DPT/SLT)
User Manual147
4.3.26 Call Transfer — to Outside Line
You can transfer a call (intercom, outside) to an outside party via outside line.
Screened Call Transfer
Conditions
Class of Service
Class of Service programming determines the extensions that can perform this feature.
Outside-to-outside call
If an outside call is transferred to an outside party, outside-to-outside call is established 
and the call duration is restricted by a system timer Outside-to-Outside...

Station Features and Operation (DPT/SLT)
148User Manual
If you want to return to the held call, press the TRANSFER button or corresponding CO 
or INTERCOM button before the destination party answers.
If you want to join the conversation after transferring the call or while hold recall tone 
is sent, press the corresponding CO button. A conference call is established.

This feature is not available for ISDN telephones.
Programming Guide References
[206] Outside-to-Outside Line Call Duration Time
[503]...

Station Features and Operation (DPT/SLT)
User Manual149
4.3.27 Call Waiting
During a call, a Call Waiting tone informs you that there is another call waiting for you. You 
can answer the second call by disconnecting or placing the current call on hold.
PT users can choose one of three Call Waiting modes.
Setting
Canceling
SLT
PT
Lift the handset or press
SP-PHONE/MONITOR.
Hang up or press
SP-PHONE/MONITOR.Confirmation tone
and dial tone1. Dial 7311.
2. Dial 7312.
3. Dial 7313.
1. Call Waiting BSS
2. Call...

Station Features and Operation (DPT/SLT)
150User Manual
To talk to the new party by terminating the current call
To talk to the new party by holding the current call
Conditions
BSS / OHCA / Whisper OHCA
If an extension user dials 1 while hearing a busy tone, BSS or OHCA or Whisper OHCA 
may be activated at the called extension.
This is determined by the following conditions.
PTSLT
Talk to the
new caller.
While hearing a Call Waiting tone;
Press the flashing CO 
or INTERCOM.
or
Talk to the 
new caller....